run dr
run dk
run du
run dw
run dd
run dc
tftp 0x82000000 pd-x.squashfs.img; flwrite
tftp 0x82000000 .FLASHING_DONE_STOP_TFTP_NOW
sleep 5"Commands" : [
"burn dhboot.bin.img bootloader",
"burn kernel.img kernel",
"burn partition-x.cramfs.img partition",
"burn romfs-x.squashfs.img rootfs",
"burn data-x.squashfs.img data",
"burn web-x.squashfs.img web"
],
accepting requests..
Open TFTP Server MultiThreaded Version 1.64 Windows Built 2001
starting TFTP...
alias / is mapped to root\
permitted clients: all
server port range: all
max blksize: 65464
default blksize: 512
default timeout: 60
file read allowed: Yes
file create allowed: No
file overwrite allowed: No
thread pool size: 1
Listening On: 192.168.254.254:69
Client 192.168.1.108:2548 root\upgrade_info_7db780a713a4.txt, 1 Blocks Served
Client 192.168.1.108:3900 root\sign.img, 1 Blocks Served
Client 192.168.1.108:3084 root\failed.txt, File not found or No AccessNcat: Version 7.40 ( https://nmap.org/ncat )
Ncat: Listening on 192.168.254.254:5002
Relocation Offset is: 1f6ef000
Relocating to 9feef000, new gd at 9fa4eef0, sp at 9fa4eed0
LogMagicNum:0 gBootLogPtr:9fa4f008.
NAND: Check Flash Memory Controller v100 ... Found
SPI Nand ID Table Version 2.7
SPI Nand(cs 0) ID: 0xc8 0xd1 Name:"5F1GQ4UBYIG"
Block:128KB Page:2KB OOB:64B ECC:8bit/512
Chipsize:128 MiB
MMC:
In: serial
Out: serial
Err: serial
Net: eth0can't find corresponding entry
can't find corresponding entry
partition file version 2
rootfstype squashfs root /dev/mtdblock11
can't find corresponding entry
can't find corresponding entry
partition file version 2
rootfstype squashfs root /dev/mtdblock11
can not search bootargs settings
fail to parse bootargsParametersV2.text info
gSwitchBootPart = 0
SDUPDATE_init
SD_parseBootargs
SD_update: Hisilicon ETH net controler
find 88e6020 switch !
phy_addr=1, phy_id=3625cc6
phy BCM54811 init
eth0 : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
Using eth0 device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1Filename 'upgrade_info_7db780a713a4.txt'.Default Load Address: 0x82000000,Download to address: 0x82000000
Loading: file size: 186 Bytes time: 0.307s speed: 0 Bytes/s
done
Bytes transferred = 186 (ba hex)
cmdListNode->cmd = run dk
cmd:(run dk) is not support!
cmdListNode->cmd = run dp
cmd:(run dp) is not support!
cmdListNode->cmd = run dr
cmd:(run dr) is not support!
cmdListNode->cmd = run dd
cmd:(run dd) is not support!
cmdListNode->cmd = run dw
cmd:(run dw) is not support!
cmdListNode->cmd = tftp 0x82000000 sign.img; flwrite
Hisilicon ETH net controler
find 88e6020 switch !
phy_addr=1, phy_id=3625cc6
eth0 : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
Using eth0 device
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1Filename 'sign.img'.Default Load Address: 0x82000000,Download to address: 0x82000000
Loading: file size: 128 Bytes time: 0.003s speed: 41 KiB/s
done
Bytes transferred = 128 (80 hex)
[ERR0002:]over read addr!
flwrite - flwrite - write data into FLASH memory
Usage:
flwrite DestAddr
- write data into DestAddr(0xA0000000~0xA4000000)
cmd Failed tftp 0x82000000 sign.img; flwrite!
can't find corresponding entry
can't find corresponding entry
partition file version 2
rootfstype squashfs root /dev/mtdblock11
get bootargs info failed
cmdLine mem=128M console=ttyS0,115200 root=/dev/mtdblock11 rootfstype=squashfs
AUF_sendLog size = 16384
Hisilicon ETH net controler
find 88e6020 switch !
phy_addr=1, phy_id=3625cc6
eth0 : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
bootargs=mem=128M console=ttyS0,115200 root=/dev/mtdblock12
rootfstype=squashfs
bootcmd=kload 0x82000000;
bootm 0x82000000
bootdelay=2
baudrate=115200
ethaddr=00:12:34:56:78:9A
ipaddr=192.168.1.108
serverip=192.168.1.1
gatewayip=192.168.1.1
netmask=255.255.255.
bootfile=uImage arch=arm cpu=armv7 board=hi3516cv500 board_name=hi3516cv500 vendor=hisilicon soc=hi3516cv500
wifiaddr=00:12:34:56:78:91
ID=000000000000000000
da=tftp 0x82000000 dhboot.bin.img; flwrite;tftp dhboot-min.bin.img;flwrite
dr=tftp 0x82000000 romfs-x.squashfs.img; flwrite
dk=tftp 0x82000000 kernel.img; flwrite
du=tftp 0x82000000 user-x.squashfs.img; flwrite
dw=tftp 0x82000000 web-x.squashfs.img; flwrite
ds=tftp 0x82000000 dsp-x.cramfs.img; flwrite
dp=tftp 0x82000000 partition-x.cramfs.img;flwrite
dc=tftp 0x82000000 custom-x.squashfs.img; flwrite
up=tftp 0x82000000 update.img; flwrite
tk=tftp 0x82000000 uImage; bootm
dh_keyboard=1
appauto=1
sysbackup=1
loglevel=4
autosip=192.168.254.254
autolip=192.168.1.108
autogw=192.168.1.1
autonm=255.255.255.0
backupsip=192.168.1.100
nfssip=192.168.1.109
dpd=tftp 0x82000000 pd-x.squashfs.img; flwrite
dfw=tftp 0x82000000 firmware-x.squashfs.img;flwrite
mp_autotest=0dk
dp
dr
dd
dwroot@sys77:/home/rio/Dahua-Firmware-Mod-Kit# strings u-boot.bin | grep VTO
VTO2202F
VTO2202Ftftp 0x82000000 kernel.img; flwrite
tftp 0x82000000 partition-x.cramfs.img;flwrite
tftp 0x82000000 romfs-x.squashfs.img; flwrite
tftp 0x82000000 data-x.squashfs.img; flwrite
tftp 0x82000000 web-x.squashfs.img; flwrite
tftp 0x82000000 sign.img; flwrite
sleep 5From: <sip:[email protected]>;tag=432a08849f710772f82545fa5bc1654e
Max-Forwards: 70
To: <sip:[email protected]:5060>
User-Agent: Dahua UAC/3.0 VTO4202F V4.410.0.4
Via: SIP/2.0/UDP 192.168.77.80:5060;rport;branch=z9hG4bK0cd9b7a5dfcce0e8d5e26cfbb52d93dd
v=0
o=- 1587938653 2 IN IP4 192.168.77.80
s=Dahua VT 1.5
c=IN IP4 192.168.77.80
t=0 0
m=audio 20000 RTP/AVP 101 0 97
a=rtpmap:0 PCMU/8000
a=rtpmap:97 PCM/16000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 20001 RTP/AVP 96
a=framerate:25.000000
a=rtpmap:96 H264/90000
a=sendrecv
