Terminal log file
Date: 22.02.2021 - 14:41:39
-----------------------------------------------
Checking DDR......OK
UBL Version: 1.46t(DM365)11:07:41 Jul 24 2017
Oscillator: 24MHZ
ARM Rate: 432 MHZ
DDR Rate: 340 MHZ
BootMode: SPI
Starting SPI Memory Copy...
DONE
U-Boot 1.3.6 (jerry) (Jul 24 2017 - 11:11:23)
DRAM: 128 MB
SF: Got idcode c2 20 18 c2 20
In: serial
Out: serial
Err: serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading:
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading:
Retry count exceeded; starting again
==>use default images
APP_OFFSET_NEW test
.......
## Booting kernel from Legacy Image at 80007fc0 ...
Image Name: Linux-2.6.18_pro500-davinci_evm-
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1771444 Bytes = 1.7 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux...................................................................................................................... done, booting the kernel.
Linux version 2.6.18_pro500-davinci_evm-arm_v5t_le (jenkins@centos235) (gcc version 4.2.0 (MontaVista 4.2.0-16.0.32.0801914 2008-08-30)) #1 PREEMPT Fri Jun 22 11:46:45 CST 2018
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: DaVinci DM365 EVM
new hwid:VTH1510CH:0:4:2:0:5:4:1:9:3:3:1:1B0:0:0:0:6:0:0:1
Memory policy: ECC disabled, Data cache writeback
DaVinci DM0365 variant 0x8
prediv = 6, pll0_mult = 85, postiv = 1, pll_div4 = 4, pll_rate = 680000000, pll_div6 = 25
PLL0: fixedrate: 24000000, commonrate: 170000000, vpssrate: 340000000 PLL1_ARMRATE = 340000000
PLL0: vencrate_sd: 27200000, ddrrate: 340000000 mmcsdrate: 136000000
##: prediv = 1, pll1_mult = 9, postdisv = 1, pll-rate = 432000000, pll_div2 = 1, pll_div4 = 21, pll-div5 = 16
PLL1: armrate: 432000000, voicerate: 20571428, vencrate_hd: 27000000, ddrratePLL2 = 432000000
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists. Total pages: 24320
dh_keyboard:0
PID hash table entries: 512 (order: 9, 2048 bytes)
Clock event device timer0_0 configured with caps set: 07
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 95MB = 95MB total
Memory: 92464KB available (2948K code, 717K data, 172K init)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
MUX: initialized SPI0_SDENA0
DaVinci: 104 gpio irqs
MUX: initialized GPIO20
MUX: initialized I2C_SCL
pMem_relimitBaseAddr:0xc6000000
Generic PHY: Registered new driver
configured buff delay: 50
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
product has no spi2 device.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
LTT : ltt-facilities init
LTT : ltt-facility-core init in kernel
davinci_wdt_init proc enable
rtc probe addr 0x68, probeByte 0x00...
RTC_i2c_attach_client:addr:0x68
== Found RTC chip DS1338, I2C addr 0x68 ==
rtc probe addr 0x6f, probeByte 0x00...
rtc probe addr 0x57, probeByte 0x00...
rtc probe addr 0x32, probeByte 0x00...
DS1338 driver v1.04sem proc enable,
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
&&&: uart_add_one_port, line = 0, uartclk = 0
&&&: uart_add_one_port, line = 1, uartclk = 170000000
ttyS0: autoconf (0x0000, 0xfbc20000): <6>serial8250.0: ttyS0 at MMIO map 0x1c20000 mem 0xfbc20000 (irq = 40) is a 16550A
&&&: uart_add_one_port, line = 0, uartclk = 24000000
ttyS1: autoconf (0x0000, 0xfbd06000): <6>serial8250.0: ttyS1 at MMIO map 0x1d06000 mem 0xfbd06000 (irq = 41) is a 16550A
&&&: uart_add_one_port, line = 1, uartclk = 170000000
Broadcom BCM5411: Registered new driver
Broadcom BCM5421: Registered new driver
Broadcom BCM5461: Registered new driver
Broadcom BCM5481: Registered new driver
Broadcom BCM54811: Registered new driver
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Linux video capture interface: v2.00
i2c /dev entries driver
System bootup mode:SPI
JECDEC ID : 0xc22018
ext_jedec ID : 0xc220
chip id mx25l12805d
found mx25l12805d in table.
m25p80 spi0.0: mx25l12805d (16384 Kbytes)
Creating 10 MTD partitions on "spi0.0":
0x00000000-0x00040000 : "bootloader"
0x00040000-0x00060000 : "HWID"
0x00060000-0x00260000 : "kernel"
0x00260000-0x003e0000 : "web"
0x003e0000-0x006e0000 : "rootfs"
0x006e0000-0x006f0000 : "product"
0x006f0000-0x00da0000 : "user"
0x00da0000-0x00ec0000 : "data"
0x00ec0000-0x00f60000 : "backup"
0x00f60000-0x01000000 : "config"
dm_spi.0: davinci SPI Controller driver at 0xc6266000 (irq = 42) use_dma=0
[*****geyj******1]register master =0xc5ccb800;bus_num = 0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver asix
usbcore: registered new driver cdc_ether
usbcore: registered new driver net1080
usbcore: registered new driver zaurus
musb_hdrc: version 6.0, pio, host, debug=0
musb_hdrc: USB Host mode controller at c6268000 using PIO, IRQ 12
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
u32 classifier
Performance counters on
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Time: timer0_1 clocksource has been installed.
Clock event device timer0_0 configured with caps set: 08
Switched to high resolution mode on CPU 0
IP-Config: No network devices available.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing init memory: 172K
init started: BusyBox v1.9.1 (2017-06-12 16:54:28 CST)
starting pid 193, tty '': '/etc/init.d/dnode'
2.64s
starting pid 198, tty '': '/etc/init.d/rcS'
cp: cannot stat '/sbin/telnetd': No such file or directory
Sat Jan 8 01:50:13 2000 0.000000 seconds
[0;32;32m[gpio] initialize success, build at 11:49:17, Jun 22 2018[m[0;32;32m[gpio] CMD=9, Setting product type: 0
[m[0;32;32m[libdv[0;32;32m[gpio] CMD=4, Setting product fchip: 0
[mr]
libdvr.so B[0;32;32m[gpio] CMD=3, Setting hardware version: 1
[muild time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[mGIO_SET_PRODUCT_TYPE = 9
[0;32;32m[gpio] SD card hardware reset is done, gio55=0.
[mcurrent wdt period=5000 ms
4.29s
[0;32;32current wdt period=25000 ms
m[libdvr]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[m[syshelper] V1.21(no exit): startup time=25 s, appauto=0, hctosystime=1500,type=0
[syshelper] start watch dog success, period is 25000 ms.
coremnt not found
7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18
Extracting cmemk.ko
Extracting davinci_emac.ko
Extracting display.ko
Extracting dm365mmap.ko
Extracting dm365_ad.ko
Extracting edmak.ko
Extracting evdev.ko
Extracting getjif.ko
Extracting h3ak.ko
Extracting i2ckey.ko
Extracting irqk.ko
Extracting mmc_blk.ko
Extracting mmc_core.ko
Extracting mmc_drv.ko
Extracting mymemcpy.ko
Extracting pwm.ko
Extracting Sensor.ko
Extracting sound.ko
Extracting spi_mcu.ko
Extracting touch_panel_ctrl.ko
Extracting vpbek.ko
Extracting vpfek.ko
Everything is Ok
/mnt/mtd/Config/ppp
7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18
Extracting sshd
Everything is Ok
7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18
Extracting VideoDaemon
Everything is Ok
7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18
Extracting sonia
Everything is Ok
/mnt/mtd/Config/ppp
Davinci EMAC MII Bus: probed
[0;32;32m[libdvMAC address is 3C:EF:8C:42:40:D1
r]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[mTI DaVinci EMAC Linux version updated 4.0
20.15s
20.16s
[0;32;32m[libdvr]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[m[0;32;32m[libdvr]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[mCMEMK module: built on Apr 14 2010 at 13:45:45
cmem= 96
Reference Linux version 2.6.18
File /workspace/dm365/dvsdk_2_10_01_18_guangpan/linuxutils_2_24_03/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
allocated heap buffer 0xc7000000 of size 0x2000000
CMEM Range Overlaps Kernel Physical - allowing overlap
CMEM phys_start (0x1000) overlaps kernel (0x80000000 -> 0x85f00000)
cmemk initialized
IRQK module: built on Apr 14 2010 at 13:46:34
20.46s
Reference Linux version 2.6.18
File /workspace/dm365/dvsdk_2_10_01_18_guangpan/linuxutils_2_24_03/packages/ti/sdo/linuxutils/irq/src/module/irqk.c
irqk initialized
EDMAK module: built on Apr 14 2010 at 13:46:46
Reference Linux version 2.6.18
File /workspace/dm365/dvsdk_2_10_01_18_guangpan/linuxutils_2_24_03/packages/ti/sdo/linuxutils/edma/src/module/edmak.c
getjif init @ 091230
##: HZ = 10
register getjif driver successful !
[0;32;32m[spi_smlt] Serving For product VTH1580/VTH1510CH by spi simulate.
[m[0;32;32m[spi_smlt] initialize success, build at 11:49:15, Jun 22 2018
[m[0;32;32m[spi_smlt] delay 10us
[m[1;33m[touchKey] WARN : product VTH1510CH not found, Now Serving For Default product VTH1510
[m[0;32;31m[touchKey] ERROR (/home/jenkins/jk_slave/workspace/.pcicache/ZW_DH3.1912_VTH_2.X/tmp_build_dir/i2ckey/build/../src/sx86x6.c|sx86x6_init|857): sx86x6_i2c_init.
[m
insmod: cannot i[0;32;32m[VPBE] VPBE Build on Jun 22 2018 at 11:49:23.
[mnsert '/var/lib/[0;32;32m[VPBE] SVN NUM: 8034.
[mmodules/i2ckey.ko': Operation not permitted
[0;32;32m[VPBE] ch0 default output "LCD", mode "800x480"
[m[0;32;32m[VPBE] ch1 default output "COMPOSITE", mode "NTSC"
[m[0;32;32m[VPBE] VPBE Encoder Initialized
[m[0;32;32m[VPBE] options =vid0=off:vid1=off:osd0=800x480x32,1500K:osd1=0x0x8
[m[0;32;32m[VPBE] dm_osd0_fb: 800x480x32@0,0 with framebuffer size 1500KB
[m[0;32;32m[VPBE] dm_osd1_fb: 0x0x8@0,0 with framebuffer size 750KB
[m[0;32;32m[VPBE] Trying to register davinci display video device.
[m[0;32;32m[VPBE] Trying to register davinci display video device.
[m[0;32;32m[VPBE] davinci_init:DaVinci V4L2 Display Driver V1.0 loaded
[m[0;32;32m[VPBE] VPBE Driver Initial OK, Build On : Jun 22 2018, 11:49:23.
[m<7>PWM, Build at Jun 22 2018,11:51:27
21.34s
[0;32;32m[VPFE] VPFE Build on Jun 22 2018 at 11:49:18.
[m[0;32;32m[VPFE] SVN NUM: 7516.
[m[0;32;32m[VPFE] VPFE Driver Initial OK, Build On : Jun 22 2018, 11:49:18.
[m==Enable ADC PSC successfully!==
dm365_ad init:dm365_ad!
[0;32;32m[SND]build Jun 22 2018 11:51:30 SVN 574
[m[0;32;32m[alc3261] alc3261_powerOn
[m[i2c]Found I2C Device (i2c addr 0x1c)
[0;32;32m[alc3261] VTH1510CH alc3261 regs param
[m[0;32;32m[alc3261] init EQ EQMODE:0
[m[0;32;32m[alc3261] EQ disable
[m[base]found the soc chip: alc3261 on i2c bus
[0;32;32m[MCBSP] word0=0, word1=2
[m[0;32;32m[MCBSP] word_num=2
[m[0;32;32m[MCBSP] word_length=16
[m[0;32;32m[MCBSP] word0=0, word1=2
[m[0;32;32m[MCBSP] word_num=2
[m[0;32;32m[MCBSP] word_length=2
[m[0;32;32m[alc3261] alc3261 set rate 16000
[m[0;32;32m[alc3261] VTH1510CH aec param
[m[0;32;32m[alc3261] mono left gain value 95
[m[0;32;32m[alc3261] alc3261_mono_ad_gain_l vol=0x5400
[m[0;32;32m[alc3261] alc3261_spo_l volume=70
[m[0;32;32m[alc3261] alc3261_spo_l vol=0x8700
[m[0;32;32m[alc3261] alc3261_vol_outl volume=100
[m[0;32;32m[alc3261] alc3261_vol_outl vol=0x9f00
[m[0;32;32m[mmc] MMC/SD Driver (mmc_core.ko) SVN NUM: 4029, Build Date: Jun 22 2018,Time: 11:49:49
[m[0;32;32m[mmc] init mmc_blk module-SVN NUM: 3880, Build Date: Jun 22 2018,Time: 11:49:51
[m[0;32;32m[mmc] MMC/SD/SDIO Driver (mmc_drv.ko) SVN NUM: 3880, Build Date: Jun 22 2018,Time: 11:49:51
[m[0;32;32m[mmc] MMC/SD Driver For IPC and IPDome.
[m[0;32;32m[mmc] g_dh_product_type: 0x0, g_dh_product_fchip: 0x0, g_dh_hardware_version: 0x1
[m[0;32;32m[mmc] Support sdcard!!!
[m[0;32;32m[mmc] clk 136000000
[m[0;32;32m[mmc] Do not Support wifi!!!
[m25.66s
Archive: /mnt/pd/product.zip
<3>1:01 not found
creating: proADDRCONF(NETDEV_UP): eth0: link is not ready
duct/
creating: product/VTH1510/
inflating: product/VTH1510/DefaultAccount
inflating: product/VTH1510/CustomConfig
inflating: product/VTH1510/ProductDefinition
[0;32;32m[libdvr]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32mnetinit uses obsolete (PF_INET,SOCK_PACKET)
[libdvr] SVN NUM: 7773.
[monly init eth0
"netinit help" for help
eth0:
MAC: <3c:ef:8c:42:40:d1>
[0;32;31m[libdvr] ERROR (../src/net/net.c|SetGateWay|906): SIOCADDRT
SIOCADDRT: Network is unreachable
[m[0;32;31m[libdvr] ERROR (../src/net/net.c|SetEthAttr|1232): SetGateWay error
IP: <192.168.2.95> netmask: <255.255.255.0>
Gateway: <192.168.2.1>
[m[libdvr] set success
[0;32;32m[libdvr]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[mIPV6: only init eth0
"netinit6 help" for help
eth0:
MAC: <3c:ef:8c:42:40:d1>
IPV6: <2008::6> preFixLen: <112>
[1;33m[libdvr] WARN (../src/net/network6.c|NetWorkDelIP|981): del ip failed:No such device or address
[mIPV6 Gateway: <2008::1>
[0;32;32m[libdvr]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[monly init eth2"netinit help" for help
[1;33m[touchKey] WARN : product VTH1510CH not found, Now Serving For Default product VTH1510
[m[0;32;32m[libdvr]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[m[0;32;32m[VD]vd Build Jun 22 2018 11:52:41 SVN 5010
[edma_ioctl] EDMA_INIT
edma_init:ch:0,tcc:0
[m[0;32;32m[VD]EDMA Channel Num 0
[m[0;32;31m[CFG]Open /dev/sensor fail!
[m[0;35m[CFG]Device -- VTH1510CH, the same to VTH1520B_C
[m[0;32;32m[CFG]Product Name : VTH1510CH
[m[0;32;32m[CFG]Product Id = 0
[m[0;32;32m[CFG]Sensor Id = 0
[m[0;32;32m[CFG]HareWare Id = 1
[m[0;32;32m[CFG]hwInterface Id = 6
[m[0;32;32m[CFG]dspChip Id = 5
[m[0;35m[resizer]Resizer single Mode
[m[1;33m[previewer]WARN : Previewer and resizer not chained!
[m[0;35m[videoServe] VSERVER API: Creating Display Task.
[m[0;35m[videoServe] VSERVER API: Creating decode Task.
[m[0;35m[videoServe] VSERVER API: Creating Resizer Task.
[m[0;35m[server Tsk] VSERVER MAIN: Create displayTsk ...
[m[0;32;32m[display Tsk]w h:800 480 num:4
[m[0;32;32m[drvDisp]mode:10,reqbuf.count=4
[m[0;35m[server Tsk] VSERVER MAIN: Create crtlTask ...
[m[0;35m[server Tsk] VSERVER MAIN: Create d[0;32;31m[touchKey] ERROR (/home/jenkins/jk_slave/workspace/.pcicache/ZW_DH3.1912_VTH_2.X/tmp_build_dir/i2ckey/build/../src/sx86x6.c|sx86x6_init|857): sx86x6_i2c_init.
[m
ecodeTsk ...
[m[0;32;32m[decode] build at: Jun 22 2018:11:52:54 SVN 487
[m[0;32;32m[decode] W:1280 H:720 Q:4 Mode 1 Size: 768000
[m[0;32;32m[decode] start DEC_runDecodeCmdthread tid=375, pid=366
[m[0;32;32m[decode] start DEC_runDecodeVideoThread tid=376, pid=366
[m[0;32;32m[decode] pYUVBufHndl [0x36ff28] ->numBuf 3, size 1645056
[m[0;35m[server Tsk] VSERVER MAIN: Create resizerTsk ...
[m[0;35m[server Tsk] VSERVER MAIN: Start displayTsk ...
[m[0;35m[server Tsk] VSERVER MAIN: Start decodeTsk ...
[m[0;35m[server Tsk] VSERVER MAIN: Create resizerTsk ...
[m[0;35m[server Tsk] VSERVER MAIN: Start crtlTsk ...
insmod: cannot insert '/var/lib/modules/i2ckey.ko': Operation not permitted
input: ft5x0x as /class/input/input0
ft5x0x firmware ID:0x7
ft5x0x vendor ID:0x79
[touch] alloc touch_major=245
touchpanel device init success
[touch] Compile: date : Jun 22 2018, time: 11:51:26
/proc/sys/vm/drop_caches
imod end...
starting pid 388, tty '': '/etc/init.d/appauto'
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[0;32;32m[libdvr]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[mclaststate V1.0 for dm365times=0 @@@; usdate = 0x90101ca6
mode: debug
Sat Jan 8 01:50:38 2000 0.000000 seconds
dh_keyboard = 0
Date&Time: Jul 21 2017 10:32:42
Revision: 30029
Enter 'help' for a list of commands (dsh)
#gethwid
[0;32;32m[libdvr]
libdvr.so Build time: Jun 22 2018 at 11:47:47.
[m[0;32;32m[libdvr] SVN NUM: 7773.
[mthe usage: gethwid type!
PRODUCT_TYPE = 0
VIDEO_CHANNEL = 1
AUDIO_CHANNEL = 2
ALARM_MODE = 3
FVIDEO_CHIP = 4
DSP_CHIP = 5
ANALOG_AUDIO_MODE = 6
TALKBACK = 7
BVIDEO_CHIP = 8
STORE_INTERFACE = 9
MATRIX = 10
WIRELESS_INTERFACE = 11
HD_ENCODE = 12
HD_VERSION = 13
VD_INTERFACE = 14
NET_INTERFACE = 15
INTE_ANALYSE = 16
HD_INFO_LEN = 17
system error
-----------------------------------------------
Date: 22.02.2021 - 14:43:14
End log file
