[Info] FRITZ!Repeater 3000 - 174.07.03 (65228) - Auslieferungsfirmware vom 29.01.2019

[Dann halt nicht mehr]

HWRevision 246

HWSubRevision 1

ProductID Fritz_Box_HW246

CONFIG_INSTALL_TYPE=arm_128MB_cortexa9_2geth_2wlan11ac_25674

Link zum Unboxing-Thread


WLAN

Wie gestern bereits von @eisbaerin auf den Supportdatenseiten gefunden, erreicht der Repeater 3000 nur dann die vollen 1733 Mbit/s, wenn beim Mesh-Master ein 5 GHz-Kanal oberhalb von 100 eingestellt ist. Um im 2.4 GHz-Band auf die vollen 400 Mbit/s zu kommen, muss derzeit die WLAN-Koexistenz-Option deaktiviert werden.

Es wäre schön, wenn in kommenden Firmwareversionen, wie z.B. der 07.08. ein Punkt "Maximale WLAN-Geschwindigkeit" anwählbar ist, der diese Parameter bei FRITZ!Box und FRITZ!Repeater direkt zusammen so einrichtet.

Wichtiger Hinweis, der Zeit spart: im Repeater-Betrieb sollte immer auch das 2.4 GHz-Band ausgewählt sein, da es im 5 GHz-Band schnell dazu kommen kann, dass der Repeater nicht mehr erreichbar ist, weil die Suche nach bevorrechtigten Nutzen das 5 GHz-Band immer mal gern für 10 Minuten deaktiviert.

Ansonsten reagiert das Userinterface zügig und die Box wirkt schon mit der Auslieferungsfirmware recht zuverlässig.

Im Access-Point-Betrieb via LAN vermisse ich die Möglichkeit, den WLAN-Netzen unterschiedliche Keys zuweisen zu können. Beim Repeaterbetrieb ist es aber möglich, getrennte Schlüssel für das 2.4 GHz und das 5 GHz-Netz zu setzen.
https://www.ip-phone-forum.de/threads/fritz-repeater-3000-–-unboxing-und-erste-erfahrungen.302561/

 

[Sirhenryi]

Gibt es die 7.03er AuslieferungsFW eigentlich auf den AVM Servern zum download?
OT entfernt - HabNeFritzbox

 

[TSMusik]

Vollzitat entfernt - HabNeFritzbox
Konnte ich bisher nicht finden, vermutlich weil es die allererste Release-Firmware ist und es noch kein Update gab, das über die Server lief.

 

[rkf]

Hat noch jemand wie ich das Problem, dass der Repeater 3000 alle Nase lang ohne ersichtlichen Grund rebootet? Allein heute schon zum dritten Mal; habe inzwischen bei AVM eine Supportanfrage eingestellt.
BTW, bislang leistete an gleicher Stelle ein 1750E völlig unterbrechungsfrei seinen Dienst.

 

[HarryP_1964]

Meiner läuft seit einer Woche problemlos (LAN-Bridge) ohne Reboots oder WLAN-Probleme.
Allerdings ist die Übertragungsrate, wie hier an anderer Stelle schon ausgeführt, auch nicht besser als beim 1750E.

Harry

 

[TSMusik]

Automatische Reboots habe ich hier noch keine gehabt.

Nur das wland-Log wird mir zugespamt:

wland
-----
REM.: Following output is a ring buffer with '####' as separator.
10:09.56/[317859.046]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
10:10.03/[317866.025]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
10:20.04/[318467.032]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
10:20.10/[318474.004]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
10:30.11/[319074.056]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
10:30.17/[319081.010]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
10:40.18/[319681.096]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
10:40.25/[319688.056]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
10:43.18/[319861.086]:[ERR]job_runner_run:622: Try kickout for job: '27', events: 11
10:43.18/[319861.086]:[ERR]job_runner_run:623: Job description: (TIRPC)

~~~~~
g_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
05:26.48/[300871.053]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
05:36.48/[301472.006]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
05:36.55/[301478.060]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
05:46.56/[302079.026]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
05:47.02/[302085.081]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
05:57.03/[302686.070]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
05:57.10/[302693.028]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
06:07.11/[303294.025]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
06:07.17/[303301.008]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
06:17.19/[303902.089]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
06:17.29/[303912.086]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
06:27.26/[304509.031]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
06:27.32/[304515.081]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
06:37.33/[305116.028]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
06:37.39/[305122.093]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
06:47.40/[305723.092]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
06:47.47/[305730.048]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
06:57.48/[306331.036]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
06:57.54/[306337.092]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
07:07.56/[306939.048]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
07:08.02/[306946.008]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
07:18.03/[307546.068]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
07:18.14/[307557.048]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
07:20.04/[307667.022]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
07:20.09/[307672.094]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
07:28.11/[308154.043]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
07:28.21/[308164.033]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
07:38.16/[308759.057]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
07:38.22/[308766.014]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
07:48.23/[309367.018]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
07:48.30/[309373.084]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
07:58.31/[309974.070]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
07:58.38/[309981.029]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
08:06.32/[310455.054]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
08:08.38/[310581.073]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
08:08.45/[310588.033]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
08:16.31/[311054.064]:[ERR]acs_module_observer_handler_scan_start:436 invalid band 2 / sub_band 208:18.44/[311187.080]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
08:18.52/[311195.035]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
08:28.48/[311791.025]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
08:28.58/[311802.010]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
08:30.11/[311874.080]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
08:30.17/[311880.089]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
08:38.54/[312398.003]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
08:39.01/[312404.060]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
08:49.02/[313005.042]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
08:49.08/[313011.095]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
08:59.08/[313611.098]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
08:59.15/[313618.055]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
09:09.15/[314219.004]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:09.22/[314225.080]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
09:19.22/[314826.001]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:19.30/[314833.031]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
09:29.26/[315429.091]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:29.33/[315436.047]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
09:30.11/[315474.097]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:31.27/[315550.028]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:33.40/[315683.062]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:33.42/[315686.004]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:39.34/[316037.049]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:39.40/[316044.010]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
09:49.41/[316644.043]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:49.47/[316650.092]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)
09:59.48/[317251.079]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -22)
09:59.55/[317258.032]:[ERR]repeating_module.c:(repeating_handle_wland_event):4980: station connection event failed with code -5)

Konnte aber noch keine Probleme mit dem WLAN ausmachen. Vielleicht weil er nicht als Repeater sondern als AP läuft.

 

[Dann halt nicht mehr]

Neue Version 07.04 - 66458 ist erschienen. Und die auch gleich mit recover-image.exe! Hier geht's weiter.

 

[HarryP_1964]

Vor 2 Stunden installiert, bisher alles gut.
Auffällig ist, dass der 3000er oder die Master-Box ca. 30 Minuten gebraucht hat, bis sich die Geräte, die vor dem
Update verbunden waren sich wieder angemeldet haben.

Harry