Hello,
Sunday I made a new image with an external image un USB stick, based on R2821 ?, which was not mounted automatically. Just to be sure there was a real problem, I did an SVN update, make dirclean, and a new menuconfig, and built a new image based on R2825.
I have the same problem: When I start the box, with an USB stick connected, the stick is detected, but not mounted. After I have loaded ext3 by using modprobe, I can mount the stick by hand, and it is mounted without any problem.
Also when I detach and attach the stick, it is not mounted automaically.
With a previous build, based on R2810 the automounting did work correct.
There are more differences between my 2810 build, and my 2825 build, but I don't think they influence this problem. My 2810 based build was a build with a few patches I made myself, for 2825 I used the repository version.
The 2825 build has more packages, of which some are placed on the external USB stick.
For your information:
syslog of R2825 box, until I mounted the stick by hand
.config
syslog of my other box, based on 2810 with another USB stick, which was automounted correctly:
Sunday I made a new image with an external image un USB stick, based on R2821 ?, which was not mounted automatically. Just to be sure there was a real problem, I did an SVN update, make dirclean, and a new menuconfig, and built a new image based on R2825.
I have the same problem: When I start the box, with an USB stick connected, the stick is detected, but not mounted. After I have loaded ext3 by using modprobe, I can mount the stick by hand, and it is mounted without any problem.
Also when I detach and attach the stick, it is not mounted automaically.
With a previous build, based on R2810 the automounting did work correct.
There are more differences between my 2810 build, and my 2825 build, but I don't think they influence this problem. My 2810 based build was a build with a few patches I made myself, for 2825 I used the repository version.
The 2825 build has more packages, of which some are placed on the external USB stick.
For your information:
syslog of R2825 box, until I mounted the stick by hand
Code:
Jan 1 01:00:52 fritz user.warn kernel: [setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x14 )
Jan 1 01:00:52 fritz user.debug kernel: Calling initcall 0x940017e4: ohio_late_init+0x0/0x3c()
Jan 1 01:00:52 fritz user.warn kernel: [ohio_late_init]
Jan 1 01:00:52 fritz user.debug kernel: Calling initcall 0x94204164: ohio_clk_switch_init+0x0/0x60()
Jan 1 01:00:52 fritz user.debug kernel: Calling initcall 0x942043e0: speedup_init+0x0/0x3c()
Jan 1 01:00:52 fritz user.debug kernel: Calling initcall 0x94211ab8: seqgen_init+0x0/0x20()
Jan 1 01:00:52 fritz user.debug kernel: Calling initcall 0x940d4d00: avm_event_push_button_init+0x0/0x130()
Jan 1 01:00:52 fritz user.info kernel: [avm_new] push_button_gpio=8 value=1 enabled
Jan 1 01:00:52 fritz user.debug kernel: Calling initcall 0x94212d78: tffs_init+0x0/0x224()
Jan 1 01:00:52 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Jan 1 01:00:52 fritz user.warn kernel: mount on mtd4 and mtd5 (double buffering)
Jan 1 01:00:52 fritz user.info kernel: Adam2
Jan 1 01:00:52 fritz user.info kernel: environment variables API installed.
Jan 1 01:00:52 fritz user.debug kernel: Calling initcall 0x94213bc8: early_uart_console_switch+0x0/0xb4()
Jan 1 01:00:52 fritz user.debug kernel: Calling initcall 0x9412cdf8: net_random_reseed+0x0/0x34()
Jan 1 01:00:52 fritz user.debug kernel: Calling initcall 0x94218200: ip_auto_config+0x0/0x1130()
Jan 1 01:00:52 fritz user.warn kernel: [prepare_namespace] new mount root /dev/mtdblock1
Jan 1 01:00:52 fritz user.warn kernel: NumProbs = 7990 / 2 -> 15980
Jan 1 01:00:52 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:52 fritz user.warn kernel: Freeing prom memory: 0kb freed
Jan 1 01:00:52 fritz user.info kernel: Freeing unused kernel memory: 116k freed (7540 free)
Jan 1 01:00:52 fritz user.warn kernel: [setup_irq]: irq 15 irqaction->handler 0x940e0f6c (serial8250_interrupt+0x0/0x13c )
Jan 1 01:00:52 fritz user.warn kernel: AR7WDT: System Init UEberwachung 240 Sekunden
Jan 1 01:00:52 fritz user.warn kernel: TFFS Name Table E
Jan 1 01:00:52 fritz user.info kernel: [avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=6250 key=button_key_3
Jan 1 01:00:52 fritz user.info kernel: NET: Registered protocol family 10
Jan 1 01:00:52 fritz user.info kernel: Disabled Privacy Extensions on device 941df0f0(lo)
Jan 1 01:00:52 fritz user.warn kernel: failed to load transform for md5
Jan 1 01:00:52 fritz user.info kernel: IPv6 over IPv4 tunneling driver
Jan 1 01:00:52 fritz user.warn kernel: Piglet: module license '
Jan 1 01:00:52 fritz user.warn kernel: (C) Copyright 2005 by AVM
Jan 1 01:00:52 fritz user.warn kernel: ' taints kernel.
Jan 1 01:00:52 fritz user.warn kernel: EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1
Jan 1 01:00:52 fritz user.info kernel: JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Jan 1 01:00:52 fritz user.err kernel: jffs2: Too few erase blocks (2)
Jan 1 01:00:52 fritz user.err kernel: jffs2: Too few erase blocks (2)
Jan 1 01:00:52 fritz user.warn kernel: registered device TI Avalanche SAR
Jan 1 01:00:52 fritz user.warn kernel: tiatm driver (patch_annex=0xc011d46c)
Jan 1 01:00:52 fritz user.warn kernel: [tiatm] Set StrictPriority=0
Jan 1 01:00:52 fritz user.warn kernel: DSP binary filesize = 327380 bytes
Jan 1 01:00:52 fritz user.warn kernel: [tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019
Jan 1 01:00:52 fritz user.info kernel: [avm_power]Ohio250 detected -> overclocking possible
Jan 1 01:00:52 fritz user.info kernel: [avm_power]#### boostVoltage: DSP Core voltage set to 1,5 V ####
Jan 1 01:00:52 fritz user.warn kernel: [setup_irq]: irq 23 irqaction->handler 0xc0104208 (tn7atm_sar_irq+0x0/0x30 [tiatm] )
Jan 1 01:00:52 fritz user.warn kernel: [setup_irq]: irq 31 irqaction->handler 0xc0104238 (tn7atm_dsl_irq+0x0/0x28 [tiatm] )
Jan 1 01:00:52 fritz user.warn kernel: [tiatm]: Powermanagment (States => 1,3,10) supported!
Jan 1 01:00:52 fritz user.warn kernel: Texas Instruments ATM driver: version:[4.07.07.00]
Jan 1 01:00:52 fritz user.warn kernel: [tiatm] AvmInterface length: 44
Jan 1 01:00:52 fritz user.warn kernel: ubik2 driver (ubik2 - 0x10=0xc0131af4)
Jan 1 01:00:52 fritz user.warn kernel: atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc0120bfc
Jan 1 01:00:52 fritz user.warn kernel: atm_dsp_register_ubik2: dsp mem pointer 0xa1c10b0c
Jan 1 01:00:52 fritz user.err kernel: ubik2_init_interface: DSP-Link Version v3 8480
Jan 1 01:00:52 fritz user.info kernel: driver params overwritten io_addr=0x0 irq_num=0
Jan 1 01:00:52 fritz user.warn kernel: [setup_irq]: irq 28 irqaction->handler 0xc012b5f0 (soft_interrupt_handler+0x0/0x30 [ubik2] )
Jan 1 01:00:52 fritz user.warn kernel: capicodec_init()
Jan 1 01:00:52 fritz user.warn kernel: [capi_codec] support fax
Jan 1 01:00:52 fritz user.warn kernel: [capi_codec] support Codecs
Jan 1 01:00:52 fritz user.info kernel: usbcore: registered new driver usbfs
Jan 1 01:00:52 fritz user.info kernel: usbcore: registered new driver hub
Jan 1 01:00:52 fritz user.info kernel: AHCI RevisionID = 0x02, RamSize = 16384, NumPorts= 1
Jan 1 01:00:52 fritz user.warn kernel: [setup_irq]: irq 9 irqaction->handler 0xc01cd490 (ahci_irq+0x0/0x880 [usbahcicore] )
Jan 1 01:00:52 fritz user.info kernel: ahci : new USB bus registered, assigned bus number 1
Jan 1 01:00:52 fritz user.info kernel: kdsldmod: init start (May 1 2008 16:11:33) sizeof(struct sk_buff)=176
Jan 1 01:00:52 fritz user.info kernel: kdsldmod: init done
Jan 1 01:00:52 fritz user.info kernel: kdsld: PPP led: off (value=0)
Jan 1 01:00:52 fritz user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:52 fritz user.info kernel: hub 1-0:1.0: 1 port detected
Jan 1 01:00:52 fritz user.info kernel: avm_net_trace: New net trace device 'WLAN' registered with minor 0.
Jan 1 01:00:52 fritz user.err kernel: [avm_power] : ethernet port 0 status 2
Jan 1 01:00:52 fritz user.err kernel: [avm_power] : ethernet port 1 status 1
Jan 1 01:00:52 fritz user.err kernel: [avm_power] : ethernet port 2 status 1
Jan 1 01:00:52 fritz user.err kernel: [avm_power] : ethernet port 3 status 1
Jan 1 01:00:52 fritz user.info kernel: usb 1-1: new full speed USB device using ahci and address 2
Jan 1 01:00:52 fritz user.notice kernel: SCSI subsystem initialized
Jan 1 01:00:52 fritz user.info kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:52 fritz user.info kernel: USB Mass Storage device (0204:6025) detected...
Jan 1 01:00:52 fritz user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:52 fritz user.warn kernel: [ohio_vlynq_init] device 0
Jan 1 01:00:52 fritz user.warn kernel: [ohio_vlynq_startup_link]
Jan 1 01:00:52 fritz user.warn kernel: [setup_irq]: irq 29 irqaction->handler 0x9400592c (vlynq_interrupt+0x0/0x34 )
Jan 1 01:00:52 fritz user.warn kernel: [setup_irq]: irq 79 irqaction->handler 0xc03b739c (tiwlan_ddaVlynqIsr+0x0/0x28 [tiap] )
Jan 1 01:00:52 fritz user.debug kernel: usb-storage: device found at 2
Jan 1 01:00:52 fritz user.debug kernel: usb-storage: waiting for device to settle before scanning
Jan 1 01:00:52 fritz user.info kernel: usbcore: registered new driver usb-storage
Jan 1 01:00:52 fritz user.info kernel: USB Mass Storage support registered.
Jan 1 01:00:52 fritz user.notice kernel: Vendor: Model: Flash Disk Rev: 5.00
Jan 1 01:00:52 fritz user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 01:00:52 fritz user.notice kernel: SCSI device sda: 1978368 512-byte hdwr sectors (1013 MB)
Jan 1 01:00:52 fritz user.notice kernel: sda: Write Protect is off
Jan 1 01:00:52 fritz user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan 1 01:00:52 fritz user.err kernel: sda: assuming drive cache: write through
Jan 1 01:00:52 fritz user.notice kernel: SCSI device sda: 1978368 512-byte hdwr sectors (1013 MB)
Jan 1 01:00:52 fritz user.notice kernel: sda: Write Protect is off
Jan 1 01:00:52 fritz user.debug kernel: sda: Mode Sense: 0b 00 00 08
Jan 1 01:00:52 fritz user.err kernel: sda: assuming drive cache: write through
Jan 1 01:00:52 fritz user.info kernel: sda: sda1
Jan 1 01:00:52 fritz user.warn kernel: [setup_irq]: irq 27 irqaction->handler 0x940f1c7c (cpmac_mai
Jan 1 01:00:52 fritz user.info kernel: n_isr+0x0/0x78 )
Jan 1 01:00:52 fritz user.notice kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Jan 1 01:00:52 fritz user.notice kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Jan 1 01:00:52 fritz user.err kernel: [cpmac] cpmac_main_ioctl, unknown ioctl 35142
Jan 1 01:00:52 fritz user.info kernel: device eth0 entered promiscuous mode
Jan 1 01:00:52 fritz user.info kernel: device cpmac0 entered promiscuous mode
Jan 1 01:00:52 fritz user.info kernel: device tiwlan0 entered promiscuous mode
Jan 1 01:00:52 fritz user.info kernel: lan: port 2(tiwlan0) entering learning state
Jan 1 01:00:52 fritz user.info kernel: lan: topology change detected, propagating
Jan 1 01:00:52 fritz user.info kernel: lan: port 2(tiwlan0) entering forwarding state
Jan 1 01:00:52 fritz user.info kernel: device wdsup0 entered promiscuous mode
Jan 1 01:00:52 fritz user.info kernel: lan: port 3(wdsup0) entering learning state
Jan 1 01:00:52 fritz user.info kernel: lan: topology change detected, propagating
Jan 1 01:00:52 fritz user.info kernel: lan: port 3(wdsup0) entering forwarding state
Jan 1 01:00:52 fritz user.info kernel: device wdsdw0 entered promiscuous mode
Jan 1 01:00:52 fritz user.info kernel: lan: port 4(wdsdw0) entering learning state
Jan 1 01:00:52 fritz user.info kernel: lan: topology change detected, propagating
Jan 1 01:00:52 fritz user.info kernel: lan: port 4(wdsdw0) entering forwarding state
Jan 1 01:00:52 fritz user.info kernel: device wdsdw1 entered promiscuous mode
Jan 1 01:00:52 fritz user.info kernel: lan: port 5(wdsdw1) entering learning state
Jan 1 01:00:52 fritz user.info kernel: lan: topology change detected, propagating
Jan 1 01:00:52 fritz user.info kernel: lan: port 5(wdsdw1) entering forwarding state
Jan 1 01:00:52 fritz user.info kernel: device wdsdw2 entered promiscuous mode
Jan 1 01:00:52 fritz user.info kernel: lan: port 6(wdsdw2) entering learning state
Jan 1 01:00:52 fritz user.info kernel: lan: topology change detected, propagating
Jan 1 01:00:52 fritz user.info kernel: lan: port 6(wdsdw2) entering forwarding state
Jan 1 01:00:52 fritz user.info kernel: device wdsdw3 entered promiscuous mode
Jan 1 01:00:52 fritz user.info kernel: lan: port 7(wdsdw3) entering learning state
Jan 1 01:00:52 fritz user.info kernel: lan: topology change detected, propagating
Jan 1 01:00:52 fritz user.info kernel: lan: port 7(wdsdw3) entering forwarding state
Jan 1 01:00:52 fritz user.debug kernel: usb-storage: device scan complete
Jan 1 01:00:52 fritz user.warn kernel: AR7WDT: System Init UEberwachung abgeschlossen (194810 ms noch verfuegbar)
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=99 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=84 mul=154 div=10 offset=974 NormP=2514 mW -> SumNormP=2514 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=83 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=4957 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=-2147483548 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=5897 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=5997 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=6097 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=300 act_rate=0 mul=141 div=10 offset=100 NormP=4330 mW -> SumNormP=10427 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=10427 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=150 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=10944 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=10944 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=100 mul=55 div=10 offset=50 NormP=2800 mW -> SumNormP=13744 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=13744 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=13744 mW
Jan 1 01:00:52 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=19 mul=29 div=10 offset=-17 NormP=273 mW -> SumNormP=14017 mW
Jan 1 01:00:52 fritz user.info kernel: SysRq : Changing Loglevel
Jan 1 01:00:52 fritz user.warn kernel: Loglevel set to 4
Jan 1 01:00:52 fritz user.debug kernel: wdsup0: no IPv6 routers present
Jan 1 01:00:52 fritz user.debug kernel: tiwlan0: no IPv6 routers present
Jan 1 01:00:52 fritz user.debug kernel: wdsdw0: no IPv6 routers present
Jan 1 01:00:52 fritz user.debug kernel: wdsdw1: no IPv6 routers present
Jan 1 01:00:52 fritz user.debug kernel: wdsdw2: no IPv6 routers present
Jan 1 01:00:52 fritz user.debug kernel: wdsdw3: no IPv6 routers present
Jan 1 01:00:53 fritz user.debug kernel: lan: no IPv6 routers present
Jan 1 01:00:53 fritz user.debug kernel: cpmac0: no IPv6 routers present
Jan 1 01:00:53 fritz user.debug kernel: eth0: no IPv6 routers present
Jan 1 01:01:05 fritz authpriv.info dropbear[920]: Running in background
Jan 1 01:01:08 fritz user.info multid[1015]: startup ($Revision: 1.140 $$CompileDate: May 1 2008 16:10:41 $)
Jan 1 01:01:08 fritz user.err multid[1017]: already running (611), exit
Jan 1 01:01:09 fritz user.info kernel: lan: port 3(wdsup0) entering disabled state
Jan 1 01:01:16 fritz user.info kernel: lan: port 3(wdsup0) entering learning state
Jan 1 01:01:16 fritz user.info kernel: lan: topology change detected, propagating
Jan 1 01:01:16 fritz user.info kernel: lan: port 3(wdsup0) entering forwarding state
Dec 2 07:27:58 fritz daemon.info ntpd[1019]: set local clock to Tue Dec 2 07:27:58 CET 2008 (offset 281514399.160359s)
Dec 2 07:27:58 fritz user.err telefon[657]: set initial telefon time from linux time to 7:27 2.12 2008!
Dec 2 07:28:00 fritz daemon.info radvd[1098]: version 1.2 started
Dec 2 07:28:12 fritz user.warn kernel: /proc/tffs: info request: success
Dec 2 07:28:28 fritz authpriv.info dropbear[1169]: Child connection from ::ffff:192.168.2.20:51040
Dec 2 07:28:32 fritz authpriv.notice dropbear[1169]: pubkey auth succeeded for 'root' with key md5 xx from ::ffff:192.168.2.20:51040
Dec 2 07:28:51 fritz user.warn kernel: [speedup] -> 62.5 MHz
Dec 2 07:29:49 fritz user.warn kernel: [speedup] -> 125 MHz
Dec 2 07:29:49 fritz user.info kernel: kjournald starting. Commit interval 5 seconds
Dec 2 07:29:49 fritz user.info kernel: EXT3 FS on sda1, internal journal
Dec 2 07:29:49 fritz user.info kernel: EXT3-fs: recovery complete.
Dec 2 07:29:49 fritz user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Code:
#
# Automatically generated make config: don't edit
#
FREETZ_HAVE_DOT_CONFIG=y
#
# General --------------------------------
#
FREETZ_AVM_VERSION_04_57=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
FREETZ_TYPE_FON_WLAN_7170=y
# FREETZ_TYPE_FON_WLAN_7240 is not set
# FREETZ_TYPE_FON_WLAN_7270 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
# FREETZ_TYPE_WLAN_3131 is not set
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_SPEEDPORT_W701V is not set
# FREETZ_TYPE_CUSTOM is not set
# FREETZ_TYPE_LABOR is not set
# FREETZ_TYPE_ALIEN_HARDWARE is not set
FREETZ_AVM_VERSION_STRING="04.57"
# FREETZ_TYPE_LANG_DE is not set
# FREETZ_TYPE_LANG_A_CH is not set
FREETZ_TYPE_LANG_EN=y
FREETZ_TYPE_LANG_STRING="en"
# FREETZ_TYPE_ANNEX_A is not set
FREETZ_TYPE_ANNEX_B=y
FREETZ_TYPE_STRING="7170"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
FREETZ_REPLACE_KERNEL=y
FREETZ_SHOW_ADVANCED=y
FREETZ_TARGET_IPV6_SUPPORT=y
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ohio"
FREETZ_KERNEL_MTD_SIZE=119
FREETZ_HAS_PHONE=y
FREETZ_HAS_WLAN=y
# FREETZ_HAS_USB_CLIENT is not set
FREETZ_HAS_USB_HOST=y
# FREETZ_HAS_AVM_INETD is not set
#
# Mod ------------------------------------
#
# FREETZ_LANG_DE is not set
FREETZ_LANG_EN=y
FREETZ_LANG_STRING="en"
#
# Patches
#
#
# Remove Brandings
#
# FREETZ_REMOVE_BRANDING_avme is not set
# FREETZ_REMOVE_HELP is not set
# FREETZ_REMOVE_ASSISTANT is not set
# FREETZ_REMOVE_TR069 is not set
# FREETZ_PATCH_VCC is not set
# FREETZ_PATCH_ENUM is not set
# FREETZ_PATCH_SIGNED is not set
FREETZ_PATCH_USBSTORAGE=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
FREETZ_AUTOMOUNT_EXT2=y
FREETZ_AUTOMOUNT_EXT3=y
# FREETZ_AUTOMOUNT_NTFS is not set
# FREETZ_AUTOMOUNT_REISER_FS is not set
# FREETZ_AUTORUN_AUTOEND is not set
# FREETZ_PATCH_MAXDEVCOUNT is not set
# FREETZ_PATCH_GETCONS is not set
FREETZ_REMOVE_UPNP=y
# FREETZ_REMOVE_UPNP_LIBS is not set
FREETZ_REMOVE_USERMAN=y
# FREETZ_REMOVE_FTPD is not set
# FREETZ_REMOVE_MEDIASRV is not set
# FREETZ_REMOVE_MINID is not set
# FREETZ_REMOVE_AURA_USB is not set
# FREETZ_REMOVE_DSLD is not set
# FREETZ_REMOVE_CAPIOVERTCP is not set
# FREETZ_REMOVE_VOIP_ISDN is not set
#
# Package selection
#
#
# *** not all packages support selected language ***
#
# FREETZ_SELECTED_LANG_ONLY is not set
#
# Standard packages
#
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
FREETZ_PACKAGE_BRIDGE_UTILS=y
FREETZ_PACKAGE_CALLMONITOR=y
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
# FREETZ_PACKAGE_CPMACCFG is not set
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
# FREETZ_PACKAGE_DNSMASQ is not set
FREETZ_PACKAGE_DROPBEAR=y
# FREETZ_PACKAGE_DROPBEAR_SERVER_ONLY is not set
# FREETZ_PACKAGE_DROPBEAR_WITH_ZLIB is not set
# FREETZ_PACKAGE_DROPBEAR_SFTP_SERVER is not set
FREETZ_PACKAGE_DTMFBOX=y
#
# CAPI/SIP
#
FREETZ_PACKAGE_DTMFBOX_WITH_CAPI=y
FREETZ_PACKAGE_DTMFBOX_WITH_VOIP=y
FREETZ_PACKAGE_DTMFBOX_WITH_ICE=y
#
# Codecs
#
FREETZ_PACKAGE_DTMFBOX_WITH_G711_CODEC=y
# FREETZ_PACKAGE_DTMFBOX_WITH_SPEEX_CODEC is not set
# FREETZ_PACKAGE_DTMFBOX_WITH_GSM_CODEC is not set
#
# Misc
#
FREETZ_PACKAGE_DTMFBOX_WITH_WEBPHONE=y
FREETZ_PACKAGE_DTMFBOX_WITH_HELP=y
FREETZ_PACKAGE_DTMFBOX_WITH_ESPEAK=y
# FREETZ_PACKAGE_DTMFBOX_WITH_MADPLAY is not set
FREETZ_PACKAGE_ESPEAK=y
FREETZ_PACKAGE_ESPEAK_ALL_LANGUAGES=y
# FREETZ_PACKAGE_FUSE is not set
# FREETZ_PACKAGE_INETD is not set
# FREETZ_PACKAGE_KNOCK is not set
FREETZ_PACKAGE_MC=y
FREETZ_MC_INTERNAL_EDITOR=y
FREETZ_MC_SUBSHELL=y
FREETZ_MC_ONLINE_HELP=y
FREETZ_MC_WITH_NCURSES=y
# FREETZ_PACKAGE_MINI_FO is not set
FREETZ_PACKAGE_MTR=y
# FREETZ_PACKAGE_NANO is not set
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NETSNMP is not set
# FREETZ_PACKAGE_NTFS is not set
FREETZ_PACKAGE_OPENNTPD=y
FREETZ_PACKAGE_OPENVPN=y
# FREETZ_PACKAGE_OPENVPN_STATIC is not set
FREETZ_PACKAGE_OPENVPN_WITH_LZO=y
# FREETZ_PACKAGE_OPENVPN_WITH_MGMNT is not set
FREETZ_PACKAGE_OPENVPN_ENABLE_SMALL=y
# FREETZ_PACKAGE_PINGTUNNEL is not set
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_RCAPID is not set
FREETZ_PACKAGE_SAMBA=y
FREETZ_PACKAGE_NMBD=y
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_VPNC is not set
# FREETZ_PACKAGE_VSFTPD is not set
#
# Web interface
#
FREETZ_PACKAGE_AVM_FIREWALL=y
FREETZ_PACKAGE_DOWNLOADER=y
# FREETZ_PACKAGE_NFSD_CGI is not set
FREETZ_PACKAGE_RRDSTATS=y
# FREETZ_PACKAGE_SPINDOWN_CGI is not set
FREETZ_PACKAGE_SYSLOGD_CGI=y
# FREETZ_PACKAGE_VIRTUALIP_CGI is not set
# FREETZ_PACKAGE_WOL_CGI is not set
#
# Debug helpers
#
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set
#
# Testing
#
# FREETZ_GROUP_APACHE_PHP is not set
FREETZ_PACKAGE_BASH=y
# FREETZ_PACKAGE_BASH_MINIMAL is not set
# FREETZ_PACKAGE_BASH_READLINE is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_CRYPTSETUP is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DIGITEMP is not set
# FREETZ_PACKAGE_DNS2TCP is not set
# FREETZ_PACKAGE_DTACH is not set
FREETZ_PACKAGE_E2FSPROGS=y
# FREETZ_PACKAGE_EMPTY is not set
FREETZ_PACKAGE_FSTYP=y
# FREETZ_PACKAGE_GNU_MAKE is not set
# FREETZ_PACKAGE_HD_IDLE is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
# FREETZ_PACKAGE_INADYN_MT is not set
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
FREETZ_PACKAGE_MDEV=y
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NFS_UTILS is not set
# FREETZ_PACKAGE_NFSROOT is not set
# FREETZ_PACKAGE_OBEXFTP is not set
# FREETZ_PACKAGE_OPENSSH is not set
# FREETZ_PACKAGE_PORTMAP is not set
# FREETZ_PACKAGE_PPTP is not set
# FREETZ_PACKAGE_PPTPD is not set
# FREETZ_PACKAGE_QUAGGA is not set
FREETZ_PACKAGE_RRDTOOL=y
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_TCP_WRAPPERS is not set
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
# FREETZ_PACKAGE_TREE is not set
# FREETZ_PACKAGE_USBIP is not set
# FREETZ_PACKAGE_USBROOT is not set
# FREETZ_PACKAGE_VIM is not set
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
FREETZ_SHOW_UNSTABLE_PACKAGES=y
#
# Unstable
#
# FREETZ_PACKAGE_COLLECTD is not set
# FREETZ_PACKAGE_IPTABLES is not set
#
# SANE
#
# FREETZ_PACKAGE_SANE_BACKENDS is not set
# FREETZ_PACKAGE_TINC is not set
FREETZ_PACKAGE_IPUTILS=y
# FREETZ_PACKAGE_AICCU is not set
FREETZ_PACKAGE_RADVD=y
# FREETZ_PACKAGE_GW6 is not set
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y
#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_SITE="ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/english/annex_b"
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7170.AnnexB.en.29.04.57.image"
#
# Freetz package download sites
#
FREETZ_MOD_DL_NUM_SITES="5"
#
# Download site #1 - default: http://freetz.3dfxatwork.de
#
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"
#
# Download site #2 - default: http://freetz.wirsind.info
#
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"
#
# Download site #3 - default: http://freetz.magenbrot.net
#
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"
#
# Download site #4 - default: empty (reserved for later use)
#
FREETZ_MOD_DL_SITE_4=""
#
# Download site #5 - user-defined
#
FREETZ_MOD_DL_SITE_5=""
FREETZ_VERBOSITY_LEVEL=2
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_HANSOLO is not set
FREETZ_FAVICON_STRING="none"
FREETZ_SUBVERSION_STRING=y
FREETZ_DEVELOPER_VERSION_STRING=y
#
# External
#
EXTERNAL_ENABLED=y
# EXTERNAL_DOWNLOADER is not set
EXTERNAL_SUBDIRS=y
EXTERNAL_CREATEPAK=y
# EXTERNAL_DIR1 is not set
# EXTERNAL_DIR2 is not set
# EXTERNAL_DIR3 is not set
EXTERNAL_CUSTOM_DIR=y
EXTERNAL_CUSTOM_DIRNAME="/var/media/ftp/uStora1/external"
EXTERNAL_DIRECTORY="/var/media/ftp/uStora1/external"
EXTERNAL_OWN_FILES=""
#
# packages
#
EXTERNAL_FREETZ_PACKAGE_BASH=y
EXTERNAL_FREETZ_PACKAGE_E2FSPROGS=y
#
# e2fsprogs
#
EXTERNAL_FREETZ_PACKAGE_E2FSPROGS_e2fsck=y
EXTERNAL_FREETZ_PACKAGE_E2FSPROGS_mke2fs=y
EXTERNAL_FREETZ_PACKAGE_E2FSPROGS_tune2fs=y
EXTERNAL_FREETZ_PACKAGE_E2FSPROGS_blkid=y
EXTERNAL_FREETZ_PACKAGE_ESPEAK=y
EXTERNAL_FREETZ_PACKAGE_MC=y
EXTERNAL_FREETZ_PACKAGE_MTR=y
EXTERNAL_FREETZ_PACKAGE_RRDTOOL=y
#
# services
#
EXTERNAL_FREETZ_PACKAGE_OPENVPN=y
EXTERNAL_FREETZ_PACKAGE_SAMBA=y
#
# Samba
#
EXTERNAL_FREETZ_PACKAGE_SAMBA_nmbd=y
EXTERNAL_FREETZ_PACKAGE_SAMBA_smbd=y
EXTERNAL_FREETZ_PACKAGE_SAMBA_smbpasswd=y
#
# libraries
#
EXTERNAL_FREETZ_LIB_libart_lgpl_2=y
# EXTERNAL_FREETZ_LIB_libcrypto is not set
EXTERNAL_FREETZ_LIB_libfreetype=y
EXTERNAL_FREETZ_LIB_libncurses=y
EXTERNAL_FREETZ_LIB_libpng12=y
# EXTERNAL_FREETZ_LIB_libresolv is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
# FREETZ_SQUASHFS_BLOCKSIZE_16384 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_32768 is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set
#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_DIFF is not set
# FREETZ_BUSYBOX_INETD is not set
# FREETZ_BUSYBOX_PATCH is not set
FREETZ_BUSYBOX_START_STOP_DAEMON=y
FREETZ_BUSYBOX_WGET=y
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_NICE is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
# FREETZ_BUSYBOX_FASTPROC is not set
# FREETZ_BUSYBOX_KEYS is not set
# FREETZ_BUSYBOX_BRCTL is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_SEQ is not set
FREETZ_BUSYBOX_TAC=y
FREETZ_BUSYBOX_MDEV_RENAME=y
# FREETZ_BUSYBOX_MDEV_RENAME_REGEXP is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
FREETZ_BUSYBOX_MOUNT_LABEL=y
FREETZ_BUSYBOX_VOLUMEID=y
FREETZ_BUSYBOX_VOLUMEID_EXT=y
FREETZ_BUSYBOX_VOLUMEID_FAT=y
#
# IPv6 Options
#
# FREETZ_BUSYBOX_FEATURE_PREFER_IPV4_ADDRESS is not set
FREETZ_BUSYBOX_IP=y
FREETZ_BUSYBOX_FEATURE_IP_ADDRESS=y
FREETZ_BUSYBOX_FEATURE_IP_LINK=y
FREETZ_BUSYBOX_FEATURE_IP_ROUTE=y
FREETZ_BUSYBOX_FEATURE_IP_TUNNEL=y
FREETZ_BUSYBOX_FEATURE_IP_RULE=y
FREETZ_BUSYBOX_PING6=y
FREETZ_BUSYBOX_PSCAN=y
#
# Kernel modules
#
# FREETZ_MODULES_ALL is not set
#
# crypto
#
# FREETZ_MODULE_aes is not set
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_sha1 is not set
# FREETZ_MODULE_sha256 is not set
#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbcore is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_hci_usb is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set
#
# fs
#
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
FREETZ_MODULE_ext3=y
FREETZ_MODULE_ext2=y
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_fuse is not set
FREETZ_MODULE_jbd=y
# FREETZ_MODULE_lockd is not set
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set
# FREETZ_MODULE_nfsd is not set
# FREETZ_MODULE_exportfs is not set
# FREETZ_MODULE_nfs is not set
FREETZ_MODULE_nls_cp437=y
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
FREETZ_MODULE_nls_iso8859_1=y
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_ntfs is not set
# FREETZ_MODULE_reiserfs is not set
# FREETZ_MODULE_smbfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdods is not set
# FREETZ_MODULE_jffs2 is not set
FREETZ_MODULE_mbcache=y
#
# lib
#
# FREETZ_MODULE_crc_ccitt is not set
#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
FREETZ_MODULE_ipv6=y
# FREETZ_MODULE_l2cap is not set
# FREETZ_MODULE_rfcomm is not set
# FREETZ_MODULE_sunrpc is not set
#
# Shared libraries
#
# FREETZ_STRIP_LIBRARIES is not set
#
# Libraries -------------------------------
#
# FREETZ_LIB_libatm is not set
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libopenobex is not set
#
# Crypto & SSL
#
#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set
#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libxyssl is not set
FREETZ_LIB_libcrypto=y
FREETZ_LIB_libssl=y
# FREETZ_LIB_libavmhmac is not set
#
# Data compression
#
FREETZ_LIB_liblzo2=y
FREETZ_LIB_libz=y
#
# Graphics & fonts
#
FREETZ_LIB_libfreetype=y
FREETZ_LIB_libart_lgpl_2=y
# FREETZ_LIB_libjpeg is not set
FREETZ_LIB_libpng12=y
#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
FREETZ_LIB_libresolv=y
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
FREETZ_LIB_libutil=y
FREETZ_LIB_libuClibcxx=y
FREETZ_LIB_libgcc_s=y
FREETZ_LIB_libglib=y
#
# GLib2
#
# FREETZ_LIB_libglib2 is not set
# FREETZ_LIB_libgobject2 is not set
# FREETZ_LIB_libgmodule2 is not set
# FREETZ_LIB_libgthread2 is not set
#
# ncurses
#
FREETZ_LIB_libncurses=y
#
# terminfo database
#
#
# Select terminfo database entries to install (see help of 'Show all items')
#
FREETZ_LIB_libterminfo=y
# FREETZ_LIB_libterminfo_showall is not set
FREETZ_LIB_libterminfo_ansi=y
FREETZ_LIB_libterminfo_gnome=y
FREETZ_LIB_libterminfo_konsole=y
FREETZ_LIB_libterminfo_linux=y
FREETZ_LIB_libterminfo_putty=y
FREETZ_LIB_libterminfo_rxvt=y
FREETZ_LIB_libterminfo_screen=y
FREETZ_LIB_libterminfo_screenminusw=y
FREETZ_LIB_libterminfo_sun=y
FREETZ_LIB_libterminfo_vt100=y
FREETZ_LIB_libterminfo_vt102=y
FREETZ_LIB_libterminfo_vt102minusnsgr=y
FREETZ_LIB_libterminfo_vt102minusw=y
FREETZ_LIB_libterminfo_vt200=y
FREETZ_LIB_libterminfo_vt220=y
FREETZ_LIB_libterminfo_vt52=y
FREETZ_LIB_libterminfo_xterm=y
FREETZ_LIB_libterminfo_xtermminuscolor=y
FREETZ_LIB_libterminfo_xtermminusxfree86=y
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set
FREETZ_LIB_libcapi20=y
# FREETZ_LIB_libcurl is not set
# FREETZ_LIB_libevent is not set
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libpcap is not set
#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set
# FREETZ_LIB_libusb is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libintl is not set
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libftdi is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_libdevmapper is not set
FREETZ_LIB_libfreetz=y
#
# Compiler options
#
# FREETZ_DOWNLOAD_TOOLCHAIN is not set
FREETZ_BUILD_TOOLCHAIN=y
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
FREETZ_HOSTCC="gcc"
FREETZ_KERNEL_VERSION_2_6_13_1=y
# FREETZ_KERNEL_VERSION_2_6_19_2 is not set
FREETZ_KERNEL_VERSION="2.6.13.1"
FREETZ_TARGET_UCLIBC_VERSION_0_9_28=y
# FREETZ_TARGET_UCLIBC_VERSION_0_9_29 is not set
# FREETZ_TARGET_COMPILER_GCC_4_1_0_UCLIBC_0_9_28 is not set
# FREETZ_TARGET_COMPILER_GCC_4_1_1_UCLIBC_0_9_28 is not set
# FREETZ_TARGET_COMPILER_GCC_4_1_2_UCLIBC_0_9_28 is not set
# FREETZ_TARGET_COMPILER_GCC_4_2_0_UCLIBC_0_9_28 is not set
FREETZ_TARGET_COMPILER_GCC_4_2_1_UCLIBC_0_9_28=y
# FREETZ_TARGET_COMPILER_GCC_4_2_1_UCLIBC_0_9_29 is not set
FREETZ_TARGET_GCC_VERSION="4.2.1"
FREETZ_TARGET_UCLIBC_VERSION="0.9.28"
FREETZ_TARGET_BINUTILS_VERSION="2.17.50.0.17"
FREETZ_TARGET_UCLIBC_CONFIG_MOD=y
# FREETZ_TARGET_UCLIBC_CONFIG_8MB is not set
# FREETZ_TARGET_UCLIBC_CONFIG_4MB is not set
FREETZ_TARGET_UCLIBC_REF="mod"
# FREETZ_STATIC_TOOLCHAIN is not set
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_COMPILER_GCC_3_4_6=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.17.50.0.17"
# FREETZ_TARGET_TOOLCHAIN is not set
#
# GNU debugger (gdb)
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_GDB_SERVER is not set
# FREETZ_PACKAGE_GDB_HOST is not setsyslog of my other box, based on 2810 with another USB stick, which was automounted correctly:
Code:
Dec 2 18:29:34 fritz user.info kernel: kdsld: PPP led: off (value=0)
Dec 2 18:29:34 fritz user.info kernel: hub 1-0:1.0: USB hub found
Dec 2 18:29:34 fritz user.info kernel: hub 1-0:1.0: 1 port detected
Dec 2 18:29:34 fritz user.info kernel: avm_net_trace: New net trace device 'WLAN' registered with minor 0.
Dec 2 18:29:34 fritz user.info kernel: usb 1-1: new full speed USB device using ahci and address 2
Dec 2 18:29:34 fritz user.err kernel: [avm_power] : ethernet port 0 status 2
Dec 2 18:29:34 fritz user.err kernel: [avm_power] : ethernet port 1 status 1
Dec 2 18:29:34 fritz user.err kernel: [avm_power] : ethernet port 2 status 1
Dec 2 18:29:34 fritz user.err kernel: [avm_power] : ethernet port 3 status 1
Dec 2 18:29:34 fritz user.notice kernel: SCSI subsystem initialized
Dec 2 18:29:34 fritz user.info kernel: Initializing USB Mass Storage driver...
Dec 2 18:29:34 fritz user.info kernel: USB Mass Storage device (0951:1607) detected...
Dec 2 18:29:34 fritz user.info kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Dec 2 18:29:34 fritz user.warn kernel: [ohio_vlynq_init] device 0
Dec 2 18:29:34 fritz user.warn kernel: [ohio_vlynq_startup_link]
Dec 2 18:29:34 fritz user.warn kernel: [setup_irq]: irq 29 irqaction->handler 0x9400592c (vlynq_interrupt+0x0/0x34 )
Dec 2 18:29:34 fritz user.warn kernel: [setup_irq]: irq 79 irqaction->handler 0xc030e39c (tiwlan_ddaVlynqIsr+0x0/0x28 [tiap] )
Dec 2 18:29:34 fritz user.debug kernel: usb-storage: device found at 2
Dec 2 18:29:34 fritz user.debug kernel: usb-storage: waiting for device to settle before scanning
Dec 2 18:29:34 fritz user.info kernel: usbcore: registered new driver usb-storage
Dec 2 18:29:34 fritz user.info kernel: USB Mass Storage support registered.
Dec 2 18:29:34 fritz user.info kernel: [avm_power]#### boostVoltage: DSP Core voltage set to 1,65 V ####
Dec 2 18:29:34 fritz user.info kernel: userman: LAN Client Internet-Accounting and Blocking
Dec 2 18:29:34 fritz user.warn kernel: userman: device registerd with major=228
Dec 2 18:29:34 fritz user.info kernel: userman: init ok
Dec 2 18:29:34 fritz user.notice kernel: Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
Dec 2 18:29:34 fritz user.notice kernel: Type: Direct-Access ANSI SCSI revision: 02
Dec 2 18:29:34 fritz user.warn kernel: [setup_irq]: irq 27 irqaction->handler 0x940f1c7c (cpmac_main_isr+0x0/0x78 )
Dec 2 18:29:34 fritz user.notice kernel: SCSI device sda: 7856128 512-byte hdwr sectors (4022 MB)
Dec 2 18:29:34 fritz user.err kernel: [cpmac] cpmac_main_ioctl, unknown ioctl 35142
Dec 2 18:29:34 fritz user.info kernel: device eth0 entered promiscuous mode
Dec 2 18:29:34 fritz user.info kernel: device cpmac0 entered promiscuous mode
Dec 2 18:29:34 fritz user.info kernel: lan: port 1(eth0) entering learning state
Dec 2 18:29:34 fritz user.info kernel: lan: topology change detected, propagating
Dec 2 18:29:34 fritz user.info kernel: lan: port 1(eth0) entering forwarding state
Dec 2 18:29:34 fritz user.info kernel: device tiwlan0 entered promiscuous mode
Dec 2 18:29:34 fritz user.info kernel: lan: port 2(tiwlan0) entering learning state
Dec 2 18:29:34 fritz user.info kernel: lan: topology change detected, propagating
Dec 2 18:29:34 fritz user.info kernel: lan: port 2(tiwlan0) entering forwarding state
Dec 2 18:29:34 fritz user.info kernel: device wdsup0 entered promiscuous mode
Dec 2 18:29:34 fritz user.info kernel: lan: port 3(wdsup0) entering learning state
Dec 2 18:29:34 fritz user.info kernel: lan: topology change detected, propagating
Dec 2 18:29:34 fritz user.info kernel: lan: port 3(wdsup0) entering forwarding state
Dec 2 18:29:34 fritz user.info kernel: device wdsdw0 e
Dec 2 18:29:34 fritz user.info kernel: ntered promiscuous mode
Dec 2 18:29:34 fritz user.info kernel: lan: port 4(wdsdw0) entering learning state
Dec 2 18:29:34 fritz user.info kernel: lan: topology change detected, propagating
Dec 2 18:29:34 fritz user.info kernel: lan: port 4(wdsdw0) entering forwarding state
Dec 2 18:29:34 fritz user.info kernel: device wdsdw1 entered promiscuous mode
Dec 2 18:29:34 fritz user.info kernel: lan: port 5(wdsdw1) entering learning state
Dec 2 18:29:34 fritz user.info kernel: lan: topology change detected, propagating
Dec 2 18:29:34 fritz user.info kernel: lan: port 5(wdsdw1) entering forwarding state
Dec 2 18:29:34 fritz user.info kernel: device wdsdw2 entered promiscuous mode
Dec 2 18:29:34 fritz user.info kernel: lan: port 6(wdsdw2) entering learning state
Dec 2 18:29:34 fritz user.info kernel: lan: topology change detected, propagating
Dec 2 18:29:34 fritz user.info kernel: lan: port 6(wdsdw2) entering forwarding state
Dec 2 18:29:34 fritz user.info kernel: device wdsdw3 entered promiscuous mode
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] cpmac_main_dev_send, drop non vlan pkt (78 bytes)
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] cpmac_main_dev_send, drop, 1, 0
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] [cpphy_if_tx_complete] 78 bytes dropped (9)
Dec 2 18:29:34 fritz user.info kernel: lan: port 7(wdsdw3) entering learning state
Dec 2 18:29:34 fritz user.info kernel: lan: topology change detected, propagating
Dec 2 18:29:34 fritz user.info kernel: lan: port 7(wdsdw3) entering forwarding state
Dec 2 18:29:34 fritz user.notice kernel: sda: Write Protect is off
Dec 2 18:29:34 fritz user.debug kernel: sda: Mode Sense: 23 00 00 00
Dec 2 18:29:34 fritz user.err kernel: sda: assuming drive cache: write through
Dec 2 18:29:34 fritz user.notice kernel: SCSI device sda: 7856128 512-byte hdwr sectors (4022 MB)
Dec 2 18:29:34 fritz user.notice kernel: sda: Write Protect is off
Dec 2 18:29:34 fritz user.debug kernel: sda: Mode Sense: 23 00 00 00
Dec 2 18:29:34 fritz user.err kernel: sda: assuming drive cache: write through
Dec 2 18:29:34 fritz user.info kernel: sda: sda1
Dec 2 18:29:34 fritz user.notice kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Dec 2 18:29:34 fritz user.info kernel: lan: duplicate address detected!
Dec 2 18:29:34 fritz user.notice kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Dec 2 18:29:34 fritz user.debug kernel: usb-storage: device scan complete
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] cpmac_main_dev_send, drop non vlan pkt (70 bytes)
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] cpmac_main_dev_send, drop, 1, 0
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] [cpphy_if_tx_complete] 70 bytes dropped (9)
Dec 2 18:29:34 fritz user.info kernel: kdsld: lan:
Dec 2 18:29:34 fritz user.info kernel: kdsld: 0: eth.proto 0x0800 ip.proto 17 udp.dport 5060 (act 1)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 0: eth.proto 0x0800 ip.proto 17 udp.dport 53 (act 11)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 0: eth.proto 0x0800 ip.proto 6 ip.len <= 800 tcp.dport 80 (act 12)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 0: eth.proto 0x0800 ip.proto 6 ip.len <= 800 tcp.dport 8080 (act 12)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 0: eth.proto 0x0800 ip.proto 6 ip.len <= 800 tcp.dport 3128 (act 12)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 0: eth.proto 0x0800 ip.proto 6 ip.len <= 64 (act 10)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 0: eth.proto 0x0800 ip.proto 1 (act 13)
Dec 2 18:29:34 fritz user.info kernel: kdsld: lan-optim:
Dec 2 18:29:34 fritz user.info kernel: kdsld: 0: eth.proto 0x0800 (act 1)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 1: ip.proto 17 (act 1)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 2: udp.dport 5060 (act 1)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 2: udp.dport 53 (act 11)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 1: ip.proto 6 (act 12)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 2: ip.len <= 800 (act 12)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 3: tcp.dport 80 (act 12)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 3: tcp.dport 8080 (act 12)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 3: tcp.dport 3128 (act 12)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 2: ip.len <= 64 (act 10)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 1: ip.proto 1 (act 13)
Dec 2 18:29:34 fritz user.warn kernel: [tiatm] DSL in Sync
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] cpmac_main_dev_send, drop non vlan pkt (70 bytes)
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] cpmac_main_dev_send, drop, 1, 0
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] [cpphy_if_tx_complete] 70 bytes dropped (9)
Dec 2 18:29:34 fritz user.debug kernel: wdsup0: no IPv6 routers present
Dec 2 18:29:34 fritz user.debug kernel: tiwlan0: no IPv6 routers present
Dec 2 18:29:34 fritz user.info kernel: kdsld: showtime
Dec 2 18:29:34 fritz user.info kernel: kdsld: VCC 0: registered (0/35)
Dec 2 18:29:34 fritz user.info kernel: kdsld: 0: VPI/VCI 0/35 RBE internet xxxx (24,14) mc upstream
Dec 2 18:29:34 fritz user.info kernel: kdsld: internet: set_rcv_ipaddr: xxxx
Dec 2 18:29:34 fritz user.info kernel: kdsld: dsl: registered
Dec 2 18:29:34 fritz user.info kernel: kdsld: VCC 0: iface internet dslencap RBE pcapencap ETHER llctype ether
Dec 2 18:29:34 fritz user.info kernel: kdsld: VCC 0: pcapencap RFC1843
Dec 2 18:29:34 fritz user.info kernel: kdsld: no vpnconnections configured
Dec 2 18:29:34 fritz user.info kernel: kdsld: setup done.
Dec 2 18:29:34 fritz user.info kernel: kdsld: DHCPC: internet: state init
Dec 2 18:29:34 fritz user.info kernel: kdsld: DHCPC: internet: state init, got event discover-sent
Dec 2 18:29:34 fritz user.info kernel: kdsld: DHCPC: internet: state selecting
Dec 2 18:29:34 fritz user.info kernel: kdsld_token_thread: start
Dec 2 18:29:34 fritz user.debug kernel: wdsdw1: no IPv6 routers present
Dec 2 18:29:34 fritz user.debug kernel: wdsdw0: no IPv6 routers present
Dec 2 18:29:34 fritz user.debug kernel: wdsdw2: no IPv6 routers present
Dec 2 18:29:34 fritz user.info kernel: kdsld: DHCPC: internet: state selecting, got event offer-received
Dec 2 18:29:34 fritz user.info kernel: kdsld: DHCPC: internet: state selecting, got event request-sent
Dec 2 18:29:34 fritz user.info kernel: kdsld: DHCPC: internet: state requesting
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] cpmac_main_dev_send, drop non vlan pkt (70 bytes)
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] cpmac_main_dev_send, drop, 1, 0
Dec 2 18:29:34 fritz user.warn kernel: [cpmac] [cpphy_if_tx_complete] 70 bytes dropped (9)
Dec 2 18:29:34 fritz user.info kernel: kdsld: DHCPC: internet: state requesting, got event ack-received
Dec 2 18:29:34 fritz user.info kernel: kdsld: DHCPC: internet: state bound (7200)
Dec 2 18:29:34 fritz user.info kernel: kdsld: internet: set_snd_ipaddr: 212.238.145.132
Dec 2 18:29:34 fritz user.info kernel: kdsld: internet: connected
Dec 2 18:29:34 fritz user.debug kernel: mcfw: forward enabled (vcc0: 00:1f:3f:b0:7f:5c, vlan 0, pppoe 0)
Dec 2 18:29:34 fritz user.info kernel: kdsld: PPP led: on (value=1)
Dec 2 18:29:34 fritz user.debug kernel: wdsdw3: no IPv6 router
Dec 2 18:29:34 fritz user.info kernel: s present
Dec 2 18:29:34 fritz user.warn kernel: AR7WDT: System Init UEberwachung abgeschlossen (194660 ms noch verfuegbar)
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_cpuclock: norm_power_rate=100 act_rate=99 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=0 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dspclock: norm_power_rate=100 act_rate=100 mul=154 div=10 offset=974 NormP=2514 mW -> SumNormP=2514 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_systemclock: norm_power_rate=100 act_rate=83 mul=65 div=10 offset=1793 NormP=2443 mW -> SumNormP=4957 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_wlan: norm_power_rate=100 act_rate=-2147483636 mul=84 div=10 offset=100 NormP=940 mW -> SumNormP=5897 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnnt: norm_power_rate=100 act_rate=-2147483648 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=5997 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_isdnte: norm_power_rate=100 act_rate=0 mul=1 div=1 offset=0 NormP=100 mW -> SumNormP=6097 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_analog: norm_power_rate=300 act_rate=0 mul=141 div=10 offset=100 NormP=4330 mW -> SumNormP=10427 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dect: norm_power_rate=100 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=10427 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_ethernet: norm_power_rate=467 act_rate=50331912 mul=1 div=1 offset=50 NormP=517 mW -> SumNormP=10944 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_dsl: norm_power_rate=100 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=10944 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_host: norm_power_rate=500 act_rate=100 mul=55 div=10 offset=50 NormP=2800 mW -> SumNormP=13744 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_usb_client: norm_power_rate=0 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=13744 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_charge: norm_power_rate=446 act_rate=0 mul=0 div=1 offset=0 NormP=0 mW -> SumNormP=13744 mW
Dec 2 18:29:34 fritz user.debug kernel: [avm_power] pm_ressourceinfo_scriptparse: powerdevice_loadrate: norm_power_rate=100 act_rate=99 mul=29 div=10 offset=-17 NormP=273 mW -> SumNormP=14017 mW
Dec 2 18:29:34 fritz user.info kernel: SysRq : Changing Loglevel
Dec 2 18:29:34 fritz user.warn kernel: Loglevel set to 4
Dec 2 18:29:34 fritz user.debug kernel: cpmac0: no IPv6 routers present
Dec 2 18:29:34 fritz user.warn kernel:
Dec 2 18:29:34 fritz user.warn kernel: [ubik2_debug] eof_sync =1
Dec 2 18:29:34 fritz user.debug kernel: eth0: no IPv6 routers present
Dec 2 18:29:41 fritz authpriv.info dropbear[852]: Running in background
Dec 2 18:29:43 fritz user.info kernel: lan: port 4(wdsdw0) entering disabled state
Dec 2 18:29:45 fritz user.err telefon[650]: set initial telefon time from linux time to 18:29 2.12 2008!
Dec 2 18:29:49 fritz user.info kernel: lan: port 4(wdsdw0) entering learning state
Dec 2 18:29:49 fritz user.info kernel: lan: topology change detected, propagating
Dec 2 18:29:49 fritz user.info kernel: lan: port 4(wdsdw0) entering forwarding state
Dec 2 18:29:59 fritz user.debug kernel: wdsdw0: no IPv6 routers present
Dec 2 18:30:41 fritz local0.info partition[602]: /dev/sda1: Superblock last mount time is in the future. FIXED. /dev/sda1: Superblock last write time is in the future. FIXED. /dev/sda1 has filesystem last checked time in the future, check forced. /dev/sda1: 39/4915
Dec 2 18:30:42 fritz user.info kernel: kjournald starting. Commit interval 5 seconds
Dec 2 18:30:42 fritz user.warn kernel: EXT3-fs warning: checktime reached, running e2fsck is recommended
Dec 2 18:30:42 fritz user.info kernel: EXT3 FS on sda1, internal journal
Dec 2 18:30:42 fritz user.info kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 2 18:30:42 fritz local0.info partition[602]: mounted '/dev/sda1' on '/var/media/ftp/uStora1' with 'noatime,nodiratime'
Dec 2 18:30:42 fritz local0.info partition[602]: not starting any services on '/var/media/ftp/uStora1'
Dec 2 18:31:44 fritz user.warn kernel: [speedup] -> 62.5 MHz
Dec 2 18:33:36 fritz user.warn kernel: [speedup] -> 125 MHz
Dec 2 18:34:40 fritz user.warn kernel: [speedup] -> 62.5 MHz
Dec 2 18:35:25 fritz user.warn kernel: [speedup] -> 125 MHz
Dec 2 18:36:26 fritz user.warn kernel: /proc/tffs: info request: success
.