Freetz für Fritzbox 7320??

Sidebar Sidebar
Upgrade 3CX to v18 and get it hosted free!
R

rockadoodle

Neuer User
Mitglied seit
27 Mrz 2008
Beiträge
2
Punkte für Reaktionen
0
Punkte
0
Hallo zusammen,

ich habe von 1und1 eine Fritzbox 7320 erhalten. Auf die dieser würde ich gerne Freetz installieren um die Firtzbox um die torrent Unterstützung zu erweitern. Doch leider finde ich auf der Freetz Homepage weder unter "Browse Source" noch sonst wo auf der Homepage keinerlei Hinweis ob die Fritzbox 7320 unterstützt wird.

Deshalb würde ich gerne wissen, ob die Fritzbox 7320 unterstützt wird und von welcher Freetz Version? Hat jemand von euch vielleicht schon Erfahrung gesammelt mit der 7320 im Zusammenspiel mit Freetz?

Vielen Dank für eure Antworten.

THX
rockadoodle
 
Zuletzt bearbeitet:
Unterstützung für die 7320 ist derzeit im 7390 branch (branches/oliver). Ich habe noch keine Rückmeldung, ob es funktioniert. Aufgrund der vielen Abweichungen dieser Firmware zu allen anderen bezweifle ich jedoch, dass ein gebautes Image auf der Box läuft...

Gruß
Oliver
 
Hallo Oliver,

vielen Dank für deine Antwort. Gibt es denn eine andere Möglichkeit einen Torrent Client auf der Fritzbox zum laufen zu kriegen ohne Freetz?

Danke
Rockadoodle
 
rockadoodle schrieb:
[Edit frank_m24: Vollzitat gelöscht, siehe Forumregeln.]
Zum Vergrößern anklicken....
Hy Hy Leute
Hab auch das Problem mit der Fritzbox 7320 von 1u1 meine Frage gibt es da alternativen wie ich mein Apache Server ohne Install am PC, zum laufen bekomme.
Zugriff per FTP ist ja klar aber ich möchte eine Komplette Homepage drauf Speisen.
Gruß
Patrick
 
@olistudent: Hallo, habe gerade mal versucht, ein Image für die 7320 zu bauen.

Code: 
svn co http://svn.freetz.org/branches/oliver/7390 freetz-branch-7390
make menuconfig
==>Hardware type (Fon WLAN 7320 (Experimental))
==>Exit
==>Yes
make

Habe extra keine Addons o.ä. gewählt, um zu testen, ob überhaupt etwas lauffähiges dabei herauskommt, aber es wird kein Image erstellt. Das Log sieht so aus:
Code: 
toolchain/make/target/gcc/gcc.mk:85: Warnung: Die Befehle für das Ziel »dl/gcc-4.4.5.tar.bz2« werden überschrieben
toolchain/make/kernel/gcc/gcc.mk:53: Warnung: Alte Befehle für das Ziel »dl/gcc-4.4.5.tar.bz2« werden ignoriert
PATH="/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/bin:/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5/mips-unknown-linux-gnu/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" \
		make -j2  -C /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial \
		all-gcc \
		all-target-libgcc
make[1]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/intl'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/intl'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libiberty'
make[3]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libiberty/testsuite'
make[3]: Für das Ziel »all« ist nichts zu tun.
make[3]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libiberty/testsuite'
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libiberty'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/libiberty'
make[3]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/libiberty/testsuite'
make[3]: Für das Ziel »all« ist nichts zu tun.
make[3]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/libiberty/testsuite'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libdecnumber'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libdecnumber'
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/libiberty'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/fixincludes'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/fixincludes'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/fixincludes'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/fixincludes'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libcpp'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libcpp'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/gcc'
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/gcc'
Checking multilib configuration for libgcc...
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/mips-linux-uclibc/libgcc'
# If this is the top-level multilib, build all the other
/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/./gcc/xgcc -B/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/./gcc/ -B/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/bin/ -B/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/lib/ -isystem /home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/include -isystem /home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/sys-include -g -Os -O2  -g -Os -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE  -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wcast-qual -Wold-style-definition  -isystem ./include  -fPIC -msoft-float -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED   -I. -I. -I../.././gcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/. -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../include   -o _muldi3.o -MT _muldi3.o -MD -MP -MF _muldi3.dep -DL_muldi3 -c /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/libgcc2.c \
	  
# multilibs.
/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/./gcc/xgcc -B/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/./gcc/ -B/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/bin/ -B/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/lib/ -isystem /home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/include -isystem /home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/sys-include -g -Os -O2  -g -Os -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE  -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wcast-qual -Wold-style-definition  -isystem ./include  -fPIC -msoft-float -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED   -I. -I. -I../.././gcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/. -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../include   -o _negdi2.o -MT _negdi2.o -MD -MP -MF _negdi2.dep -DL_negdi2 -c /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/libgcc2.c \
	  
In file included from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/bits/errno.h:25,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/errno.h:36,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/tsystem.h:93,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/libgcc2.c:29:
/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/linux/errno.h:4:23: error: asm/errno.h: No such file or directory
In file included from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/bits/errno.h:25,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/errno.h:36,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/tsystem.h:93,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/libgcc2.c:29:
/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/linux/errno.h:4:23: error: asm/errno.h: No such file or directory
make[2]: *** [_muldi3.o] Fehler 1
make[2]: *** Warte auf noch nicht beendete Prozesse...
make[2]: *** [_negdi2.o] Fehler 1
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/mips-linux-uclibc/libgcc'
make[1]: *** [all-target-libgcc] Fehler 2
make[1]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial'
make: *** [/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/.compiled] Fehler 2
Habe eigentlich eine 7270 in Betrieb und würde mich deshalb gerne anbieten, die 7320 zu Testzwecken zu nutzen, damit andere sie mit freetz nutzen können.

Gruß
caz
 
Hi caz,
hier gibts ein Patch, der das Problem beheben sollte.

Gruß
Oliver
 
Bei mir kommt auch die Fehlermeldung.
ist bekannt wann die Stabile Version kommt!

mfg Patrick:confused:
 
Nein. Aufgrund der freien Zeiteinteilung der Devs existiert leider kein Zeitplan für Releases. Vielleicht in 4 Wochen. Vielleicht in einem Jahr....

Gruß
Oliver
 
Hallo und Danke für die schnelle Antwort. Hatte zwar noch keinen wirklichen Erfolg, aber zumindest sieht es schonmal anders aus.

Code: 
patch -p0 < kernel_headers.patch 
patching file toolchain/make/target/uclibc/uclibc.mk
patching file make/linux/Makefile.in
patching file make/linux/kernel.mk

Code: 
make
toolchain/make/target/gcc/gcc.mk:85: Warnung: Die Befehle für das Ziel »dl/gcc-4.4.5.tar.bz2« werden überschrieben
toolchain/make/kernel/gcc/gcc.mk:53: Warnung: Alte Befehle für das Ziel »dl/gcc-4.4.5.tar.bz2« werden ignoriert
cmd() { PATH="/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/bin:/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5/mips-unknown-linux-gnu/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" LD_RUN_PATH="/usr/lib/freetz" make -j2  "$@"  || { printf "\n\\033[33m%s\\033[m\n" "ERROR: Build failed.";  exit 1; } }; 	if [ -e source/.echo_item_start -a ! -e source/.echo_item_build ]; then echo -n "building... "; touch source/.echo_item_build; fi; cmd -C source/kernel/ref-ar9-16mb_26-7320_04.86/linux-2.6.28 \
		CROSS_COMPILE="mips-unknown-linux-gnu-" \
		ARCH=mips \
		INSTALL_HDR_PATH=/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/linux-dev \
		headers_install
make[1]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/kernel/ref-ar9-16mb_26-7320_04.86/linux-2.6.28'
Makefile:208: use: CROSS_COMPILE=mips-unknown-linux-gnu-
  CHK     include/linux/version.h
  HOSTCC  scripts/unifdef
  INSTALL include/asm-generic (12 files)
  INSTALL include/drm (11 files)
  INSTALL include/linux/byteorder (4 files)
  INSTALL include/mtd (6 files)
  INSTALL include/linux/can (3 files)
  INSTALL include/rdma (1 file)
  INSTALL include/linux/dvb (8 files)
  INSTALL include/sound (9 files)
  INSTALL include/linux/hdlc (1 file)
  INSTALL include/linux/isdn (1 file)
  INSTALL include/linux/netfilter (49 files)
  INSTALL include/video (3 files)
  INSTALL include (0 file)
  INSTALL include/linux/netfilter_arp (2 files)
  INSTALL include/linux/netfilter_bridge (16 files)
  INSTALL include/linux/netfilter_ipv4 (46 files)
  INSTALL include/linux/netfilter_ipv6 (20 files)
  INSTALL include/linux/nfsd (6 files)
  INSTALL include/linux/raid (2 files)
  INSTALL include/linux/spi (1 file)
  INSTALL include/linux/sunrpc (1 file)
  INSTALL include/linux/tc_act (6 files)
  INSTALL include/linux/tc_ematch (4 files)
  INSTALL include/linux/usb (8 files)
  INSTALL include/linux (350 files)
  INSTALL include/asm (31 files)
make[1]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/kernel/ref-ar9-16mb_26-7320_04.86/linux-2.6.28'
touch source/kernel/ref-ar9-16mb_26-7320_04.86/.headers_installed
cmd() { PATH="/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/bin:/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5/mips-unknown-linux-gnu/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" LD_RUN_PATH="/usr/lib/freetz" make -j2  "$@"  || { printf "\n\\033[33m%s\\033[m\n" "ERROR: Build failed.";  exit 1; } }; 	if [ -e source/.echo_item_start -a ! -e source/.echo_item_build ]; then echo -n "building... "; touch source/.echo_item_build; fi; cmd -C source/kernel/ref-ar9-16mb_26-7320_04.86/linux-2.6.28 \
		CROSS_COMPILE="mips-unknown-linux-gnu-" \
		KERNEL_MAKE_PATH="/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5/mips-unknown-linux-gnu/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" \
		ARCH="mips" \
		KERNEL_LAYOUT="16mb_26" \
		prepare
make[1]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/kernel/ref-ar9-16mb_26-7320_04.86/linux-2.6.28'
Makefile:208: use: CROSS_COMPILE=mips-unknown-linux-gnu-
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-mips
  CALL    scripts/checksyscalls.sh
<stdin>:1549:2: warning: #warning syscall shmget not implemented
<stdin>:1553:2: warning: #warning syscall shmat not implemented
<stdin>:1557:2: warning: #warning syscall shmctl not implemented
<stdin>:1685:2: warning: #warning syscall semget not implemented
<stdin>:1689:2: warning: #warning syscall semop not implemented
<stdin>:1693:2: warning: #warning syscall semctl not implemented
<stdin>:1697:2: warning: #warning syscall shmdt not implemented
<stdin>:1701:2: warning: #warning syscall msgget not implemented
<stdin>:1705:2: warning: #warning syscall msgsnd not implemented
<stdin>:1709:2: warning: #warning syscall msgrcv not implemented
<stdin>:1713:2: warning: #warning syscall msgctl not implemented
<stdin>:2145:2: warning: #warning syscall reserved177 not implemented
<stdin>:2209:2: warning: #warning syscall reserved193 not implemented
<stdin>:2293:2: warning: #warning syscall semtimedop not implemented
<stdin>:2441:2: warning: #warning syscall newfstatat not implemented
<stdin>:2717:2: warning: #warning syscall shmget not implemented
<stdin>:2721:2: warning: #warning syscall shmat not implemented
<stdin>:2725:2: warning: #warning syscall shmctl not implemented
<stdin>:2853:2: warning: #warning syscall semget not implemented
<stdin>:2857:2: warning: #warning syscall semop not implemented
<stdin>:2861:2: warning: #warning syscall semctl not implemented
<stdin>:2865:2: warning: #warning syscall shmdt not implemented
<stdin>:2869:2: warning: #warning syscall msgget not implemented
<stdin>:2873:2: warning: #warning syscall msgsnd not implemented
<stdin>:2877:2: warning: #warning syscall msgrcv not implemented
<stdin>:2881:2: warning: #warning syscall msgctl not implemented
<stdin>:3313:2: warning: #warning syscall reserved177 not implemented
<stdin>:3377:2: warning: #warning syscall reserved193 not implemented
<stdin>:3465:2: warning: #warning syscall semtimedop not implemented
<stdin>:3625:2: warning: #warning syscall newfstatat not implemented
make[1]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/kernel/ref-ar9-16mb_26-7320_04.86/linux-2.6.28'
touch source/kernel/ref-ar9-16mb_26-7320_04.86/.depend_done
PATH="/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/bin:/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5/mips-unknown-linux-gnu/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" \
		make -j2  -C /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial \
		all-gcc \
		all-target-libgcc
make[1]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/intl'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/intl'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libiberty'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/libiberty'
make[3]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libiberty/testsuite'
make[3]: Für das Ziel »all« ist nichts zu tun.
make[3]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libiberty/testsuite'
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libiberty'
make[3]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/libiberty/testsuite'
make[3]: Für das Ziel »all« ist nichts zu tun.
make[3]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/libiberty/testsuite'
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/libiberty'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libdecnumber'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libdecnumber'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/fixincludes'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/fixincludes'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/fixincludes'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/build-x86_64-pc-linux-gnu/fixincludes'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libcpp'
make[2]: Für das Ziel »all« ist nichts zu tun.
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/libcpp'
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/gcc'
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/gcc'
Checking multilib configuration for libgcc...
make[2]: Betrete Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/mips-linux-uclibc/libgcc'
# If this is the top-level multilib, build all the other
/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/./gcc/xgcc -B/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/./gcc/ -B/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/bin/ -B/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/lib/ -isystem /home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/include -isystem /home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/sys-include -g -Os -O2  -g -Os -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE  -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wcast-qual -Wold-style-definition  -isystem ./include  -fPIC -msoft-float -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED   -I. -I. -I../.././gcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/. -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../include   -o _muldi3.o -MT _muldi3.o -MD -MP -MF _muldi3.dep -DL_muldi3 -c /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/libgcc2.c \
	  
# multilibs.
/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/./gcc/xgcc -B/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/./gcc/ -B/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/bin/ -B/home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/lib/ -isystem /home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/include -isystem /home/caz/freetz-branch-7390/toolchain/build/mips_gcc-4.4.5_uClibc-0.9.30.3/mips-linux-uclibc/usr/mips-linux-uclibc/sys-include -g -Os -O2  -g -Os -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE  -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wcast-qual -Wold-style-definition  -isystem ./include  -fPIC -msoft-float -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED   -I. -I. -I../.././gcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/. -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc -I/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../include   -o _negdi2.o -MT _negdi2.o -MD -MP -MF _negdi2.dep -DL_negdi2 -c /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/libgcc2.c \
	  
In file included from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/bits/errno.h:25In file included from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/bits/errno.h:25,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/errno.h:36,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/errno.h:36,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/tsystem.h:93,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/tsystem.h:93,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/libgcc2.c:29,
                 from /home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5/libgcc/../gcc/libgcc2.c:29:
:
/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/linux/errno.h:4:23:/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc_dev//usr/include/linux/errno.h:4:23:  error: error: asm/errno.h: No such file or directoryasm/errno.h: No such file or directory

make[2]: *** [_negdi2.o] Fehler 1
make[2]: *** Warte auf noch nicht beendete Prozesse...
make[2]: *** [_muldi3.o] Fehler 1
make[2]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/mips-linux-uclibc/libgcc'
make[1]: *** [all-target-libgcc] Fehler 2
make[1]: Verlasse Verzeichnis '/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial'
make: *** [/home/caz/freetz-branch-7390/source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/gcc-4.4.5-initial/.compiled] Fehler 2
Falls ich einen Fehler gemacht habe, bitte aufklären

Gruß
caz
 
Die Header fehlen wohl immer noch irgendwo. Probier mal:
Code: 
$ rm -rf source/toolchain-mips_gcc-4.4.5_uClibc-0.9.30.3/uClibc-0.9.30.3
$ make
Gruß
Oliver
 
Hallo,

so hat es funktioniert, Image wurde erstellt. Die Box startet nach dem Firmware-Upgrade und auch das freetz-Menü ist aufrufbar. Unter Box-Info kommt allerdings keine Ausgabe.

Ein zweites Image mit callmonitor und nano funktionierte ebenfalls.

Nun habe ich versucht, Informationen aus der Box zu bekommen, aber Telnetzugriff ist nicht möglich. Der Dienst startet zwar und fordert auch zur Eingabe der Login-Daten auf, aber sagt immerzu "Login incorrect". Habe sowohl im AVM-Menü als auch in freetz erstmal das Passwort "123456" genommen, aber mit root und 123456 lässt er mich nicht rein.

Gibt es Vorschläge, wie ich nützliche Informationen aus der Kombination freetz/7320 zur Verfügung stellen kann?

Gruß
caz
 
Die Kombi ist "root/freetz". Steht in der FAQ (hoffentlich).

boxinfo:
Code: 
flash_size=$(($(sed -ne "s/^flashsize.\([0-9x].*\)/\1/p" /proc/sys/urlader/environment) / 0x100000))
Code: 
# cat /proc/sys/urlader/environment |grep flashsize
flashsize       nor_size=16MB
Kann jemand bitte die sed Anweisung um die Angabe der 7320 erweitern? Oder sollen wir CONFIG_ROMSIZE für die 7320 nutzen?

Gruß
Oliver

edit: /proc/clocks für die Taktfrequenzen gibt es auch nicht mehr.
 
Zuletzt bearbeitet:
So habe ein Recovery durchgeführt und dann nochmal ein neues freetz aufgespielt, aber per Telnet (gestartet) ist kein Zugriff möglich.

Hab dann ein Image mit Security Level 0 gemacht, um zumindest die Rudi-Shell zu haben, da hab ich dann
Code: 
(echo neu123; sleep 2; echo neu123) | passwd
eingegeben und bekam auch ein "Password for root changed by root", doch Telnet sagt auch danach "Login incorrect".

Hier habe ich zumindest mal die Ausgabe von dmesg aus der Rudi-Shell. Falls ich noch etwas testen soll oder Angaben interessant wären, lasst es mich wissen.

Code: 
Linux version 2.6.28.10 (hjortmann@EmbeddedVM) (gcc version 4.4.2 (GCC) ) #17 Fri Sep 10 16:12:07 CEST 2010

phym = 04000000, mem = 04000000, max_pfn = 00004000

Reserving memory for CP1 @0xa4000000, size 0x00000000

CPU revision is: 0001954c (MIPS 34Kc)

Determined physical RAM map:

 memory: 04000000 @ 00000000 (usable)

nid=0 start=0 map=4b0 end=4000 mapsize=800 mode_bootmen_map=804b0000

Initrd not found or empty - disabling initrd

Zone PFN ranges:

  Normal   0x00000000 -> 0x00004000

Movable zone start PFN for each node

early_node_map[1] active PFN ranges

    0: 0x00000000 -> 0x00004000

On node 0 totalpages: 16384

free_area_init_node: node 0, pgdat 803fa0c0, node_mem_map 81000000

  Normal zone: 128 pages used for memmap

  Normal zone: 0 pages reserved

  Normal zone: 16256 pages, LIFO batch:3

  Movable zone: 0 pages used for memmap

[c55] c55_mem_start = 0xfc0000

entering build_all_zonelists()

return from set_zonelist_order()

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256

Kernel command line: console=ttyS1,115200n8r nor_size=16MB ethaddr=BC:05:43:5C:52:A1 

[0:parse_mtd_size/683] '16MB'

[0:mtdnor_setup/881] nor_size = 0x1000000

[0:mtdnor_setup/888] mtd2 = 0x90000000,0x90020000

[0:mtdnor_setup/916] mtd1 = 0x90020000,0x90F80000

[0:mtdnor_setup/928] mtd3 = 0x90F80000,0x90FC0000

[0:mtdnor_setup/940] mtd4 = 0x90FC0000,0x91000000

mac address bc- 5-43-5c-52-a1 

[trap_init] cpu_has_vint

[trap_init] cpu_has_ejtag 

[trap_init] cpu_has_watch

[trap_init] cpu_has_divec

[trap_init] cpu_has_mcheck

[trap_init] cpu_has_mipsmt

[trap_init] cpu_has_4kex

Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.

Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes

Writing ErrCtl register=00030098

Readback ErrCtl register=00030098

PID hash table entries: 256 (order: 8, 1024 bytes)

Console: colour dummy device 80x25

console [ttyS1] enabled

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 59924k/65536k available (3085k kernel code, 5536k reserved, 984k data, 180k init, 0k highmem)

Calibrating delay loop... 261.32 BogoMIPS (lpj=1306624)

Security Framework initialized

Mount-cache hash table entries: 512

kernel_init: started

kernel_init: kernel locked

net_namespace: 636 bytes

NET: Registered protocol family 16

Lantiq PCI host controller driver, version 1.1.5, (c) 2001-2010 Lantiq Deutschland GmbH

pci 0000:00:00.0: supports D1 D2

pci 0000:00:00.0: PME# supported from D1 D2

pci 0000:00:00.0: PME# disabled

pci 0000:00:0e.0: reg 10 32bit mmio: [0x000000-0x00ffff]

NET: Registered protocol family 8

NET: Registered protocol family 20

NET: Registered protocol family 2





Switched to high resolution mode on CPU 0



IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

NET: Registered protocol family 1

gptu: totally 6 16-bit timers/counters

gptu: misc_register on minor 63

gptu: succeeded to request irq 120

gptu: succeeded to request irq 121

gptu: succeeded to request irq 122

gptu: succeeded to request irq 123

gptu: succeeded to request irq 124

gptu: succeeded to request irq 125

Lantiq CGU driver, version 1.0.9, (c) 2001-2010 Lantiq Deutschland GmbH

config3 0x424 MT 1

MVPControl 0x2, STLB 0 VPC 1 EVP 0

mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1

smvp_tc_init: tc 0 tcbind 00020000 tcstatus 18102000

smvp_tc_init: tc 1 tcbind 00200001 tcstatus 00000400

smvp_tc_init: tc 2 tcbind 00400001 tcstatus 00000400

smvp_tc_init: tc 3 tcbind 00600001 tcstatus 00000400

config3 0x424 MT 1

MVPControl 0x2, STLB 0 VPC 1 EVP 0

mvpconf0 0xb8008403, PVPE 1 PTC 3 M 1

initcall vpe_module_init+0x0/0x544 returned with disabled interrupts 

audit: initializing netlink socket (disabled)

type=2000 audit(0.514:1): initialized

[simple_profiling] 0 entries 50 min

squashfs: version 3.4 (2008/08/26) Phillip Lougher

JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

fuse init (API version 7.10)

yaffs Sep 10 2010 16:11:32 Installing. 

msgmni has been set to 117

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

io scheduler noop registered (default)

avm_net_trace: Up and running.

[avm] configured: watchdog event debug 



AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0, build: Sep 10 2010 16:11:07)

[simple-profiling]: 4 performance counters implemented

Enable Performance Counter 0 for Data cache accesses (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable)

[simple-profiling]: 4 performance counters implemented

Enable Performance Counter 1 for Data cache misses (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable)

[avm]: AVM Simple Profiling enabled.

LANTIQ PMCU Device Driver Version 0.9.1

ifx_pmu_init: Major 244

Lantiq PMU driver, version 1.0.5, (c) 2001-2010 Lantiq Deutschland GmbH

Lantiq GPIO driver, version 1.2.12, (c) 2001-2010 Lantiq Deutschland GmbH

Infineon Technologies RCU driver version 1.0.6 

Serial: SERIAL_AVM_ASC driver

ttyS0 at MMIO 0xbe100400 (irq = 100) is a IFX_ASC

ttyS1 at MMIO 0xbe100c00 (irq = 107) is a IFX_ASC

loop: module loaded

nbd: registered device at major 43

[cpmac] Version: 1.108.1.32.1.3 - Revision 811:1122 - Fr 10.09.2010 16:11:49 

tun: Universal TUN/TAP device driver, 1.6

tun: (C) 1999-2004 Max Krasnyansky <[email protected]>

IFX SWITCH API, Version 0.8.7.7

SWAPI: Registered character device [switch_api] with major no [81]

 External Switch ID :0x0000ffff

no external Switch

[tantos_reset_ext_gphy] 34

[tantos_reset_ext_gphy] 36

eth0 up

IFX 3 Port Switch Eth driver, version ifxmips_3port_sw.c:v1.0.4 

,(c)2009 Infineon Technologies AG

Lantiq ATM driver, version 1.0.15, (c) 2001-2010 Lantiq Deutschland GmbH

    ATM (A1) firmware version 0.1

ifxmips_atm: ATM init succeed

Generic platform RAM MTD, (c) 2004 Simtec Electronics

Platform NOR MTD, (c) AVM 2010

[plat_nor_probe]start probe

mtd-nor: Found 1 x16 devices at 0x0 in 16-bit bank

 Amd/Fujitsu Extended Query Table at 0x0040

mtd-nor: CFI does not contain boot bank location. Assuming top.

number of CFI chips: 1

cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

[parse_mtd_partitions] types=find_jffs2

[ifx_jffs2_parser_function] mtd_info->name mtd-nor mtd_info->index 0 param=0 p_mtd_pat=0x839eda50

[ifx_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)

[ifx_jffs2_parser_function] magic 19852003 found @pos 0xe80000, size 1048576

[parse_mtd_partitions] types=find_squashfs

[ifx_squashfs_parser_function] mtd_info->name mtd-nor mtd_info->index 0 param=0 p_mtd_pat=0x839eda50

[ifx_squashfs_parser_function] magic found @pos 0x17cb00

[ifx_squashfs_parser_function] jffs2_start@e80000 size: 16

6 find_squashfs partitions found on MTD device mtd-nor

Creating 6 MTD partitions on "mtd-nor":

0x0017cb00-0x00e80000 : "rootfs" (master-size:16777216)

mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only

[0:ifx_mtd_add_notifier/606] name rootfs

[0:ifx_mtd_add_notifier/610] found rootfs

[0:ifx_mtd_add_notifier/617] use rootfs

[0:ifx_mtd_add_notifier/621] root device: /dev/mtdblock0 (rootfs)

0x00020000-0x0017cb00 : "kernel" (master-size:16777216)

mtd: partition "kernel" doesn't end on an erase block -- force read-only

[0:ifx_mtd_add_notifier/606] name kernel

[0:ifx_mtd_add_notifier/650] skip kernel

0x00000000-0x00020000 : "urlader" (master-size:16777216)

[0:ifx_mtd_add_notifier/606] name urlader

[0:ifx_mtd_add_notifier/631] set ifx_urlader_mtd

0x00f80000-0x00fc0000 : "tffs (1)" (master-size:16777216)

[0:ifx_mtd_add_notifier/606] name tffs (1)

[0:ifx_mtd_add_notifier/639] tffs (1) on Index 3

0x00fc0000-0x01000000 : "tffs (2)" (master-size:16777216)

[0:ifx_mtd_add_notifier/606] name tffs (2)

[0:ifx_mtd_add_notifier/646] tffs (2) on Index 4

0x00e80000-0x00f80000 : "jffs2" (master-size:16777216)

[0:ifx_mtd_add_notifier/606] name jffs2

[0:ifx_mtd_add_notifier/650] skip jffs2

[0:ifx_mtd_add_notifier/606] name mtd-nor

[0:ifx_mtd_add_notifier/650] skip mtd-nor

mtd-nor mtd-nor: registered mtd device

Lantiq SSC driver, version 2.1.5, (c) 2001-2010 Lantiq Deutschland GmbH

Unknown SPI device: 0xFF 0xFF 0xFF

ifx_spi_flash_init: Found no serial flash device

mice: PS/2 mouse device common for all mice

i2c /dev entries driver

CAPI Subsystem Rev 1.1.2.8

IFX MEI Version 5.00.04<6>oprofile: using mips/34K performance monitoring.

IPv4 over IPv4 tunneling driver

TCP cubic registered

mcfw: IGMPv3 fast forwarding

NET: Registered protocol family 10

IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

Bridge firewalling registered

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

Initializing koam module

TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)

      mount on mtd3 and mtd4 (double buffering)

Adam2 environment variables API installed.

kernel_init: basic setup done

[squashfs] use lzma compression 

VFS: Mounted root (squashfs filesystem) readonly.

Freeing unused kernel memory: 3fc000: 180k freed

[uart_avm_set_termios] baudrate=115200, quot=107, fdv=24, reload=4, b=114840

trying /sbin/init

TFFS Name Table H

led_modul_Fritz_Box_7320: module license '

(C) Copyright 2008 by AVM

' taints kernel.

[led_gpio_bit_driver_init] gpio 44 name power

[led_gpio_bit_driver_init] gpio 47 name internet

[led_gpio_bit_driver_init] gpio 38 name dect

[led_gpio_bit_driver_init] gpio 37 name wlan

[led_gpio_bit_driver_init] gpio 35 name dual1

[led_gpio_bit_driver_init] gpio 45 name dual2

[button_init] name button_wlan, gpio 1 active_low

[button_init] name button_dect, gpio 2 active_low

rtc-avm rtc-avm.0: rtc core: registered avm as rtc0

[avm-rtc]: avm_rtc_probe: register: ret=0x83004c00

[avm-rtc]: avm_rtc_probe: success

[piglet]use gpio-settings for 172

patch_dectfw: c0bc6000, totallen = 42906(a79a)

patch_dectfw: patch_adress: 3dac max_len: 26 with Version 2 Len: 17

dect_loader: slow-bootmode

>*

***********************************************************************************

dect144xx_file_process: upload of '/lib/modules/dectfw_secondlevel_441.hex' successfull

[piglet]TDM: FS: 8035 Hz CLK: 1027930 Hz

[pcmlink]svn: 1239

[VPELink_PreInit] vpe-base 0xfc0000, maxsize: 131072

driver params overwritten io_addr=0x0 irq_num=0

[pcmlink]chrony-support

VPE loader: loading to 84000000 (fix at start-addr) len = 2097152

 elf loaded

vpe_run: tc 1 start-addr 80fc0000

vpe_run: tc 1 tcstatus 18000400 tcbind 00200001

 MVPCONTROL 00000002 vpeopt 00000000

capicodec_init()

[capi_codec] support fax

[capi_codec] support Codecs

dect_uicp_from_dect, ignore 15 bytes, dect_manager not up: 10000B00000F2F7B

ramzswap: /dev/ramzswap0 initialized: disksize_kb=16384<6>ramzswap: Device already initialized!

Adding 16376k swap on /dev/ramzswap0.  Priority:-1 extents:1 across:16376k

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

IFXUSB: ifxusb_hcd: version 3.0alpha B100312

IFXUSB: USB core #0 soft-reset

IFXUSB: USB core #0 soft-reset

ifxusb_hcd ifxusb_hcd: IFX USB Controller

ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1

ifxusb_hcd ifxusb_hcd: irq 56, io mem 0xbe101000

IFXUSB: Init: Power Port (0)

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

IFXUSB: USB core #1 soft-reset

IFXUSB: USB core #1 soft-reset

ifxusb_hcd ifxusb_hcd: IFX USB Controller

ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 2

ifxusb_hcd ifxusb_hcd: irq 85, io mem 0xbe106000

IFXUSB: Init: Power Port (0)

usb usb2: configuration #1 chosen from 1 choice

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

IFXHCD#1: AVM Powermeter changed to 0 mA

dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

IFXHCD#2: AVM Powermeter changed to 0 mA





Infineon CPE API Driver version: DSL CPE API V3.20.5.1

dynamically registered major number 237 for dsl_ar9

DSL_DRV: using proc fs

Modem is not ready!DSL[00]: Line state has changed: 00000000 -> 000000FF

kdsldmod: init start (Sep  3 2010 14:04:51) sizeof(struct sk_buff)=192

kdsldmod: init done

dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

eth: port 0 status 2 throttle 0

eth: port 1 status 1 throttle 1

[cpmac] [adm_power_config] tried to set a mode 1 that is not possible for this port 1.

[avm_power] : ethernet switch failed

eth: port 2 status 1 throttle 1

[cpmac] [adm_power_config] tried to set a mode 1 that is not possible for this port 2.

[avm_power] : ethernet switch failed

eth: port 3 status 1 throttle 1

[cpmac] [adm_power_config] tried to set a mode 1 that is not possible for this port 3.

[avm_power] : ethernet switch failed

[wlan_eeprom] calibration data blocks found = 1

[wlan_eeprom] Got calibration data version 255 for instance #1

[wlan_eeprom] Using complete eeprom from flash

wlanfw: Init.

ath_hal: 0.9.14.25 (AR5416, DEBUG, REGOPS_FUNC)

ath_dfs: Version 2.0.0

Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

DSL[00]: Line state has changed: 00000100 -> 00000200

wlan: 0.8.4.2 (Atheros/multi-bss)

Registered for AVM event source.

dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

device eth0 entered promiscuous mode

lan: topology change detected, propagating

lan: port 1(eth0) entering forwarding state

dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

ath_rate_atheros: Version 2.0.1

Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved

ath_spectral: Version 2.0.0

Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

ath_pci: 0.9.4.5 (Atheros/multi-bss)

ath_pci: CR-LSDK-1.3.1.146

cache line size: 16

Chan  Freq  RegPwr  HT   CTL CTL_U CTL_L DFS

   1  2412n     20  HT20  1    0    1     N

   2  2417n     20  HT20  1    0    1     N

   3  2422n     20  HT40  1    0    1     N

   4  2427n     20  HT40  1    0    1     N

   5  2432n     20  HT40  1    1    1     N

   6  2437n     20  HT40  1    1    1     N

   7  2442n     20  HT40  1    1    1     N

   8  2447n     20  HT40  1    1    1     N

   9  2452n     20  HT40  1    1    1     N

  10  2457n     20  HT40  1    1    0     N

  11  2462n     20  HT40  1    1    0     N

  12  2467n     20  HT20  1    1    0     N

  13  2472n     20  HT20  1    1    0     N

dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0

DFS min filter rssiThresh = 21

DFS max pulse dur = 131 ticks

wifi%d: spectral scan functionality not supported

wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps

wifi0: 11ng MCS:  0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15

wifi0: mac 384.2 phy 15.15 radio 12.0

wifi0: Use hw queue 1 for WME_AC_BE traffic

wifi0: Use hw queue 0 for WME_AC_BK traffic

wifi0: Use hw queue 2 for WME_AC_VI traffic

wifi0: Use hw queue 3 for WME_AC_VO traffic

wifi0: Use hw queue 8 for CAB traffic

wifi0: Use hw queue 9 for beacons

wifi0: Use hw queue 7 for UAPSD

avm_net_trace: New net trace device 'HW (2.4 + 5 GHz, wifi0)' registered with minor 128.

wifi0: Atheros 5416 PCI: mem=0x18000000, irq=24 hw_base=0xb8000000

wlan: mac acl policy registered

avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 130.

avm_net_trace: New net trace device 'AP (2.4 + 5 GHz, ath0)' registered with minor 131.

dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

device ath0 entered promiscuous mode

lan: topology change detected, propagating

lan: port 2(ath0) entering forwarding state

[capi_oslib] capi_installed

[capi_oslib] capi_installed

dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

userman: LAN Client Internet-Accounting and Blocking

userman: device registerd with major=228

userman: init ok

AVM_WATCHDOG: System Init UEberwachung abgeschlossen (231470 ms noch verfuegbar)

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=974 NormP=974 mW -> SumNormP=974 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=3417 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=28 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=4357 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=100 act_rate=0 mul=141 div=10 offset=100 NormP=1510 mW -> SumNormP=5867 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=200 div=78 offset=150 NormP=406 mW -> SumNormP=6273 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=16777426 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=6790 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=6790 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=0 mul=55 div=10 offset=50 NormP=2800 mW -> SumNormP=9590 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=9590 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=9590 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=88 mul=15 div=1 offset=0 NormP=1500 mW -> SumNormP=11090 mW

[avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host2: norm_power_rate=100 act_rate=0 mul=55 div=10 offset=50 NormP=600 mW -> SumNormP=11690 mW

SysRq : Changing Loglevel

Loglevel set to 4

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

/proc/tffs: info request: success

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

/proc/tffs: info request: success

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

DSL[00]: Reboot on training timeout (60)!!!

DSL[00]: Line state has changed: 00000200 -> 00000000

DSL[00]: Line state has changed: 00000000 -> 000000FF

DSL[00]: Line state has changed: 000000FF -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000100

DSL[00]: Line state has changed: 00000100 -> 00000200

Gruß
caz
 
Ich hab heute morgen auch mal meine 7320 gefreetz

und bei mir nimmt er das pass für das Telnet auch nicht

aber Transmission geht :)
 
Wie siehts denn mit Syslog Ausschnitten aus?

Gruß
Oliver
 
Hallo,

Syslog sieht wie folgt aus:
Code: 
Jan  1 01:00:59 fritz user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040

Jan  1 01:00:59 fritz user.warn kernel: mtd-nor: CFI does not contain boot bank location. Assuming top.

Jan  1 01:00:59 fritz user.notice kernel: number of CFI chips: 1

Jan  1 01:00:59 fritz user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

Jan  1 01:00:59 fritz user.warn kernel: [parse_mtd_partitions] types=find_jffs2

Jan  1 01:00:59 fritz user.warn kernel: [ifx_jffs2_parser_function] mtd_info->name mtd-nor mtd_info->index 0 param=0 p_mtd_pat=0x839eda50

Jan  1 01:00:59 fritz user.warn kernel: [ifx_jffs2_parser_function] try partition kernel (offset 0x20000 len 16121856)

Jan  1 01:00:59 fritz user.warn kernel: [ifx_jffs2_parser_function] magic 19852003 found @pos 0xe80000, size 1048576

Jan  1 01:00:59 fritz user.warn kernel: [parse_mtd_partitions] types=find_squashfs

Jan  1 01:00:59 fritz user.warn kernel: [ifx_squashfs_parser_function] mtd_info->name mtd-nor mtd_info->index 0 param=0 p_mtd_pat=0x839eda50

Jan  1 01:00:59 fritz user.warn kernel: [ifx_squashfs_parser_function] magic found @pos 0x17cb00

Jan  1 01:00:59 fritz user.warn kernel: [ifx_squashfs_parser_function] jffs2_start@e80000 size: 16

Jan  1 01:00:59 fritz user.notice kernel: 6 find_squashfs partitions found on MTD device mtd-nor

Jan  1 01:00:59 fritz user.notice kernel: Creating 6 MTD partitions on "mtd-nor":

Jan  1 01:00:59 fritz user.notice kernel: 0x0017cb00-0x00e80000 : "rootfs" (master-size:16777216)

Jan  1 01:00:59 fritz user.warn kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/606] name rootfs

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/610] found rootfs

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/617] use rootfs

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/621] root device: /dev/mtdblock0 (rootfs)

Jan  1 01:00:59 fritz user.notice kernel: 0x00020000-0x0017cb00 : "kernel" (master-size:16777216)

Jan  1 01:00:59 fritz user.warn kernel: mtd: partition "kernel" doesn't end on an erase block -- force read-only

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/606] name kernel

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/650] skip kernel

Jan  1 01:00:59 fritz user.notice kernel: 0x00000000-0x00020000 : "urlader" (master-size:16777216)

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/606] name urlader

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/631] set ifx_urlader_mtd

Jan  1 01:00:59 fritz user.notice kernel: 0x00f80000-0x00fc0000 : "tffs (1)" (master-size:16777216)

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/606] name tffs (1)

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/639] tffs (1) on Index 3

Jan  1 01:00:59 fritz user.notice kernel: 0x00fc0000-0x01000000 : "tffs (2)" (master-size:16777216)

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/606] name tffs (2)

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/646] tffs (2) on Index 4

Jan  1 01:00:59 fritz user.notice kernel: 0x00e80000-0x00f80000 : "jffs2" (master-size:16777216)

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/606] name jffs2

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/650] skip jffs2

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/606] name mtd-nor

Jan  1 01:00:59 fritz user.err kernel: [0:ifx_mtd_add_notifier/650] skip mtd-nor

Jan  1 01:00:59 fritz user.info kernel: mtd-nor mtd-nor: registered mtd device

Jan  1 01:00:59 fritz user.info kernel: Lantiq SSC driver, version 2.1.5, (c) 2001-2010 Lantiq Deutschland GmbH

Jan  1 01:00:59 fritz user.warn kernel: Unknown SPI device: 0xFF 0xFF 0xFF

Jan  1 01:00:59 fritz user.warn kernel: ifx_spi_flash_init: Found no serial flash device

Jan  1 01:00:59 fritz user.info kernel: mice: PS/2 mouse device common for all mice

Jan  1 01:00:59 fritz user.info kernel: i2c /dev entries driver

Jan  1 01:00:59 fritz user.notice kernel: CAPI Subsystem Rev 1.1.2.8

Jan  1 01:00:59 fritz user.warn kernel: IFX MEI Version 5.00.04<6>oprofile: using mips/34K performance monitoring.

Jan  1 01:00:59 fritz user.info kernel: IPv4 over IPv4 tunneling driver

Jan  1 01:00:59 fritz user.info kernel: TCP cubic registered

Jan  1 01:00:59 fritz user.info kernel: mcfw: IGMPv3 fast forwarding

Jan  1 01:00:59 fritz user.info kernel: NET: Registered protocol family 10

Jan  1 01:00:59 fritz user.info kernel: IPv6 over IPv4 tunneling driver

Jan  1 01:00:59 fritz user.info kernel: NET: Registered protocol family 17

Jan  1 01:00:59 fritz user.notice kernel: Bridge firewalling registered

Jan  1 01:00:59 fritz user.info kernel: RPC: Registered udp transport module.

Jan  1 01:00:59 fritz user.info kernel: RPC: Registered tcp transport module.

Jan  1 01:00:59 fritz user.warn kernel: Initializing koam module

Jan  1 01:00:59 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)

Jan  1 01:00:59 fritz user.warn kernel:       mount on mtd3 and mtd4 (double buffering)

Jan  1 01:00:59 fritz user.info kernel: Adam2 environment variables API installed.

Jan  1 01:00:59 fritz user.warn kernel: kernel_init: basic setup done

Jan  1 01:00:59 fritz user.warn kernel: [squashfs] use lzma compression 

Jan  1 01:00:59 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.

Jan  1 01:00:59 fritz user.info kernel: Freeing unused kernel memory: 3fc000: 180k freed

Jan  1 01:00:59 fritz user.warn kernel: [uart_avm_set_termios] baudrate=115200, quot=107, fdv=24, reload=4, b=114840

Jan  1 01:00:59 fritz user.warn kernel: trying /sbin/init

Jan  1 01:00:59 fritz user.warn kernel: TFFS Name Table H

Jan  1 01:00:59 fritz user.warn kernel: led_modul_Fritz_Box_7320: module license '

Jan  1 01:00:59 fritz user.warn kernel: (C) Copyright 2008 by AVM

Jan  1 01:00:59 fritz user.warn kernel: ' taints kernel.

Jan  1 01:00:59 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 44 name power

Jan  1 01:00:59 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 47 name internet

Jan  1 01:00:59 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 38 name dect

Jan  1 01:00:59 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 37 name wlan

Jan  1 01:00:59 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 35 name dual1

Jan  1 01:00:59 fritz user.warn kernel: [led_gpio_bit_driver_init] gpio 45 name dual2

Jan  1 01:00:59 fritz user.warn kernel: [button_init] name button_wlan, gpio 1 active_low

Jan  1 01:00:59 fritz user.warn kernel: [button_init] name button_dect, gpio 2 active_low

Jan  1 01:00:59 fritz user.info kernel: rtc-avm rtc-avm.0: rtc core: registered avm as rtc0

Jan  1 01:00:59 fritz user.err kernel: [avm-rtc]: avm_rtc_probe: register: ret=0x83004c00

Jan  1 01:00:59 fritz user.err kernel: [avm-rtc]: avm_rtc_probe: success

Jan  1 01:00:59 fritz user.warn kernel: [piglet]use gpio-settings for 172

Jan  1 01:00:59 fritz user.warn kernel: patch_dectfw: c0bc6000, totallen = 42906(a79a)

Jan  1 01:00:59 fritz user.warn kernel: patch_dectfw: patch_adress: 3dac max_len: 26 with Version 2 Len: 17

Jan  1 01:00:59 fritz user.warn kernel: dect_loader: slow-bootmode

Jan  1 01:00:59 fritz user.warn kernel: <FE>*

Jan  1 01:00:59 fritz user.warn kernel: ***********************************************************************************

Jan  1 01:00:59 fritz user.warn kernel: dect144xx_file_process: upload of '/lib/modules/dectfw_secondlevel_441.hex' successfull

Jan  1 01:00:59 fritz user.warn kernel: [piglet]TDM: FS: 8035 Hz CLK: 1027930 Hz

Jan  1 01:00:59 fritz user.warn kernel: [pcmlink]svn: 1239

Jan  1 01:00:59 fritz user.info kernel: ifxusb_hcd ifxusb_hcd: irq 85, io mem 0xbe106000

Jan  1 01:00:59 fritz user.info kernel: IFXUSB: Init: Power Port (0)

Jan  1 01:00:59 fritz user.info kernel: usb usb2: configuration #1 chosen from 1 choice

Jan  1 01:00:59 fritz user.info kernel: hub 2-0:1.0: USB hub found

Jan  1 01:00:59 fritz user.info kernel: hub 2-0:1.0: 1 port detected

Jan  1 01:00:59 fritz user.info kernel: IFXHCD#1: AVM Powermeter changed to 0 mA

Jan  1 01:00:59 fritz user.warn kernel: dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

Jan  1 01:00:59 fritz user.info kernel: IFXHCD#2: AVM Powermeter changed to 0 mA

Jan  1 01:00:59 fritz user.warn kernel: Infineon CPE API Driver version: DSL CPE API V3.20.5.1

Jan  1 01:00:59 fritz user.warn kernel: dynamically registered major number 237 for dsl_ar9

Jan  1 01:00:59 fritz user.warn kernel: DSL_DRV: using proc fs

Jan  1 01:00:59 fritz user.warn kernel: Modem is not ready!DSL[00]: Line state has changed: 00000000 -> 000000FF

Jan  1 01:00:59 fritz user.info kernel: kdsldmod: init start (Sep  3 2010 14:04:51) sizeof(struct sk_buff)=192

Jan  1 01:00:59 fritz user.info kernel: kdsldmod: init done

Jan  1 01:00:59 fritz user.warn kernel: dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

Jan  1 01:00:59 fritz user.warn kernel: DSL[00]: Line state has changed: 000000FF -> 00000100

Jan  1 01:00:59 fritz user.warn kernel: DSL[00]: Line state has changed: 00000100 -> 00000100

Jan  1 01:00:59 fritz user.warn kernel: eth: port 0 status 2 throttle 0

Jan  1 01:00:59 fritz user.warn kernel: eth: port 1 status 1 throttle 1

Jan  1 01:00:59 fritz user.err kernel: [cpmac] [adm_power_config] tried to set a mode 1 that is not possible for this port 1.

Jan  1 01:00:59 fritz user.err kernel: [avm_power] : ethernet switch failed

Jan  1 01:00:59 fritz user.warn kernel: eth: port 2 status 1 throttle 1

Jan  1 01:00:59 fritz user.err kernel: [cpmac] [adm_power_config] tried to set a mode 1 that is not possible for this port 2.

Jan  1 01:00:59 fritz user.err kernel: [avm_power] : ethernet switch failed

Jan  1 01:00:59 fritz user.warn kernel: eth: port 3 status 1 throttle 1

Jan  1 01:00:59 fritz user.err kernel: [cpmac] [adm_power_config] tried to set a mode 1 that is not possible for this port 3.

Jan  1 01:00:59 fritz user.err kernel: [avm_power] : ethernet switch failed

Jan  1 01:00:59 fritz user.info kernel: [wlan_eeprom] calibration data blocks found = 1

Jan  1 01:00:59 fritz user.info kernel: [wlan_eeprom] Got calibration data version 255 for instance #1

Jan  1 01:00:59 fritz user.info kernel: [wlan_eeprom] Using complete eeprom from flash

Jan  1 01:00:59 fritz user.info kernel: wlanfw: Init.

Jan  1 01:00:59 fritz user.info kernel: ath_hal: 0.9.14.25 (AR5416, DEBUG, REGOPS_FUNC)

Jan  1 01:00:59 fritz user.info kernel: ath_dfs: Version 2.0.0

Jan  1 01:00:59 fritz user.info kernel: Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

Jan  1 01:00:59 fritz user.warn kernel: DSL[00]: Line state has changed: 00000100 -> 00000200

Jan  1 01:00:59 fritz user.info kernel: wlan: 0.8.4.2 (Atheros/multi-bss)

Jan  1 01:00:59 fritz user.info kernel: Registered for AVM event source.

Jan  1 01:00:59 fritz user.warn kernel: dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

Jan  1 01:00:59 fritz user.info kernel: device eth0 entered promiscuous mode

Jan  1 01:00:59 fritz user.info kernel: lan: topology change detected, propagating

Jan  1 01:00:59 fritz user.info kernel: lan: port 1(eth0) entering forwarding state

Jan  1 01:00:59 fritz user.warn kernel: dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

Jan  1 01:00:59 fritz user.info kernel: ath_rate_atheros: Version 2.0.1

Jan  1 01:00:59 fritz user.info kernel: Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved

Jan  1 01:00:59 fritz user.info kernel: ath_spectral: Version 2.0.0

Jan  1 01:00:59 fritz user.info kernel: Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

Jan  1 01:00:59 fritz user.info kernel: ath_pci: 0.9.4.5 (Atheros/multi-bss)

Jan  1 01:00:59 fritz user.info kernel: ath_pci: CR-LSDK-1.3.1.146

Jan  1 01:00:59 fritz user.info kernel: device ath0 entered promiscuous mode

Jan  1 01:00:59 fritz user.info kernel: lan: topology change detected, propagating

Jan  1 01:00:59 fritz user.info kernel: lan: port 2(ath0) entering forwarding state

Jan  1 01:00:59 fritz user.err kernel: [capi_oslib] capi_installed

Jan  1 01:00:59 fritz user.err kernel: [capi_oslib] capi_installed

Jan  1 01:00:59 fritz user.warn kernel: dect_uicp_from_dect, ignore 23 bytes, dect_manager not up: 10001300000FF614

Jan  1 01:00:59 fritz user.info kernel: userman: LAN Client Internet-Accounting and Blocking

Jan  1 01:00:59 fritz user.warn kernel: userman: device registerd with major=228

Jan  1 01:00:59 fritz user.info kernel: userman: init ok

Jan  1 01:01:08 fritz user.warn kernel: AVM_WATCHDOG: System Init UEberwachung abgeschlossen (231020 ms noch verfuegbar)

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=974 NormP=974 mW -> SumNormP=974 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=100 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=3417 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=28 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=4357 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=100 act_rate=0 mul=141 div=10 offset=100 NormP=1510 mW -> SumNormP=5867 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=200 div=78 offset=150 NormP=406 mW -> SumNormP=6273 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=16777426 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=6790 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=100 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=6790 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=0 mul=55 div=10 offset=50 NormP=2800 mW -> SumNormP=9590 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=9590 mW

Jan  1 01:01:09 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=9590 mW

Jan  1 01:01:12 fritz user.err telefon[1427]: SIGCHILD killdectpid

Jan  1 01:01:27 fritz user.warn kernel: DSL[00]: Reboot on training timeout (60)!!!

Jan  1 01:01:27 fritz user.warn kernel: DSL[00]: Line state has changed: 00000200 -> 00000000

Jan  1 01:01:27 fritz user.warn kernel: DSL[00]: Line state has changed: 00000000 -> 000000FF

Jan  1 01:01:28 fritz user.warn kernel: DSL[00]: Line state has changed: 000000FF -> 00000100

Jan  1 01:01:30 fritz user.warn kernel: DSL[00]: Line state has changed: 00000100 -> 00000100

Jan  1 01:01:32 fritz user.warn kernel: DSL[00]: Line state has changed: 00000100 -> 00000200

Jan  1 01:02:12 fritz user.warn kernel: /proc/tffs: info request: success

Jan  1 01:02:31 fritz user.warn kernel: DSL[00]: Reboot on training timeout (60)!!!

Jan  1 01:02:31 fritz user.warn kernel: DSL[00]: Line state has changed: 00000200 -> 00000000

Jan  1 01:02:31 fritz user.warn kernel: DSL[00]: Line state has changed: 00000000 -> 000000FF

Jan  1 01:02:32 fritz user.warn kernel: DSL[00]: Line state has changed: 000000FF -> 00000100

Jan  1 01:02:33 fritz user.warn kernel: DSL[00]: Line state has changed: 00000100 -> 00000100

Jan  1 01:02:35 fritz user.warn kernel: DSL[00]: Line state has changed: 00000100 -> 00000200
Gruß
caz
 
Die dmesg Ausgaben hab ich oben schon gesehen. Ich hätte gerne die Syslog Ausgaben von den fehlgeschlagenen telnet logins?

Gruß
Oliver
 
Hallo,

wenn ich mich mit root und freetz per telnet verbinden möchte, erscheint im telnet-Fenster "Login incorrect", im Syslog steht dazu dann noch nichts.

Wenn ich es noch zwei weitere Male versuche, erscheint im telnet-Fenster nach dem "Login incorrect" dann "Verbindung zu Host verloren". Danach steht im Syslog folgendes
Code: 
fritz auth.warn login [2982]: invalid password for 'root' on 'pts/0'
 
Um antworten zu können musst du eingeloggt sein.

Zurzeit aktive Besucher

Gesamt: 565 (Mitglieder: 5, Gäste: 560)

Neueste Beiträge

Statistik des Forums

Themen
246,100
Beiträge
2,246,177
Mitglieder
373,583
Neuestes Mitglied
df3ei
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.
Ihr E-Mail-Adresse verifizieren

Ihr E-Mail-Adresse verifizieren

Wir haben Ihnen eine E-Mail geschickt. Klicken Sie auf die Schaltfläche im E-Mail-Text, um Ihre E-Mail-Adresse zu verifizieren – (Können Sie diese nicht finden können, dann überprüfen Sie Ihren Spam-Ordner).

IPPF im Überblick

Neueste Beiträge

Direktlinks Telefonanlage

Website-Sponsoren

3CX sponsor
KONTAKTIEREN SIE UNS BEI INTERESSE
| Style by ThemeHouse
XenPorta 2 PRO © Jason Axelrod of 8WAYRUN
Oben Unten
Zurück