Cisco 7960G configurieren --- Gelöst

<Default> 
<callManagerGroup> 
<members> 
<member priority="0"> 
<callManager> 
<ports> 
<ethernetPhonePort>2000</ethernetPhonePort> 
</ports> 
<processNodeName></processNodeName> 
</callManager> 
</member> 
</members> 
<loadInformation6 model="IP Phone 7910"></loadInformation6> 
<loadInformation124 model="Addon 7914"></loadInformation124> 
<loadInformation9 model="IP Phone 7935"></loadInformation9> 
<loadInformation8 model="IP Phone 7940"></loadInformation8> 
<loadInformation7 model="IP Phone 7960">P0S3-08-2-00</loadInformation7> 
<loadInformation20000 model="IP Phone 7905"></loadInformation20000> 
<loadInformation30008 model="IP Phone 7902"></loadInformation30008> 
<loadInformation30002 model="IP Phone 7920"></loadInformation30002> 
<loadInformation30019 model="IP Phone 7936"></loadInformation30019> 
<loadInformation30006 model="IP Phone 7970"></loadInformation30006> 
<loadInformation30018 model="IP Phone 7961"></loadInformation30018> 
<loadInformation30007 model="IP Phone 7912"></loadInformation30007> 
</callManagerGroup> 
</Default>

<device> 
<devicePool> 
<callManagerGroup> 
<members> 
<member priority="0"> 
<callManager> 
<ports> 
<ethernetPhonePort>2000</ethernetPhonePort> 
</ports> 
<processNodeName> </processNodeName> 
</callManager> 
</member> 
</members> 
</callManagerGroup> 
</devicePool> 
<versionStamp>{Jan 01 2005 00:00:00}</versionStamp> 
<loadInformation>P0S3-08-2-00</loadInformation> 
<userLocale> 
<name>English_United_States</name> 
<langCode>en</langCode> 
</userLocale> 
<networkLocale></networkLocale> 
<idleTimeout>0</idleTimeout> 
<authenticationURL></authenticationURL> 
<directoryURL></directoryURL> 
<idleURL></idleURL> 
<informationURL></informationURL> 
<messagesURL></messagesURL> 
<proxyServerURL></proxyServerURL> 
<servicesURL></servicesURL> 
</device>

# Image Version 
image_version: "P0S3-08-2-00" 
 
# Proxy Server 
proxy1_address: "pbx.mycompany.com" # IP address here alternatively 
 
# Proxy Server Port (default - 5060) 
proxy1_port:"5060" 
 
# Emergency Proxy info 
proxy_emergency: "pbx.mycompany.com" # IP address here alternatively 
proxy_emergency_port: "5060" 
 
# Backup Proxy info 
proxy_backup: "" 
proxy_backup_port: "5060" 
 
# Outbound Proxy info 
outbound_proxy: "" 
outbound_proxy_port: "5060" 
 
# NAT/Firewall Traversal 
nat_enable: "1" 
nat_address: "" 
voip_control_port: "5061" 
start_media_port: "16384" 
end_media_port: "32766" 
nat_received_processing: "0" 
 
# Proxy Registration (0-disable (default), 1-enable) 
proxy_register: "1" 
 
# Phone Registration Expiration [1-3932100 sec] (Default - 3600) 
timer_register_expires: "3600" 
 
# Codec for media stream (g711ulaw (default), g711alaw, g729) 
preferred_codec: "none" 
 
# TOS bits in media stream [0-5] (Default - 5) 
tos_media: "5" 
 
# Enable VAD (0-disable (default), 1-enable) 
enable_vad: "0" 
 
# Allow for the bridge on a 3way call to join remaining parties upon hangup 
cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default) 
 
# Allow Transfer to be completed while target phone is still ringing 
semi_attended_transfer: "0" ; 0-Disabled, 1-Enabled (default) 
 
# Telnet Level (enable or disable the ability to telnet into this phone 
telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged 
 
# Inband DTMF Settings (0-disable, 1-enable (default)) 
dtmf_inband: "1" 
 
# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt ) dtmf_outofband: "avt" ~np~# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up) 
dtmf_db_level: "3" 
 
# SIP Timers 
timer_t1: "500" ; Default 500 msec 
timer_t2: "4000" ; Default 4 sec 
sip_retx: "10" ; Default 11 
sip_invite_retx: "6" ; Default 7 
timer_invite_expires: "180" ; Default 180 sec 
 
# Setting for Message speeddial to UOne box 
messages_uri: "*97" 
 
# TFTP Phone Specific Configuration File Directory 
tftp_cfg_dir: "./" 
 
# Time Server 
sntp_mode: "unicast" 
sntp_server: "pbx.mycompany.com" # IP address here alternatively 
time_zone: "PST" 
dst_offset: "1" 
dst_start_month: "April" 
dst_start_day: "" 
dst_start_day_of_week: "Sun" 
dst_start_week_of_month: "1" 
dst_start_time: "02" 
dst_stop_month: "Oct" 
dst_stop_day: "" 
dst_stop_day_of_week: "Sunday" 
dst_stop_week_of_month: "8" 
dst_stop_time: "2" 
dst_auto_adjust: "1" 
 
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control) 
dnd_control: "0" ; Default 0 (Do Not Disturb feature is off) 
 
# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control) 
callerid_blocking: "0" ; Default 0 (Disable sending all calls as anonymous) 
 
# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control) 
anonymous_call_block: "0" ; Default 0 (Disable blocking of anonymous calls) 
 
# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control) 
call_waiting: "1" ; Default 1 (Call Waiting enabled) 
 
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) 
dtmf_avt_payload: "101" ; Default 100 
 
# XML file that specifies the dialplan desired 
dial_template: "dialplan" 
 
# Network Media Type (auto, full100, full10, half100, half10) 
network_media_type: "auto" 
 
#Autocompletion During Dial (0-off, 1-on [default]) 
autocomplete: "1" 
 
#Time Format (0-12hr, 1-24hr [default]) 
time_format_24hr: "0" 
 
# URL for external Phone Services 
services_url: "http://pbx.mycompany.com/cisco/services.php" # IP address here alternatively 
 
# URL for external Directory location 
directory_url: "http://pbx.mycompany.com/cisco/directory.php" # IP address here alternatively 
 
# URL for branding logo 
logo_url: "http://pbx.mycompany.com/cisco/logo.bmp" # IP address here alternatively 
 
# Remote Party ID 
remote_party_id: 1 ; 0-Disabled (default), 1-Enabled

# SIP Configuration Generic File 
 
# Image Version 
image_version: P0S3-08-2-00 
phone_label: " " 
 
# Line 1 appearance 
line1_displayname: "x100" 
line1_shortname:"x100" 
line1_name: 100 
line1_authname: "myid" 
line1_password: "mypassword" 
 
# Line 2 appearance 
line2_displayname: "" 
line2_shortname: "" 
line2_name: UNPROVISIONED 
line2_authname: "UNPROVISIONED" 
line2_password: "UNPROVISIONED" 
 
# Line 3 appearance 
line3_displayname: "" 
line3_shortname: "" 
line3_name: UNPROVISIONED 
line3_authname: "UNPROVISIONED" 
line3_password: "UNPROVISIONED" 
 
# Line 4 appearance 
line4_displayname: "" 
line4_shortname: "" 
line4_name: UNPROVISIONED 
line4_authname: "UNPROVISIONED" 
line4_password: "UNPROVISIONED" 
 
# Line 5 appearance 
line5_displayname: "" 
line5_shortname: "" 
line5_name: UNPROVISIONED 
line5_authname: "UNPROVISIONED" 
line5_password: "UNPROVISIONED" 
 
# Line 6 appearance 
line6_displayname: "" 
line6_shortname: "" 
line6_name: UNPROVISIONED 
line6_authname: "UNPROVISIONED" 
line6_password: "UNPROVISIONED" 
 
# Phone Prompt (The prompt that will be displayed on console and telnet) 
phone_prompt: "SIP Phone" ; Limited to 15 characters (Default - SIP Phone) 
 
# Phone Password (Password to be used for console or telnet login) 
phone_password: "cisco" ; Limited to 31 characters (Default - cisco) 
 
# User classifcation used when Registering [ none(default), phone, ip ] 
user_info: none