VTO2000A unbricking Hilfe Gesucht

stsm

Neuer User
Mitglied seit
23 Nov 2006
Beiträge
55
Punkte für Reaktionen
1
Punkte
8
Hab meine VTO 2000A zerschossen.
TFTP-Server schiebt die Datein auf die VTO.
Code:
Checking DDR......OK

UBL Version: 1.46t(DM365)09:30:17 Sep  2 2014
 Oscillator: 24MHZ
 ARM Rate: 216 MHZ
 DDR Rate: 173 MHZ
 BootMode: SPI
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (Sep  2 2014 - 09:44:01)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: #
done
Bytes transferred = 163 (a3 hex)
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'custom-x.cramfs.img'.
Load address: 0x81a00000
Loading: ##
done
Bytes transferred = 16448 (4040 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   custom
   Image Type:   ARM Linux Standalone Program (gzip compressed)
   Data Size:    16384 Bytes = 16 kB
   Load Address: 02060000
   Entry Point:  02080000
   Data CRC Checking ... OK
Programing start at: 0x00060000
write : 100%
done
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'kernel-x.cramfs.img'.
Load address: 0x81a00000
Loading: #################################################################
         ##################################################
done
Bytes transferred = 1682736 (19ad30 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   linux
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    1682672 Bytes =  1.6 MB
   Load Address: 02080000
   Entry Point:  02280000
   Data CRC Checking ... OK
Programing start at: 0x00080000
write : 100%
done
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'romfs-x.cramfs.img'.
Load address: 0x81a00000
Loading: #################################################################
         #################################################################
         #################################################################
         ##################
done
Bytes transferred = 3117120 (2f9040 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   romfs
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    3117056 Bytes =  3 MB
   Load Address: 02280000
   Entry Point:  02580000
   Data CRC Checking ... OK
Programing start at: 0x00280000
write : 100%
done
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'user-x.cramfs.img'.
Load address: 0x81a00000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #############
done
Bytes transferred = 5910592 (5a3040 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   user
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    5910528 Bytes =  5.6 MB
   Load Address: 028e0000
   Entry Point:  02ee0000
   Data CRC Checking ... OK
Programing start at: 0x008e0000
write : 100%
done
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'web-x.cramfs.img'.
Load address: 0x81a00000
Loading: #################################################################
         #####################################
done
Bytes transferred = 1491008 (16c040 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   web
   Image Type:   ARM Linux Standalone Program (gzip compressed)
   Data Size:    1490944 Bytes =  1.4 MB
   Load Address: 02580000
   Entry Point:  02780000
   Data CRC Checking ... OK
Programing start at: 0x00580000
write : 100%
done
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'data-x.cramfs.img'.
Load address: 0x81a00000
Loading: ########################################################
done
Bytes transferred = 815168 (c7040 hex)

## Checking Image at 0x81a00000 ...
   Header CRC Checking ... OK
   Image Name:   data
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    815104 Bytes = 796 kB
   Load Address: 02ee0000
   Entry Point:  03000000
   Data CRC Checking ... OK
Programing start at: 0x00ee0000
write : 100%
done
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename '.FLASHING_DONE_STOP_TFTP_NOW'.
Load address: 0x82000000
Loading: #
done
string value is The end of file
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'success.txt'.
Load address: 0x80200000
Loading: #
done
Erasing SPI flash...Writing to SPI flash...done
.......
HWID : <NULL>
HWID : ^
HWID error, please set hwid first!!!!!!!!!
DHBOOT#
Seriel kann ich mit ``id`` eine Neu HWID schreiben, aber wie ist die richtige HWID für meine VTO2000A?
 
meine HWID:

Code:
# armbenv -r
[libdvr]
libdvr.so Build time: Apr  5 2017 at 11:33:47.
[libdvr] SVN NUM: 7773.
baudrate = 115200
ethaddr = XX:XX:XX:XX:XX:XX
get armboot para wifiaddr failed
ID = 4EXXXXXXXXXXXXX
HWID = VTO2000A:0:4:1:3:5:0:1:9:3:3:0:1B0:0:0:0:0:0:0:0
dh_keyboard = 1
appauto = 1
bootargs = console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=cramfs,nolock m
em=90M newmem=90M video=davincifb:vid0=OFF:vid1=OFF:osd0=OFF:osd1=OFF
single = 0
log_serverip = (NULL)
 
Ich bekomme keine HWID geschrieben.
Ich weiß gar nicht wie.
 
Du musst per Terminal auf deine VTO eingeben:

Code:
#armbenv -s HWID VTO2000A:0:4:1:3:5:0:1:9:3:3:0:1B0:0:0:0:0:0:0:0

dann muss kommen:
Save enviroment to flash ,Please wait ...
Note!! Don´t power off

Save OK

dann eingeben:

Code:
#reboot
 
Telnet geht nicht, ist zerschossen.
 
Die HWID ist geändert aber ich hänge immer noch in einer Bootschleife.


Code:
Checking DDR......OK

UBL Version: 1.46t(DM365)16:10:30 Aug  4 2017
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (May 23 2018 - 10:46:47)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu            gh gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu            gh gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
Retry count exceeded; starting again
==>use default images
.......
## Booting kernel from Legacy Image at 80007fc0 ...
   Image Name:   Linux-2.6.18_pro500-davinci_evm-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1682608 Bytes =  1.6 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux.............................................................            ..................................................... done, booting the kernel.

Checking DDR......OK

UBL Version: 1.46t(DM365)16:10:30 Aug  4 2017
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (May 23 2018 - 10:46:47)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu            gh gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: #
done
Bytes transferred = 123 (7b hex)
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending throu            gh gateway 192.168.1.1
Filename 'update.img'.
Load address: 0x81a00000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##############################
done
Bytes transferred = 12838416 (c3e610 hex)

## Checking Image at 0x81a00040 ...
   Header CRC Checking ... OK
   Image Name:   linux
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    1799248 Bytes =  1.7 MB
   Load Address: 02060000
   Entry Point:  02260000
   Data CRC Checking ... OK
Programing start at: 0x00060000
write : 100%
done

## Checking Image at 0x81bb74d0 ...
   Header CRC Checking ... OK
   Image Name:   romfs
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    2985984 Bytes =  2.8 MB
   Load Address: 023e0000
   Entry Point:  026e0000
   Data CRC Checking ... OK
Programing start at: 0x003e0000
write : 100%
done

## Checking Image at 0x81e90510 ...
   Header CRC Checking ... OK
   Image Name:   user
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    6516736 Bytes =  6.2 MB
   Load Address: 026f0000
   Entry Point:  02da0000
   Data CRC Checking ... OK
Programing start at: 0x006f0000
write : 100%
done

## Checking Image at 0x824c7550 ...
   Header CRC Checking ... OK
   Image Name:   web
   Image Type:   ARM Linux Standalone Program (gzip compressed)
   Data Size:    1085440 Bytes =  1 MB
   Load Address: 02260000
   Entry Point:  023e0000
   Data CRC Checking ... OK
Programing start at: 0x00260000
write : 100%
done

## Checking Image at 0x825d0590 ...
   Header CRC Checking ... OK
   Image Name:   data
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    405504 Bytes = 396 kB
   Load Address: 02da0000
   Entry Point:  02ec0000
   Data CRC Checking ... OK
Programing start at: 0x00da0000
write : 100%
done

## Checking Image at 0x826335d0 ...
   Header CRC Checking ... OK
   Image Name:   product
   Image Type:   ARM Linux Standalone Program (gzip compressed)
   Data Size:    45056 Bytes = 44 kB
   Load Address: 026e0000
   Entry Point:  026f0000
   Data CRC Checking ... OK
Programing start at: 0x006e0000
write : 100%
done
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename '.FLASHING_DONE_STOP_TFTP_NOW'.
Load address: 0x82000000
Loading: #
done
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'success.txt'.
Load address: 0x80200000
Loading: #
done
Erasing SPI flash...Writing to SPI flash...done
APP_OFFSET_NEW test
.......
## Booting kernel from Legacy Image at 80007fc0 ...
   Image Name:   Linux-2.6.18_pro500-davinci_evm-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1799184 Bytes =  1.7 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux........................................................................................................................ done, booting the kernel.

Checking DDR......OK

UBL Version: 1.46t(DM365)16:10:30 Aug  4 2017
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (May 23 2018 - 10:46:47)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
Retry count exceeded; starting again
==>use default images
APP_OFFSET_NEW test
.......
## Booting kernel from Legacy Image at 80007fc0 ...
   Image Name:   Linux-2.6.18_pro500-davinci_evm-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1799184 Bytes =  1.7 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux........................................................................................................................ done, booting the kernel.

Checking DDR......OK

UBL Version: 1.46t(DM365)16:10:30 Aug  4 2017
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (May 23 2018 - 10:46:47)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
Retry count exceeded; starting again
==>use default images
APP_OFFSET_NEW test
.......
## Booting kernel from Legacy Image at 80007fc0 ...
   Image Name:   Linux-2.6.18_pro500-davinci_evm-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1799184 Bytes =  1.7 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux........................................................................................................................ done, booting the kernel.

Checking DDR......OK

UBL Version: 1.46t(DM365)16:10:30 Aug  4 2017
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (May 23 2018 - 10:46:47)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
Retry count exceeded; starting again
==>use default images
APP_OFFSET_NEW test
.......
## Booting kernel from Legacy Image at 80007fc0 ...
   Image Name:   Linux-2.6.18_pro500-davinci_evm-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1799184 Bytes =  1.7 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux........................................................................................................................ done, booting the kernel.
Habe verschieden update.img-Datein geschrieben alte und neuere aber immer das gleiche die VTO2000 Bootet Bootet. ....
Zum Beispiel General_Overseas_VTOXXX_Eng_P_16M_SIP_V1.000.00.0.R.20170425.zip oder General_VTOXXX_Eng_P_16M_SIP_V4.000.0000000.5.R.20181030.zip
 
Naja, du hast ein nur update.img geflasht.
Würde da schon eher mal ein "ganzes" Image mit allen Partitionen manuell flashen. Und am Anfang nimm mal das 20170425, weil das garantiert noch keine Signaturen beinhaltet.
Du musst all diese Partitionen haben und daher die commands.txt entsprechend anpassen:
Code:
kernel-x.cramfs.img
romfs-x.cramfs.img
data-x.cramfs.img
web-x.cramfs.img
custom-x.cramfs.img
pd-x.cramfs.img
user-x.cramfs.img

Wenn das Teil danach noch immer ein einer Reboot-Schleife ist, muss man rausfinden warum.
Dafür brauchst du die vollen Logs des Hochlaufs.
Kannst du durch folgende Kommandos im Bootloader aktivieren:
Code:
setenv dh_keyboard 0
saveenv
reset
 
General_Overseas_VTOXXX_Eng_P_16M_SIP_V1.000.00.0.R.20170425.bin

Meine commands.txt:
run dc
run dd
run dk
run dr
run du
run dw
tftp 0x82000000 pd-x.cramfs.img; flwrite
tftp 0x82000000 .FLASHING_DONE_STOP_TFTP_NOW
sleep 5

im root-Ordner:
custom-x.cramfs.img
data-x.cramfs.img
kernel-x.cramfs.img
pd-x.cramfs.img
romfs-x.cramfs.img
user-x.cramfs.img
web-x.cramfs.img

und hier das Logfile:

Bitte die .pdf umbenennen in .txt
Dankeschön
 

Anhänge

  • VTO2000log.pdf
    24.5 KB · Aufrufe: 42
Flashen schaut gut aus.
Der reboot wird in Zeile 6 von "app.sh" ausgelöst:
Code:
#! /bin/sh
#for profile.txt
cd /var/tmp
/var/tmp/sonia
state=$?
echo"####application exit:${state}, system will reboot!"
/usr/bin/exittime ${state}
udelay 1500
reboot
Leider kommt es nach dem Start von sonia (ist das Hauptprogramm) zu einem segmentation fault:
Code:
=========================== TRACE START ===================================
Tid:389, Exception type : SIGSEGV
Segmentation fault
./usr/etc/app.sh: line 6: echo####application exit:139, system will reboot!: not found
Naja, wüsste auf Anhieb nicht, wo man da ansetzen könnte. Sonia zu debuggen ist ziemlich unmöglich.
Aber da du die HWID geändert hast, könnte man hier mal ansetzen. Die passt dem sonia vielleicht doch noch nicht.
Hast du da schon mal eine andere probiert oder ein altes Hochlaufprotokoll von vor dem ersten flashen?
Schick mal ein Bild von der Rückseite der VTO, vielleicht finde ich da etwas.
 
@riogrande75
Kannste du mal deine HWID auslesen und reinsetzen? Vielleicht ist deine anders und wir können da ansetzen.
 
Hab meine Spiel-VTO gerade nicht zur Hand. Kann aber evtl. mal in den nächsten Tage nachschaun.
 
Ich habe schon viele verschiedene Firmware probiert.

Hochlaufprotkolle habe ich nicht.

Aber ein Bild
 

Anhänge

  • 20190305_182343.jpg
    20190305_182343.jpg
    1.5 MB · Aufrufe: 61
Juchu geht wieder!
Danke an alle.
Mit HWID neu schreiben und flashen und Power mit Klingeltaste Reset hat es endlich geklappt.
 
Hat also ein Factory-Reset nach dem Setzen der HWID und dem Flashen mit 20170425 den Crash von Sonia (segmentation fault) behoben?
 
Und Reset Klingelknopf-Power.
Aber so richtig gehts noch nicht, sie stürzt ständig ab und es gibt kein Videostream.
Ich versuch gerade über VDPConfig eine ander Software zu instalieren.
 
so geht noch nicht richtig.
zum beispiel der videostream funktioniert nicht
updaten mit ConfigTool oder VDPConfig geht auch nicht.
meine serienummer ist: 0000000000000000000000000.
und die MACadress ist auch falsch.

hier ein log vom hochfahren:


Code:
Checking DDR......OK

UBL Version: 1.46t(DM365)10:21:32 Oct 30 2018
 Oscillator: 24MHZ
 ARM Rate: 432 MHZ
 DDR Rate: 340 MHZ
 BootMode: SPI
Starting SPI Memory Copy...
DONE


U-Boot 1.3.6 (jerry) (Oct 30 2018 - 10:30:03)

DRAM:  128 MB
SF: Got idcode c2 20 18 c2 20
In:    serial
Out:   serial
Err:   serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: *
Retry count exceeded; starting again
==>use default images
.......
## Booting kernel from Legacy Image at 80007fc0 ...
   Image Name:   Linux-2.6.18_pro500-davinci_evm-
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1682608 Bytes =  1.6 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux.................................................................................................................. done, booting the kernel.
Linux version 2.6.18_pro500-davinci_evm-arm_v5t_le ([email protected]) (gcc version 4.2.0 (MontaVista 4.2.0-16.0.32.0801914 2008-08-30)) #1 PREEMPT Tue May 3 16:19:14 CST 2016
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: DaVinci DM365 EVM
new hwid:VTO2000A:0:4:1:3:5:0:1:9:3:3:0:1B0:0:0:0:0:0:0:0
Memory policy: ECC disabled, Data cache writeback
DaVinci DM0365 variant 0x8
prediv = 6, pll0_mult = 85, postiv = 1, pll_div4 = 4, pll_rate = 680000000, pll_div6 = 25
PLL0: fixedrate: 24000000, commonrate: 170000000, vpssrate: 340000000 PLL1_ARMRATE = 340000000
PLL0: vencrate_sd: 27200000, ddrrate: 340000000 mmcsdrate: 136000000
##: prediv = 1, pll1_mult = 9,  postdisv = 1, pll-rate = 432000000, pll_div2 = 1, pll_div4 = 21, pll-div5 = 16
PLL1: armrate: 432000000, voicerate: 20571428, vencrate_hd: 27000000, ddrratePLL2 = 432000000
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists.  Total pages: 22784
dh_keyboard:0
PID hash table entries: 512 (order: 9, 2048 bytes)
Clock event device timer0_0 configured with caps set: 07
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 89MB = 89MB total
Memory: 86448KB available (2936K code, 600K data, 172K init)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
MUX: initialized SPI0_SDENA0
DaVinci: 104 gpio irqs
MUX: initialized GPIO20
MUX: initialized I2C_SCL
pMem_relimitBaseAddr:0xc6000000
Generic PHY: Registered new driver
configured buff delay: 50

SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
product has no spi2 device.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
LTT : ltt-facilities init
LTT : ltt-facility-core init in kernel
davinci_wdt_init proc enable
rtc probe addr 0x68, probeByte 0x00...
RTC_i2c_attach_client:addr:0x68
 == Found RTC chip DS1338, I2C addr 0x68 ==
rtc probe addr 0x6f, probeByte 0x00...
rtc probe addr 0x57, probeByte 0x00...
rtc probe addr 0x32, probeByte 0x00...
DS1338  driver v1.04sem  proc enable,
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
&&&: uart_add_one_port, line = 0, uartclk = 0
&&&: uart_add_one_port, line = 1, uartclk = 170000000
ttyS0: autoconf (0x0000, 0xfbc20000): <6>serial8250.0: ttyS0 at MMIO map 0x1c20000 mem 0xfbc20000 (irq = 40) is a 16550A
&&&: uart_add_one_port, line = 0, uartclk = 24000000
ttyS1: autoconf (0x0000, 0xfbd06000): <6>serial8250.0: ttyS1 at MMIO map 0x1d06000 mem 0xfbd06000 (irq = 41) is a 16550A
&&&: uart_add_one_port, line = 1, uartclk = 170000000
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Linux video capture interface: v2.00
i2c /dev entries driver
System bootup mode:SPI
JECDEC ID : 0xc22018
ext_jedec ID : 0xc220
chip id mx25l12805d
found mx25l12805d in table.
m25p80 spi0.0: mx25l12805d (16384 Kbytes)
Creating 11 MTD partitions on "spi0.0":
0x00000000-0x00040000 : "bootloader"
0x00040000-0x00060000 : "HWID"
0x00060000-0x00080000 : "custom"
0x00080000-0x00280000 : "kernel"
0x00280000-0x00580000 : "rootfs"
0x00580000-0x00780000 : "web"
0x00780000-0x00820000 : "backup"
0x00820000-0x008c0000 : "config"
0x008c0000-0x008e0000 : "product"
0x008e0000-0x00ee0000 : "user"
0x00ee0000-0x01000000 : "data"
dm_spi.0: davinci SPI Controller driver at 0xc6266000 (irq = 42) use_dma=0
[*****geyj******1]register master =0xc06b0800;bus_num = 0
dm_spi.1: davinci SPI Controller driver at 0xc6268800 (irq = 17) use_dma=0
[*****geyj******1]register master =0xc06b0400;bus_num = 1
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver asix
usbcore: registered new driver cdc_ether
usbcore: registered new driver net1080
usbcore: registered new driver zaurus
musb_hdrc: version 6.0, pio, host, debug=0
musb_hdrc: USB Host mode controller at c626a000 using PIO, IRQ 12
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
u32 classifier
    Performance counters on
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Time: timer0_1 clocksource has been installed.
Clock event device timer0_0 configured with caps set: 08
Switched to high resolution mode on CPU 0
IP-Config: No network devices available.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing init memory: 172K

init started: BusyBox v1.9.1 (2015-09-10 20:39:04 CST)

starting pid 195, tty '': '/etc/init.d/dnode'
2.61s

starting pid 200, tty '': '/etc/init.d/rcS'
Sat Mar 16 14:30:23 2019  0.000000 seconds
[0;32;32m[gpio] initialize success, build at 19:30:56, Oct 20 2016[m[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[0;32;32m[gpio] CMD=9, Setting product type: 0
[m[mGIO_SET_PRODU[0;32;32m[gpio] CMD=4, Setting product fchip: 3
[mCT_TYPE = 9
[0;32;32m[gpio] CMD=3, Setting hardware version: 0
[m[0;32;32m[gpio] SD card hardware reset is done, gio55=0.
[mcurrent wdt period=5000 ms
[0;32;32m[libdvcurrent wdt period=25000 ms
r]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[m[syshelper] V1.21(no exit): startup time=25 s, appauto=1, hctosystime=1500,type=0
[syshelper] start watch dog success, period is 25000 ms.
coremnt not found
4.45s

7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18

Extracting cmemk.ko
Extracting davinci_emac.ko
Extracting display.ko
Extracting dm365mmap.ko
Extracting dm365_ad.ko
Extracting edmak.ko
Extracting evdev.ko
Extracting getjif.ko
Extracting h3ak.ko
Extracting i2ckey.ko
Extracting irqk.ko
Extracting mcu_spi.ko
Extracting mfrc522.ko
Extracting mmc_blk.ko
Extracting mmc_core.ko
Extracting mmc_drv.ko
Extracting mymemcpy.ko
Extracting pwm.ko
Extracting pwm_gpio.ko
Extracting Sensor.ko
Extracting sound.ko
Extracting spi.ko
Extracting spi_mcu.ko
Extracting vpbek.ko
Extracting vpfek.ko

Everything is Ok
/mnt/mtd/Config/ppp

7z ANSI-C Decoder 9.20 : Igor Pavlov : Public domain : 2010-11-18

Davinci EMAC MII Bus: probed
Extracting VideoMAC address is 00:01:5b:00:33:44
Daemon

Everything is Ok
/mnt/mtd/Config/ppp
TI DaVinci EMAC Linux version updated 4.0
[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[m[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[m[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[m[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[m[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[mcmem= 90
CMEMK module: built on Apr 14 2010 at 13:45:45
  Reference Linux version 2.6.18
  File /workspace/dm365/dvsdk_2_10_01_18_guangpan/linuxutils_2_24_03/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
allocated heap buffer 0xc7000000 of size 0x2600000
CMEM Range Overlaps Kernel Physical - allowing overlap
CMEM phys_start (0x1000) overlaps kernel (0x80000000 -> 0x85900000)
cmemk initialized
IRQK module: built on Apr 14 2010 at 13:46:34
  Reference Linux version 2.6.18
  File /workspace/dm365/dvsdk_2_10_01_18_guangpan/linuxutils_2_24_03/packages/ti/sdo/linuxutils/irq/src/module/irqk.c
irqk initialized
EDMAK module: built on Apr 14 2010 at 13:46:46
  Reference Linux version 2.6.18
  File /workspace/dm365/dvsdk_2_10_01_18_guangpan/linuxutils_2_24_03/packages/ti/sdo/linuxutils/edma/src/module/edmak.c
getjif init @ 091230
##: HZ = 10
register getjif driver successful !


[0;32;32m[VPBE] VPBE Build on Jan 22 2016 at 17:04:17.
[m[0;32;32m[VPBE] SVN NUM: 5094.

[m[0;32;32m[VPBE] ch0 default output "LCD", mode "800x480"
[m[0;32;32m[VPBE] ch1 default output "COMPOSITE", mode "NTSC"
[m[0;32;32m[VPBE] VPBE Encoder Initialized
[m[0;32;32m[VPBE] options =:vid0=OFF:vid1=OFF:osd0=OFF:osd1=OFF
[m[0;32;32m[VPBE] dm_osd0_fb: 0x0x16@0,0 with framebuffer size 750KB
[m[0;32;32m[VPBE] dm_vid0_fb: 0x0x16@0,0 with framebuffer size 1125KB
[m[0;32;32m[VPBE] dm_osd1_fb: 0x0x4@0,0 with framebuffer size 750KB
[m[0;32;32m[VPBE] dm_vid1_fb: 0x0x16@0,0 with framebuffer size 1125KB
[m[0;32;32m[VPBE] Trying to register davinci display video device.
[m[0;32;32m[VPBE] Trying to register davinci display video device.
[m[0;32;32m[VPBE] davinci_init:DaVinci V4L2 Display Driver V1.0 loaded
[m[0;32;32m[VPBE] VPBE Driver Initial OK, Build On : Jan 22 2016, 17:04:17.
[m

[0;32;32m[VPFE] VPFE Build on Jan 23 2014 at 10:16:27.
[m[0;32;32m[VPFE] SVN NUM: 2726.
[m[0;32;32m[VPFE] VPFE Driver Initial OK, Build On : Jan 23 2014, 10:16:27.
[m

[0;32;32m[H3A] H3A Driver Build on Jan 15 2013 at 17:55:15.
[m[0;32;32m[H3A] SVN NUM: 2721.

[m[0;32;32m[H3A] VideoBuf Driver Initial OK !
[m[0;32;32m[H3A] DEV_h3aHwInit
[m[0;32;32m[H3A] VideoBuf Create queuefor dm365_aew OK !
[m[0;32;32m[H3A] AEW Driver Initial OK !
[m[0;32;32m[H3A] VideoBuf Create queuefor dm365_af OK !
[m[0;32;32m[H3A] AF Driver Initial OK !
[m[0;32;32m[H3A] H3A Driver Initial OK
[m[0;32;32m[SND]build Oct 19 2016 15:20:09 SVN 455
[m[0;32;32m[alc3261] alc3261_powerOn
[m[i2c]Found I2C Device (i2c addr 0x1c)
[0;32;32m[alc3261] VTO2000A alc3261 regs param
[m[0;32;32m[alc3261] init EQ EQMODE:0
[m[0;32;32m[alc3261] EQ disable
[m[base]found the soc chip: alc3261 on i2c bus
[0;32;32m[MCBSP] word0=0, word1=2
[m[0;32;32m[MCBSP] word_num=2
[m[0;32;32m[MCBSP] word_length=16
[m[0;32;32m[MCBSP] word0=0, word1=2
[m[0;32;32m[MCBSP] word_num=2
[m[0;32;32m[MCBSP] word_length=2
[m[0;32;32m[alc3261] alc3261 set rate 16000
[m[0;32;32m[alc3261] VTO2000A aec param
[m[0;32;32m[alc3261] mono left gain value 95
[m[0;32;32m[alc3261] alc3261_mono_ad_gain_l vol=0x5400
[m[0;32;32m[alc3261] alc3261_spo_l volume=70
[m[0;32;32m[alc3261] alc3261_spo_l vol=0x8700
[m[0;32;32m[alc3261] alc3261_vol_outl volume=100
[m[0;32;32m[alc3261] alc3261_vol_outl vol=0x9f00
[mBusyBox v1.9.1 (2015-09-10 20:39:04 CST) multi-call binary

Usage: mknod [OPTION] DIRECTORY...

Create the DIRECTORY(ies) if they do not already exist

Options:
   -m   Set permission mode (as in chmod), not rwxrwxrwx - umask
   -p   No error if existing, make parent directories as needed

[0;32;32m[spi_smlt] Serving For product VTO2000A by spi hardware.

[m[0;32;32m[spi_smlt] initialize success, build at 16:57:20, Mar 24 2016
[m[0;32;32m[spi_smlt] delay 10us

[m[0;32;32m[sensor]
[mArchive:  /mnt/p[0;32;32m[sensor] Sensor.ko Build on Sep 24 2014 at 15:13:41.
[md/product.zip
 [0;32;32m[sensor] SVN NUM: 4159.
[m  creating: prod[0;32;32m[sensor] The Sensor Driver Version:Ver 2.0
[muct/
   creating: product/IPC-HF3100/
  inflating: product/IPC-HF3100/DefaultAccount
  inflating: product/IPC-HF3100/CustomConfig
  inflating: product/IPC-HF3100/ProductDefinition
[0;32;32m[sensor] Error, When read the reg 12288,line :1291
[m[0;32;31m[sensor] ERROR  (/home/li_sai/nfs1/vd/zw_sensor/P_2012.04.24_Sensor_ZW/build/../src/chips/mt9m034/mt9m034.c|mt9m034_check|37): Try to get modle id error!!!
You'd Better check Your IIC bus!!
[m[0;32;31m[sensor] ERROR  (/home/li_sai/nfs1/vd/zw_sensor/P_2012.04.24_Sensor_ZW/build/../src/chips/mt9m034/mt9m034.c|mt9m034_init|2148): MT9M034 error!
[m[0;32;31m[sensor] ERROR  (/home/li_sai/nfs1/vd/zw_sensor/P_2012.04.24_Sensor_ZW/build/../src/base/base.c|sensor_chip_create|368): When init the chip mt9m034, error happened!
Maybe Cannot create bus, or create then clock
If the chip need the clock, have U registered
it for the sensor???
[m[0;32;31m[sensor] ERROR  (/home/li_sai/nfs1/vd/zw_sensor/P_2012.04.24_Sensor_ZW/build/../src/comm/sensor.c|sensor_init|768): sensor device init failed
[minsmod: cannot insert '/var/lib/modules/Sensor.ko': Bad address
Archive:  /mnt/pd/2Acfg.zip
   creating: 2Acfg/
   creating: 2Acfg/AR0130/
  inflating: 2Acfg/AR0130/aew_para.txt
  inflating: 2Acfg/AR0130/aew_para.bin
   creating: 2Acfg/MT9M034/
  inflating: 2Acfg/MT9M034/aew_para.txt
  inflating: 2Acfg/MT9M034/aew_para.bin
   creating: 2Acfg/OV9712/
  inflating: 2Acfg/OV9712/aew_para.txt
  inflating: 2Acfg/OV9712/aew_para.bin
cat: can't open '/proc/sensor': No such file or directory
sh: ar0130: unknown operand
sh: mt9m034: unknown operand
sensor_name:
[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[monly init eth0
"netinit help" for help
eth0:
MAC: <00:01:5b:00:33:44>
<3>1:01 not found
[0;32;31m[libdvADDRCONF(NETDEV_UP): eth0: link is not ready
r] ERROR  (../src/net/net.c|SetGateWay|906): SIOCADDRT
SIOCADDRT: Network is unreachable
[m[0;32;31m[libdvr] ERROR  (../src/net/net.c|SetEthAttr|1229): SetGateWay error
IP: <192.168.1.110>       netmask: <255.255.255.0>
netinit uses obsolete (PF_INET,SOCK_PACKET)
Gateway: <192.168.1.1>
[m[libdvr] set success

[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[mIPV6: only init eth0
"netinit6 help" for help
eth0:
MAC: <00:01:5b:00:33:44>
IPV6: <2008::6>       preFixLen: <112>
[1;33m[libdvr] WARN  (../src/net/network6.c|NetWorkDelIP|981): del ip failed:No such device or address
[mIPV6 Gateway: <2008::1>

[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[mUPGRADED_MSG: Do memlock
UPGRADED_MSG: lock failure: addrStart=4002b000, addrEnd=40032000
UPGRADED_MSG: lock failure: addrStart=4006f000, addrEnd=40076000
UPGRADED_MSG: lock failure: addrStart=400bc000, addrEnd=400c4000
UPGRADED_MSG: lock failure: addrStart=400c8000, addrEnd=400cf000
UPGRADED_MSG: lock failure: addrStart=401e8000, addrEnd=401f0000
UPGRADED_MSG: lock failure: addrStart=40201000, addrEnd=40208000
Name: upgraded, bulid date: Dec 19 2014 17:18:02, svn: 448
UPGRADED_MSG: start download file!
[0;32;32m[libdvr]
libdvr.[edma_ioctl] EDMA_INIT
so Build time: Dedma_init:ch:0,tcc:0
ec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[m[0;32;32m[VD]vd Build Mar 30 2017 15:50:19 SVN 4936
[VD]VPSS: disable GCK~RSZ Wait for H3A CLOCK DISALBE
[m[0;32;32m[VD]EDMA Channel Num 0
[m[0;35m[CFG]found VTO2000A id 42
[m[0;32;31m[CFG]Open /dev/sensor fail!
[m[0;35m[CFG]Device -- VTO2000A, the same to VTT201
[m[0;32;32m[CFG]Product Name : VTO2000A
[m[0;32;32m[CFG]Product Id = 42
[m[0;32;32m[CFG]Sensor Id = 3
[m[0;32;32m[CFG]HareWare Id = 0
[m[0;32;32m[CFG]hwInterface Id = 0
[m[0;32;32m[CFG]dspChip Id = 5
[m[0;32;32m[VD]VTT201 720p INIT
[m[0;32;31m[VD]ERROR  (cfg_AR0130_VTO1210A_X.c|CFG_sensorOpen|489): Open device /dev/sensor fail!
[m[0;32;31m[VD]ERROR  (cfg_AR0130_VTO1210A_X.c|CFG_sensorTypeGet_VTO1210A_X|542): Wrong SensorType For VTO1210A_X!
[m[0;35m[VD]sensorType: 1073893376
[m[0;35m[VD]productID:  42
[m[0;32;31m[VD]ERROR  (cfg_Server_VTO1210A_X.c|CFG_prvInit_VTT201|207):
[m[0;32;31m[CFG]ERROR  (cfg_public.c|CFG_pubConfigInit|618):  pPrivInit()
[m[0;32;31m[VD]ERROR  (videoServerCfg.c|VIDEO_serverCfgInit|94): CFG_pubConfigInit()
[m[0;32;31m[videoServe]ERROR  (videoServe.c|VIDEO_serverInit|155): VIDEO_serverCfgInit()
[m[0;32;31m[VD]ERROR  (videoServerMain.c|main|45): VIDEO_serverInit()
[m[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[monly init eth2"netinit help" for help

starting pid 385, tty '': '/etc/init.d/appd'
[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[mclaststate V1.0 for dm365times=0 @@@; usdate = 0xdca0e7a2
mode: normal
Sat Mar 16 14:30:34 2019  0.000000 seconds
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[0;32;32m[libdvr]
libdvr.so Build time: Dec 13 2016 at 16:18:07.
[m[0;32;32m[libdvr] SVN NUM: 7611.
[m|14:30:40|[StreamApp][InitStreamAppComponentLibrary.cpp:28]|INFO [StreamAppComponent] register all Component
|14:30:40|[StreamApp][StreamApp.cpp:18]|INFO [StreamAppComponent] initStreamAppServerComponent
|14:30:40|[StreamApp][DHEncryptLiveStreamSource.cpp:17]|INFO [StreamAppComponent] initStreamAppDHEncryptComponent
|14:30:40|[StreamApp][RtspRealStream.cpp:35]|INFO [StreamAppComponent] initStreamAppRtspStreamSourceComponent
real stream factory, Src/Rtsp/Client/RtspRealStream.h:188, iid=StreamSource
|14:30:40|[StreamApp][QuickMulticast.cpp:17]|INFO [StreamAppComponent] initStreamAppQuickMulticastComponent
|14:30:40|[StreamApp][TalkbackClient.cpp:12]|INFO [StreamAppComponent] initStreamAppHttpTalkClientComponent
|14:30:40|[StreamApp][TsMulticastService.cpp:7]|INFO [StreamAppComponent] initStreamAppTsMulticastServiceComponent
|14:30:40|[StreamApp][UdpMulticastService.cpp:7]|INFO [StreamAppComponent] initStreamAppUdpMulticastServiceComponent
|14:30:40|[StreamApp][TalkbackSvr.cpp:18]|INFO [StreamAppComponent] initStreamAppHttpTalkbackSvrComponent
|14:30:40|[StreamSvr#363472][TransformatBase.cpp:9]|INFO [StreamAppComponent] initStreamSvrParseCreaterComponent
|14:30:40|[StreamApp][MikeyAdapter.cpp:21]|INFO [StreamAppComponent] initStreamAppDHEncryptClientComponent
|14:30:40|[StreamApp][RealTalkStream.cpp:11]|INFO [StreamAppComponent] initStreamAppZWANGComponent
CheckHwid :VTO2000A:0:4:1:3:5:0:1:9:3:3:0:1B0:0:0:0:0:0:0:0
[33;40m14:30:41|[Manager] [ver:Unknown] warn CommonConfigManager.cpp config 136 tid:393 CCommonConfigManager::CCommonConfigManager() read custom config file failed.
[0m[0;32;32m[libdvr] At the start of getSystemInfo
[m[libdvr] @@@@ buf = 0000000000000000000000000000000000
[33;40m14:30:41|[Manager] [ver:] warn  tid:393 init:84 use default cmos def path!
[0m[0;32;32m[libdvr] getStartUpFlag: 1
[m[32;40m14:30:41|[Manager] [ver:] info  tid:393 CMagicBox::CMagicBox() getStartUpFlag 1
[0m[32;40m14:30:41|[Manager] [ver:] info  tid:393 CMagicBox::onConfigAutoMaintain day = [2], hour = [2], min = [0], enable = [true]
[0m[32;40m14:30:41|[Manager] [ver:] info  tid:393 CMagicBox::startDstTune readCMOS DstTune flag is 0.
[0m[36;40m14:30:41|[libInfra] [ver:] debug  tid:397 ThreadBody Enter name = WatchDog, id = 397, prior = N1, stack = 0x41d79e24
[0m[33;40m14:30:41|[Manager] [ver:] warn  tid:393 CMagicBox::CMagicBox() load product definition Resolution file failed.
[0m[33;40m14:30:41|[Manager] [ver:] warn  tid:393 CMagicBox::CMagicBox() load product definition language file failed.
[0m[32;40m14:30:41|[Manager] [ver:] info  tid:393 CMagicBox::m_systemInfo.noPtz == [0]
[0m[32;40m14:30:41|[Manager] [ver:] info  tid:393 CMagicBox::m_systemInfo.noSdCard == [0]
[0m[32;40m14:30:41|[Manager] [ver:] info  tid:393 CMagicBox::m_systemInfo.bandWidth == [0]
[0m[32;40m14:30:41|[Manager] [ver:Unknown] info Locales.cpp SetLanguage 295 tid:393 SetLanguage(English) load file:/mnt/data/Strings/English.txt
[0m[37;40m14:30:41|[Manager] [ver:Unknown] trace Locales.cpp SetLanguage 321 tid:393 CLocales::SetLanguage()===============>>>/mnt/data/Strings/English.txt
[0m[31;40m14:30:41|[Manager] [ver:Unknown] error UserManager.cpp initialize 334 tid:393 currDevSerial:0000000000000000000000000000000000
[0m[31;40m14:30:41|[Manager] [ver:Unknown] error UserManager.cpp initialize 346 tid:393 DevInformation'SerialID:0000000000000000000000000000000000
[0m[37;40m14:30:41|[] [ver:] trace  tid:393 Src/Main.cpp 633 restoreNetCfg
[0m[37;40m14:30:41|[] [ver:] trace  tid:393 restoreNetCfg fgets line:PRIO = 0

[0m[37;40m14:30:41|[] [ver:] trace  tid:393 restoreNetCfg fgets line: = =

[0m[37;40m14:30:41|[] [ver:] trace  tid:393 restoreNetCfg fgets line:HOSTIP = 192.168.1.110

[0m[37;40m14:30:41|[] [ver:] trace  tid:393 restoreNetCfg fgets line:SUBMASK = 255.255.255.0

[0m[37;40m14:30:41|[] [ver:] trace  tid:393 restoreNetCfg fgets line:GATEWAYIP = 192.168.1.1

[0m[37;40m14:30:41|[] [ver:] trace  tid:393 [main:restoreNetCfg]netIP:192.168.1.110, submsk:255.255.255.0, gateway:192.168.1.1
[0m[37;40m[36;40m14:30:41|[libInfra] [ver:] debug  tid:398 ThreadBody Enter name = Console, id = 398, prior = N1, stack = 0x41f79e24
[0m14:30:41|[Manager] [ver:Unknown] trace Log.cpp attachFilter 133 tid:393 CLog::attachFilter
[0m[33;40m14:30:41|[Manager] [ver:] warn  tid:393 CMagicBox::getDeviceSubClass DeviceSubClass empty !
[0m[36;40m14:30:41|[Manager] [ver:Unknown] debug TelnetHelper.cpp onConfigTelnet 77 tid:393 CTelnetConfigHelper::onConfigTelnet(), m_cfgtelnet: null

[0m[36;40m14:30:41|[Manager] [ver:Unknown] debug TelnetHelper.cpp onConfigTelnet 83 tid:393 ConfigTelnet={
   "Enable" : true
}

[0m[0;32;32m[libdvr] enable telnetd
[m[36;40m14:30:41|[Manager] [ver:Unknown] debug TelnetHelper.cpp onConfigTelnet 110 tid:393 setTelnet interface ok!!!!!!!!,110,Src/Helper/TelnetHelper.cpp
[0m[32;40m14:30:41|[Manager] [ver:Unknown] info Client.cpp CLocalClient 40 tid:393 CLocalClient::CLocalClient(0x0x41ad7cf0)>>>>>>
[0m[32;40m14:30:41|[Manager] [ver:Unknown] info Client.cpp execLogin 760 tid:393 si.loginType=0, si.clientAddress=127.0.0.1, si.clientType=GUI si.authorityInfo= si.authorityType= si.passwordType=
[0m[37;40m14:30:41|[Manager] [ver:Unknown] trace IPAddressCheck.cpp IsIPContainedIn 410 tid:393 IsIPContainedIn  [127.0.0.1-127.0.0.1], [127.0.0.1]
[0m[37;40m14:30:41|[Manager] [ver:Unknown] trace Md5UserManager.cpp IsUserValid 528 tid:393 CMd5UserManager::IsUserValid() user 'default' isn't exist
[0m[31;40m14:30:41|[Manager] [ver:Unknown] error Client.cpp execLogin 843 tid:393 CLocalClient::login() failed with:268632085!
[0m[36;40m14:30:41|[libInfra] [ver:] debug  tid:393 [Src/Component/ComponentFactory.cpp:115] tid:393, iid=UserManager could not been generated because log failed.
[0m[31;40m14:30:41|[] [ver:] error  tid:393 Error:
[0m[32;40m14:30:41|[] [ver:] info   tid:393 CRasterFont::CRasterFont load file '/mnt/data/Fonts/Font.bin' successfully!
[0m[32;40m14:30:41|[] [ver:] info   tid:393 CRasterFont::CRasterFont load file '/mnt/data/Fonts/Font24.bin' successfully!
[0m[32;40m14:30:41|[] [ver:] info   tid:393 ==========================
[0m[32;40m14:30:41|[] [ver:] info   tid:393 mem = 0x41f7c000 0x00000000 0x00000000
[0m[32;40m14:30:41|[] [ver:] info   tid:393 pitch = 0
[0m[32;40m14:30:41|[] [ver:] info   tid:393 width = 0
[0m[32;40m14:30:41|[] [ver:] info   tid:393 height = 0
[0m[32;40m14:30:41|[] [ver:] info   tid:393 foramt = 1
[0m[32;40m14:30:41|[] [ver:] info   tid:393 ==========================
[0m[32;40m14:30:41|[] [ver:] info   tid:393 ==========================
[0m[32;40m14:30:41|[] [ver:] info   tid:393 mem = 0x42038000 0x00000000 0x00000000
[0m[32;40m14:30:41|[] [ver:] info   tid:393 pitch = 0
[0m[32;40m14:30:41|[] [ver:] info   tid:393 width = 0
[0m[32;40m14:30:41|[] [ver:] info   tid:393 height = 0
[0m[32;40m14:30:41|[] [ver:] info   tid:393 foramt = 1
[0m[32;40m14:30:41|[] [ver:] info   tid:393 ==========================
[0m[32;40m14:30:41|[] [ver:] info   tid:393 main flash(16M)
[0m[36;40m14:30:41|[] [ver:] debug  tid:393 tracepoint: Src/Main.cpp, 1009.
[0m[33;40m14:30:41|[] [ver:] warn   tid:393 GUI Mouse not config
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/bmp_frame.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_select.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_focus.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_select.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/edit_focus.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/button/button_normal.png failed!
[0m[33;40m14:30:42|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 633 tid:393 load std::string '&comstring.sunday' failed!
[0m[33;40m14:30:42|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 633 tid:393 load std::string '&comstring.monday' failed!
[0m[33;40m14:30:42|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 633 tid:393 load std::string '&comstring.tuesday' failed!
[0m[33;40m14:30:42|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 633 tid:393 load std::string '&comstring.wednesday' failed!
[0m[33;40m14:30:42|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 633 tid:393 load std::string '&comstring.thursday' failed!
[0m[33;40m14:30:42|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 633 tid:393 load std::string '&comstring.friday' failed!
[0m[33;40m14:30:42|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 633 tid:393 load std::string '&comstring.saturday' failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 CheckBox not config
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 ComboBox not config
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 GroupBox not config
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 InputTray not config
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 CharList not config
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/tree_select_bg.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/menu_arrow_right.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 NumberBox not config
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/bmp_frame.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/main_frame.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/main_frame_title.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/pagebase/button_close_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/pagebase/button_help_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/loadingbar_bg.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/loadingbar.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/radio_checked_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/radio_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 ScrollBar not config
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/sliderctrl/tracker_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/sliderctrl/slider_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/sliderctrl/slider_select.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/sliderctrl/slider_focus.png failed!
[36;40m14:30:42|[libInfra] [ver:] debug  tid:400 ThreadBody Enter name = ClientCheck, id = 400, prior = N64, stack = 0x424f2e24
[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:401 ThreadBody Enter name = CMOS Timer, id = 401, prior = N64, stack = 0x426f2e24
[0m[32;40m14:30:42|[Manager] [ver:] info  tid:401 ========================================================================
[0m[32;40m14:30:42|[Manager] [ver:] info  tid:401 CMagicBox::onSecondTimer current date and time are : 16-03-2019 14:30:42
[0m[32;40m14:30:42|[Manager] [ver:] info  tid:401 ========================================================================
[0m[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/nas_checked_select.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/nas_checked_select.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/nas_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/radio/nas_normal.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 TimeSection not config
[0m[36;40m14:30:42|[Manager] [ver:Unknown] debug CommonConfigManager.cpp writeFile 1185 tid:396 tracepoint:
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/expand1.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/expand2.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/shrink1.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 LoadBitmap() Load file /mnt/data/Skins/shrink2.png failed!
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 Cursor not config
[0m[37;40m14:30:42|[] [ver:] trace  tid:393 Page Open Background
[0m[36;40m14:30:42|[] [ver:] debug  tid:393 tracepoint: Src/Page.cpp, 489.
[0m[33;40m14:30:42|[] [ver:] warn   tid:393 InputTray not create
[0m[32;40m14:30:42|[NetFramework] [ver:] info  tid:393 [*] NetFramework 1.0.0.343569 Built in May  9 2016 12:13:40[*]
[0m[32;40m14:30:42|[NetFramework] [ver:] info  tid:393 [*] NetFramework with open_sslVerison= 1.0.2h Built in May  9 2016 12:13:40[*]
[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:399 ThreadBody Enter name = GUI, id = 399, prior = N64, stack = 0x422f2e24
[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:402 ThreadBody Enter name = CStorageManager, id = 402, prior = N64, stack = 0x428f2e24
[0m[0;32;32m[libdisk] >----------before:add/remove event---------------->
[m[0;32;32m[libdisk] Open /sys/bus/mmc/devices/ failed
[m[0;35m[libdisk] Find 0 device
[m[0;32;32m[libdisk] <----------before:add/remove event----------------<
[m[libdisk] Snap a hotplug:
[0;32;32m[libdisk] Open /sys/bus/mmc/devices/ failed
[m[0;35m[libdisk] Find 0 device
[m[1;33m[libdisk] WARN  : GetScsiDeviceList for the 1 time......
[m[0;32;32m[libdisk] Open /sys/bus/mmc/devices/ failed
[m[0;35m[libdisk] Find 0 device
[m[1;33m[libdisk] WARN  : GetScsiDeviceList for the 2 time......
[m[0;32;32m[libdisk] Open /sys/bus/mmc/devices/ failed
[m[0;35m[libdisk] Find 0 device
[m[1;33m[libdisk] WARN  : GetScsiDeviceList for the 3 time......
[m[0;32;32m[libdisk] Open /sys/bus/mmc/devices/ failed
[m[0;35m[libdisk] Find 0 device
[m[0;32;32m[libdisk] ScsiDeviceListLength: 0
[m[0;32;32m[libdisk] >-----------------------getStorageList stepout------------------------>
[m[0;32;32m[libdisk] <------------------------getStorageList stepout-----------------------<
[m[36;40m14:30:42|[libInfra] [ver:] debug  tid:403 ThreadBody Enter name = NetFramework, id = 403, prior = N64, stack = 0x42af2e24
[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:404 ThreadBody Enter name = NetFramework, id = 404, prior = N64, stack = 0x42cf2e24
[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:405 ThreadBody Enter name = NetFramework, id = 405, prior = N64, stack = 0x42ef2e24
[37;40m14:30:42|[] [ver:] trace  tid:393 >>>>>>>>>>>>>>getVideoInputDeviceChannels:1
[0m[37;40m14:30:42|[] [ver:] trace  tid:393 repareConfigs,tableName:Talkback
[0m[0;32;32m[libfvideo] built at Oct 21 2014 13:34:49, SVN 15637 ==
[m[libfvideo] ##: ===============>: stand = 0
[1;33m[libfvideo] WARN  (../../src/videoin.c|attach_shm_cmdarea|54):  create shmID error for share cmd @ shmKey =-1
[m[0;32;31m[libfvideo] ERROR  (../../src/videoin.c|createVideoInput|836): [ERROR]: =====>: initialize_share_mem failed
[m[0;32;31m[libfvideo] ERROR  (../../src/videoin/chips/mt9m034/videoin_mt9m034.c|msghandle_init|48):  error value = -1, errno = No such file or directory, errno = 2
[m[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:406 ThreadBody Enter name = NetFramework, id = 406, prior = N64, stack = 0x430f2e24
[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:407 ThreadBody Enter name = NetFramework, id = 407, prior = N64, stack = 0x432f2e24
[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:408 ThreadBody Enter name = NetFramework, id = 408, prior = N64, stack = 0x434f2e24
[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:409 ThreadBody Enter name = NetFramework, id = 409, prior = N64, stack = 0x436f2e24
[0m[36;40m14:30:42|[libInfra] [ver:] debug  tid:410 ThreadBody Enter name = NetFramework, id = 410, prior = N64, stack = 0x438f2e24
[0m[37;40m14:30:44|[libInfra] [ver:] trace  tid:397 CThreadManager::CThreadManager()>>>>>>>>>
[syshelper] sonia begin to feed wdt.
[0m[0;32;31m[libfvideo] ERROR  (../../src/videoin/chips/mt9m034/videoin_mt9m034.c|msghandle_init|52): ----still error
[m[0;32;32m[libfvideo] set video standard=0 (0.PAL  1.NTSC  2.SECAM).
[m==>videoout_channels=1
[33;40m14:30:46|[Manager] [ver:Unknown] warn Locales.cpp GetParsedString 633 tid:393 load std::string '&conf_img.channel1' failed!
[0m[0;32;32m[libfvideo] set color brightness=52, contrast=45, hue=51, saturation=48.
[m[0;32;32m[libfvideo] ##############################################
[mbacklight=0
dayNightColor=0
mirror=0
flip=0
exposure=0
whiteBalance=1
gain=95
gainAuto=1
infraRed=0
signalFormat=0
rotate90=0
externalSyncPhase=0
exposureValue1=10.000000
exposureValue2=10.000000
refrenceLevel=50
gainRed=24
gainGreen=0
gainBlue=28
flashMode=0
flashPole=0
flashValue=0
externalSync=0
brightnessThreshold=0
colorTemperatureLevel=0
doubleExposure=0
exposureValue3=0.000000
externalSyncPhase1=0
wideDynamicRange=0
optionsIndex=0
wideDynamicRangeMode=0
dutyCycle=0
frequencyMultiple=0
autoSyncPhase=0
externalSyncPhase2=0.000000
glareInhibition=0
gainMin=0
exposureMode=0
gainMax=0
antiFlicker=0
pad1=1538
colorTemperatureLevel2=0
reserved[0]=0
[0;32;32m[libfvideo] ##############################################

[m[0;32;32m[libfvideo] set gain=95, gainAuto=1,gain_flag=0
[m[0;32;32m[libfvideo] set option exposure exposure=0, exposureValue1=10.000000, exposureValue2=10.000000.
[m[0;32;32m[libfvideo] set whiteBalance=1.
[m[0;32;32m[libfvideo] set option mirror=0.
[m[0;32;32m[libfvideo] set option filp=0.
[m==>videoout_channels=1


[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc] lidec build at: Dec 16 2016:10:21:31
[m[0;32;32m[libenc] Version:7548
[m[0;32;32m[libenc]build options:snatch SUP_MJEG
[m[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc]enter initialize_share_mem 1 times,init_flag=0
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|attach_shm_encode2app|1276):  create shmID error
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|initialize_share_mem|1390): attach_shm_encode2app err
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|createVideoEncoder|1520): initialize_share_mem failed
[m

[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc] lidec build at: Dec 16 2016:10:21:31
[m[0;32;32m[libenc] Version:7548
[m[0;32;32m[libenc]build options:snatch SUP_MJEG
[m[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc]enter initialize_share_mem 2 times,init_flag=0
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|attach_shm_encode2app|1276):  create shmID error
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|initialize_share_mem|1390): attach_shm_encode2app err
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|createVideoEncoder|1520): initialize_share_mem failed
[m

[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc] lidec build at: Dec 16 2016:10:21:31
[m[0;32;32m[libenc] Version:7548
[m[0;32;32m[libenc]build options:snatch SUP_MJEG
[m[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc]enter initialize_share_mem 3 times,init_flag=0
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|attach_shm_encode2app|1276):  create shmID error
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|initialize_share_mem|1390): attach_shm_encode2app err
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|createVideoEncoder|1520): initialize_share_mem failed
[m

[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc] lid[0;32;32m[SND]format = 16, skip!!!!!!!
[mec build at: Dec[0;32;32m[SND]channel = 2, skip!!!!!!!
[m 16 2016:10:21:3[0;32;32m[SND]rate = 16000, skip!!!!!!!
[m1
[m[0;32;32m[libenc] Version:7548
[m[0;32;32m[libenc]build options:snatch SUP_MJEG
[m[0;32;32m[libenc] ++++++++++++++++++++++++++++++++++++++++++++++++++++++
[m[0;32;32m[libenc]enter initialize_share_mem 4 times,init_flag=0
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|attach_shm_encode2app|1276):  create shmID error
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|initialize_share_mem|1390): attach_shm_encode2app err
[m[0;32;31m[libenc]ERROR  (/home01/25024/nfs1/dm365/libenc/build/../src/libenc/libenc.c|createVideoEncoder|1520): initialize_share_mem failed
[m[0;32;32m[libaudio] libaudio build on Jan  6 2017 at 10:43:12
[m[0;32;32m[libaudio] SVN NUM:35196
[m[0;32;32m[libaudio] FRAME_SIZE=2560
[m[1;33m[libaudio] entry audio_set_hardware_para
[m[1;33m[libaudio] <<<<<<<<<< set audio priority -17>>>>>>>>>>
[m[1;33m[libaudio] priv->caps->tpyes=13, formatCount = 4
[m[1;33m[libaudio] create audio encoder,id=0
[m[1;33m[libaudio] priv->caps->tpyes=13, formatCount = 4
[m[1;33m[libaudio] create audio encoder,id=1
[m[1;33m[libaudio] priv->caps->tpyes=13, formatCount = 4
[m[1;33m[libaudio] create audio encoder,id=2
[m[1;33m[libaudio] priv->caps->tpyes=13, formatCount = 4
[m[1;33m[libaudio] create audio encoder,id=3
[m[1;33m[libaudio] priv->caps->tpyes=13, formatCount = 4
[m[1;33m[libaudio] create audio encoder,id=4
[m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :0
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :0
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :0
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :4
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :4
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :4
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :3
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :3
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :3
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :33
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :33
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :33
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :6
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :4
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :4
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :0
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :0
[0m[37;40m14:30:47|[] [ver:] trace  tid:393 Stream::ImageSizeType type :0
[0m[33;40m14:30:47|[Manager] [ver:Unknown] warn CommonConfigManager.cpp getConfig 244 tid:393 CCommonConfigManager::getConfig Record is Json::nullValue!
[0m[1;33m[libaudio] set audio encoder[1] format:PCM16 frequency:16000
[m[1;33m[libaudio] set audio encoder[1] format:PCM16 frequency:16000
[m[1;33m[libaudio] set audio encoder[1] format:G711A frequency:8000
[m[1;33m[libaudio] set audio encoder[1] format:G711A frequency:8000
[m[1;33m[libaudio] set audio encoder[1] format:G711A frequency:8000
[m[0;32;32m[libfvideo] ##############################################
[mbacklight=0
dayNightColor=0
mirror=0
flip=0
exposure=0
whiteBalance=1
gain=95
gainAuto=1
infraRed=0
signalFormat=0
rotate90=0
externalSyncPhase=0
exposureValue1=10.000000
exposureValue2=10.000000
refrenceLevel=50
gainRed=24
gainGreen=0
gainBlue=28
flashMode=0
flashPole=0
flashValue=0
 
Zuletzt bearbeitet:
Denke mal, die MAC kannst du nur im Bootloader einstellen.
Hab grad nix zum testen da, aber schau mal ob es so ein Kommando vielleicht gibt:
Code:
=> setenv eth0addr xx:xx:xx:xx
=> saveenv
 
Wie beende ich diese Logausgabe?
setenv dh_keyboard 0
saveenv
reset
 
Probiermal das letzte Kommando zu negieren, also 0 auf 1 zu setzen.
 
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.