ZAPHFC komischer sound

schakal2k · 3 Sep 2004

OK, bootlog, ich wusste nur nicht genau, was du meinst...

Code:

Sep  3 18:09:02 asterisk syslog: Starten von syslogd succeeded
Sep  3 18:09:02 asterisk syslog: Starten von klogd succeeded
Sep  3 18:09:03 asterisk irqbalance: Starten von irqbalance succeeded
Sep  3 18:09:03 asterisk portmap: Starten von portmap succeeded
Sep  3 18:09:03 asterisk nfslock: Starten von rpc.statd succeeded
Sep  3 18:08:59 asterisk network: Netzwerkparameter einstellen:  succeeded
Sep  3 18:08:59 asterisk network: Loopback Interface hochfahren:  succeeded
Sep  3 18:09:15 asterisk rpcidmapd: Starten von rpc.idmapd succeeded
Sep  3 18:09:15 asterisk random: Zufallszahlenerzeuger initialisieren:  succeeded
Sep  3 18:09:16 asterisk rc: Starting pcmcia:  succeeded
Sep  3 18:09:16 asterisk netfs: Andere Dateisysteme mounten:  succeeded
Sep  3 18:09:16 asterisk apmd: Starten von apmd succeeded
Sep  3 18:09:16 asterisk autofs: automount startup succeeded
Sep  3 18:09:17 asterisk smartd: Starten von smartd succeeded
Sep  3 18:09:24 asterisk cups: Starten von cupsd succeeded
Sep  3 18:09:24 asterisk sshd:  succeeded
Sep  3 18:09:24 asterisk xinetd: Starten von xinetd succeeded
Sep  3 18:09:25 asterisk sendmail: Starten von sendmail succeeded
Sep  3 18:09:25 asterisk sendmail: Starten von sm-client succeeded
Sep  3 18:09:26 asterisk gpm: Starten von gpm succeeded
Sep  3 18:09:26 asterisk crond: Starten von crond succeeded
Sep  3 18:09:27 asterisk xfs: Starten von xfs succeeded
Sep  3 18:09:27 asterisk anacron: Starten von anacron succeeded
Sep  3 18:09:27 asterisk atd: Starten von atd succeeded
Sep  3 18:09:27 asterisk readahead: background-readahead starten:
Sep  3 18:09:28 asterisk rc: Starting readahead:  succeeded
Sep  3 18:09:29 asterisk messagebus: Starten von messagebus succeeded
Sep  3 18:09:29 asterisk mdmonitor: mdadm succeeded
Sep  3 18:09:29 asterisk mdmpd: mdmpd failed

Raffi · 3 Sep 2004

Neee, daß ist schon zu spät ;-) Ich meine die Meldungen, die direkt beim Botten kommen. Sowas hier

Code:

Aug 30 06:57:23 home kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
Aug 30 06:57:23 home kernel: Inspecting /boot/System.map-2.6.8
Aug 30 06:57:23 home kernel: Loaded 24283 symbols from /boot/System.map-2.6.8.
Aug 30 06:57:23 home kernel: Symbols match kernel version 2.6.8.
Aug 30 06:57:23 home kernel: No module symbols loaded - kernel modules not enabled.
Aug 30 06:57:23 home kernel: Linux version 2.6.8 (root@home) (gcc version 3.3.4 (Debian 1:3.3.4-6sarge1)) #1 SMP Sat Aug 14 18:25:10 CEST 2004
Aug 30 06:57:23 home kernel: BIOS-provided physical RAM map:
Aug 30 06:57:23 home kernel:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Aug 30 06:57:23 home kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 30 06:57:23 home kernel:  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
Aug 30 06:57:23 home kernel:  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
Aug 30 06:57:23 home kernel:  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
Aug 30 06:57:23 home kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Aug 30 06:57:23 home kernel: 127MB HIGHMEM available.
Aug 30 06:57:23 home kernel: 896MB LOWMEM available.
Aug 30 06:57:23 home kernel: found SMP MP-table at 000f5260
Aug 30 06:57:23 home kernel: On node 0 totalpages: 262128
Aug 30 06:57:23 home kernel:   DMA zone: 4096 pages, LIFO batch:1
Aug 30 06:57:23 home kernel:   Normal zone: 225280 pages, LIFO batch:16
Aug 30 06:57:23 home kernel:   HighMem zone: 32752 pages, LIFO batch:7
Aug 30 06:57:23 home kernel: DMI 2.3 present.
Aug 30 06:57:23 home kernel: ACPI: RSDP (v000 GBT                                       ) @ 0x000f6fa0
Aug 30 06:57:23 home kernel: ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
Aug 30 06:57:23 home kernel: ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
Aug 30 06:57:23 home kernel: ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7080
Aug 30 06:57:23 home kernel: ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Aug 30 06:57:23 home kernel: ACPI: Local APIC address 0xfee00000
Aug 30 06:57:23 home kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 30 06:57:23 home kernel: Processor #0 15:2 APIC version 20
Aug 30 06:57:23 home kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 30 06:57:23 home kernel: Processor #1 15:2 APIC version 20
Aug 30 06:57:23 home kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Aug 30 06:57:23 home kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Aug 30 06:57:23 home kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 30 06:57:23 home kernel: IOAPIC[0]: Assigned apic_id 2
Aug 30 06:57:23 home kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Aug 30 06:57:23 home kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 30 06:57:23 home kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 30 06:57:23 home kernel: ACPI: IRQ0 used by override.
Aug 30 06:57:23 home kernel: ACPI: IRQ2 used by override.
Aug 30 06:57:23 home kernel: ACPI: IRQ9 used by override.
Aug 30 06:57:23 home kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs

... und so weiter

Raffi

schakal2k · 3 Sep 2004

OK, hier die messages:

Code:

Sep  3 18:09:02 asterisk syslogd 1.4.1: restart.
Sep  3 18:09:02 asterisk syslog: Starten von syslogd succeeded
Sep  3 18:09:02 asterisk kernel: klogd 1.4.1, log source = /proc/kmsg started.
Sep  3 18:09:02 asterisk kernel: Linux version 2.6.6-1.435.2.3 ([email protected]) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Thu Jul 1 09:11:28 EDT 2004
Sep  3 18:09:02 asterisk kernel: BIOS-provided physical RAM map:
Sep  3 18:09:02 asterisk kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep  3 18:09:02 asterisk kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep  3 18:09:02 asterisk kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Sep  3 18:09:02 asterisk kernel:  BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
Sep  3 18:09:02 asterisk kernel:  BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
Sep  3 18:09:02 asterisk kernel:  BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
Sep  3 18:09:02 asterisk kernel:  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Sep  3 18:09:02 asterisk kernel: 0MB HIGHMEM available.
Sep  3 18:09:02 asterisk kernel: 255MB LOWMEM available.
Sep  3 18:09:02 asterisk syslog: Starten von klogd succeeded
Sep  3 18:09:02 asterisk kernel: zapping low mappings.
Sep  3 18:09:02 asterisk kernel: On node 0 totalpages: 65532
Sep  3 18:09:02 asterisk kernel:   DMA zone: 4096 pages, LIFO batch:1
Sep  3 18:09:02 asterisk kernel:   Normal zone: 61436 pages, LIFO batch:14
Sep  3 18:09:02 asterisk kernel:   HighMem zone: 0 pages, LIFO batch:1
Sep  3 18:09:02 asterisk kernel: DMI 2.3 present.
Sep  3 18:09:02 asterisk kernel: ACPI disabled because your bios is from 2000 and too old
Sep  3 18:09:02 asterisk kernel: You can enable it with acpi=force
Sep  3 18:09:02 asterisk kernel: Built 1 zonelists
Sep  3 18:09:02 asterisk kernel: Kernel command line: ro root=LABEL=/ rhgb quiet
Sep  3 18:09:02 asterisk kernel: Initializing CPU#0
Sep  3 18:09:02 asterisk kernel: CPU 0 irqstacks, hard=c034c000 soft=c034b000
Sep  3 18:09:02 asterisk kernel: PID hash table entries: 1024 (order 10: 8192 bytes)
Sep  3 18:09:02 asterisk kernel: Detected 451.077 MHz processor.
Sep  3 18:09:02 asterisk kernel: Using tsc for high-res timesource
Sep  3 18:09:02 asterisk kernel: Console: colour VGA+ 80x25
Sep  3 18:09:02 asterisk kernel: Memory: 256472k/262128k available (1572k kernel code, 4944k reserved, 606k data, 144k init, 0k highmem)
Sep  3 18:09:02 asterisk kernel: Calibrating delay loop... 890.88 BogoMIPS
Sep  3 18:09:03 asterisk kernel: Security Scaffold v1.0.0 initialized
Sep  3 18:09:03 asterisk irqbalance: Starten von irqbalance succeeded
Sep  3 18:09:03 asterisk kernel: SELinux:  Initializing.
Sep  3 18:09:03 asterisk kernel: SELinux:  Starting in permissive mode
Sep  3 18:09:03 asterisk kernel: There is already a security framework initialized, register_security failed.
Sep  3 18:09:03 asterisk kernel: selinux_register_security:  Registering secondary module capability
Sep  3 18:09:03 asterisk kernel: Capability LSM initialized as secondary
Sep  3 18:09:03 asterisk kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep  3 18:09:03 asterisk kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Sep  3 18:09:03 asterisk kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Sep  3 18:09:03 asterisk kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Sep  3 18:09:03 asterisk kernel: CPU: L2 cache: 512K
Sep  3 18:09:03 asterisk kernel: Intel machine check architecture supported.
Sep  3 18:09:03 asterisk kernel: Intel machine check reporting enabled on CPU#0.
Sep  3 18:09:03 asterisk kernel: CPU: Intel Pentium III (Katmai) stepping 03
Sep  3 18:09:03 asterisk kernel: Enabling fast FPU save and restore... done.
Sep  3 18:09:03 asterisk kernel: Enabling unmasked SIMD FPU exception support... done.
Sep  3 18:09:03 asterisk kernel: Checking 'hlt' instruction... OK.
Sep  3 18:09:03 asterisk kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Sep  3 18:09:03 asterisk kernel: Freeing initrd memory: 187k freed
Sep  3 18:09:03 asterisk kernel: NET: Registered protocol family 16
Sep  3 18:09:03 asterisk kernel: PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=1
Sep  3 18:09:03 asterisk kernel: PCI: Using configuration type 1
Sep  3 18:09:03 asterisk portmap: Starten von portmap succeeded
Sep  3 18:09:03 asterisk kernel: mtrr: v2.0 (20020519)
Sep  3 18:09:03 asterisk kernel: ACPI: Subsystem revision 20040326
Sep  3 18:09:03 asterisk kernel: ACPI: Interpreter disabled.
Sep  3 18:09:03 asterisk kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Sep  3 18:09:03 asterisk kernel: usbcore: registered new driver usbfs
Sep  3 18:09:03 asterisk kernel: usbcore: registered new driver hub
Sep  3 18:09:03 asterisk kernel: PCI: Probing PCI hardware
Sep  3 18:09:03 asterisk kernel: PCI: Probing PCI hardware (bus 00)
Sep  3 18:09:03 asterisk kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:04.0
Sep  3 18:09:03 asterisk kernel: PCI: IRQ 0 for device 0000:00:04.2 doesn't match PIRQ mask - try pci=usepirqmask
Sep  3 18:09:03 asterisk kernel: PCI: Found IRQ 9 for device 0000:00:04.2
Sep  3 18:09:03 asterisk kernel: PCI: Sharing IRQ 9 with 0000:00:09.0
Sep  3 18:09:03 asterisk kernel: vesafb: probe of vesafb0 failed with error -6
Sep  3 18:09:03 asterisk kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Sep  3 18:09:03 asterisk kernel: audit: initializing netlink socket (disabled)
Sep  3 18:09:03 asterisk kernel: audit(1094234886.168:0): initialized
Sep  3 18:09:03 asterisk kernel: Total HugeTLB memory allocated, 0
Sep  3 18:09:03 asterisk kernel: VFS: Disk quotas dquot_6.5.1
Sep  3 18:09:03 asterisk kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep  3 18:09:03 asterisk kernel: SELinux:  Registering netfilter hooks
Sep  3 18:09:03 asterisk rpc.statd[1630]: Version 1.0.6 Starting
Sep  3 18:09:03 asterisk kernel: Initializing Cryptographic API
Sep  3 18:09:03 asterisk kernel: Limiting direct PCI/PCI transfers.
Sep  3 18:09:03 asterisk nfslock: Starten von rpc.statd succeeded
Sep  3 18:09:03 asterisk kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  3 18:09:03 asterisk kernel: isapnp: Scanning for PnP cards...
Sep  3 18:09:03 asterisk kernel: isapnp: No Plug & Play device found
Sep  3 18:09:03 asterisk kernel: Real Time Clock Driver v1.12
Sep  3 18:09:03 asterisk kernel: Linux agpgart interface v0.100 (c) Dave Jones
Sep  3 18:09:03 asterisk kernel: agpgart: Detected an Intel 440BX Chipset.
Sep  3 18:09:03 asterisk kernel: agpgart: Maximum main memory to use for agp memory: 203M
Sep  3 18:09:03 asterisk kernel: agpgart: AGP aperture is 64M @ 0xe4000000
Sep  3 18:09:03 asterisk kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
Sep  3 18:09:03 asterisk kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep  3 18:09:03 asterisk kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sep  3 18:09:03 asterisk kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Sep  3 18:09:03 asterisk kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Sep  3 18:09:03 asterisk kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep  3 18:09:03 asterisk kernel: PIIX4: IDE controller at PCI slot 0000:00:04.1
Sep  3 18:09:04 asterisk kernel: PIIX4: chipset revision 1
Sep  3 18:09:04 asterisk kernel: PIIX4: not 100%% native mode: will probe irqs later
Sep  3 18:09:04 asterisk kernel:     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
Sep  3 18:09:04 asterisk kernel:     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
Sep  3 18:09:04 asterisk kernel: hda: WDC AC418000D, ATA DISK drive
Sep  3 18:09:04 asterisk kernel: Using cfq io scheduler
Sep  3 18:09:04 asterisk kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep  3 18:09:04 asterisk kernel: hdc: LTN526, ATAPI CD/DVD-ROM drive
Sep  3 18:09:04 asterisk kernel: ide1 at 0x170-0x177,0x376 on irq 15
Sep  3 18:09:04 asterisk kernel: hda: max request size: 128KiB
Sep  3 18:09:04 asterisk kernel: hda: 35239680 sectors (18042 MB) w/1966KiB Cache, CHS=34960/16/63, UDMA(33)
Sep  3 18:09:04 asterisk kernel:  hda: hda1 hda2 hda3
Sep  3 18:09:04 asterisk kernel: hdc: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
Sep  3 18:09:04 asterisk kernel: Uniform CD-ROM driver Revision: 3.20
Sep  3 18:09:04 asterisk kernel: ide-floppy driver 0.99.newide
Sep  3 18:09:04 asterisk kernel: usbcore: registered new driver hiddev
Sep  3 18:09:04 asterisk kernel: usbcore: registered new driver usbhid
Sep  3 18:09:04 asterisk kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Sep  3 18:09:04 asterisk kernel: mice: PS/2 mouse device common for all mice
Sep  3 18:09:04 asterisk kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Sep  3 18:09:04 asterisk kernel: input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Sep  3 18:09:04 asterisk kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  3 18:09:04 asterisk kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Sep  3 18:09:04 asterisk kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Sep  3 18:08:59 asterisk network: Netzwerkparameter einstellen:  succeeded 
Sep  3 18:09:04 asterisk kernel: NET: Registered protocol family 2
Sep  3 18:08:59 asterisk network: Loopback Interface hochfahren:  succeeded 
Sep  3 18:09:04 asterisk kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Sep  3 18:09:04 asterisk kernel: TCP: Hash tables configured (established 16384 bind 32768)
Sep  3 18:09:04 asterisk kernel: Initializing IPsec netlink socket
Sep  3 18:09:04 asterisk kernel: NET: Registered protocol family 1
Sep  3 18:09:05 asterisk kernel: NET: Registered protocol family 17
Sep  3 18:09:05 asterisk kernel: md: Autodetecting RAID arrays.
Sep  3 18:09:05 asterisk kernel: md: autorun ...
Sep  3 18:09:05 asterisk kernel: md: ... autorun DONE.
Sep  3 18:09:05 asterisk kernel: RAMDISK: Compressed image found at block 0
Sep  3 18:09:05 asterisk kernel: VFS: Mounted root (ext2 filesystem).
Sep  3 18:09:05 asterisk kernel: kjournald starting.  Commit interval 5 seconds
Sep  3 18:09:06 asterisk kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep  3 18:09:06 asterisk kernel: Freeing unused kernel memory: 144k freed
Sep  3 18:09:06 asterisk kernel: SELinux:  Disabled at runtime.
Sep  3 18:09:06 asterisk kernel: SELinux:  Unregistering netfilter hooks
Sep  3 18:09:06 asterisk kernel: NET: Registered protocol family 10
Sep  3 18:09:06 asterisk kernel: Disabled Privacy Extensions on device c02e4ac0(lo)
Sep  3 18:09:06 asterisk kernel: IPv6 over IPv4 tunneling driver
Sep  3 18:09:06 asterisk kernel: USB Universal Host Controller Interface driver v2.2
Sep  3 18:09:06 asterisk kernel: PCI: Found IRQ 9 for device 0000:00:04.2
Sep  3 18:09:06 asterisk kernel: PCI: Sharing IRQ 9 with 0000:00:09.0
Sep  3 18:09:06 asterisk kernel: uhci_hcd 0000:00:04.2: UHCI Host Controller
Sep  3 18:09:06 asterisk kernel: uhci_hcd 0000:00:04.2: irq 9, io base 0000d400
Sep  3 18:09:06 asterisk kernel: uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
Sep  3 18:09:06 asterisk kernel: hub 1-0:1.0: USB hub found
Sep  3 18:09:07 asterisk kernel: hub 1-0:1.0: 2 ports detected
Sep  3 18:09:07 asterisk kernel: EXT3 FS on hda2, internal journal
Sep  3 18:09:07 asterisk kernel: device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [email][email protected][/email]
Sep  3 18:09:07 asterisk kernel: cdrom: open failed.
Sep  3 18:09:07 asterisk kernel: Adding 522104k swap on /dev/hda3.  Priority:-1 extents:1
Sep  3 18:09:07 asterisk kernel: kjournald starting.  Commit interval 5 seconds
Sep  3 18:09:07 asterisk kernel: EXT3 FS on hda1, internal journal
Sep  3 18:09:07 asterisk kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep  3 18:09:07 asterisk kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
Sep  3 18:09:07 asterisk kernel: parport0: irq 7 detected
Sep  3 18:09:07 asterisk kernel: SCSI subsystem initialized
Sep  3 18:09:07 asterisk kernel: inserting floppy driver for 2.6.6-1.435.2.3
Sep  3 18:09:07 asterisk kernel: Floppy drive(s): fd0 is 1.44M
Sep  3 18:09:07 asterisk kernel: FDC 0 is a post-1991 82077
Sep  3 18:09:07 asterisk kernel: CSLIP: code copyright 1989 Regents of the University of California
Sep  3 18:09:07 asterisk kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Sep  3 18:09:07 asterisk kernel: HiSax: Linux Driver for passive ISDN cards
Sep  3 18:09:07 asterisk kernel: HiSax: Version 3.5 (module)
Sep  3 18:09:08 asterisk kernel: HiSax: Layer1 Revision 2.46.2.5
Sep  3 18:09:08 asterisk kernel: HiSax: Layer2 Revision 2.30.2.4
Sep  3 18:09:08 asterisk kernel: HiSax: TeiMgr Revision 2.20.2.3
Sep  3 18:09:08 asterisk kernel: HiSax: Layer3 Revision 2.22.2.3
Sep  3 18:09:08 asterisk kernel: HiSax: LinkLayer Revision 2.59.2.4
Sep  3 18:09:08 asterisk kernel: PCI: Found IRQ 9 for device 0000:00:09.0
Sep  3 18:09:08 asterisk kernel: PCI: Sharing IRQ 9 with 0000:00:04.2
Sep  3 18:09:08 asterisk kernel: 3c59x: Donald Becker and others. [url]www.scyld.com/network/vortex.html[/url]
Sep  3 18:09:08 asterisk kernel: 0000:00:09.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.19
Sep  3 18:09:08 asterisk kernel: HiSax module removed
Sep  3 18:09:08 asterisk kernel: ISDN-subsystem unloaded
Sep  3 18:09:08 asterisk kernel: CAPI Subsystem Rev 1.1.2.8
Sep  3 18:09:08 asterisk kernel: capifs: Rev 1.1.2.3
Sep  3 18:09:08 asterisk kernel: capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
Sep  3 18:09:08 asterisk kernel: fcpci: module license 'Proprietary' taints kernel.
Sep  3 18:09:08 asterisk kernel: fcpci: AVM FRITZ!Card PCI driver, revision 0.6.2
Sep  3 18:09:08 asterisk kernel: fcpci: (fcpci built on Aug 30 2004 at 02:07:34)
Sep  3 18:09:08 asterisk kernel: PCI: Found IRQ 5 for device 0000:00:0a.0
Sep  3 18:09:08 asterisk kernel: fcpci: AVM FRITZ!Card PCI found: port 0xb800, irq 5
Sep  3 18:09:09 asterisk kernel: fcpci: Loading...
Sep  3 18:09:09 asterisk kernel: fcpci: Driver 'fcpci' attached to stack. (152)
Sep  3 18:09:09 asterisk kernel: fcpci: Stack version 3.11-02
Sep  3 18:09:09 asterisk kernel: kcapi: Controller 1: fcpci-b800-05 attached
Sep  3 18:09:09 asterisk kernel: kcapi: card 1 "fcpci-b800-05" ready.
Sep  3 18:09:09 asterisk kernel: fcpci: Loaded.
Sep  3 18:09:09 asterisk kernel: Zapata Telephony Interface Registered on major 196
Sep  3 18:09:09 asterisk kernel: ip_tables: (C) 2000-2002 Netfilter core team
Sep  3 18:09:09 asterisk kernel: PCI: Found IRQ 9 for device 0000:00:09.0
Sep  3 18:09:09 asterisk kernel: PCI: Sharing IRQ 9 with 0000:00:04.2
Sep  3 18:09:09 asterisk kernel: 3c59x: Donald Becker and others. [url]www.scyld.com/network/vortex.html[/url]
Sep  3 18:09:09 asterisk kernel: 0000:00:09.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.19
Sep  3 18:09:09 asterisk kernel: ip_tables: (C) 2000-2002 Netfilter core team
Sep  3 18:09:15 asterisk rpcidmapd: Starten von rpc.idmapd succeeded
Sep  3 18:09:15 asterisk random: Zufallszahlenerzeuger initialisieren:  succeeded
Sep  3 18:09:16 asterisk rc: Starting pcmcia:  succeeded
Sep  3 18:09:16 asterisk netfs: Andere Dateisysteme mounten:  succeeded
Sep  3 18:09:16 asterisk apmd[1720]: Version 3.0.2 (APM BIOS 1.2, Linux driver 1.16ac)
Sep  3 18:09:16 asterisk apmd: Starten von apmd succeeded
Sep  3 18:09:16 asterisk autofs: automount startup succeeded
Sep  3 18:09:16 asterisk smartd[1758]: smartd version 5.21 Copyright (C) 2002-3 Bruce Allen 
Sep  3 18:09:16 asterisk smartd[1758]: Home page is http://smartmontools.sourceforge.net/  
Sep  3 18:09:16 asterisk smartd[1758]: Opened configuration file /etc/smartd.conf 
Sep  3 18:09:16 asterisk smartd[1758]: Configuration file /etc/smartd.conf parsed. 
Sep  3 18:09:16 asterisk smartd[1758]: Device: /dev/hda, opened 
Sep  3 18:09:16 asterisk smartd[1758]: Device: /dev/hda, not found in smartd database. 
Sep  3 18:09:17 asterisk smartd[1758]: Device: /dev/hda, is SMART capable. Adding to "monitor" list. 
Sep  3 18:09:17 asterisk smartd[1758]: Monitoring 1 ATA and 0 SCSI devices 
Sep  3 18:09:17 asterisk apmd[1720]: Charge: * * * (-1% unknown)
Sep  3 18:09:17 asterisk smartd[1760]: smartd has fork()ed into background mode. New PID=1760. 
Sep  3 18:09:17 asterisk smartd: Starten von smartd succeeded
Sep  3 18:09:24 asterisk kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
Sep  3 18:09:24 asterisk kernel: parport0: irq 7 detected
Sep  3 18:09:24 asterisk kernel: lp0: using parport0 (polling).
Sep  3 18:09:24 asterisk kernel: lp0: console ready
Sep  3 18:09:24 asterisk cups: Starten von cupsd succeeded
Sep  3 18:09:24 asterisk sshd:  succeeded
Sep  3 18:09:24 asterisk xinetd: Starten von xinetd succeeded
Sep  3 18:09:25 asterisk sendmail: Starten von sendmail succeeded
Sep  3 18:09:25 asterisk sendmail: Starten von sm-client succeeded
Sep  3 18:09:26 asterisk gpm[2020]: *** info [startup.c(95)]: 
Sep  3 18:09:26 asterisk gpm[2020]: Started gpm successfully. Entered daemon mode.
Sep  3 18:09:26 asterisk xinetd[1981]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Sep  3 18:09:26 asterisk xinetd[1981]: Started working: 1 available service
Sep  3 18:09:26 asterisk gpm[2020]: *** info [mice.c(1766)]: 
Sep  3 18:09:26 asterisk gpm[2020]: imps2: Auto-detected intellimouse PS/2
Sep  3 18:09:26 asterisk gpm: Starten von gpm succeeded
Sep  3 18:09:26 asterisk crond: Starten von crond succeeded
Sep  3 18:09:27 asterisk xfs: Starten von xfs succeeded
Sep  3 18:09:27 asterisk anacron: Starten von anacron succeeded
Sep  3 18:09:27 asterisk atd: Starten von atd succeeded
Sep  3 18:09:27 asterisk readahead: background-readahead starten: 
Sep  3 18:09:28 asterisk rc: Starting readahead:  succeeded
Sep  3 18:09:29 asterisk messagebus: Starten von messagebus succeeded
Sep  3 18:09:29 asterisk mdmonitor: mdadm succeeded
Sep  3 18:09:29 asterisk mdmpd: mdmpd failed
Sep  3 18:09:31 asterisk init: open(/dev/pts/0): No such file or directory
Sep  3 18:09:50 asterisk sshd(pam_unix)[2395]: session opened for user root by (uid=0)
Sep  3 20:31:47 asterisk vsftpd: vsftpd vsftpd succeeded

Was mich auch ein wenig wundert ist die sache mit dem Hisax, aber das wird ja wieder removed. Und er findet auch keine Befehle in dieser Richtung...

Raffi · 3 Sep 2004

Probier bitte nochmal linux mit "noapic pci=noacpi,usepirqmask" zu starten.

Raffi

schakal2k · 3 Sep 2004

Raffi schrieb:
Probier bitte nochmal linux mit "noapic pci=noacpi,usepirqmask" zu starten.

Raffi

Wo gebe ich dass denn ein? Ich kenne diese Befehle nur von Knoppix...

Entschuldige bitte, aber alles was ich bisher mit Linux gemacht habe, hat nicht solche Probleme verursacht...

EDIT:

Wobei laut messages APIC nicht verwendet wird, da der Rechner zu alt ist.

Raffi · 3 Sep 2004

Wenn der Rechner Bootet hast du als erster einen prompt oder Auswahlfenster, wo Du auswählen kannst, was der Rechner booten soll. entweder steht da einfach boot: oder falls ein Menü da ist eine Option zu Parameter Übergabe. Am prompt dann einfach "linux noapic pci=noacpi,usepirqmask" eingeben und enter drücken.

Raffi

schakal2k · 3 Sep 2004

Raffi schrieb:
Wenn der Rechner Bootet hast du als erster einen prompt oder Auswahlfenster, wo Du auswählen kannst, was der Rechner booten soll. entweder steht da einfach boot: oder falls ein Menü da ist eine Option zu Parameter Übergabe. Am prompt dann einfach "linux noapic pci=noacpi,usepirqmask" eingeben und enter drücken.

Raffi

Nein, leider keine Änderung, Problem besteht noch immer...

bjunix · 4 Sep 2004

vieleicht ist der kernel 2.6 verantwortlich. ich glaube zaphfc ist nicht 100% mit 2.6 kompatibel. aber ob es daran liegen kann, weis ich nicht.
welche hardware benutzt du? mobo, cpu, etc..

wenn du ahnung vom kernel kompilieren hast, würde ich es mal probieren einen minimal 2.4 kernel zu bauen ohne usb unterstützung.

schakal2k · 4 Sep 2004

Mainboard: Asus P3B-F
CPU: P3 450MHz
RAM: 256 MB SD-RAM
GK: Matrox Millennium AGP
NIC: 3Com 905B-TX
ISDN1: AVM Fritz mit CAPI-Treibern
ISDN2: Typhoon (irgendwas) mit HFC-Chip

bjunix schrieb:
...

wenn du ahnung vom kernel kompilieren hast, würde ich es mal probieren einen minimal 2.4 kernel zu bauen ohne usb unterstützung.

Hab ich leider keine Ahnung von.

Allerdings wundert mich etwas:

1. Die Hisax-Treiber werden am Anfang geladen aber dann wieder removed. Kann man das nicht irgendwie komplett raus nehmen? Scheinbar sind es ja nur Module...

2. Könnte es vielleicht ein Problem mit der Priorität oder dem Timing sein?

3. Wofür ist zaprtc?

schakal2k · 4 Sep 2004

Die Option "alaw=1-2" in der zaptel.conf hat auch nichts geändert.

Ich hab auch zum Test mal die Maus abgezogen, aber das ändert auch nichts

Ich weiss wirklich nicht mehr weiter...

schakal2k · 5 Sep 2004

Raffi schrieb:
Probier bitte nochmal linux mit "noapic pci=noacpi,usepirqmask" zu starten.

Raffi

Bingo

"[highlight=red:17cb9664a3]acpi=force[/highlight:17cb9664a3]"

Damit funktioniert es!!!

Kraven · 21 Sep 2004

ich habs aufgegeben...

Also ich vermute die kombination AVM B1 und zaphfc funktioniert nicht!
Ich für meinen Teil habe es jetzt erstmal aufgegeben bis ich eine zweite hfc karte habe.
Evtl könnte mir jemand sagen wie ich hylafax mit einer hfc karte ans laufen bekomme, dann kann ich demnächst die B1 rausschmeissen.

fluckhardt · 10 Okt 2004

hast du jetzt komplett "noapic pci=noacpi,usepirqmask acpi=force" oder nur den acpi-force uebergeben? also ist das ein force zum ein- oder ausschalten?

habe auch diesen furchtbaren sound mit zwei hfc-s karten.. geht _garnicht_.. ansonsten funzt das hier alles..

Languages

Suche

Languages

Suche

ZAPHFC komischer sound

schakal2k

Mitglied

Raffi

Neuer User

schakal2k

Mitglied

Raffi

Neuer User

schakal2k

Mitglied

Raffi

Neuer User

schakal2k

Mitglied

bjunix

Neuer User

schakal2k

Mitglied

schakal2k

Mitglied

schakal2k

Mitglied

Kraven

Neuer User

fluckhardt

Neuer User

Zurzeit aktive Besucher

Neueste Beiträge

Statistik des Forums