VTO2000A unbricking Hilfe Gesucht

Sidebar Sidebar
Upgrade 3CX to v18 and get it hosted free!
setenv dh_keyboard 1
user not valid!
 
Machst du das auch im Bootloader? Scheint mir nicht so...
 
Seriel mit Putty.
Sobald sie netz hat versuche ich sie mit dem kommando: setenv dh_keyboard 1 zu beenden.
Jetz hab ich beim Start * eingeben .
jetz bin ich im Bootloader.
Danke
 
Nur die Kamera funktioniert noch nicht.
mac Adresse geändert, Seriennummer geändert was kann noch vermurkst sein?
Unbenannt3.JPG

-- Aktualisiert --

Am Browser liegt es nicht, hab eine zweite VTO2000 zum Testen.

-- Aktualisiert --

Code: 
DHBOOT# printenv
bootcmd=fsload
bootdelay=3
baudrate=115200
eth1addr=00:01:5b:00:55:66
eth2addr=00:01:5b:00:77:88
ipaddr=192.168.1.108
serverip=192.168.1.1
netmask=255.255.255.0
bootfile="uImage"
appauto=1
single=0
da=protect off all;tftp 81a00000 dm365_ubl_boot_16M.bin.img;flwrite
dc=tftp 81a00000 custom-x.cramfs.img; flwrite
dr=tftp 81a00000 romfs-x.cramfs.img; flwrite
du=tftp 81a00000 user-x.cramfs.img; flwrite
dd=tftp 81a00000 data-x.cramfs.img; flwrite
dw=tftp 81a00000 web-x.cramfs.img; flwrite
dg=tftp 81a00000 gui-x.cramfs.img; flwrite
dk=tftp 81a00000 kernel-x.cramfs.img; flwrite
up=tftp 81a00000 update.img; flwrite
tk=tftp 80800000 uImage; bootm 80800000
gionum=22.25
gioval=1.1
dh_com=0
autosip=192.168.254.254
autolip=192.168.1.108
autogw=192.168.1.1
autonm=255.255.255.0
HWID=VTO2000A:0:4:1:3:5:0:1:9:3:3:0:1B0:0:0:0:0:0:0:0
bootargs= console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=cramfs ,nolock mem=90M newmem=90M  video=davincifb:vid0=OFF:vid1=OFF:eek:sd0=OFF:eek:sd1=OFF
filesize=B040
fileaddr=82000000
dh_keyboard=0********
eth0addr=4c:11:bf:7d:76:19
ID=4K06565PAZ2DAB8
ethaddr=9c:14:63:2a:45:1b
stdin=serial
stdout=serial
stderr=serial
ver=U-Boot 1.3.6 (jerry) (May 23 2018 - 10:46:47)

Environment size: 1195/16380 bytes
DHBOOT#
 
Zuletzt bearbeitet von einem Moderator:
Naja, Gerät schaut ja soweit gut aus. Was funktioniert nun konkret nicht? Ist schwer zu helfen, wenn du nur "video funktioniert nicht" schreibst.
 
Unbenannt4.JPG
Hier noch ein teil des log`s, vileicht ist ja da schon etwas zu erkennen.

Code: 
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2019.04.14 18:40:25 =~=~=~=~=~=~=~=~=~=~=~=

Checking DDR......OK

UBL Version: 1.46t(DM365)16:10:30 Aug  4 2017
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (May 23 2018 - 10:46:47)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
Retry count exceeded; starting again
==>use default images
APP_OFFSET_NEW test
.......
## Booting kernel from Legacy Image at 80007fc0 ...
   Image Name:   Linux-2.6.18_pro500-davinci_evm-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1798432 Bytes =  1.7 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux........................................................................................................................ done, booting the kernel.
Linux version 2.6.18_pro500-davinci_evm-arm_v5t_le (jenkins@centos234) (gcc version 4.2.0 (MontaVista 4.2.0-16.0.32.0801914 2008-08-30)) #1 PREEMPT Thu Sep 13 08:35:29 CST 2018
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: DaVinci DM365 EVM
new hwid:VTO2000A:0:4:1:3:5:0:1:9:3:3:0:1B0:0:0:0:0:0:0:0
use newmem, newmemStartAddr:0x80000000 newmemSize:0x5900000(89M)
Memory policy: ECC disabled, Data cache writeback
DaVinci DM0365 variant 0x8
prediv = 6, pll0_mult = 85, postiv = 1, pll_div4 = 4, pll_rate = 680000000, pll_div6 = 25
PLL0: fixedrate: 24000000, commonrate: 170000000, vpssrate: 340000000 PLL1_ARMRATE = 340000000
PLL0: vencrate_sd: 27200000, ddrrate: 340000000 mmcsdrate: 136000000
##: prediv = 1, pll1_mult = 9,  postdisv = 1, pll-rate = 432000000, pll_div2 = 1, pll_div4 = 21, pll-div5 = 16
PLL1: armrate: 432000000, voicerate: 20571428, vencrate_hd: 27000000, ddrratePLL2 = 432000000
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists.  Total pages: 22784
dh_keyboard:0
PID hash table entries: 512 (order: 9, 2048 bytes)
Clock event device timer0_0 configured with caps set: 07
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 89MB = 89MB total
Memory: 86272KB available (2992K code, 721K data, 172K init)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
MUX: initialized SPI0_SDENA0
DaVinci: 104 gpio irqs
MUX: initialized GPIO20
MUX: initialized I2C_SCL
pMem_relimitBaseAddr:0xc6000000
Generic PHY: Registered new driver
configured buff delay: 50

SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
product has no spi2 device.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
LTT : ltt-facilities init
LTT : ltt-facility-core init in kernel
davinci_wdt_init proc enable
rtc probe addr 0x68, probeByte 0x00...
RTC_i2c_attach_client:addr:0x68
 == Found RTC chip DS1338, I2C addr 0x68 ==
rtc probe addr 0x6f, probeByte 0x00...
rtc probe addr 0x57, probeByte 0x00...
rtc probe addr 0x32, probeByte 0x00...
DS1338  driver v1.04sem  proc enable,
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
&&&: uart_add_one_port, line = 0, uartclk = 0
&&&: uart_add_one_port, line = 1, uartclk = 170000000
ttyS0: autoconf (0x0000, 0xfbc20000): <6>serial8250.0: ttyS0 at MMIO map 0x1c20000 mem 0xfbc20000 (irq = 40) is a 16550A
&&&: uart_add_one_port, line = 0, uartclk = 24000000
ttyS1: autoconf (0x0000, 0xfbd06000): <6>serial8250.0: ttyS1 at MMIO map 0x1d06000 mem 0xfbd06000 (irq = 41) is a 16550A
&&&: uart_add_one_port, line = 1, uartclk = 170000000
Broadcom BCM5411: Registered new driver
Broadcom BCM5421: Registered new driver
Broadcom BCM5461: Registered new driver
Broadcom BCM5481: Registered new driver
Broadcom BCM54811: Registered new driver
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Linux video capture interface: v2.00
i2c /dev entries driver
System bootup mode:SPI
JECDEC ID : 0xc22018
ext_jedec ID : 0xc220
chip id mx25l12805d
found mx25l12805d in table.
m25p80 spi0.0: mx25l12805d (16384 Kbytes)
Creating 10 MTD partitions on "spi0.0":
0x00000000-0x00040000 : "bootloader"
0x00040000-0x00060000 : "HWID"
0x00060000-0x00260000 : "kernel"
0x00260000-0x003e0000 : "web"
0x003e0000-0x006e0000 : "rootfs"
0x006e0000-0x006f0000 : "product"
0x006f0000-0x00da0000 : "user"
0x00da0000-0x00ec0000 : "data"
0x00ec0000-0x00f60000 : "backup"
0x00f60000-0x01000000 : "config"
dm_spi.0: davinci SPI Controller driver at 0xc6266000 (irq = 42) use_dma=0
[*****geyj******1]register master =0xc06de800;bus_num = 0
dm_spi.1: davinci SPI Controller driver at 0xc6268800 (irq = 17) use_dma=0
[*****geyj******1]register master =0xc06de400;bus_num = 1
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver asix
usbcore: registered new driver cdc_ether
usbcore: registered new driver net1080
usbcore: registered new driver zaurus
musb_hdrc: version 6.0, pio, host, debug=0
musb_hdrc: USB Host mode controller at c626a000 using PIO, IRQ 12
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found

IP-Config: No network devices available.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing init memory: 172K

init started: BusyBox v1.9.1 (2017-06-12 16:54:28 CST)

starting pid 198, tty '': '/etc/init.d/dnode'
2.66s

starting pid 203, tty '': '/etc/init.d/rcS'
cp: cannot stat '/sbin/telnetd': No such file or directory
Sun Apr 14 16:40:35 2019  0.000000 seconds
[0;32;32m[gpio] initialize success, build at 07:38:26, Mar 13 2018[m[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[0;32;32m[gpio] CMD=9, Setting product type: 0
[m[mGIO_SET_PRODU[0;32;32m[gpio] CMD=4, Setting product fchip: 3
[mCT_TYPE = 9
[0;32;32m[gpio] CMD=3, Setting hardware version: 0
[m[0;32;32m[gpio] SD card hardware reset is done, gio55=0.
[m[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
4.69s
current wdt period=5000 ms
[m[syshelper] Vcurrent wdt period=25000 ms
1.21(no exit): startup time=25 s, appauto=1, hctosystime=1500,type=0
[syshelper] start watch dog success, period is 25000 ms.
coremnt not found

7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18

DH:: [rootlistinit:909] rootlistinit  buf len=53 

Extracting cmemk.ko
Extracting davinci_emac.ko
Extracting display.ko
Extracting dm365mmap.ko
Extracting edmak.ko
Extracting evdev.ko
Extracting getjif.ko
Extracting h3ak.ko
Extracting i2ckey.ko
Extracting irqk.ko
Extracting mcu_spi.ko
Extracting mfrc522.ko
Extracting mmc_blk.ko
Extracting mmc_core.ko
Extracting mmc_drv.ko
Extracting mymemcpy.ko
Extracting pwm.ko
Extracting pwm_gpio.ko
Extracting Sensor.ko
Extracting sound.ko
Extracting spi.ko
Extracting spi_mcu.ko
Extracting touch_panel_ctrl.ko
Extracting vpbek.ko
Extracting vpfek.ko

Everything is Ok
/mnt/mtd/Config/ppp

7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18

Extracting sshd

Everything is Ok

7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18

Extracting VideoDaemon

Everything is Ok

7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18

Extracting sonia

Everything is Ok
/mnt/mtd/Config/ppp
Davinci EMAC MII Bus: probed
MAC address is 9c:14:63:2a:45:1b
TI DaVinci EMAC Linux version updated 4.0
[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[m[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[m[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[m[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[m[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[m[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[monly init eth0
"netinit help" for help
eth0:
MAC: <9c:14:63:2a:45:1b>
1:01 not found
[0;32;31m[libdvADDRCONF(NETDEV_UP): eth0: link is not ready
r] ERROR  (../src/net/net.c|SetGateWay|1141): SIOCADDRT
SIOCADDRT: Network is unreachable
[m[0;32;31m[libdvr] ERROR  (../src/net/net.c|SetEthAttr|1467): SetGateWay error
IP: <192.168.1.48>        netmask: <255.255.0.0>
netinit uses obsolete (PF_INET,SOCK_PACKET)
Gateway: <192.168.1.1>
[m[libdvr] set success

[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[mIPV6: only init eth0
"netinit6 help" for help
eth0:
MAC: <9c:14:63:2a:45:1b>
IPV6: <0:0:0::0>        preFixLen: <112>
[1;33m[libdvr] WARN  (../src/net/network6.c|NetWorkDelIP|982): del ip failed:No such device or address
[mIPV6 Gateway: <2008::1>
[0;32;31m[libdvr] ERROR  (../src/net/network6.c|NetWorkSetGateway6|1228): SIOCADDRT:No route to host
[m
[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[monly init eth2"netinit help" for help
bootargs:console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=cramfs ,nolock mem=90M newmem=90M video=davincifb:vid0=OFF:vid1=OFF:osd0=OFF:osd1=OFF
bootargs_prefix: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=cramfs ,nolock
bootargs_suffix: video=davincifb:vid0=OFF:vid1=OFF:osd0=OFF:osd1=OFF
mem_old:90M
mem_new:90M
cmem= 90
CMEMK module: built on Apr 14 2010 at 13:45:45
  Reference Linux version 2.6.18
  File /workspace/dm365/dvsdk_2_10_01_18_guangpan/linuxutils_2_24_03/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
allocated heap buffer 0xc7000000 of size 0x2600000
CMEM Range Overlaps Kernel Physical - allowing overlap
CMEM phys_start (0x1000) overlaps kernel (0x80000000 -> 0x85900000)
cmemk initialized
IRQK module: built on Apr 14 2010 at 13:46:34
  Reference Linux version 2.6.18
  File /workspace/dm365/dvsdk_2_10_01_18_guangpan/linuxutils_2_24_03/packages/ti/sdo/linuxutils/irq/src/module/irqk.c
irqk initialized
EDMAK module: built on Apr 14 2010 at 13:46:46
  Reference Linux version 2.6.18
  File /workspace/dm365/dvsdk_2_10_01_18_guangpan/linuxutils_2_24_03/packages/ti/sdo/linuxutils/edma/src/module/edmak.c
getjif init @ 091230
##: HZ = 10
register getjif driver successful !


[0;32;32m[VPBE] VPBE Build on Mar 13 2018 at 07:38:44.
[m[0;32;32m[VPBE] SVN NUM: 8606.

[m[0;32;32m[VPBE] ch0 default output "LCD", mode "800x480"
[m[0;32;32m[VPBE] ch1 default output "COMPOSITE", mode "NTSC"
[m[0;32;32m[VPBE] VPBE Encoder Initialized
[m[0;32;32m[VPBE] options =:vid0=OFF:vid1=OFF:osd0=OFF:osd1=OFF
[m[0;32;32m[VPBE] dm_osd0_fb: 0x0x16@0,0 with framebuffer size 750KB
[m[0;32;32m[VPBE] dm_vid0_fb: 0x0x16@0,0 with framebuffer size 1125KB
[m[0;32;32m[VPBE] dm_osd1_fb: 0x0x4@0,0 with framebuffer size 750KB
[m[0;32;32m[VPBE] dm_vid1_fb: 0x0x16@0,0 with framebuffer size 1125KB
[m[0;32;32m[VPBE] Trying to register davinci display video device.
[m[0;32;32m[VPBE] Trying to register davinci display video device.
[m[0;32;32m[VPBE] davinci_init:DaVinci V4L2 Display Driver V1.0 loaded
[m[0;32;32m[VPBE] VPBE Driver Initial OK, Build On : Mar 13 2018, 07:38:44.
[m

[0;32;32m[VPFE] VPFE Build on Mar 13 2018 at 07:38:32.
[m[0;32;32m[VPFE] SVN NUM: 8556.
[m[0;32;32m[VPFE] VPFE Driver Initial OK, Build On : Mar 13 2018, 07:38:32.
[m

[0;32;32m[H3A] H3A Driver Build on Mar 13 2018 at 07:38:38.
[m[0;32;32m[H3A] SVN NUM: 8033.

[m[0;32;32m[H3A] VideoBuf Driver Initial OK !
[m[0;32;32m[H3A] DEV_h3aHwInit
[m[0;32;32m[H3A] VideoBuf Create queuefor dm365_aew OK !
[m[0;32;32m[H3A] AEW Driver Initial OK !
[m[0;32;32m[H3A] VideoBuf Create queuefor dm365_af OK !
[m[0;32;32m[H3A] AF Driver Initial OK !
[m[0;32;32m[H3A] H3A Driver Initial OK
[m<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[0;32;32m[SND]build Mar 13 2018 07:41:04 SVN 642
[m[0;32;32m[alc3261] alc3261_powerOn
[m[i2c]Found I2C Device (i2c addr 0x1c)
[0;32;32m[alc3261] VTO2000A alc3261 regs param
[m[0;32;32m[alc3261] init EQ EQMODE:0
[m[0;32;32m[alc3261] EQ disable
[m[base]found the soc chip: alc3261 on i2c bus
[0;32;32m[MCBSP] word0=0, word1=2
[m[0;32;32m[MCBSP] word_num=2
[m[0;32;32m[MCBSP] word_length=16
[m[0;32;32m[MCBSP] word0=0, word1=2
[m[0;32;32m[MCBSP] word_num=2
[m[0;32;32m[MCBSP] word_length=2
[m[0;32;32m[alc3261] alc3261 set rate 16000
[m[0;32;32m[alc3261] VTO2000A aec param
[m[0;32;32m[alc3261] mono left gain value 95
[m[0;32;32m[alc3261] alc3261_mono_ad_gain_l vol=0x5400
[m[0;32;32m[alc3261] alc3261_spo_l volume=70
[m[0;32;32m[alc3261] VTO2000A set vol most
[m[0;32;32m[alc3261] alc3261_spo_l vol=0x9700
[m[0;32;32m[alc3261] alc3261_vol_outl volume=100
[m[0;32;32m[alc3261] alc3261_vol_outl vol=0x9f00
[mBusyBox v1.9.1 (2017-06-12 16:54:28 CST) multi-call binary

Usage: mknod [OPTIONS] NAME TYPE MAJOR MINOR

Create a special f[0;32;32m[spi_smlt] Serving For product VTO2000A by spi hardware.

[mile (block, character, or pipe)

Options:
    -m    Create the special file using the specified mode (default a=rw)

TYPEs include:
    b:    Make a block (buffered) device
    c or u:[0;32;32m[spi_smlt] initialize success, build at 07:38:22, Mar 13 2018
[m    Make a characte[0;32;32m[spi_smlt] delay 10us

[mr (un-buffered) device
    p:    Make a named pipe. MAJOR and MINOR are ignored for named pipes

Archive:  /mnt/pd/product.zip
   creating: product/
   creating: product/IPC-HF3100/
  inflating: product/IPC-HF3100/CustomConfig
  inflatin[0;32;32m[sensor]
[mg: product/IPC-H[0;32;32m[sensor] Sensor.ko Build on Apr 10 2018 at 17:22:55.
[mF3100/shorthand.[0;32;32m[sensor] SVN NUM: 8563.
[mtxt
  inflating[0;32;32m[sensor] The Sensor Driver Version:Ver 2.0
[m: product/IPC-HF3100/DefaultAccount
  inflating: product/IPC-HF3100/ProductDefinition
[0;32;32m[sensor] Error, When read the reg 12288,line :1298
[m[0;32;31m[sensor] ERROR  (/home/20800/DM36x/P_2012.04.24_Sensor_ZW/build/../src/chips/mt9m034/mt9m034.c|mt9m034_check|37): Try to get modle id error!!!
You'd Better check Your IIC bus!!
[m[0;32;31m[sensor] ERROR  (/home/20800/DM36x/P_2012.04.24_Sensor_ZW/build/../src/chips/mt9m034/mt9m034.c|mt9m034_init|2161): MT9M034 error!
[m[0;32;31m[sensor] ERROR  (/home/20800/DM36x/P_2012.04.24_Sensor_ZW/build/../src/base/base.c|sensor_chip_create|368): When init the chip mt9m034, error happened!
Maybe Cannot create bus, or create then clock
If the chip need the clock, have U registered
it for the sensor???
[m[0;32;31m[sensor] ERROR  (/home/20800/DM36x/P_2012.04.24_Sensor_ZW/build/../src/comm/sensor.c|sensor_init|778): sensor device init failed
[minsmod: cannot insert '/var/lib/modules/Sensor.ko': Bad address
Archive:  /mnt/pd/2Acfg.zip
   creating: 2Acfg/
   creating: 2Acfg/AR0130/
  inflating: 2Acfg/AR0130/aew_para.txt
  inflating: 2Acfg/AR0130/aew_para.bin
   creating: 2Acfg/OV9712/
  inflating: 2Acfg/OV9712/aew_para.txt
  inflating: 2Acfg/OV9712/aew_para.bin
   creating: 2Acfg/MT9M034/
  inflating: 2Acfg/MT9M034/aew_para.txt
  inflating: 2Acfg/MT9M034/aew_para.bin
cat: can't open '/pr<6>DH:: [elffile_crypto_verify:848] start elf_file:/var/usr/VideoDaemon

oc/sensor': No sDH:: [debug_print_signsec:642] =====SIGNATURE BEGIN=====
uch file or direDH:: [debug_print_signsec:647] 6dda4db8 0420066b 1360560c 2e434483
ctory
sh: ar013DH:: [debug_print_signsec:647] 88085957 76fcaf8b bc7f0393 272e2907
0: unknown operaDH:: [debug_print_signsec:647] b0fece19 812333dc 157f75e7 cb474019
nd
sh: mt9m034:DH:: [debug_print_signsec:647] 75611706 0b61edb7 1a1bbd9f 52090410
 unknown operand
sensor_name:
DH:: [debug_print_signsec:647] 6c26fa8e a7c82d10 e46b9305 accff79d
DH:: [debug_print_signsec:647] 485d4d9e ab2d37dd 0d9981fc c4931a6f
DH:: [debug_print_signsec:647] c458fbb8 db3138cc 9d663729 ac6da9d0
DH:: [debug_print_signsec:647] 02e5055c 310fb02f ffbee715 9a60f02b
DH:: [debug_print_signsec:647] cf2e735d c220ea27 575cedc6 6cd646b7
DH:: [debug_print_signsec:647] 3d636f45 739c7aaa 7c7482c2 ecee97bd
DH:: [debug_print_signsec:647] b7c4238a d4865087 ce168891 b9b7c7ea
DH:: [debug_print_signsec:647] 9ec2a914 e4802969 898165db 699babbb
DH:: [debug_print_signsec:647] ed37335a 40fc42fc 3f53e138 d8eb8068
DH:: [debug_print_signsec:647] a4503b06 1c8ca976 ae5c2da8 862551bc
DH:: [debug_print_signsec:647] f51cd5a9 b2fd12e7 90cc9983 ef84f2fe
DH:: [debug_print_signsec:647] 2be5fb63 6572ef8d 67efa213 1aa47802
DH:: [debug_print_signsec:650] =====SIGNATURE END=====
DH:: [elffile_crypto_verify:864] verify elfbin ok.
[edma_ioctl] EDMA_INIT
[0;32;32m[libdvedma_init:ch:0,tcc:0
r]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[m[0;32;32m[VD]vd Build Aug 23 2018 12:12:37 SVN 5384
[VD]VPSS: disable GCK~RSZ Wait for H3A CLOCK DISALBE
[m[0;32;32m[VD]DRV_syncRstTimeOut start...
[m[0;32;32m[VD]DRV_syncRstTimeOut end...
[m[0;32;32m[VD]DRV_syncRstTimeOut start...
[m[0;32;32m[VD]DRV_syncRstTimeOut end...
[m[0;32;32m[VD]DRV_syncRstTimeOut start...
[m[0;32;32m[VD]DRV_syncRstTimeOut end...
[m[0;32;32m[VD]EDMA Channel Num 0
[m[0;35m[CFG]found VTO2000A id 42
[m[0;32;31m[CFG]Open /dev/sensor fail!
[m[0;35m[CFG]Device -- VTO2000A, the same to VTT201
[m[0;32;32m[CFG]Product Name : VTO2000A
[m[0;32;32m[CFG]Product Id = 42
[m[0;32;32m[CFG]Sensor Id = 3
[m[0;32;32m[CFG]HareWare Id = 0
[m[0;32;32m[CFG]hwInterface Id = 0
[m[0;32;32m[CFG]dspChip Id = 5
[m[0;32;32m[VD]VTT201 720p INIT
[m[0;32;31m[VD]ERROR  (cfg_AR0130_VTO1210A_X.c|CFG_sensorOpen|489): Open device /dev/sensor fail!
[m[0;32;31m[VD]ERROR  (cfg_AR0130_VTO1210A_X.c|CFG_sensorTypeGet_VTO1210A_X|542): Wrong SensorType For VTO1210A_X!
[m[0;35m[VD]sensorType: 1073893376
[m[0;35m[VD]productID:  42
[m[0;32;31m[VD]ERROR  (cfg_Server_VTO1210A_X.c|CFG_prvInit_VTT201|240):
[m[0;32;31m[CFG]ERROR  (cfg_public.c|CFG_pubConfigInit|620):  pPrivInit()
[m[0;32;31m[VD]ERROR  (videoServerCfg.c|VIDEO_serverCfgInit|94): CFG_pubConfigInit()
[m[0;32;31m[videoServe]ERROR  (videoServe.c|VIDEO_serverInit|155): VIDEO_serverCfgInit()
[m[0;32;31m[VD]ERROR  (videoServerMain.c|main|45): VIDEO_serverInit()
[m[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[monly init eth2"netinit help" for help
/proc/sys/vm/drop_caches
imod end...

starting pid 385, tty '': '/etc/init.d/appauto'
[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[mclaststate V1.0 for dm365times=0 @@@; usdate = 0xdcdd0a43
mode: normal
DH:: [elffile_crypto_verify:848] start elf_file:/var/usr/sonia

Sun Apr 14 16:41DH:: [debug_print_signsec:642] =====SIGNATURE BEGIN=====
:04 2019  0.0000DH:: [debug_print_signsec:647] ee73580d 934371e8 a7fb04b2 b1d2b2da
00 seconds
DH:: [debug_print_signsec:647] 2a341437 b6ee4b8c 79ddac1c 59ce9a4f
DH:: [debug_print_signsec:647] c6376d57 9c3a298e 0fa25a68 88a6f9ea
DH:: [debug_print_signsec:647] 3a553d15 785dcd26 57b2996f a81f6fce
DH:: [debug_print_signsec:647] f744f332 558b5aab 38771bd3 c12ed2f3
DH:: [debug_print_signsec:647] 4f78ccff 0cd39637 ed329d87 1b8866ff
DH:: [debug_print_signsec:647] e52e9a2a b905c3c8 6eec86c1 d54716fa
DH:: [debug_print_signsec:647] cf10a378 01d216fe f115cf71 6c87e60f
DH:: [debug_print_signsec:647] 3094a5e5 33c56404 8aed5a34 11d4cf3f
DH:: [debug_print_signsec:647] d3a0ec95 114f83ba a4ea3e64 3533ddd2
DH:: [debug_print_signsec:647] 3d94e38a c29aa59d 2b76edc6 af375d1a
DH:: [debug_print_signsec:647] 3666cd66 8e8ae425 7bf83927 8a84c122
DH:: [debug_print_signsec:647] 61577626 a1976256 7f664250 23705231
DH:: [debug_print_signsec:647] 4d5ad1ce 41b7fffd 890f7580 3366f242
DH:: [debug_print_signsec:647] 7c5e2c1f 2efe254e bffe0ac2 7b1f1dd0
DH:: [debug_print_signsec:647] 3aaac81f 7af3d2dd ee7a036a d65a2e02
DH:: [debug_print_signsec:650] =====SIGNATURE END=====
DH:: [elffile_crypto_verify:864] verify elfbin ok.
[0;32;32m[libdvr]
libdvr.so Build time: Aug  9 2018 at 11:44:31.
[m[0;32;32m[libdvr] SVN NUM: 8433.
[m|16:41:08|[StreamApp@][InitStreamAppComponentLibrary.cpp:43]|INFO [StreamAppComponent] register all Component
|16:41:08|[StreamApp@][StreamApp.cpp:18]|INFO [StreamAppComponent] initStreamAppServerComponent
|16:41:08|[StreamApp@][DHEncrypt.cpp:11]|INFO [StreamAppComponent] initStreamAppPrivateFrameEncryptComponent
|16:41:08|[StreamApp@][RtspRealStream.cpp:36]|INFO [StreamAppComponent] initStreamAppRtspStreamSourceComponent
real stream factory, Src/Rtsp/Client/RtspRealStream.h:190, iid=StreamSource
|16:41:08|[StreamApp@][QuickMulticast.cpp:18]|INFO [StreamAppComponent] initStreamAppQuickMulticastComponent
|16:41:08|[StreamApp@][TalkbackClient.cpp:15]|INFO [StreamAppComponent] initStreamAppHttpTalkClientComponent
|16:41:08|[StreamApp@][TsMulticastService.cpp:10]|INFO [StreamAppComponent] initStreamAppTsMulticastServiceComponent
|16:41:08|[StreamApp@][UdpMulticastService.cpp:7]|INFO [StreamAppComponent] initStreamAppUdpMulticastServiceComponent
|16:41:08|[StreamApp@][TalkbackSvr.cpp:22]|INFO [StreamAppComponent] initStreamAppHttpTalkbackSvrComponent
|16:41:08|[StreamSvr@676298][TransformatBase.cpp:9]|INFO [StreamAppComponent] initStreamSvrParseCreaterComponent
|16:41:08|[StreamApp@][MikeyAdapter.cpp:21]|INFO [StreamAppComponent] initStreamAppDHEncryptClientComponent
|16:41:08|[StreamApp@][RealTalkStream.cpp:11]|INFO [StreamAppComponent] initStreamAppZWANGComponent
CheckHwid :VTO2000A:0:4:1:3:5:0:1:9:3:3:0:1B0:0:0:0:0:0:0:0
[0;32;32m[libdvr] At the start of getSystemInfo
[m[libdvr] @@@@ buf = 4K06565PAZ2DAB8
the cipherManagerPtr->config run>>>>>>>>>>>>>>>
the config strkeyFixPart0 is GeneralVDP
the config strkeyFixPart1 is VTO4K06565PAZ2DAB8
[1;34;40m16:41:08|SecurityUnit|the input num is 2|Src/CipherManager/CipherManager.cpp:45|config()[0m
[33;40m16:41:08|[Manager] [ver:Unknown] warn CommonConfigManager.cpp config 249 tid:393 CCommonConfigManager::CCommonConfigManager() read custom config file failed.
[0m[31;40m16:41:08|[Unknown] [ver:Unknown] error Main.cpp restoreNetCfg 448 tid:393 fopen /mnt/mtd/Config/network2 failed!
[0m[0;32;32m[libdvr] At the start of getSystemInfo
[m[libdvr] @@@@ buf = 4K06565PAZ2DAB8
[33;40m16:41:08|[Manager] [ver:] warn  tid:393 init:88 use default cmos def path!
[0m[0;32;32m[libdvr] getStartUpFlag: 1
[m[32;40m16:41:08|[Manager] [ver:] info  tid:393 CMagicBox::CMagicBox() getStartUpFlag 1
[0m[32;40m16:41:08|[Manager] [ver:] info  tid:393 CMagicBox::onConfigAutoMaintain day = [2], hour = [2], min = [0], enable = [true]
[0m[32;40m16:41:08|[Manager] [ver:] info  tid:393 CMagicBox::startDstTune readCMOS DstTune flag is 0.
[0m[36;40m16:41:08|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:398 ThreadBody Enter name = WatchDog, id = 398, prior = N1, stack = 0x42254e14
[0m[33;40m16:41:08|[Manager] [ver:] warn  tid:393 CMagicBox::CMagicBox() load product definition Resolution file failed.
[0m[33;40m16:41:08|[Manager] [ver:] warn  tid:393 CMagicBox::CMagicBox() load product definition language file failed.
[0m[32;40m16:41:08|[Manager] [ver:] info  tid:393 CMagicBox::m_systemInfo.noPtz == [0]
[0m[32;40m16:41:08|[Manager] [ver:] info  tid:393 CMagicBox::m_systemInfo.noSdCard == [0]
[0m[32;40m16:41:08|[Manager] [ver:] info  tid:393 CMagicBox::m_systemInfo.bandWidth == [0]
[0m[32;40m16:41:08|[Manager] [ver:] info  tid:393 Src/MagicBox.cpp:config:2185 set PD Device to VTO2000A
[0m[31;40m16:41:08|[Manager] [ver:Unknown] error LanguageShorthand.cpp readShorthandMap 50 tid:393 CLanguageShorthand file is not exist!
[0m[32;40m16:41:08|[SecurityApp-436670] [ver:] info  tid:393 tid:393, getQuestionInFile enter the path /mnt/data/question.txt [Src/PasswdFind/PasswdFind.cpp:806]
[0m[32;40m16:41:08|[SecurityApp-436670] [ver:] info  tid:393 tid:393, the ret is 0 [Src/PasswdFind/PasswdFind.cpp:823]
[0m[31;40m16:41:08|[VDPFunc] [ver:22550] error VDPOemManager.cpp config 56 tid:393 CVDPOemManager::config load file failed. /var/tmp/pd/OemDefinition:
[0m[32;40m16:41:08|[Manager] [ver:Unknown] info Locales.cpp SetLanguage 338 tid:393 SetLanguage(English) load file:/mnt/data/Strings/English.txt
[0m[37;40m16:41:08|[Manager] [ver:Unknown] trace Locales.cpp SetLanguage 364 tid:393 CLocales::SetLanguage()===============>>>/mnt/data/Strings/English.txt
[0m[31;40m16:41:08|[Manager] [ver:Unknown] error UserManager.cpp initialize 357 tid:393 currDevSerial:4K06565PAZ2DAB8
[0m[31;40m16:41:08|[Manager] [ver:Unknown] error UserManager.cpp initialize 369 tid:393 DevInformation'SerialID:4K06565PAZ2DAB8
[0m[33;40m16:41:09|[libInfra] [ver:609478M] warn Thread.cpp createThread 408 tid:393 [Src/Infra3/Thread.cpp:408] this:0x146bd48 tid:393, too small stack size, StackSize=1024, adjust to 16k
[0m[37;40m16:41:09|[Manager] [ver:Unknown] trace Log.cpp attachFilter 164 tid:393 CLog::attachFilter
[0m[33;40m16:41:09|[Manager] [ver:] warn  tid:393 System do not support sysLog.
[0m[33;40m16:41:09|[Manager] [ver:] warn  tid:393 CMagicBox::getDeviceSubClass DeviceSubClass empty !
[0m[36;40m16:41:09|[Manager] [ver:Unknown] debug TelnetHelper.cpp onConfigTelnet 77 tid:393 CTelnetConfigHelper::onConfigTelnet(), m_cfgtelnet: null

[0m[36;40m16:41:09|[Manager] [ver:Unknown] debug TelnetHelper.cpp onConfigTelnet 83 tid:393 ConfigTelnet={
   "Enable" : false
}

[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:399 ThreadBody Enter name = Console, id = 399, prior = N1, stack = 0x42454e14
[0m[0;32;32m[libdvr] disable telnetd
[m[36;40m16:41:09|[Manager] [ver:Unknown] debug TelnetHelper.cpp onConfigTelnet 110 tid:393 setTelnet interface ok!!!!!!!!,110,Src/Helper/TelnetHelper.cpp
[0m[36;40m16:41:09|[Manager] [ver:Unknown] debug SSHDHelper.cpp onConfigSSh 102 tid:393 CSShConfigHelper::onConfigSSh(), m_cfgSSh: null

[0m[36;40m16:41:09|[Manager] [ver:Unknown] debug SSHDHelper.cpp onConfigSSh 108 tid:393 ConfigSSh={
   "Enable" : false
}

killall: sshd: no process killed
[0m[36;40m16:41:09|[Manager] [ver:Unknown] debug SSHDHelper.cpp onConfigSSh 135 tid:393 setSSH interface ok!!!!!!!!,135,Src/Helper/SSHDHelper.cpp
[0m[32;40m16:41:09|[Manager] [ver:Unknown] info Client.cpp CLocalClient 42 tid:393 CLocalClient::CLocalClient(0x0x1578410)>>>>>>
[0m[32;40m16:41:09|[Manager] [ver:Unknown] info Client.cpp execLogin 836 tid:393 si.loginType=0, si.clientAddress=127.0.0.1, si.clientType=GUI si.authorityInfo= si.authorityType= si.passwordType=Plain
[0m[37;40m16:41:09|[Manager] [ver:Unknown] trace IPAddressCheck.cpp IsIPContainedIn 499 tid:393 IsIPContainedIn  [127.0.0.1-127.0.0.1], [127.0.0.1]
[0m[37;40m16:41:09|[Manager] [ver:Unknown] trace Md5UserManager.cpp checkPassword 259 tid:393 CUserManager::checkPassword() user 'default' isn't exist
[0m[31;40m16:41:09|[Manager] [ver:Unknown] error Client.cpp execLogin 933 tid:393 CLocalClient::login() failed with:268632085!
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug ComponentFactory.cpp getComponentFactory 115 tid:393 [Src/Component/ComponentFactory.cpp:115] tid:393, iid=UserManager could not been generated because log failed.
[0m[31;40m16:41:09|[Unknown] [ver:Unknown] error Main.cpp main 1191 tid:393 Error:Component error: User or password not valid!
[0m[32;40m16:41:09|[] [ver:] info   tid:393 CRasterFont::CRasterFont load file '/mnt/data/Fonts/Font.bin' successfully!
[0m[32;40m16:41:09|[] [ver:] info   tid:393 CRasterFont::CRasterFont load file '/mnt/data/Fonts/Font24.bin' successfully!
[0m[32;40m16:41:09|[] [ver:] info   tid:393 ==========================
[0m[32;40m16:41:09|[] [ver:] info   tid:393 mem = 0x0x42456000 0x(nil) 0x(nil)
[0m[32;40m16:41:09|[] [ver:] info   tid:393 pitch = 0
[0m[32;40m16:41:09|[] [ver:] info   tid:393 width = 0
[0m[32;40m16:41:09|[] [ver:] info   tid:393 height = 0
[0m[32;40m16:41:09|[] [ver:] info   tid:393 foramt = 1
[0m[32;40m16:41:09|[] [ver:] info   tid:393 ==========================
[0m[32;40m16:41:09|[] [ver:] info   tid:393 ==========================
[0m[32;40m16:41:09|[] [ver:] info   tid:393 mem = 0x0x42512000 0x(nil) 0x(nil)
[0m[32;40m16:41:09|[] [ver:] info   tid:393 pitch = 0
[0m[32;40m16:41:09|[] [ver:] info   tid:393 width = 0
[0m[32;40m16:41:09|[] [ver:] info   tid:393 height = 0
[0m[32;40m16:41:09|[] [ver:] info   tid:393 foramt = 1
[0m[32;40m16:41:09|[] [ver:] info   tid:393 ==========================
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 GUI Mouse not config
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/bmp_frame.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_select.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_focus.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_select.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_focus.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/button/button_normal.png failed!
[0m[33;40m16:41:09|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 676 tid:393 load std::string '&comstring.sunday' failed!
[0m[33;40m16:41:09|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 676 tid:393 load std::string '&comstring.monday' failed!
[0m[33;40m16:41:09|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 676 tid:393 load std::string '&comstring.tuesday' failed!
[0m[33;40m16:41:09|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 676 tid:393 load std::string '&comstring.wednesday' failed!
[0m[33;40m16:41:09|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 676 tid:393 load std::string '&comstring.thursday' failed!
[0m[33;40m16:41:09|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 676 tid:393 load std::string '&comstring.friday' failed!
[0m[33;40m16:41:09|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 676 tid:393 load std::string '&comstring.saturday' failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 CheckBox not config
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 ComboBox not config
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 GroupBox not config
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 InputTray not config
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 CharList not config
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/tree_select_bg.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/menu_arrow_right.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 NumberBox not config
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/bmp_frame.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/main_frame.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/main_frame_title.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/pagebase/button_close_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/pagebase/button_help_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/loadingbar_bg.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/loadingbar.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/radio_checked_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/radio_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 ScrollBar not config
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/sliderctrl/tracker_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/sliderctrl/slider_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/sliderctrl/slider_select.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/sliderctrl/slider_focus.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/nas_checked_select.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/nas_checked_select.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/nas_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/nas_normal.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 TimeSection not config
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/expand1.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/expand2.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/shrink1.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/shrink2.png failed!
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 Cursor not config
[0m[37;40m16:41:09|[] [ver:] trace  tid:393 Page Open Background
[32;40m16:41:09|[Manager] [ver:] info  tid:397 ========================================================================
[0m[32;40m16:41:09|[Manager] [ver:] info  tid:397 CMagicBox::onSecondTimer current date and time are : 14-04-2019 16:41:10
[0m[32;40m16:41:09|[Manager] [ver:] info  tid:397 ========================================================================
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:402 ThreadBody Enter name = ConfigSaveTimer, id = 402, prior = N64, stack = 0x429cce14
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:403 ThreadBody Enter name = ClientCheck, id = 403, prior = N64, stack = 0x42bcce14
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:404 ThreadBody Enter name = CaretTimer, id = 404, prior = N64, stack = 0x42dcce14
[0m[0m[36;40m16:41:09|[] [ver:] debug  tid:393 tracepoint: Src/Page.cpp, 489.
[0m[33;40m16:41:09|[] [ver:] warn   tid:393 InputTray not create
[0m##############Setup SSL mutex Success!#####################
[32;40m16:41:09|[NetFramework] [ver:Unknown] info NetThread.cpp CreateThreadPool 197 tid:393 [*] NetFramework 1.0.0.435814 Built in Mar 13 2018 07:55:10[*]
[0m[32;40m16:41:09|[NetFramework] [ver:Unknown] info NetThread.cpp CreateThreadPool 198 tid:393 [*] NetFramework with open_sslVerison= 1.0.2i Built in Mar 13 2018 07:55:10[*]
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:401 ThreadBody Enter name = GUI, id = 401, prior = N64, stack = 0x427cce14
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:405 ThreadBody Enter name = NetFramework, id = 405, prior = N64, stack = 0x42fcce14
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:406 ThreadBody Enter name = NetFramework, id = 406, prior = N64, stack = 0x431cce14
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:407 ThreadBody Enter name = NetFramework, id = 407, prior = N64, stack = 0x433cce14
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:408 ThreadBody Enter name = NetFramework, id = 408, prior = N64, stack = 0x435cce14
[0m[36;40m16:41:09|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:409 ThreadBody Enter name = NetFramework, id = 409, prior = N64, stack = 0x437cce14
[0m[36;40m16:41:10|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:410 ThreadBody Enter name = NetFramework, id = 410, prior = N64, stack = 0x439cce14
[0m[36;40m16:41:10|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:411 ThreadBody Enter name = NetFramework, id = 411, prior = N64, stack = 0x43bcce14
[0m[36;40m16:41:10|[libInfra] [ver:609478M] debug Thread.cpp InternalThreadBody 115 tid:412 ThreadBody Enter name = NetFramework, id = 412, prior = N64, stack = 0x43dcce14
[0m[0;32;32m[libdvr] At the start of getSystemInfo
[m[libdvr] @@@@ buf = 4K06565PAZ2DAB8
[0;32;32m[libdvr] At the start of getSystemInfo
[m[libdvr] @@@@ buf = 4K06565PAZ2DAB8


[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc] lidec build at: Aug 23 2018:12:12:58
[m[0;32;32m[libenc] Version:9437
[m[0;32;32m[libenc]build options:snatch SUP_MJEG
[m[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc]enter initialize_share_mem 1 times,init_flag=0
[m[0;32;31m[libenc]ERROR  (/home/44151/DM365/libenc/P_DM368_Single2ML_ZW_2012.02.06/build/../src/libenc/libenc.c|attach_shm_encode2app|1321):  create shmID error
[m[0;32;31m[libenc]ERROR  (/home/44151/DM365/libenc/P_DM368_Single2ML_ZW_2012.02.06/build/../src/libenc/libenc.c|initialize_share_mem|1435): attach_shm_encode2app err
[m[0;32;31m[libenc]ERROR  (/home/44151/DM365/libenc/P_DM368_Single2ML_ZW_2012.02.06/build/../src/libenc/libenc.c|createVideoEncoder|1566): initialize_share_mem failed
[m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :0
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :0
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :0
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :4
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :4
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :4
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :3
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :3
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :3
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :36
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :36
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :36
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :6
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :4
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :4
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :0
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :0
[0m[37;40m16:41:10|[libMedia] [ver:Unknown] trace Display.cpp getImageSizePixels 128 tid:393 Stream::ImageSizeType type :0
[0m[0;32;32m[libfvideo] built at Mar 13 2018 07:41:42, SVN 45206 ==
[m[libfvideo] ##: ===============>: stand = 0
[1;33m[libfvideo] WARN  (../../src/videoin.c|attach_shm_cmdarea|54):  create shmID error for share cmd @ shmKey =-1
[m[0;32;31m[libfvideo] ERROR  (../../src/videoin.c|createVideoInput|739): [ERROR]: =====>: initialize_share_mem failed
[m[31;40m16:41:10|[Unknown] [ver:Unknown] error DevVideoIn.cpp CDevVideoIn 282 tid:393 createVideoInput errorf
[0m[0;32;31m[libfvideo] ERROR  (../../src/videoin/chips/mt9m034/videoin_mt9m034.c|msghandle_init|60):  error value = -1, errno = No such file or directory, errno = 2
[m[0;32;32m[libfvideo] create captureflagcheck_thread success, pid = 393
... crypto start ....
DH:: [reliableenvvalidate:951] crypto dir=/usr/SigFileList,buf pos=4 

[
 
Tja, irgendwie findet er dir Cam nicht bzw. lädt er den falschen Treiber.
Die CAM und alle Kabel davon hast eh angehängt? Nicht das da durch das rumgebastle irgendwo ein Kontaktfehler entstanden ist.
Da du sie ja mit VDPconfig findest, sollte es kein Problem sein, ne alte V3 Firmware aufzuspielen.
Schlage mal die VTOXXX_EngItlFrnGerDutSpnPrt_P_16M_V3.120.001P000.0.T.20181025 vor - war bei mir keine Problem direkt mit VDPconfig downzugraden.
Dann Factory reset und testen.

Von wo ist die CAM? Welche FW hattest du ursprünglich drauf?
 
Wie ruf ich alle info`s vom Bootloader ab?
Ist es eigentlich egal welche mac und serienummer ich in den Bootloader schreibe?
Die macadressen und seriennummern in meinen funktionierenden geräten stimmen mit den daten die auf den den labels sind nicht überein.
Ich habe natürlich änliche daten eingegeben (wie sie sich im VDPConfig melden).
An der Kamera habe ich nur den grossen deckel entfernt, keine platinenverbinder abgezogen.
 
Die "Nummern" sind sicher nicht "egal" :confused:
Wenn die nie zusammengestimmt haben, dann ist das entweder ein Clone - was ich aber fast nicht glauben kann (Chinese kopiert billigen Chinesen...) oder total verbastelt.
Speziell die Seriennummer gefällt mir nicht - hab aber dazu auch keine Unterlagen. Würde mal alles so eintragen, wie hinten draufgedruckt. Kann sein, dass die Software die Seriennummern für irgendwelche HW-Erkennungen hernimmt - z.b. für das bestimmern der verbauten Kamera.
Die MAC ist mehr egal, wichtig sind die ersten 3 Bytes und die scheinen zu passen.
 
Wie heißt der Stecker der auf die UART-Schnittstelle der Vto2000 kommt?
 
Würde das mal als "female pin header" bezeichnen. Kannst daber auch direkt anlöten.
 
Bestellt
Danke, ich sag ob`s passt.
 
Passt.20190425_211429.jpg
Dankeschön
 
@riogrande75
Ich hätte gern deine HWID von deiner VTO2000.
Nach dem Update auf die General_VTO2000A-2_Eng_P_16M_SIP_V4.300.0000000.1.R.20190305.bin meldet sich meine VTO2000A in VDPConfig als VTO2000A-2, habe aber die normale solo version.Screenshot (94).png
 
Hab gerade meine Test VTO von 3.3nonSIP auf die V4.300 SIP (201903) hochgerüstet. Alles wunderbar. VDPconfig zeigt zwar als Model nun auch VTO2000A-2 an, aber ansonsten scheint alles zu funktionieren.
 
riogrande75
gib mir bitte deine HWID.
Du weißt ja mein VTO2000A Lädt die falschen Treiber.
 
Warum nimmst du nicht meine HWID? Das ist eine funktionierende VTO2000A ohne "-2"
 
Um antworten zu können musst du eingeloggt sein.

Zurzeit aktive Besucher

Gesamt: 432 (Mitglieder: 3, Gäste: 429)

Neueste Beiträge

Statistik des Forums

Themen
246,201
Beiträge
2,247,951
Mitglieder
373,765
Neuestes Mitglied
walterronald99
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.
Ihr E-Mail-Adresse verifizieren

Ihr E-Mail-Adresse verifizieren

Wir haben Ihnen eine E-Mail geschickt. Klicken Sie auf die Schaltfläche im E-Mail-Text, um Ihre E-Mail-Adresse zu verifizieren – (Können Sie diese nicht finden können, dann überprüfen Sie Ihren Spam-Ordner).

IPPF im Überblick

Neueste Beiträge

Direktlinks Telefonanlage

Website-Sponsoren

3CX sponsor
KONTAKTIEREN SIE UNS BEI INTERESSE
| Style by ThemeHouse
XenPorta 2 PRO © Jason Axelrod of 8WAYRUN
Oben Unten
Zurück