Zaptel/TE110P: Rauswaehlen funktioniert nicht

[RTDI]

Hi,

mit meiner Konfiguration funktionieren eingehende Anrufe, sprich mit DDI werden die jeweiligen Anrufe/Durchwahlen an die entsprechenden Sip User weitergeleitet und die Verbindung aufgebaut.

Jedoch funktioniert das raustelefonieren nicht:

*CLI>
    -- Executing EnumLookup("SIP/1010-5b6a", "3") in new stack
ENUM got '0'
    -- Executing Goto("SIP/1010-5b6a", "2000") in new stack
    -- Goto (von-sip,1503,2000)
    -- Executing Macro("SIP/1010-5b6a", "dialout|1503") in new stack
    -- Executing SetCIDNum("SIP/1010-5b6a", "1010|a") in new stack
    -- Executing Dial("SIP/1010-5b6a", "Zap/g1/1503") in new stack
    -- Called g1/1503
    -- Zap/1-1 is making progress passing it to SIP/1010-5b6a
    -- Channel 0/1, span 1 got hangup
    -- Hungup 'Zap/1-1'
  == No one is available to answer at this time
    -- Executing Congestion("SIP/1010-5b6a", "") in new stack
  == Spawn extension (macro-dialout, s, 3) exited non-zero on 'SIP/1010-5b6a' in macro 'dialout'
  == Spawn extension (von-sip, 1503, 2000) exited non-zero on 'SIP/1010-5b6a'
    -- Executing EnumLookup("SIP/1010-5b6a", "") in new stack
Apr 20 13:22:40 WARNING[6990]: app_enumlookup.c:66 enumlookup_exec: EnumLookup requires an argument (extension)
Apr 20 13:22:40 NOTICE[6990]: app_enumlookup.c:130 enumlookup_exec: Don't know how to handle technology '`-- '
    -- Executing Goto("SIP/1010-5b6a", "2000") in new stack
    -- Goto (von-sip,h,2000)
    -- Executing Macro("SIP/1010-5b6a", "dialout|h") in new stack
    -- Executing SetCIDNum("SIP/1010-5b6a", "1010|a") in new stack
    -- Executing Dial("SIP/1010-5b6a", "Zap/g1/h") in new stack
    -- Called g1/h
    -- Hungup 'Zap/2-1'
  == Spawn extension (macro-dialout, s, 2) exited non-zero on 'SIP/1010-5b6a' in macro 'dialout'
  == Spawn extension (von-sip, h, 2000) exited non-zero on 'SIP/1010-5b6a'

Enum soll zurzeit noch nicht funktionieren. Es geht darum, dass ich bei Zap gleich nach dem Waehlen ein Hungup bekomme

Ich habe von Digium eine TE110P Karte eingebaut und richtig auf E1 Modus gejumpert. Das Laden des Kernel Moduls hat auch wunderbarfunktioniert und die Anzeige von ztcfg -vvv gibt folgendes aus:

Zaptel Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: Individual Clear channel (Default) (Slaves: 03)
Channel 04: Individual Clear channel (Default) (Slaves: 04)
Channel 05: Individual Clear channel (Default) (Slaves: 05)
Channel 06: Individual Clear channel (Default) (Slaves: 06)
Channel 07: Individual Clear channel (Default) (Slaves: 07)
Channel 08: Individual Clear channel (Default) (Slaves: 08)
Channel 09: Individual Clear channel (Default) (Slaves: 09)
Channel 10: Individual Clear channel (Default) (Slaves: 10)
Channel 11: Individual Clear channel (Default) (Slaves: 11)
Channel 12: Individual Clear channel (Default) (Slaves: 12)
Channel 13: Individual Clear channel (Default) (Slaves: 13)
Channel 14: Individual Clear channel (Default) (Slaves: 14)
Channel 15: Individual Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Individual Clear channel (Default) (Slaves: 17)
Channel 18: Individual Clear channel (Default) (Slaves: 18)
Channel 19: Individual Clear channel (Default) (Slaves: 19)
Channel 20: Individual Clear channel (Default) (Slaves: 20)
Channel 21: Individual Clear channel (Default) (Slaves: 21)
Channel 22: Individual Clear channel (Default) (Slaves: 22)
Channel 23: Individual Clear channel (Default) (Slaves: 23)
Channel 24: Individual Clear channel (Default) (Slaves: 24)
Channel 25: Individual Clear channel (Default) (Slaves: 25)
Channel 26: Individual Clear channel (Default) (Slaves: 26)
Channel 27: Individual Clear channel (Default) (Slaves: 27)
Channel 28: Individual Clear channel (Default) (Slaves: 28)
Channel 29: Individual Clear channel (Default) (Slaves: 29)
Channel 30: Individual Clear channel (Default) (Slaves: 30)
Channel 31: Individual Clear channel (Default) (Slaves: 31)

31 channels configured.

Meine /etc/zaptel.conf sieht so aus:

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
loadzone=at
defaultzone=at

Meine /etc/asterisk/zapata.conf sieht so aus:

[channels]
busydetect=no
callprogress=no
switchtype=euroisdn
immediate=no
overlapdial=yes
pridialplan=local
prilocaldialplan=local
echocancel=no
echocancelwhenbridged=no
echotrainig=no
signalling=pri_cpe
context=default
internationalprefix=00
nationalprefix=0
usecallingpres=yes
callprogress=no
callerid=asreceived
language=at
group=1
rxgain=0.0
txgain=0.0
channel => 1-15,17-31

hat wer eine idee?
ich meine es ist schon komisch, dass eingehende anrufe funktionieren,
aber ausgehende nicht...