Hallo,
ich brauche Eure Hilfe!
ich versuche eine UC 500 mit einer Agfeo Telefonanlage zu koppeln, doch es haut nicht hin.
Hier die Details:
Mehrgeräte Anschluss mit 3 Nummern
ISDN Port auf Bri 0/1/0
Tk Anlage auf Bri 0/1/1
2 IP Telefone , 7912 (Durchwahl 80 + 81)
1 Analoges Tel an der Agfeo (Durchwahl 13 )
Was funktioniert:
IP Telefone können raus telefonieren sowie untereinander telefonieren.
Was nicht funktioniert:
Analog Telefon kann kein IP Telefon anrufen und auch nicht raustelefonieren.
Umgekehrt gehts auch nicht.
Konfig.:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
translation-rule 2
Rule 0 ^.% 00 national national
Rule 1 ^.% 000 international international
Rule 2 ^.% 0 subscriber subscriber
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn skipsend-idverify
!
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn protocol-emulate network
isdn layer1-emulate network
isdn incoming-voice voice
isdn k 7
isdn skipsend-idverify
voice-port 0/1/0
compand-type a-law
no comfort-noise
cptone DE
!
voice-port 0/1/1
compand-type a-law
no comfort-noise
cptone DE
bearer-cap Speech
!
dial-peer voice 999 pots
destination-pattern 0T
direct-inward-dial
port 0/1/0
!
dial-peer voice 1000 pots
description **ISDN intern**
destination-pattern 13
direct-inward-dial
port 0/1/1
!
telephony-service
load 7960-7940 P0030702T023
max-ephones 4
max-dn 4
ip source-address 10.1.10.60 port 2000
auto assign 1 to 4
user-locale DE
user-locale 1 DE
user-locale 2 DE
user-locale 3 DE
user-locale 4 DE
network-locale DE
network-locale 1 DE
network-locale 2 DE
network-locale 3 DE
network-locale 4 DE
dialplan-pattern 1 XXXX.. extension-length 2 extension-pattern ..
max-conferences 4 gain -6
transfer-system full-consult
transfer-pattern 0.T
transfer-pattern .T
create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn 1 dual-line
number 80
label 80
!
!
ephone-dn 2 dual-line
number 81
label 81
ephone 1
no multicast-moh
device-security-mode none
mac-address
username
type 7912
button 1:1
!
!
!
ephone 2
no multicast-moh
device-security-mode none
mac-address
username
type 7912
button 1:2
Dubug, versuch von Analog Telefon zum IP Telefon:
*Mar 19 12:51:40.523: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/1/1, TEI 65 changed to up
*Mar 19 12:51:40.563: ISDN BR0/1/1 Q931: RX <- SETUP pd = 8 callref = 0x2C
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x83
Preferred, Any B-channel
Progress Ind i = 0x8583 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '13'
Plan:Unknown, Type:Unknown
*Mar 19 12:51:40.571: ISDN BR0/1/1 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x22, event 0x7 ces 1
*Mar 19 12:51:40.575: ISDN BR0/1/1 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x22, event 0x5 ces 1
*Mar 19 12:51:44.483: ISDN BR0/1/1 Q931: RX <- SETUP pd = 8 callref = 0x2C
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x83
Preferred, Any B-channel
Progress Ind i = 0x8583 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '13'
Plan:Unknown, Type:Unknown
*Mar 19 12:51:44.491: ISDN BR0/1/1 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x23, event 0x7 ces 1
*Mar 19 12:51:44.491: ISDN BR0/1/1 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x23, event 0x5 ces 1
Danke für Eure Hilfe
ich brauche Eure Hilfe!
ich versuche eine UC 500 mit einer Agfeo Telefonanlage zu koppeln, doch es haut nicht hin.
Hier die Details:
Mehrgeräte Anschluss mit 3 Nummern
ISDN Port auf Bri 0/1/0
Tk Anlage auf Bri 0/1/1
2 IP Telefone , 7912 (Durchwahl 80 + 81)
1 Analoges Tel an der Agfeo (Durchwahl 13 )
Was funktioniert:
IP Telefone können raus telefonieren sowie untereinander telefonieren.
Was nicht funktioniert:
Analog Telefon kann kein IP Telefon anrufen und auch nicht raustelefonieren.
Umgekehrt gehts auch nicht.
Konfig.:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
translation-rule 2
Rule 0 ^.% 00 national national
Rule 1 ^.% 000 international international
Rule 2 ^.% 0 subscriber subscriber
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn sending-complete
isdn skipsend-idverify
!
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn protocol-emulate network
isdn layer1-emulate network
isdn incoming-voice voice
isdn k 7
isdn skipsend-idverify
voice-port 0/1/0
compand-type a-law
no comfort-noise
cptone DE
!
voice-port 0/1/1
compand-type a-law
no comfort-noise
cptone DE
bearer-cap Speech
!
dial-peer voice 999 pots
destination-pattern 0T
direct-inward-dial
port 0/1/0
!
dial-peer voice 1000 pots
description **ISDN intern**
destination-pattern 13
direct-inward-dial
port 0/1/1
!
telephony-service
load 7960-7940 P0030702T023
max-ephones 4
max-dn 4
ip source-address 10.1.10.60 port 2000
auto assign 1 to 4
user-locale DE
user-locale 1 DE
user-locale 2 DE
user-locale 3 DE
user-locale 4 DE
network-locale DE
network-locale 1 DE
network-locale 2 DE
network-locale 3 DE
network-locale 4 DE
dialplan-pattern 1 XXXX.. extension-length 2 extension-pattern ..
max-conferences 4 gain -6
transfer-system full-consult
transfer-pattern 0.T
transfer-pattern .T
create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn 1 dual-line
number 80
label 80
!
!
ephone-dn 2 dual-line
number 81
label 81
ephone 1
no multicast-moh
device-security-mode none
mac-address
username
type 7912
button 1:1
!
!
!
ephone 2
no multicast-moh
device-security-mode none
mac-address
username
type 7912
button 1:2
Dubug, versuch von Analog Telefon zum IP Telefon:
*Mar 19 12:51:40.523: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/1/1, TEI 65 changed to up
*Mar 19 12:51:40.563: ISDN BR0/1/1 Q931: RX <- SETUP pd = 8 callref = 0x2C
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x83
Preferred, Any B-channel
Progress Ind i = 0x8583 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '13'
Plan:Unknown, Type:Unknown
*Mar 19 12:51:40.571: ISDN BR0/1/1 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x22, event 0x7 ces 1
*Mar 19 12:51:40.575: ISDN BR0/1/1 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x22, event 0x5 ces 1
*Mar 19 12:51:44.483: ISDN BR0/1/1 Q931: RX <- SETUP pd = 8 callref = 0x2C
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x83
Preferred, Any B-channel
Progress Ind i = 0x8583 - Origination address is non-ISDN
Calling Party Number i = 0x0080, '13'
Plan:Unknown, Type:Unknown
*Mar 19 12:51:44.491: ISDN BR0/1/1 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x23, event 0x7 ces 1
*Mar 19 12:51:44.491: ISDN BR0/1/1 **ERROR**: CCBRI_Go: NO CCB Src->HOST call id 0x23, event 0x5 ces 1
Danke für Eure Hilfe