Die Ausgangssituation ist eine andere: Ich hab ja kein Freetz auf der Fritzbox sondern möchte nur das Modul reinbekommen.
[Gelöst] FW 6.50 für 7490 in Trunk rev. 13490 - keine Auswahlmöglichkeit
- Ersteller JohnDoe42
- Erstellt am
Die Ausgangssituation ist eine andere: Ich hab ja kein Freetz auf der Fritzbox sondern möchte nur das Modul reinbekommen.
@bmaehr: nimm modfs und packe es in die FW. Alles weitere steht detailliert im entsprechenden Thread.
PeterPawn
IPPF-Urgestein
- Mitglied seit
- 10 Mai 2006
- Beiträge
- 15,268
- Punkte für Reaktionen
- 1,750
- Punkte
- 113
Auch nichts zu sehen in einer seriellen Console oder im "panic log" (nachdem man wieder ein funktionierendes System gestartet hat)?
Das ganze neue TFFS-3.0 hat gerade für das Protokollieren von "panic conditions" einen neuen ordentlich aufgeräumten Zweig erhalten, der eigentlich auch dann noch funktionieren sollte, wenn z.B. kein Root-Dateisystem gefunden wird - weil er "an der dev-Struktur vorbei" arbeitet und direkt auf den Speicher für das TFFS zugreift.
Alles andere, was ich mir mal zur Protokollierung gebaut habe, um auch bei Boxen ohne vorherige Lötarbeiten vor dem "pivot_root" noch irgendetwas von einem Fehler zu sehen, schreibt auch bloß in eine yaffs2-Partition (config) ein entsprechendes Protokoll, das man dann hinterher aus einem anderen lauffähigen System auswerten kann. Aber das setzt zumindest mal voraus, daß überhaupt das root-FS gefunden wird und wenigstens die Abarbeitung der /etc/inittab in Angriff genommen wird.
Das ganze neue TFFS-3.0 hat gerade für das Protokollieren von "panic conditions" einen neuen ordentlich aufgeräumten Zweig erhalten, der eigentlich auch dann noch funktionieren sollte, wenn z.B. kein Root-Dateisystem gefunden wird - weil er "an der dev-Struktur vorbei" arbeitet und direkt auf den Speicher für das TFFS zugreift.
Alles andere, was ich mir mal zur Protokollierung gebaut habe, um auch bei Boxen ohne vorherige Lötarbeiten vor dem "pivot_root" noch irgendetwas von einem Fehler zu sehen, schreibt auch bloß in eine yaffs2-Partition (config) ein entsprechendes Protokoll, das man dann hinterher aus einem anderen lauffähigen System auswerten kann. Aber das setzt zumindest mal voraus, daß überhaupt das root-FS gefunden wird und wenigstens die Abarbeitung der /etc/inittab in Angriff genommen wird.
PeterPawn
IPPF-Urgestein
- Mitglied seit
- 10 Mai 2006
- Beiträge
- 15,268
- Punkte für Reaktionen
- 1,750
- Punkte
- 113
Schade ... dann heißt es eben warten, bis sich mal jemand mit einer bestückten Seriellen findet, der ebenfalls einen eigenen Kernel verwenden will ... max. kann man noch darüber nachdenken, wie man das jemandem schmackhafter machen könnte. Eine Idee hätte ich da schon, das wäre der Backport für das overlayfs - für Freetz sicherlich anstelle der bisher irgendwo existierenden mini_fo- oder unionfs-Lösung eine interessante Alternative, denn das ist ja der Weg, der in spätere 3er-Kernel dann "offiziell" eingezogen ist und damit ist die einmal erlernte Herangehensweise beim overlayfs dann auch mehrfach verwendbar (bei mini_fo und unionfs ja eher nicht der Fall).
Habe ich gemacht. Ich benötige CURL inkl. libs, also quasi statisch. Ich möchte das Paket ohne Freetz auf der FritzBox laufen lassen. Geht das?
XC
XC
PeterPawn
IPPF-Urgestein
- Mitglied seit
- 10 Mai 2006
- Beiträge
- 15,268
- Punkte für Reaktionen
- 1,750
- Punkte
- 113
Was ist denn "quasi statisch"?
Wenn Du (die inzwischen mögliche) Option zum Einstellen des Pfades für die Bibliotheken benutzt (ein aktuelles "checkout" ist also Pflicht), kannst Du das so einrichten/planen, daß am Ende das zusätzliche Verzeichnis für curl auf Deiner FRITZ!Box ebenfalls/zuerst nach solchen Bibliotheken durchsucht wird und dann lassen sich selbst Bibliotheken verwenden, die ansonsten bei AVM in abweichender Version/Konfiguration vorliegen.
Da Du ja ohnehin dann andere Modifikationen vornehmen mußt (irgendwo muß curl ja verwendet/gestartet werden), kannst Du an dieser Stelle dann die Binärdateien für die Programme und die Bibliotheken (das Kommando "ldd" zeigt an, welche Bibliotheken so ein Programm benötigt) in Deine eigene Firmware kopieren.
Für das "wirklich statische Linken" (also eine einzelne Binärdatei, die keine Bibliotheken benötigt und dann aber entsprechend groß ist und bei Security-Problemen in einer der gelinkten Bibliotheken ebenfalls komplett neu erstellt werden muß - das ist gerade bei curl als TLS-Client eher nicht so selten notwendig) müßte man die Build-Einstellungen ändern.
Ob das am Ende eine einzelne zusätzliche Einstellung ist, weil Freetz selbst da "autoconf" für das Paket verwendet (und das selbst auch die Erzeugung einer solchen statisch gelinkten Version unterstützt) oder ob man selbst Hand anlegen muß (wenn es überhaupt unterstützt/sinnvoll ist, denn wenn die Software eine Bibliothek unbedingt per dlopen() zur Laufzeit laden will, muß die eben auch passend vorliegen), hängt vom jeweiligen Paket ab.
Diese eher "allgemeinen Ausführungen" bringen Dich zwar in Bezug auf curl nicht direkt weiter (ich müßte mir das Paket auch erst selbst ansehen), aber vielleicht helfen sie Dir ja dabei, das curl-Paket in Freetz unter diesem Aspekt zu untersuchen. Wenn da eine Einstellung "statisch linken" in der Freetz-Konfiguration bereits enthalten sein sollte, hättest Du vermutlich nicht gefragt.
Wenn Du (die inzwischen mögliche) Option zum Einstellen des Pfades für die Bibliotheken benutzt (ein aktuelles "checkout" ist also Pflicht), kannst Du das so einrichten/planen, daß am Ende das zusätzliche Verzeichnis für curl auf Deiner FRITZ!Box ebenfalls/zuerst nach solchen Bibliotheken durchsucht wird und dann lassen sich selbst Bibliotheken verwenden, die ansonsten bei AVM in abweichender Version/Konfiguration vorliegen.
Da Du ja ohnehin dann andere Modifikationen vornehmen mußt (irgendwo muß curl ja verwendet/gestartet werden), kannst Du an dieser Stelle dann die Binärdateien für die Programme und die Bibliotheken (das Kommando "ldd" zeigt an, welche Bibliotheken so ein Programm benötigt) in Deine eigene Firmware kopieren.
Für das "wirklich statische Linken" (also eine einzelne Binärdatei, die keine Bibliotheken benötigt und dann aber entsprechend groß ist und bei Security-Problemen in einer der gelinkten Bibliotheken ebenfalls komplett neu erstellt werden muß - das ist gerade bei curl als TLS-Client eher nicht so selten notwendig) müßte man die Build-Einstellungen ändern.
Ob das am Ende eine einzelne zusätzliche Einstellung ist, weil Freetz selbst da "autoconf" für das Paket verwendet (und das selbst auch die Erzeugung einer solchen statisch gelinkten Version unterstützt) oder ob man selbst Hand anlegen muß (wenn es überhaupt unterstützt/sinnvoll ist, denn wenn die Software eine Bibliothek unbedingt per dlopen() zur Laufzeit laden will, muß die eben auch passend vorliegen), hängt vom jeweiligen Paket ab.
Diese eher "allgemeinen Ausführungen" bringen Dich zwar in Bezug auf curl nicht direkt weiter (ich müßte mir das Paket auch erst selbst ansehen), aber vielleicht helfen sie Dir ja dabei, das curl-Paket in Freetz unter diesem Aspekt zu untersuchen. Wenn da eine Einstellung "statisch linken" in der Freetz-Konfiguration bereits enthalten sein sollte, hättest Du vermutlich nicht gefragt.
Hallo PeterPawn,
hat funktioniert
. Hatte den Haken unterm Paket "CURL" statisch linken übersehen.
Trotzdem VIELEN DANK!
Gruß
XC
hat funktioniert
. Hatte den Haken unterm Paket "CURL" statisch linken übersehen.Trotzdem VIELEN DANK!
Gruß
XC
Ich möchte das Thema "replace kernel" bei der 113.06.51 auf der 7490 noch mal aufgreifen. Ich habe den aktuellen Trunk 13704 (mit meiner Standardkonfiguration, kann ich ggf. nachreichen oder durch Minimalkonf. ersetzen) einmal mit und einmal ohne replace kernel gebaut und geflasht. Auf der seriellen Konsole der 7490 sind dann folgende Ausgaben zu beobachten:
Ohne replace kernel:
Code:
[ 466.310000] kdsld: kdsld_vcc_preunregister: *
[ 469.620000] AVM_WATCHDOG_disable()
[ 471.780000] SQUASHFS error: Major/Minor mismatch, older Squashfs 0.0 filesystems are unsupported
[ 481.110000] [avm_urlader_env_set_variable] opening ID 0x198 for writing
[ 481.210000] SysRq : Emergency Sync
[ 481.220000] SysRq : Emergency Remount R/O
[ 484.520000] [avm_power] PowerManagmentRelease(0x8f20e200)
[ 484.810000] __gmac_dev_event: ath0: 0x9 (NETDEV_GOING_DOWN), pid=3553 (hostapd)
[ 484.860000] __gmac_dev_event: ath0: 0x2 (NETDEV_DOWN), pid=3553 (hostapd)
[ 485.220000] __gmac_dev_event: ath1: 0x9 (NETDEV_GOING_DOWN), pid=3553 (hostapd)
[ 485.270000] __gmac_dev_event: ath1: 0x2 (NETDEV_DOWN), pid=3553 (hostapd)
[ 486.620000] get_ul_manager: error: ll_handle= (null)
[ 486.680000] [avm_power] PowerManagmentRelease(0x8f152800)
[ 486.690000] Res
ROM VER: 1.1.4
CFG 05
** START
RVEC bf200000
[-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/]
(AVM) EVA Revision: 1.1964 Version: 2964
(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (1) 3 0x0-0x740D
[FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 16 sectors a 64kB)
[NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW
[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
.Atheros 8030/35 detected
Eva_AVM >##..................................................
Lantiq xDSL CPE VR9
phym = 10000000, mem = 10000000, max_pfn = 00010000
Reserving memory for CP1 @0xb0000000, size 0x00000000
plat_device_tree_setup: AVM hardware subrevision 5
plat_device_tree_setup: using Fallback device-tree of AVM hardware subrevision 0
DT: d0 0d fe ed 00 00 14 36
[ 0.000000] Linux version 3.10.73 (jwetter@EmbeddedVM) (gcc version 4.8.3 (Buildroot 2014.08) ) #1 SMP Wed Feb 3 16:21:53 CET 2016
[ 0.000000] [env_init] 0x81018160[0]
[ 0.000000] [env_init] 0x810181a0[1]
[ 0.000000] [env_init] 0x810182a0[2]
[ 0.000000] [env_init] switch to ram location
[ 0.000000] [init_avm_kernel_config] AVM Kernel Config (ptr 80825000)
[ 0.000000] [init_avm_kernel_config] AVM Kernel Config: module memory entry
[ 0.000000] [init_avm_kernel_config] AVM Kernel Config: version info entry
[ 0.000000] [init_avm_kernel_config] AVM Kernel Config: device-tree for subrev 0 found
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] [module-alloc] use 0xaa1000 bytes at 0x81205000
[ 0.000000] PERCPU: Embedded 7 pages/cpu @81caa000 s7072 r8192 d13408 u32768
[ 0.000000] Kernel command line: console=ttyS0,115200n8r nor_size=0MB sflash_size=1024KB nand_size=512MB ethaddr=34:31:C4:74:64:1A
[ 0.000000] [NAND] nand_size = 0x20000000
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 239676k/262144k available (5704k kernel code, 22468k reserved, 2691k data, 300k init, 0k highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:181
[ 0.000000] SRSConf0 0x3feffbfe: SRS1: 0xffffffff, SRS2 0xffffffff, SRS3 0xffffffff
[ 0.000000] Lantiq ICU driver, version 3.0.1, (c) 2001-2011 Lantiq Deutschland GmbH
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.020000] Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Security Framework initialized
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] CPU1 revision is: 00019556 (MIPS 34Kc)
[ 0.170000] Brought up 2 CPUs
[ 0.170000] [yield_context_init] cpu=1 tc=2 mask=300
[ 0.180000] [yield_context_init] cpu=0 tc=3 mask=410
[ 0.180000] devtmpfs: initialized
[ 0.200000] pinctrl core: initialized pinctrl subsystem
[ 0.200000] Creating Config Table
[ 0.200000] [avm_generate_hw_config_table_from_device_tree] gpio_cnt: 46
[ 0.210000] NET: Registered protocol family 16
[ 0.220000] Reboot Status is: Soft-Reboot
[ 0.220000] [TFFS3_Early_Init] called
[ 0.230000] [avmnet] [avmnet_cfg_init] Driver version: 6.221 - Revision 1496:3426 - Mi 3. Feb 16:21:21 CET 2016
[ 0.850000] Lantiq PCIe Root Complex driver, version 2.0.0, (c) 2001-2011 Lantiq Deutschland GmbH
[ 0.900000] bio: create slab <bio-0> at 0
[ 0.900000] PCI host bridge to bus 0000:00
[ 0.910000] pci_bus 0000:00: root bus resource [mem 0x1c000000-0x1cffffff]
[ 0.910000] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
[ 0.920000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.930000] ifx_pcie_rc_class_early_fixup port 0: fixed pcie host bridge to pci-pci bridge
[ 0.940000] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
[ 0.940000] pci 0000:01:00.0: BAR 0: assigned [mem 0x1c000000-0x1c001fff 64bit]
[ 0.950000] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.960000] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]
[ 0.970000] NET: Registered protocol family 8
[ 0.970000] NET: Registered protocol family 20
[ 0.970000] Switching to clocksource MIPS
[ 1.040000] NET: Registered protocol family 2
[ 1.040000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 1.050000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 1.050000] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.060000] TCP: reno registered
[ 1.060000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.070000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.080000] NET: Registered protocol family 1
[ 1.090000] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[ 1.090000] Lantiq CGU driver, version 1.1.32, (c) 2001-2011 Lantiq Deutschland GmbH
[ 1.120000] IFX DMA driver, version ifxmips_dma_core.c:v1.0.17, (c) 2009 Infineon Technologies AG
[ 1.120000] skb_shared_size:184
[ 1.130000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.140000] fuse init (API version 7.22)
[ 1.140000] msgmni has been set to 468
[ 1.150000] io scheduler noop registered (default)
[ 1.490000] ttyS0 at MMIO 0x1e100c00 (irq = 107) is a PORT_IFX_ASC
[ 1.500000] ifx_usif_uart_init: uart_register_driver failed
[ 1.510000] avm_net_trace: Up and running.
[ 1.510000] [loadcontrol] set auto - scale=1
[ 1.520000] Lantiq Thermal Sensor driver, version 1.0.3, (c) 2001-2011 Lantiq Deutschland GmbH
[ 1.530000] ifx_pmu_init: Major 244
[ 1.530000] Lantiq PMU driver, version 1.2.6, (c) 2001-2011 Lantiq Deutschland GmbH
[ 1.540000] Lantiq GPIO driver, version 1.3.2, (c) 2001-2011 Lantiq Deutschland GmbH
[ 1.540000] Infineon Technologies RCU driver version 1.0.7
[ 1.560000] loop: module loaded
[ 1.570000] nbd: registered device at major 43
[ 1.600000] [HSNAND] Hardware-ECC activated
[ 1.600000] ONFI param page 0 valid
[ 1.600000] ONFI flash detected
[ 1.610000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron MT29F4G08ABADAWP), 512MiB, page size: 2048, OOB size: 64
[ 1.620000] Scanning device for bad blocks
[ 1.960000] Creating 6 MTD partitions on "ifx_hsnand":
[ 1.960000] 0x000000000000-0x000000400000 : "reserved-kernel"
[ 1.970000] 0x000000400000-0x000003400000 : "reserved-filesystem"
[ 1.980000] 0x000003400000-0x000003800000 : "kernel"
[ 1.990000] 0x000003800000-0x000006800000 : "filesystem"
[ 2.000000] 0x000006800000-0x000006a00000 : "config"
[ 2.000000] 0x000006a00000-0x000020000000 : "nand-filesystem"
[ 2.010000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_hsnand
[ 2.020000] [TFFS3_Register_Panic_CB] registering panic callback for mtd ifx_sflash
[ 2.030000] Creating 3 MTD partitions on "ifx_sflash":
[ 2.030000] 0x000000000000-0x000000040000 : "urlader"
[ 2.040000] 0x000000040000-0x0000000a0000 : "tffs (1)"
[ 2.040000] 0x0000000a0000-0x000000100000 : "tffs (2)"
[ 2.050000] Lantiq SPI flash driver, version 2.0.1, (c) 2001-2011 Lantiq Deutschland GmbH
[ 2.060000] tun: Universal TUN/TAP device driver, 1.6
[ 2.060000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 2.070000] SWAPI: Registered character device [switch_api] with major no [81]
[ 2.080000] i2c /dev entries driver
[ 2.080000] cpuidle: using governor ladder
[ 2.080000] cpuidle: using governor menu
[ 2.090000] AVM PA 4.3.14 2015-10-21
[ 2.090000] AVM PA skb pktinfo at offset 136 size 196
[ 2.100000] [loadcontrol]module avm_pa registered
[ 2.100000] ipip: IPv4 over IPv4 tunneling driver
[ 2.110000] TCP: cubic registered
[ 2.110000] NET: Registered protocol family 10
[ 2.120000] sit: IPv6 over IPv4 tunneling driver
[ 2.120000] NET: Registered protocol family 17
[ 2.120000] l2tp_core: L2TP core driver, V2.0
[ 2.130000] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 2.130000] l2tp_netlink: L2TP netlink interface
[ 2.140000] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 2.140000] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 2.150000] 8021q: 802.1Q VLAN Support v1.8
[ 2.160000] Key type dns_resolver registered
[ 2.160000] <ifx_fix_timing>
[ 2.170000] [TFFS3_Init] No storage module registered, trying legacy fallback
[ 2.170000] [TFFS3_Register_LGCY] Called
[ 2.180000] [TFFS3_LGCY_Configure] Called
[ 2.180000] [TFFS3_LGCY_Setup] using mtd7(tffs (1)), mtd8(tffs (2))
[ 2.190000] [TFFS3_LGCY_Setup] mtd "tffs (1)": segment value 12
[ 2.190000] [TFFS3_LGCY_Setup] mtd "tffs (2)": segment value 11
[ 2.200000] [TFFS3_LGCY_Setup] Using segment 12 (avail: 12 + 11)
[ 2.200000] [TFFS3_LGCY_Setup] mtd7 size=0x60000
[ 2.210000] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0)
[ 2.210000] [rescan_segment] Called with mode=2
[ 2.210000] TFFS: Clearing index for update
[ 2.220000] Adam2 environment variables API installed.
[ 2.230000] [simple-profiling]: 2 performance counters implemented, NEW_34K
[ 2.240000] Enable Performance Counter 0 for Data cache load/stores (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable)
[ 2.250000] Setup tcs=0x2 current_tc_mask=0x2, reg=0
[ 2.250000] [simple-profiling]: 2 performance counters implemented, NEW_34K
[ 2.260000] Enable Performance Counter 1 for Data cache load/store misses (User-Mode enabled Supervisor-Mode enabled Kernel-Mode enabled Exeption-Mode disable)
[ 2.280000] Setup tcs=0x2 current_tc_mask=0x2, reg=1
[ 2.280000] {avmnet_cfg_netinit}
[ 2.280000] [avmnet] No config found for HWRev 185, HWSubRev 5, Profile-ID 0, trying base config for HWSubRev
[ 2.290000] [avmnet] No config found for HWRev 185, HWSubRev 5, trying base config for HWRev
[ 2.300000] [avmnet] [avmnet_swi_7port_init] Init on module swi_vr9 called.
[ 2.630000] [ppe_eth_init] init_hw()
[ 2.630000] [init_hw] ppe_hw_init=0xff successful
[ 2.630000] [ppe_eth_init] ifx_proc_file_create()
[ 2.640000] [ppe_eth_init] dma_setup_init()
[ 2.640000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48
[ 2.650000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48
[ 6.060000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth0): 34:31:c4:74:64:1a
[ 6.070000] avmnet: avm_pa: register pid eth0
[ 6.080000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth1): 34:31:c4:74:64:1b
[ 6.090000] avmnet: avm_pa: register pid eth1
[ 6.090000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth2): 34:31:c4:74:64:1f
[ 6.100000] avmnet: avm_pa: register pid eth2
[ 6.100000] [avmnet_set_macaddr] Setup Mac Addr for Device(eth3): 34:31:c4:74:64:20
[ 6.110000] avmnet: avm_pa: register pid eth3
[ 6.110000] [avmnet_set_macaddr] Setup Mac Addr for Device(wasp): 00:de:ad:be:ef:ca
[ 6.120000] [avmnet_create_netdevice] setup offload_cpu_link on device wasp
[ 6.130000] avmnet: avm_pa: register pid wasp
[ 6.180000] SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock3
[ 6.190000] yaffs: dev is 32505859 name is "mtdblock3" ro
[ 6.190000] yaffs: passed flags ""
[ 6.220000] VFS: Mounted root (yaffs filesystem) readonly on device 31:3.
[ 6.230000] devtmpfs: mounted
[ 6.230000] Freeing unused kernel memory: 300K (80835000 - 80880000)
[ 7.170000] TFFS Name Table L
[ 7.280000] yaffs: dev is 32505860 name is "mtdblock4" rw
[ 7.290000] yaffs: passed flags ""
[ 9.360000] [avm_urlader_env_set_variable] opening ID 0x1ae for writing
[ 9.470000] led_modul_Fritz_Box_HW185: module license '
[ 9.470000] (C) Copyright 2012 by AVM
[ 9.470000] ' taints kernel.
[ 9.480000] Disabling lock debugging due to kernel taint
[ 9.480000] [module-alloc-by-name] give 0x1b000 bytes at 0x81205000 to module 'led_modul_Fritz_Box_HW185' (0xa86000 bytes left)
[ 9.500000] [LED] use GPIO 45 for 'gpio_avm_led_power'
[ 9.510000] [LED] use GPIO 47 for 'gpio_avm_led_internet'
[ 9.510000] [LED] use GPIO 36 for 'gpio_avm_led_festnetz'
[ 9.520000] [LED] use GPIO 35 for 'gpio_avm_led_wlan'
[ 9.520000] [LED] use GPIO 33 for 'gpio_avm_led_info'
[ 9.530000] [LED] use GPIO 46 for 'gpio_avm_led_info_red'
[ 9.530000] [BUTTON] use GPIO 29 for 'gpio_avm_button_wlan'
[ 9.540000] [BUTTON] use GPIO 1 for 'gpio_avm_button_dect'
[ 9.550000] AVM_WATCHDOG: System Init UEberwachung 240 Sekunden
[ 10.030000] [module-alloc-by-name] give 0x3000 bytes at 0x81220000 to module 'rtc_avm' (0xa83000 bytes left)
[ 10.040000] rtc-avm rtc-avm.0: rtc core: registered avm as rtc0
[ 10.040000] [avm-rtc]: avm_rtc_probe: register: ret=0x8f6ea000
[ 10.050000] [avm-rtc]: avm_rtc_probe: success
[ 10.370000] [module-alloc-by-name] give 0xe000 bytes at 0x81223000 to module 'Piglet_noemif' (0xa75000 bytes left)
[ 10.380000] [piglet]use settings for 185(7 gpios from hw_config)
[ 10.380000]
[ 10.500000] [piglet]patch_dectfw: c0785000, totallen = 47835(badb)
[ 10.510000] [piglet]patch_dectfw: patch_adress: a0 max_len: 26 with Version 2 Len: 17
[ 10.510000] [piglet]patch_dectfw: RFPI tag found 0271528eb8
[ 10.520000] [piglet]dect_loader144xx: slow-bootmode
[ 11.330000] system-load 4 loadavg 0.15 0.3 0.1 - 38 tasks:61 % curr:busybox(5 %) max:init(41 %, pid:1), readytorun: 3, pgfault 1601/s (max 2 avg 1.9)
[ 13.790000] [piglet]dect144xx_file_process: upload of '/lib/modules/dectfw_secondlevel_441.hex' successfull
[ 15.830000] [piglet]bitfile for autodetect '/lib/modules/bitfile_isdn.bit'
[ 15.830000] [piglet]try to preload in progress-context: /lib/modules/bitfile_isdn.bit
[ 16.580000] [piglet] bitfile 72761 bytes done
[ 21.680000] [piglet]use preload[0] /lib/modules/bitfile_pots.bit
[ 22.390000] [piglet] bitfile 72761 bytes done
[ 22.390000] [piglet]-> POTS-Mode
[ 22.460000] [piglet]TDM: FS: 8005 Hz CLK: 2047720 Hz
[ 22.990000] yaffs: dev is 32505861 name is "mtdblock5" rw
[ 23.000000] yaffs: passed flags ""
[ 23.030000] system-load 100 % loadavg 0.28 0.6 0.2 - 38 tasks:10 % curr:swapper/0(0 %) max:migration/1(9 %, pid:12), readytorun: 0, pgfault 957/s (max 1 avg 0.0)
[ 24.070000] [module-alloc-by-name] give 0x68000 bytes at 0x81231000 to module 'pcmlink' (0xa0d000 bytes left)
[ 24.250000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x8767)
[ 24.260000] {micron_read_hwecc} page 0x8767 Sec 3 1 Berr 0 OOB 0 ECC
[ 24.520000] [module-alloc-by-name] give 0xcb000 bytes at 0x81299000 to module 'isdn_fbox_fon5' (0x942000 bytes left)
[ 24.580000] [capi_oslib]avm_stack_attach: cpu1 -> cpu1
[ 25.030000] [module-alloc-by-name] give 0x69000 bytes at 0x81364000 to module 'capi_codec' (0x8d9000 bytes left)
[ 25.070000] : Codecs_Init register a /dev/debug handler[ 25.240000] [module-alloc-by-name] give 0x4b000 bytes at 0x813cd000 to module 'avm_dect' (0x88e000 bytes left)
[ 25.290000] [module-alloc-by-name] give 0x5000 bytes at 0x81418000 to module 'dect_io' (0x889000 bytes left)
[ 25.300000] DECT_CTRL
[ 25.300000] Frame-Violations 0.0 % (diff=0) from 5724 triggers irqs max-time between frame-trigger 132 us
[ 25.300000] Frame-XDU/OVR 41
[ 25.300000] yield-triggers: 5823 Irqs: 178 (triggered: 182)
[ 25.300000] bf100000:PCM_CTRLR 00004000 bf100004:PCM_CTRLX 00000000
[ 25.300000] bf100008:PCM_STATR 00000000 bf10000c:PCM_STATX 80008000
[ 25.300000] bf100010:PCM_FREQ(0x0) dis DCL: 0
[ 25.300000] bf100014:PCM_CFG(0000c101) en DS=1 PCMXO=1 DCK=0 XS=0 RS=0 ND=0 SF=0 PCMRO=1
[ 25.300000] bf100018:PCM_EN 7fff bf10001c:PCM_TEST 0000
[ 25.300000] bf100020:PCM_MODE 7fff bf100024:PCM_STAT 00000003
[ 25.300000] [00] bf100028 CFG: 00000000 RH 0 RTS: 00 XH 0 XTS 00
[ 25.300000] [01] bf10002c CFG: 00020002 RH 0 RTS: 02 XH 0 XTS 02
[ 25.300000] [02] bf100030 CFG: 00040004 RH 0 RTS: 04 XH 0 XTS 04
[ 25.300000] [03] bf100034 CFG: 00060006 RH 0 RTS: 06 XH 0 XTS 06
[ 25.300000] [04] bf100038 CFG: 00080008 RH 0 RTS: 08 XH 0 XTS 08
[ 25.300000] [05] bf10003c CFG: 000a000a RH 0 RTS: 0a XH 0 XTS 0a
[ 25.300000] [06] bf100040 CFG: 000c000c RH 0 RTS: 0c XH 0 XTS 0c
[ 25.300000] [07] bf100044 CFG: 000e000e RH 0 RTS: 0e XH 0 XTS 0e
[ 25.300000] [08] bf100048 CFG: 00100010 RH 0 RTS: 10 XH 0 XTS 10
[ 25.300000] [09] bf10004c CFG: 00120012 RH 0 RTS: 12 XH 0 XTS 12
[ 25.300000] [10] bf100050 CFG: 00140014 RH 0 RTS: 14 XH 0 XTS 14
[ 25.300000] [11] bf100054 CFG: 00160016 RH 0 RTS: 16 XH 0 XTS 16
[ 25.300000] [12] bf100058 CFG: 00180018 RH 0 RTS: 18 XH 0 XTS 18
[ 25.300000] [13] bf10005c CFG: 001a001a RH 0 RTS: 1a XH 0 XTS 1a
[ 25.300000] [14] bf100060 CFG: 001c001c RH 0 RTS: 1c XH 0 XTS 1c
[ 25.300000] bf101010: YIELD_EN 0x10
[ 29.350000] [module-alloc-by-name] give 0x12000 bytes at 0x8141d000 to module 'fat' (0x877000 bytes left)
[ 29.400000] [module-alloc-by-name] give 0x4000 bytes at 0x8142f000 to module 'vfat' (0x873000 bytes left)
[ 29.640000] udevd[1679]: starting version 175
[ 29.680000] [avm_urlader_env_set_variable] opening ID 0x1aa for writing
[ 29.920000] [module-alloc-by-name] give 0x2000 bytes at 0x81433000 to module 'usb_common' (0x871000 bytes left)
[ 30.080000] [module-alloc-by-name] give 0x35000 bytes at 0x81435000 to module 'usbcore' (0x83c000 bytes left)
[ 30.110000] usbcore: registered new interface driver usbfs
[ 30.120000] usbcore: registered new interface driver hub
[ 30.130000] usbcore: registered new device driver usb
[ 30.390000] [module-alloc-by-name] give 0x1b000 bytes at 0x8146a000 to module 'xhci_hcd' (0x821000 bytes left)
[ 30.400000] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 30.410000] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 30.500000] xHCI: PORT POWER on, delay 200ms[ 30.710000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 30.710000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 30.720000] usb usb1: Product: xHCI Host Controller
[ 30.720000] usb usb1: Manufacturer: Linux 3.10.73 xhci_hcd
[ 30.730000] usb usb1: SerialNumber: 0000:01:00.0
[ 30.740000] hub 1-0:1.0: USB hub found
[ 30.740000] hub 1-0:1.0: 2 ports detected
[ 30.740000] avm_net_trace: New net trace device 'usb1' registered with minor 161.
[ 30.750000] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 30.750000] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 30.760000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 30.770000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 30.780000] usb usb2: Product: xHCI Host Controller
[ 30.780000] usb usb2: Manufacturer: Linux 3.10.73 xhci_hcd
[ 30.790000] usb usb2: SerialNumber: 0000:01:00.0
[ 30.800000] hub 2-0:1.0: USB hub found
[ 30.800000] hub 2-0:1.0: 2 ports detected
[ 30.800000] AVM: disable USB3 bus#2 port#1 config=1
[ 30.810000] avm_net_trace: New net trace device 'usb2' registered with minor 162.
[ 31.080000] system-load 5 loadavg 0.63 0.14 0.5 - 59 tasks:7 % curr:udevadm(0 %) max:kworker/1:1H(2 %, pid:1268), readytorun: 6, pgfault 1353/s (max 2 avg 2.0)
[ 33.040000] system-load 100 % loadavg 0.63 0.14 0.5 - 77 tasks:26 % curr:kworker/u4:0(0 %) max:udevadm(3 %, pid:1726), readytorun: 11, pgfault 3982/s (max 8 avg 0.5)
[ 36.270000] [module-alloc-by-name] give 0x2e000 bytes at 0x81485000 to module 'mei_vr9' (0x7f3000 bytes left)
[ 36.300000] [dsl_mei] Lantiq (VRX) DSL CPE MEI driver, version 1.4.4, (c) 2013 Lantiq Deutschland GmbH
[ 36.300000] [dsl mei] tried to set GDBG Level to 4
[ 36.300000]
[dsl mei] debug_level=4, Global UsrDbgLevel=4 MEI_DRV UsrDbgLevel=4 MEI_MEI_ACCESS UsrDbgLevel=4
[ 36.320000] [dsl mei] debug_level=4, Global IntDbgLevel=4 MEI_DRV IntDbgLevel=4 MEI_MEI_ACCESS IntDbgLevel=4
[ 36.320000]
[ 36.330000] [dsl_vr9] AVM_MEI_PowerUpDSLSubsystem enable power domain 'DSL + DFE'
[ 36.340000] [AVM_MEI_PowerUpDSLSubsystem] power up 'PPE TC, PPE EMA, LEDC, DFEV1, DFEV0'
[ 36.370000] [dsl_vr9] AVM_MEI_PowerUpDSLSubsystem unreset 'DSL, DFE, AFE, VOICE, DSLTC, ARC'
[ 36.550000] [module-alloc-by-name] give 0x4d000 bytes at 0x814b3000 to module 'dsl_vr9' (0x7a6000 bytes left)
[ 36.790000] [module-alloc-by-name] give 0x27000 bytes at 0x81500000 to module 'ifxmips_ppa_datapath_vr9_e5' (0x77f000 bytes left)
[ 36.820000] drivers/net/ethernet/avm/avm_cpmac/switch/ifx/vr9/ifxmips_ppa_datapath_vr9_e5.c:3031:init_local_variables: [init_local_variables] g_eth_wan_mode=0
[ 36.820000]
[ 36.830000] drivers/net/ethernet/avm/avm_cpmac/switch/ifx/vr9/ifxmips_ppa_datapath_vr9_e5.c:3090:init_local_variables: g_wan_itf=0x80, g_wanqos_en=8
[ 36.830000]
[ 36.860000] CPU_TO_WAN_TX_DESC_BASE[0] =0xbe227400
[ 36.870000] avmnet: avm_pa: register pid ptm_vr9
[ 36.870000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48
[ 36.880000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48
[ 38.500000] [module-alloc-by-name] give 0x1ae000 bytes at 0x81527000 to module 'kdsldmod' (0x5d1000 bytes left)
[ 38.650000] kdsldmod: init start (Feb 3 2016 16:31:31) sizeof(struct sk_buff)=448
[ 38.660000] userman: device registerd (userman_url) with major=231
[ 38.670000] kdsld: ttychannel: ldisc 8 registered
[ 38.670000] PCP_NL: PCP netlink interface (multicast group 1)
[ 38.680000] kdsldmod: init done (Feb 3 2016 16:31:31)
[ 43.670000] system-load 100 % loadavg 0.68 0.17 0.6 - 76 tasks:42 % curr:dsl_control(0 %) max:ctlmgr(12 %, pid:2872), readytorun: 6, pgfault 3031/s (max 5 avg 0.1)
[ 43.670000] system-load 6 loadavg 0.68 0.17 0.6 - 76 tasks:0 % curr:version(0 %) max:rcu_sched(0 %, pid:9), readytorun: 3, pgfault 2851/s (max 10 avg 5.4)
[ 44.830000] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 44.840000] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 44.850000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 45.370000] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 45.890000] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 46.890000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 46.890000] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 46.910000] IPv6: ADDRCONF(NETDEV_UP): guest: link is not ready
[ 46.920000] [dma_device_write] auto open tx_chan_no:2
[ 46.920000] IPv6: ADDRCONF(NETDEV_UP): guest: link is not ready
[ 46.930000] IPv6: ADDRCONF(NETDEV_UP): guest: link is not ready
[ 48.890000] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 48.890000] DECT_CTRL
[ 48.890000] Frame-Violations 0.0 % (diff=2944) from 188702 triggers irqs max-time between frame-trigger 140 us
[ 48.890000] Frame-XDU/OVR 1722
[ 48.890000] yield-triggers: 194530 Irqs: 6005 (triggered: 6025)
[ 48.890000] bf100000:PCM_CTRLR 00004000 bf100004:PCM_CTRLX 00000000
[ 48.890000] bf100008:PCM_STATR 00000000 bf10000c:PCM_STATX 80008000
[ 48.890000] bf100010:PCM_FREQ(0x0) dis DCL: 0
[ 48.890000] bf100014:PCM_CFG(0000c101) en DS=1 PCMXO=1 DCK=0 XS=0 RS=0 ND=0 SF=0 PCMRO=1
[ 48.890000] bf100018:PCM_EN 7fff bf10001c:PCM_TEST 0000
[ 48.890000] bf100020:PCM_MODE 7fff bf100024:PCM_STAT 00000003
[ 48.890000] [00] bf100028 CFG: 00000000 RH 0 RTS: 00 XH 0 XTS 00
[ 48.890000] [01] bf10002c CFG: 00020002 RH 0 RTS: 02 XH 0 XTS 02
[ 48.890000] [02] bf100030 CFG: 00040004 RH 0 RTS: 04 XH 0 XTS 04
[ 48.890000] [03] bf100034 CFG: 00060006 RH 0 RTS: 06 XH 0 XTS 06
[ 48.890000] [04] bf100038 CFG: 00080008 RH 0 RTS: 08 XH 0 XTS 08
[ 48.890000] [05] bf10003c CFG: 000a000a RH 0 RTS: 0a XH 0 XTS 0a
[ 48.890000] [06] bf100040 CFG: 000c000c RH 0 RTS: 0c XH 0 XTS 0c
[ 48.890000] [07] bf100044 CFG: 000e000e RH 0 RTS: 0e XH 0 XTS 0e
[ 48.890000] [08] bf100048 CFG: 00100010 RH 0 RTS: 10 XH 0 XTS 10
[ 48.890000] [09] bf10004c CFG: 00120012 RH 0 RTS: 12 XH 0 XTS 12
[ 48.890000] [10] bf100050 CFG: 00140014 RH 0 RTS: 14 XH 0 XTS 14
[ 48.890000] [11] bf100054 CFG: 00160016 RH 0 RTS: 16 XH 0 XTS 16
[ 48.890000] [12] bf100058 CFG: 00180018 RH 0 RTS: 18 XH 0 XTS 18
[ 48.890000] [13] bf10005c CFG: 001a001a RH 0 RTS: 1a XH 0 XTS 1a
[ 48.890000] [14] bf100060 CFG: 001c001c RH 0 RTS: 1c XH 0 XTS 1c
[ 48.890000] bf101010: YIELD_EN 0x10
[ 48.950000] DECT_CTRL
[ 48.950000] Frame-Violations 0.0 % (diff=0) from 465 triggers irqs max-time between frame-trigger 127 us
[ 48.950000] Frame-XDU/OVR 360
[ 48.950000] yield-triggers: 194891 Irqs: 6006 (triggered: 6025)
[ 48.950000] bf100000:PCM_CTRLR 00004000 bf100004:PCM_CTRLX 00000000
[ 48.950000] bf100008:PCM_STATR 00000000 bf10000c:PCM_STATX 80008000
[ 48.950000] bf100010:PCM_FREQ(0x0) dis DCL: 0
[ 48.950000] bf100014:PCM_CFG(0000c101) en DS=1 PCMXO=1 DCK=0 XS=0 RS=0 ND=0 SF=0 PCMRO=1
[ 48.950000] bf100018:PCM_EN 7fff bf10001c:PCM_TEST 0000
[ 48.950000] bf100020:PCM_MODE 7fff bf100024:PCM_STAT 00000003
[ 48.950000] [00] bf100028 CFG: 00000000 RH 0 RTS: 00 XH 0 XTS 00
[ 48.950000] [01] bf10002c CFG: 00020002 RH 0 RTS: 02 XH 0 XTS 02
[ 48.950000] [02] bf100030 CFG: 00040004 RH 0 RTS: 04 XH 0 XTS 04
[ 48.950000] [03] bf100034 CFG: 00060006 RH 0 RTS: 06 XH 0 XTS 06
[ 48.950000] [04] bf100038 CFG: 00080008 RH 0 RTS: 08 XH 0 XTS 08
[ 48.950000] [05] bf10003c CFG: 000a000a RH 0 RTS: 0a XH 0 XTS 0a
[ 48.950000] [06] bf100040 CFG: 000c000c RH 0 RTS: 0c XH 0 XTS 0c
[ 48.950000] [07] bf100044 CFG: 000e000e RH 0 RTS: 0e XH 0 XTS 0e
[ 48.950000] [08] bf100048 CFG: 00100010 RH 0 RTS: 10 XH 0 XTS 10
[ 48.950000] [09] bf10004c CFG: 00120012 RH 0 RTS: 12 XH 0 XTS 12
[ 48.950000] [10] bf100050 CFG: 00140014 RH 0 RTS: 14 XH 0 XTS 14
[ 48.950000] [11] bf100054 CFG: 00160016 RH 0 RTS: 16 XH 0 XTS 16
[ 48.950000] [12] bf100058 CFG: 00180018 RH 0 RTS: 18 XH 0 XTS 18
[ 48.950000] [13] bf10005c CFG: 001a001a RH 0 RTS: 1a XH 0 XTS 1a
[ 48.950000] [14] bf100060 CFG: 001c001c RH 0 RTS: 1c XH 0 XTS 1c
[ 48.950000] bf101010: YIELD_EN 0x10
[ 50.250000] [module-alloc-by-name] give 0x20000 bytes at 0x816d5000 to module 'aae' (0x5b1000 bytes left)
[ 50.280000] [wlan_config] Given config is:
[ 50.280000] [wlan_config] hw_interface=0 chip_type=8 (scorpion) offload=3 (full)
[ 50.290000] [wlan_config] hw_interface=1 chip_type=11 (peregrine) offload=3 (full)
[ 50.300000] [wlan_config] hwrev=185 hwsubrev=5 maca=34:31:c4:74:64:1a
[ 50.300000] [WLAN_HEARTBEAT] start
[ 50.310000] [WLAN_COM] INFO: using dev 'wasp' (src=00:de:ad:be:ef:ca, dst=ff:ff:ff:ff:ff:ff)
[ 50.320000] [wlan_eeprom] Calibration data blocks found = 2
[ 50.330000] [wlan_eeprom] EEPROM #1, type "AR93xx/AR95xx":
[ 50.340000] [wlan_eeprom] Customer data="AVM7490_CAL1_V5"
[ 50.340000] [wlan_eeprom] regDmn=0x8114 - patching to 0
[ 50.350000] [wlan_eeprom] Build with ART2 4.4
[ 50.350000] [wlan_eeprom] EEPROM #2, type "QCA98xx":
[ 50.360000] [wlan_eeprom] Customer data="AVM7490_CAL2_V4"
[ 50.360000] [wlan_eeprom] regDmn=0x8114 - patching to 0
[ 50.370000] avm_net_trace: New net trace device 'WLAN Management Traffic' registered with minor 128.
[ 50.380000] [WLAN_COM] avm_wlan_com_tx_thread start
[ 50.470000] IPv6: ADDRCONF(NETDEV_UP): wasp: link is not ready
[ 50.730000] [module-alloc-by-name] give 0x25000 bytes at 0x816f5000 to module 'adf' (0x58c000 bytes left)
[ 50.770000] [module-alloc-by-name] give 0x5000 bytes at 0x8171a000 to module 'hif_gmac' (0x587000 bytes left)
[ 50.790000] __gmac_dev_event: wasp: 0x5 (NETDEV_REGISTER), pid=3153 (busybox)
[ 50.800000] __gmac_dev_event: wasp: 0x1 (NETDEV_UP), pid=3153 (busybox)
[ 50.830000] [module-alloc-by-name] give 0x3000 bytes at 0x8171f000 to module 'athlogger' (0x584000 bytes left)
[ 50.860000] [module-alloc-by-name] give 0x5000 bytes at 0x81722000 to module 'fwd' (0x57f000 bytes left)
[ 50.960000] IPv6: ADDRCONF(NETDEV_CHANGE): wasp: link becomes ready
[ 50.960000] __gmac_dev_event: wasp: 0x4 (NETDEV_CHANGE), pid=14 (kworker/1:0)
[ 51.020000] [module-alloc-by-name] give 0x2b000 bytes at 0x81727000 to module 'atd' (0x554000 bytes left)
[ 53.260000] Re-init AVM Net Common Datapath Driver 7Port Switch ......
[ 53.270000] [init_hw] ppe_hw_init=0xff successful
[ 53.270000] atd_target_bootinit: 1st stage firmware download succeeded with status 0x0
[ 53.280000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48
[ 53.290000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48
[ 53.300000] [reinit_7port_common_eth] Succeeded!
[ 53.350000] drivers/net/ethernet/avm/avm_cpmac/switch/ifx/vr9/ifxmips_ppa_datapath_vr9_e5.c:3031:init_local_variables: [init_local_variables] g_eth_wan_mode=3
[ 53.350000]
[ 53.360000] drivers/net/ethernet/avm/avm_cpmac/switch/ifx/vr9/ifxmips_ppa_datapath_vr9_e5.c:3090:init_local_variables: g_wan_itf=0x2, g_wanqos_en=8
[ 53.360000]
[ 53.390000] CPU_TO_WAN_TX_DESC_BASE[0] =0xbe227400
[ 53.400000] avmnet: avm_pa: register pid ptm_vr9
[ 53.400000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown unicast frames 0x48
[ 53.410000] [avmnet] [avmnet_swi_7port_disable_learning] Configuring CPU-port to receive all unknown multicast frames 0x48
[ 53.480000] [module-alloc-by-name] give 0x14000 bytes at 0x81752000 to module 'ifxmips_ppa_hal_vr9_e5' (0x540000 bytes left)
[ 53.540000] [module-alloc-by-name] give 0x17000 bytes at 0x81766000 to module 'ifx_ppa_mini_sessions' (0x529000 bytes left)
[ 53.550000] [ifx_ppa_mini_session_init]
[ 53.550000] [ifx_ppa_mini_session_init] avm_pa sessionh_lookup table
[ 53.560000] max_lan_entries 192
[ 53.560000] max_wan_entries 192
[ 53.560000] max_mc_entries 32
[ 53.570000] max_bridging_entries 2048
[ 53.570000] max_ipv6_addr_entries 128
[ 53.580000] max_fw_queue 8
[ 53.580000] max_6rd_entries 4
[ 53.600000] [module-alloc-by-name] give 0x3000 bytes at 0x8177d000 to module 'ifx_ppa_mini_qos' (0x526000 bytes left)
[ 53.650000] kdsld: kdsld_vcc_preunregister: *
[ 53.660000] kdsld: nr_ipv4 0 nr_ipv6 0 nr_vpn 0
[ 53.780000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 53.790000] kdsld: kdsld_vcc_preregister: preata1
[ 53.790000] kdsld: kdsld_vcc_preregister: vcc->ifaces= (null)
[ 53.800000] kdsld: IPv6: internet: link local fe80::3631:c4ff:fe74:641e remote ::
[ 53.810000] kdsld: internet: set_rcv_ipaddr: 192.168.178.2
[ 53.840000] system-load 7 loadavg 1.19 0.30 0.10 - 85 tasks:61 % curr:busybox(0 %) max:ctlmgr(15 %, pid:2872), readytorun: 2, pgfault 2154/s (max 0 avg 0.0)
[ 53.970000] [dma_device_write] auto open tx_chan_no:2
[ 53.970000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 54.050000] Discovery pkt from wasp (1st Stage, 1)
[ 54.100000] system-load 100 % loadavg 1.19 0.30 0.10 - 83 tasks:2 % curr:usbcfgctl(0 %) max:usbcfgctl(0 %, pid:3238), readytorun: 4, pgfault 1594/s (max 15 avg 12.8)
[ 54.170000] Discovery pkt from wasp (1st Stage, 2)
[ 54.270000] Discovery pkt from wasp (1st Stage, 3)
[ 54.380000] Discovery pkt from wasp (1st Stage, 4)
[ 54.490000] Discovery pkt from wasp (1st Stage, 5)
[ 54.600000] Discovery pkt from wasp (1st Stage, 6)
[ 54.720000] Discovery pkt from wasp (1st Stage, 7)
[ 54.830000] Discovery pkt from wasp (1st Stage, 8)
[ 54.940000] Discovery pkt from wasp (1st Stage, 9)
[ 55.050000] Discovery pkt from wasp (1st Stage, 10)
[ 55.270000] fwd_tgt_firmware_download: waiting for rtnl_offload_read_lock
[ 55.280000] fwd_tgt_firmware_download: acquired rtnl_offload_read_lock
[ 56.330000] fwd_tgt_firmware_download: released rtnl_offload_read_lock
[ 56.340000] atd_configure_target: 2nd stage firmware download succeeded with status 0x0
[ 56.500000] [module-alloc-by-name] give 0x26000 bytes at 0x81780000 to module 'krtp' (0x500000 bytes left)
[ 57.050000] [module-alloc-by-name] give 0x3000 bytes at 0x817a6000 to module 'sch_tbf' (0x4fd000 bytes left)
[ 57.120000] [module-alloc-by-name] give 0x4000 bytes at 0x817a9000 to module 'sch_llq' (0x4f9000 bytes left)
[ 57.140000] sch_llq: Feb 3 2016 16:21:24
[ 57.160000] [module-alloc-by-name] give 0x4000 bytes at 0x817ad000 to module 'sch_sfq' (0x4f5000 bytes left)
[ 57.200000] kdsld: internet: set_snd_ipaddr: 85.204.137.82
[ 57.410000] kdsld: HOTSPOT: no hotspots configured
[ 57.410000] kdsld: VPN: no vpn connections configured
[ 62.740000] kdsld: IPv6: internet: gu 2a00:7660:0:1f::52 remote ::
[ 62.740000] kdsld: IPv6: internet: gu 2a00:7660:0:1f::52 remote ::
[ 64.020000] system-load 100 % loadavg 1.61 0.42 0.14 - 92 tasks:83 % curr:upnpd(5 %) max:dect_manager(17 %, pid:3273), readytorun: 2, pgfault 1287/s (max 0 avg 0.0)
[ 65.690000] SysRq : [ 69.210000] htc_control_msg_recv: received target ready message.
[ 69.230000] __gmac_dev_event: wifi0: 0x10 (NETDEV_POST_INIT), pid=19 (kworker/0:1)
[ 69.250000] __gmac_dev_event: wifi0: 0x5 (NETDEV_REGISTER), pid=19 (kworker/0:1)
[ 69.260000] __gmac_dev_event: wifi1: 0x10 (NETDEV_POST_INIT), pid=19 (kworker/0:1)
[ 69.270000] __gmac_dev_event: wifi1: 0x5 (NETDEV_REGISTER), pid=19 (kworker/0:1)
[ 70.090000] __gmac_dev_event: ath0: 0x10 (NETDEV_POST_INIT), pid=3095 (wland)
[ 70.110000] __gmac_dev_event: ath0: 0x5 (NETDEV_REGISTER), pid=3095 (wland)
[ 70.880000] __gmac_dev_event: ath0: 0xd (NETDEV_PRE_UP), pid=3679 (hostapd)
[ 71.160000] __gmac_dev_event: ath0: 0x1 (NETDEV_UP), pid=3679 (hostapd)
[ 71.180000] __gmac_dev_event: ath0: 0x9 (NETDEV_GOING_DOWN), pid=3095 (wland)
[ 71.240000] __gmac_dev_event: ath0: 0x2 (NETDEV_DOWN), pid=3095 (wland)
[ 71.380000] __gmac_dev_event: ath0: 0xd (NETDEV_PRE_UP), pid=3095 (wland)
[ 71.580000] __gmac_dev_event: ath0: 0x1 (NETDEV_UP), pid=3095 (wland)
[ 71.790000] __gmac_dev_event: ath1: 0x10 (NETDEV_POST_INIT), pid=3095 (wland)
[ 71.800000] __gmac_dev_event: ath1: 0x5 (NETDEV_REGISTER), pid=3095 (wland)
[ 72.650000] __gmac_dev_event: ath1: 0xd (NETDEV_PRE_UP), pid=3679 (hostapd)
[ 73.160000] WMI retry 1 (cmd=4, seq=106)
[ 73.900000] WMI recovered after 2 retries (cmd=4, seq=106)
[ 73.910000] __gmac_dev_event: ath1: 0x1 (NETDEV_UP), pid=3679 (hostapd)
[ 73.910000] wmi_rsp_callback: WMI response received twice (seqno=106)
[ 73.940000] __gmac_dev_event: ath1: 0x9 (NETDEV_GOING_DOWN), pid=3095 (wland)
[ 73.990000] __gmac_dev_event: ath1: 0x2 (NETDEV_DOWN), pid=3095 (wland)
[ 74.160000] __gmac_dev_event: ath1: 0xd (NETDEV_PRE_UP), pid=3095 (wland)
[ 74.390000] __gmac_dev_event: ath1: 0x1 (NETDEV_UP), pid=3095 (wland)
[ 76.370000] Target Reset Magic Patteren set in MDIO_REGS[]={[ 81.400000] atd_cfg_phyerr: WARNING: Unhandled id 0x801d, not converting endianness of out data!
[ 81.410000] wmi_rsp_callback: WARNING: WMI response expected but no data in reply (cmd=25)
[ 89.130000] [ifx_hsnand_command] read block is critical (column: 0x0 page: 0x9bf8)
[ 89.130000] {micron_read_hwecc} page 0x9bf8 Sec 1 1 Berr 0 OOB 0 ECCMit replace kernel:
Code:
ROM VER: 1.1.4
CFG 05
ç$ DC! ¤¥„„DC[-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\]
(AVM) EVA Revision: 1.1964 Version: 2964
(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (1) 3 0x0-0x740D
[FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 16 sectors a 64kB)
[NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW
[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
.Atheros 8030/35 detected
Eva_AVM >##.................................................
Lantiq xDSL CPE VR9
phym = 10000000, mem = 10000000, max_pfn = 00010000
Reserving memory for CP1 @0xb0000000, size 0x00000000
plat_device_tree_setup: AVM hardware subrevision 5
plat_device_tree_setup: Missing device-tree for AVM hardware subrevision 5
Lantiq xDSL CPE VR9
Lantiq xDSL CPE VR9Es scheint also ganz früh beim Bootvorgang etwas schiefzugehen. Meine Box bleibt dann stehen, es ist keine Rebootschleife zu beobachten.
Bitte gebt mir Bescheid, ob ich weitere Tests fahren soll.
Viele Grüße
PeterPawn
IPPF-Urgestein
- Mitglied seit
- 10 Mai 2006
- Beiträge
- 15,268
- Punkte für Reaktionen
- 1,750
- Punkte
- 113
Nach Ansicht des Protokolls klemmt es in der C-Funktion "plat_device_tree_setup" in der Datei "linux-3.10/arch/mips/lantiq/common/ifxmips_setup.c".
Dort wird anhand der Angabe "HWSubRevision" im Urlader-Environment eine Liste der verbauten Hardware (inkl. entsprechender "Beschreibungen", an welchen Adressen da welche Steuerregister usw. liegen) gesucht, beim AVM-Kernel wird offenbar der Eintrag für Deine HWSubRevision 5 nicht gefunden, was dann zu einem Fallback zur nächst kleineren vorhandenen Version führt.
Aus irgendeinem Grund steht also in dem selbst gebauten Kernel in der Tabelle "avm_kernel_config_device_tree" offenbar kein einziger Eintrag, denn sonst würde der Fallback-Mechanismus ja spätestens bei HWSubRevision 0 etwas finden.
Da muß man also jetzt genauer nachsehen, warum dieser Eintrag fehlt ... komme ich aber frühestens am Nachmittag zu, im Moment habe ich für eine ausführlichere Suche keine Zeit.
Da es offenbar auch nicht nur ein falscher Eintrag bei SubRevision 5 ist (dann käme die "missing"-Meldung ja nicht), hilft es auch nicht weiter, die HWSubRevision einfach einmal testweise auf 0 zu ändern ... vermutlich fehlt tatsächlich der Wert bei Index 0 bereits. Das kriegt man aber mit der Liste der Kernel-Symbole (avm_kernel_config_device_tree sollte global sichtbar sein) und dem Nachschauen im unkomprimierten Kernel heraus ... braucht auch seine Zeit.
In jedem Falle wäre die verwendete .config-Datei notwendig, wenn man das exakt nachstellen will ... es kann zwar auch sein, daß bei jeder beliebigen "replace kernel"-Konfiguration das Problem auftritt, aber wenn man ohnehin einen gesonderten Zweig für so einen "replace kernel"-Test aufmachen muß, kann man das auch gleich mit der richtigen Konfiguration machen. Also ... alles auf Anfang, minimales System bauen und dessen .config hier noch irgendwo anhängen, danke.
Dort wird anhand der Angabe "HWSubRevision" im Urlader-Environment eine Liste der verbauten Hardware (inkl. entsprechender "Beschreibungen", an welchen Adressen da welche Steuerregister usw. liegen) gesucht, beim AVM-Kernel wird offenbar der Eintrag für Deine HWSubRevision 5 nicht gefunden, was dann zu einem Fallback zur nächst kleineren vorhandenen Version führt.
Code:
void __init plat_device_tree_setup(void) {
struct boot_param_header *dtb;
if (IS_ENABLED(CONFIG_AVM_ENHANCED)) {
char *subrev_str;
int subrev = 0;
[COLOR="#FF0000"] subrev_str = prom_getenv("HWSubRevision");
[/COLOR] if (subrev_str) {
if (sscanf(subrev_str, "%u", &subrev) != 1)
subrev_str = NULL;
}
if (!subrev_str) {
prom_printf("%s: Unable to read AVM hardware "
"subrevision! Identity crisis... who am I?",
__func__);
}
prom_printf("%s: AVM hardware subrevision %d\n", __func__,
subrev);
if (subrev > avm_subrev_max) {
prom_printf("%s: Too many hardware subrevisions!\n", __func__);
panic("%s: Too many hardware subrevisions!\n", __func__);
}
[COLOR="#FF0000"] dtb = (struct boot_param_header *)avm_kernel_config_device_tree[subrev];[/COLOR]
[COLOR="#0000FF"] if(!dtb) { /* fallback auf nächst kleine SubRev */
int i;
for(i = subrev - 1; i >= 0; i--){
if(avm_kernel_config_device_tree[i]){
dtb = (struct boot_param_header *) avm_kernel_config_device_tree[i];
prom_printf("%s: using Fallback device-tree of AVM hardware "
"subrevision %d \n",
__func__, i);
break;
}
}
}
[/COLOR]
if (!dtb) {
prom_printf("%s: Missing device-tree for AVM hardware "
"subrevision %d\n", __func__, subrev);
[COLOR="#008000"] panic("%s: Missing device-tree for AVM hardware "
"subrevision %d\n", __func__, subrev);
[/COLOR] } else {
extern struct boot_param_header *initial_boot_params;
initial_boot_params = dtb;
prom_printf("DT: %02x %02x %02x %02x %02x %02x %02x %02x\n",
((unsigned char *)dtb)[0],
((unsigned char *)dtb)[1],
((unsigned char *)dtb)[2],
((unsigned char *)dtb)[3],
((unsigned char *)dtb)[4],
((unsigned char *)dtb)[5],
((unsigned char *)dtb)[6],
((unsigned char *)dtb)[7]);
}
}
__dt_setup_arch(dtb);
}Da muß man also jetzt genauer nachsehen, warum dieser Eintrag fehlt ... komme ich aber frühestens am Nachmittag zu, im Moment habe ich für eine ausführlichere Suche keine Zeit.
Da es offenbar auch nicht nur ein falscher Eintrag bei SubRevision 5 ist (dann käme die "missing"-Meldung ja nicht), hilft es auch nicht weiter, die HWSubRevision einfach einmal testweise auf 0 zu ändern ... vermutlich fehlt tatsächlich der Wert bei Index 0 bereits. Das kriegt man aber mit der Liste der Kernel-Symbole (avm_kernel_config_device_tree sollte global sichtbar sein) und dem Nachschauen im unkomprimierten Kernel heraus ... braucht auch seine Zeit.
In jedem Falle wäre die verwendete .config-Datei notwendig, wenn man das exakt nachstellen will ... es kann zwar auch sein, daß bei jeder beliebigen "replace kernel"-Konfiguration das Problem auftritt, aber wenn man ohnehin einen gesonderten Zweig für so einen "replace kernel"-Test aufmachen muß, kann man das auch gleich mit der richtigen Konfiguration machen. Also ... alles auf Anfang, minimales System bauen und dessen .config hier noch irgendwo anhängen, danke.
Danke für die schnelle Rückmeldung. Ich habe jetzt den aktuellen Trunk neu ausgecheckt und gegenüber der Standardeinstellung nur auf Firmware 06.51 geändert sowie replace kernel eingeschaltet. Hier ist die .config:
Code:
#
# Automatically generated file; DO NOT EDIT.
# Freetz Configuration
#
FREETZ_HAVE_DOT_CONFIG=y
#
# User competence ------------------------
#
# FREETZ_USER_LEVEL_BEGINNER is not set
# FREETZ_USER_LEVEL_ADVANCED is not set
FREETZ_USER_LEVEL_EXPERT=y
FREETZ_SHOW_ADVANCED=y
FREETZ_SHOW_EXPERT=y
#
# Hardware/Firmware ----------------------
#
# FREETZ_TYPE_300IP is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_WLAN is not set
# FREETZ_TYPE_W501V is not set
# FREETZ_TYPE_2170 is not set
#
# WLAN
#
# FREETZ_TYPE_3020 is not set
# FREETZ_TYPE_3030 is not set
# FREETZ_TYPE_3130 is not set
# FREETZ_TYPE_3131 is not set
# FREETZ_TYPE_3170 is not set
# FREETZ_TYPE_3270_V2 is not set
# FREETZ_TYPE_3270_V3 is not set
# FREETZ_TYPE_3272 is not set
# FREETZ_TYPE_3370 is not set
# FREETZ_TYPE_3390 is not set
# FREETZ_TYPE_3490 is not set
#
# WAN
#
# FREETZ_TYPE_4020 is not set
#
# Fon
#
# FREETZ_TYPE_5010 is not set
# FREETZ_TYPE_5050 is not set
# FREETZ_TYPE_5124 is not set
# FREETZ_TYPE_5140 is not set
#
# LTE
#
# FREETZ_TYPE_6810 is not set
# FREETZ_TYPE_6820 is not set
# FREETZ_TYPE_6840 is not set
# FREETZ_TYPE_6842 is not set
#
# Fon WLAN
#
# FREETZ_TYPE_7050 is not set
# FREETZ_TYPE_7112 is not set
# FREETZ_TYPE_7113 is not set
# FREETZ_TYPE_7140 is not set
# FREETZ_TYPE_7141 is not set
# FREETZ_TYPE_7150 is not set
# FREETZ_TYPE_7170 is not set
# FREETZ_TYPE_7240 is not set
# FREETZ_TYPE_7270_V1 is not set
# FREETZ_TYPE_7270_V2 is not set
# FREETZ_TYPE_7270_V3 is not set
# FREETZ_TYPE_7272 is not set
# FREETZ_TYPE_7312 is not set
# FREETZ_TYPE_7320 is not set
# FREETZ_TYPE_7330_XL is not set
# FREETZ_TYPE_7330_SL is not set
# FREETZ_TYPE_7340 is not set
# FREETZ_TYPE_7360_V1 is not set
# FREETZ_TYPE_7360_V2 is not set
# FREETZ_TYPE_7360_SL is not set
# FREETZ_TYPE_7362 is not set
# FREETZ_TYPE_7369 is not set
# FREETZ_TYPE_7390 is not set
# FREETZ_TYPE_7412 is not set
# FREETZ_TYPE_7430 is not set
FREETZ_TYPE_7490=y
#
# VDSL
#
# FREETZ_TYPE_7570 is not set
#
# Custom
#
# FREETZ_TYPE_CUSTOM is not set
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_EN is not set
# FREETZ_TYPE_LANG_EN_BE is not set
# FREETZ_TYPE_FIRMWARE_05_5X is not set
# FREETZ_TYPE_FIRMWARE_06_0X is not set
# FREETZ_TYPE_FIRMWARE_06_2X is not set
FREETZ_TYPE_FIRMWARE_06_5X=y
# FREETZ_TYPE_FIRMWARE_LABOR is not set
FREETZ_TYPE_FIRMWARE_FINAL=y
# FREETZ_TYPE_FIRMWARE_VULNERABLE is not set
FREETZ_TYPE_LANGUAGE="de"
#
# Original components --------------------
#
FREETZ_TARGET_IPV6_SUPPORT=y
FREETZ_REPLACE_KERNEL=y
FREETZ_REPLACE_KERNEL_IMPL=y
#
# Removal patches
#
#
# Removal patches ------------------------
#
# FREETZ_REMOVE_MULTI_ANNEX_FIRMWARE_DIFFS is not set
# FREETZ_REMOVE_PIGLET_V1_AVAILABLE is not set
# FREETZ_REMOVE_PIGLET_V2_AVAILABLE is not set
# FREETZ_REMOVE_PIGLET_ISDN_AVAILABLE is not set
# FREETZ_REMOVE_PIGLET_POTS_AVAILABLE is not set
# FREETZ_REMOVE_ASSISTANT is not set
# FREETZ_REMOVE_AHA is not set
# FREETZ_REMOVE_AURA_USB is not set
# FREETZ_REMOVE_MEDIASRV is not set
# FREETZ_REMOVE_NAS is not set
# FREETZ_REMOVE_MYFRITZ is not set
# FREETZ_REMOVE_FHEM is not set
# FREETZ_REMOVE_AVM_VPN is not set
#
# Remove brandings
#
# FREETZ_REMOVE_BRANDING_1und1 is not set
# FREETZ_REMOVE_BRANDING_avm is not set
# FREETZ_REMOVE_CAPIOVERTCP is not set
# FREETZ_REMOVE_CHRONYD is not set
# FREETZ_REMOVE_DECT is not set
# FREETZ_REMOVE_DSLD is not set
# FREETZ_REMOVE_SHOWDSLDSTAT is not set
FREETZ_REMOVE_DTRACE=y
# FREETZ_REMOVE_FTPD is not set
# FREETZ_REMOVE_HELP is not set
# FREETZ_REMOVE_RAMZSWAP is not set
# FREETZ_REMOVE_LSOF is not set
# FREETZ_REMOVE_FAT is not set
# FREETZ_REMOVE_NTFS is not set
# FREETZ_REMOVE_PRINTSERV is not set
# FREETZ_REMOVE_RUNCLOCK is not set
# FREETZ_REMOVE_SAMBA is not set
# FREETZ_REMOVE_SUPPORT is not set
# FREETZ_REMOVE_TR069 is not set
# FREETZ_REMOVE_UMTSD is not set
# FREETZ_REMOVE_UPNP is not set
# FREETZ_REMOVE_KIDS is not set
# FREETZ_REMOVE_QOS is not set
# FREETZ_REMOVE_AVM_E2FSPROGS is not set
# FREETZ_REMOVE_VOIPD is not set
# FREETZ_REMOVE_TELEPHONY is not set
# FREETZ_REMOVE_WEBDAV is not set
# FREETZ_REMOVE_WLAN is not set
#
# Other patches
#
#
# Web menu patches -----------------------
#
# FREETZ_PATCH_ATA is not set
# FREETZ_PATCH_GSMVOICE is not set
# FREETZ_PATCH_SIGNED is not set
# FREETZ_ENABLE_LED_DEACTIVATION is not set
#
# USB patches --------------------
#
# FREETZ_PATCH_MAXDEVCOUNT is not set
# FREETZ_MODIFY_UMTSD is not set
# FREETZ_CUSTOM_UDEV_RULES is not set
#
# Replacement patches --------------------
#
# FREETZ_REPLACE_DTRACE is not set
# FREETZ_REPLACE_ONLINECHANGED is not set
#
# Additional patches ---------------------
#
FREETZ_ADD_ETCSERVICES=y
# FREETZ_ENFORCE_URLADER_SETTINGS is not set
#
# Misc patches ---------------------------
#
# FREETZ_DISABLE_SERIAL_CONSOLE is not set
FREETZ_RESTORE_DEBUG_CFG_SUPPORT=y
#
# AVM daemons ----------------------------
#
# FREETZ_AVMDAEMON_DISABLE_IGD is not set
FREETZ_AVMDAEMON_DISABLE_NTP=y
# FREETZ_AVMDAEMON_DISABLE_IGM is not set
# FREETZ_AVMDAEMON_DISABLE_TR069 is not set
# FREETZ_AVMDAEMON_DISABLE_MULTIDPORTS is not set
#
# Additional components ------------------
#
#
# Packages
#
#
# Debug helpers
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_TARGET_TESTER is not set
# FREETZ_PACKAGE_USBUTILS is not set
#
# Packages
#
# FREETZ_PACKAGE_AICCU is not set
# FREETZ_PACKAGE_APACHE is not set
# FREETZ_PACKAGE_APACHE2 is not set
# FREETZ_PACKAGE_AUTOSSH is not set
# FREETZ_PACKAGE_AVAHI is not set
# FREETZ_PACKAGE_BASH is not set
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIND is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BIRD is not set
# FREETZ_PACKAGE_BITTWIST is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_BRIDGE_UTILS is not set
# FREETZ_PACKAGE_CALLMONITOR is not set
# FREETZ_PACKAGE_CCID is not set
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
# FREETZ_PACKAGE_CLASSPATH is not set
# FREETZ_PACKAGE_CNTLM is not set
# FREETZ_PACKAGE_COMGT is not set
# FREETZ_PACKAGE_CRYPTSETUP is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DANTE is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DBUS is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DECO is not set
# FREETZ_PACKAGE_DECRYPT_FRITZOS_CFG is not set
# FREETZ_PACKAGE_DIGITEMP is not set
# FREETZ_PACKAGE_DNS2TCP is not set
# FREETZ_PACKAGE_DNSMASQ is not set
# FREETZ_PACKAGE_DOSFSTOOLS is not set
# FREETZ_PACKAGE_DROPBEAR is not set
# FREETZ_PACKAGE_DTACH is not set
# FREETZ_PACKAGE_DVBSNOOP is not set
# FREETZ_PACKAGE_DVBSTREAM is not set
# FREETZ_PACKAGE_DVBTUNE is not set
# FREETZ_PACKAGE_E2FSPROGS is not set
#
# E-MailRelay (not available, needs libstdc++ as Standard C++ Library)
#
# FREETZ_PACKAGE_EMPTY is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FFMPEG is not set
# FREETZ_PACKAGE_FORTUNE is not set
# FREETZ_PACKAGE_FOWSR is not set
# FREETZ_PACKAGE_FSTYP is not set
# FREETZ_PACKAGE_FUSE is not set
# FREETZ_PACKAGE_GHOSTSCRIPT_FONTS is not set
# FREETZ_PACKAGE_GIT is not set
# FREETZ_PACKAGE_GNTPSEND is not set
# FREETZ_PACKAGE_GNU_MAKE is not set
# FREETZ_PACKAGE_GNUTLS is not set
# FREETZ_PACKAGE_GOCR is not set
# FREETZ_PACKAGE_GW6 is not set
# FREETZ_PACKAGE_HAPROXY is not set
FREETZ_PACKAGE_HASERL=y
# FREETZ_PACKAGE_HASERL_WITH_LUA is not set
# FREETZ_PACKAGE_HD_IDLE is not set
# FREETZ_PACKAGE_HOL is not set
# FREETZ_PACKAGE_HTML2TEXT is not set
# FREETZ_PACKAGE_HTOP is not set
# FREETZ_PACKAGE_HTPDATE is not set
# FREETZ_PACKAGE_HTTPRY is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
# FREETZ_PACKAGE_ICONV is not set
# FREETZ_PACKAGE_IFSTAT is not set
# FREETZ_PACKAGE_IFTOP is not set
# FREETZ_PACKAGE_IGMPPROXY is not set
# FREETZ_PACKAGE_IMAGEMAGICK is not set
# FREETZ_PACKAGE_INADYN_MT is not set
# FREETZ_PACKAGE_INADYN_OPENDNS is not set
FREETZ_PACKAGE_INETD=y
# FREETZ_PACKAGE_INETD_TIME is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IPSEC_TOOLS is not set
# FREETZ_PACKAGE_IPTRAF is not set
# FREETZ_PACKAGE_IPUTILS is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_ISC_DHCP is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_JS is not set
# FREETZ_PACKAGE_KNOCK is not set
# FREETZ_PACKAGE_LFTP is not set
# FREETZ_PACKAGE_LIGHTTPD is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MC is not set
# FREETZ_PACKAGE_MCABBER is not set
# FREETZ_PACKAGE_MEDIATOMB is not set
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MINICOM is not set
# FREETZ_PACKAGE_MINIDLNA is not set
# FREETZ_PACKAGE_MINI_SNMPD is not set
FREETZ_PACKAGE_MOD=y
FREETZ_PACKAGE_MOD_ETCSERVICES=y
FREETZ_PACKAGE_MODCGI=y
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_MTR is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NANO is not set
# FREETZ_PACKAGE_NC6 is not set
# FREETZ_PACKAGE_NCFTP is not set
# FREETZ_PACKAGE_NETATALK is not set
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NETPBM is not set
# FREETZ_PACKAGE_NETSNMP is not set
# FREETZ_PACKAGE_NFSROOT is not set
# FREETZ_PACKAGE_NFS_UTILS is not set
# FREETZ_PACKAGE_NGIRCD is not set
# FREETZ_PACKAGE_NMAP is not set
# FREETZ_PACKAGE_NOIP is not set
# FREETZ_PACKAGE_NZBGET is not set
# FREETZ_PACKAGE_OBEXFTP is not set
# FREETZ_PACKAGE_OIDENTD is not set
# FREETZ_PACKAGE_OPENCONNECT is not set
# FREETZ_PACKAGE_OPENDD is not set
# FREETZ_PACKAGE_OPENNTPD is not set
#
# OpenSSH
#
# FREETZ_PACKAGE_OPENSSH_sshd is not set
# FREETZ_PACKAGE_OPENSSH_ssh is not set
# FREETZ_PACKAGE_OPENSSH_scp is not set
# FREETZ_PACKAGE_OPENSSH_CLIENTUTILS is not set
# FREETZ_PACKAGE_OPENSSH_KEYUTILS is not set
# FREETZ_PACKAGE_OPENSSH_sftp is not set
# FREETZ_PACKAGE_OPENSSH_sftp_server is not set
# FREETZ_PACKAGE_OPENSSL is not set
# FREETZ_PACKAGE_OPENVPN is not set
# FREETZ_PACKAGE_OWFS is not set
# FREETZ_PACKAGE_PCSC_LITE is not set
# FREETZ_PACKAGE_PHONEBOOK_TOOLS is not set
# FREETZ_PACKAGE_PHP is not set
# FREETZ_PACKAGE_PINGTUNNEL is not set
# FREETZ_PACKAGE_POLIPO is not set
# FREETZ_PACKAGE_PORTMAP is not set
# FREETZ_PACKAGE_PPP is not set
# FREETZ_PACKAGE_PRIVATEKEYPASSWORD is not set
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_PYLOAD is not set
# FREETZ_PACKAGE_PYTHON is not set
# FREETZ_PACKAGE_QUAGGA is not set
# FREETZ_PACKAGE_RADVD is not set
# FREETZ_PACKAGE_RCAPID is not set
# FREETZ_PACKAGE_RIPMIME is not set
# FREETZ_PACKAGE_RRDTOOL is not set
# FREETZ_PACKAGE_RSYNC is not set
# FREETZ_PACKAGE_RTMPDUMP is not set
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_RUSH is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SAMBA is not set
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_SER2NET is not set
# FREETZ_PACKAGE_SHELLINABOX is not set
# FREETZ_PACKAGE_SIPROXD is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SLANG is not set
# FREETZ_PACKAGE_SLURM is not set
# FREETZ_PACKAGE_SMARTMONTOOLS is not set
# FREETZ_PACKAGE_SMSTOOLS3 is not set
# FREETZ_PACKAGE_SMUSBUTIL is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SPAWN_FCGI is not set
# FREETZ_PACKAGE_SQLITE is not set
# FREETZ_PACKAGE_SQUASHFS3 is not set
# FREETZ_PACKAGE_SQUASHFS4 is not set
# FREETZ_PACKAGE_SSHFS_FUSE is not set
# FREETZ_PACKAGE_SSLH is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_SUBVERSION is not set
# FREETZ_PACKAGE_SUDO is not set
# FREETZ_PACKAGE_SUNDTEK is not set
# FREETZ_PACKAGE_SYNCE_DCCM is not set
# FREETZ_PACKAGE_SYNCE_SERIAL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TCP_WRAPPERS is not set
#
# Tesseract OCR (not available, needs libstdc++ as Standard C++ Library)
#
# FREETZ_PACKAGE_TIFF is not set
# FREETZ_PACKAGE_TINC is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TMUX is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
# FREETZ_PACKAGE_TRANSMISSION_WITH_OPENSSL is not set
# FREETZ_PACKAGE_TRANSMISSION_WITH_POLARSSL is not set
# FREETZ_PACKAGE_TREE is not set
# FREETZ_PACKAGE_TRICKLE is not set
# FREETZ_PACKAGE_UDPXY is not set
# FREETZ_PACKAGE_UMURMUR is not set
# FREETZ_PACKAGE_UNFS3 is not set
# FREETZ_PACKAGE_UNRAR is not set
# FREETZ_PACKAGE_USBIDS is not set
# FREETZ_PACKAGE_UTIL_LINUX is not set
# FREETZ_PACKAGE_VIM is not set
# FREETZ_PACKAGE_VNSTAT is not set
# FREETZ_PACKAGE_VPNC is not set
# FREETZ_PACKAGE_VSFTPD is not set
# FREETZ_PACKAGE_VTUN is not set
FREETZ_WGET=y
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XMAIL is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
# FREETZ_PACKAGE_XSLTPROC is not set
# FREETZ_PACKAGE_XZ is not set
#
# Unstable
#
# FREETZ_PACKAGE_ASTERISK is not set
# FREETZ_PACKAGE_COLLECTD is not set
# FREETZ_PACKAGE_DTMFBOX is not set
# FREETZ_PACKAGE_HPLIP is not set
# FREETZ_PACKAGE_HP_UTILS is not set
# FREETZ_PACKAGE_MINI_FO is not set
#
# SANE
#
# FREETZ_PACKAGE_SANE_BACKENDS is not set
#
# SCANBUTTOND
#
# FREETZ_PACKAGE_SCANBUTTOND is not set
# FREETZ_PACKAGE_SQUID is not set
#
# truecrypt (not available, needs libstdc++ as the Standard C++ Library)
#
# FREETZ_PACKAGE_USBIP is not set
# FREETZ_PACKAGE_USBROOT is not set
# FREETZ_PACKAGE_VIRTUALIP_CGI is not set
# FREETZ_PACKAGE_ZABBIX is not set
#
# Web interfaces
#
# FREETZ_PACKAGE_AUTHORIZED_KEYS is not set
# FREETZ_PACKAGE_AVM_FORWARDING is not set
# FREETZ_PACKAGE_DNSD_CGI is not set
# FREETZ_PACKAGE_DOWNLOADER is not set
# FREETZ_PACKAGE_NFSD_CGI is not set
# FREETZ_PACKAGE_ONLINECHANGED_CGI is not set
# FREETZ_PACKAGE_PHPXMAIL is not set
# FREETZ_PACKAGE_RRDSTATS is not set
# FREETZ_PACKAGE_SPINDOWN_CGI is not set
FREETZ_PACKAGE_SYSLOGD_CGI=y
# FREETZ_PACKAGE_TRANSMISSION_CGI is not set
# FREETZ_PACKAGE_VNSTAT_CGI is not set
# FREETZ_PACKAGE_WOL_CGI is not set
#
# Shared libraries
#
#
# Apache Portable Runtime libs
#
# FREETZ_LIB_libapr is not set
# FREETZ_LIB_libapr_WITH_DSO is not set
# FREETZ_LIB_libaprutil is not set
# FREETZ_LIB_libaprutil_WITH_LIBDB is not set
#
# Avahi libraries
#
# FREETZ_LIB_libavahi_common is not set
# FREETZ_LIB_libavahi_core is not set
# FREETZ_LIB_libavahi_client is not set
#
# C++
#
# FREETZ_LIB_STDCXXLIB is not set
# FREETZ_LIB_STDCXXLIB_WITH_WCHAR is not set
# FREETZ_LIB_libstdc__ is not set
# FREETZ_LIB_libuClibc__ is not set
# FREETZ_LIB_libuClibc__WITH_WCHAR is not set
#
# Charsets & Internationalization
#
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libintl is not set
#
# Crypto & SSL
#
#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set
#
# Digests ---
#
# FREETZ_LIB_libgcrypt_WITH_DIGEST_crc is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_gostr3411_94 is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_md4 is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_md5 is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_rmd160 is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_sha1 is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_sha256 is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_sha512 is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_stribog is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_tiger is not set
# FREETZ_LIB_libgcrypt_WITH_DIGEST_whirlpool is not set
#
# Symmetric ciphers ---
#
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_aes is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_arcfour is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_blowfish is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_camellia is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_cast5 is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_des is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_gost28147 is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_idea is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_rfc2268 is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_salsa20 is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_seed is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_serpent is not set
# FREETZ_LIB_libgcrypt_WITH_SYMMETRIC_CIPHER_twofish is not set
#
# Asymmetric ciphers ---
#
# FREETZ_LIB_libgcrypt_WITH_ASYMMETRIC_CIPHER_dsa is not set
# FREETZ_LIB_libgcrypt_WITH_ASYMMETRIC_CIPHER_ecc is not set
# FREETZ_LIB_libgcrypt_WITH_ASYMMETRIC_CIPHER_elgamal is not set
# FREETZ_LIB_libgcrypt_WITH_ASYMMETRIC_CIPHER_rsa is not set
#
# GnuTLS ---------------------------------
#
# FREETZ_LIB_libgnutls is not set
# FREETZ_LIB_libtasn1 is not set
#
# Nettle ---------------------------------
#
# FREETZ_LIB_libnettle is not set
# FREETZ_LIB_libhogweed is not set
#
# SSL ------------------------------------
#
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libpolarssl12 is not set
# FREETZ_LIB_libpolarssl12_WITH_BLOWFISH is not set
# FREETZ_LIB_libpolarssl12_WITH_GENRSA is not set
# FREETZ_LIB_libpolarssl13 is not set
# FREETZ_LIB_libpolarssl13_WITH_BLOWFISH is not set
# FREETZ_LIB_libpolarssl13_WITH_GENRSA is not set
# FREETZ_LIB_libcrypto is not set
# FREETZ_LIB_libcrypto_WITH_EC is not set
# FREETZ_OPENSSL_VERSION_PROMPT is not set
# FREETZ_OPENSSL_VERSION_1_REQUIRED is not set
#
# Data compression
#
# FREETZ_LIB_liblzma is not set
# FREETZ_LIB_liblzo2 is not set
# FREETZ_LIB_libz is not set
#
# Database
#
# FREETZ_LIB_libdb is not set
# FREETZ_LIB_libsqlite3 is not set
#
# File systems
#
#
# e2fsprogs libraries
#
# FREETZ_LIB_libblkid is not set
# FREETZ_LIB_libcom_err is not set
# FREETZ_LIB_libe2p is not set
# FREETZ_LIB_libext2fs is not set
# FREETZ_LIB_libss is not set
# FREETZ_LIB_libuuid is not set
# FREETZ_LIB_libfuse is not set
# FREETZ_LIB_libntfs is not set
#
# GLib
#
# FREETZ_LIB_libglib_2 is not set
# FREETZ_LIB_libgio_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set
#
# Graphics & fonts
#
# FREETZ_LIB_libfreetype is not set
# FREETZ_LIB_libart_lgpl_2 is not set
# FREETZ_LIB_libexif is not set
# FREETZ_LIB_libjpeg is not set
# FREETZ_LIB_liblept is not set
# FREETZ_LIB_libpng12 is not set
# FREETZ_LIB_libgd is not set
# FREETZ_LIB_libopenjpeg is not set
# FREETZ_LIB_libtiff is not set
# FREETZ_LIB_libtiffxx is not set
# FREETZ_LIB_libnetpbm is not set
#
# Multi precision arithmetic libs
#
# FREETZ_LIB_libgmp is not set
# FREETZ_LIB_libmpfr is not set
# FREETZ_LIB_libmpc is not set
#
# Multimedia
#
#
# Audio and video codecs
#
#
# Audio codecs
#
# FREETZ_LIB_libFLAC is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libogg is not set
# FREETZ_LIB_libopus is not set
# FREETZ_LIB_libspeex is not set
# FREETZ_LIB_libspeexdsp is not set
#
# FFmpeg libraries
#
# FREETZ_LIB_libavcodec is not set
# FREETZ_LIB_libavdevice is not set
# FREETZ_LIB_libavfilter is not set
# FREETZ_LIB_libavformat is not set
# FREETZ_LIB_libavutil is not set
# FREETZ_LIB_libpostproc is not set
# FREETZ_LIB_libswresample is not set
# FREETZ_LIB_libswscale is not set
#
# Video codecs
#
#
# Vorbis video codec ---------------------
#
# FREETZ_LIB_libvorbis is not set
# FREETZ_LIB_libvorbisenc is not set
# FREETZ_LIB_libvorbisfile is not set
#
# ID3 tag reading libs
#
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libtag is not set
#
# ncurses
#
# FREETZ_LIB_libncurses is not set
#
# terminfo database
#
#
# Select terminfo database entries to install (see help of 'Show all items')
#
# FREETZ_SHARE_terminfo is not set
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set
#
# Networking
#
#
# ATM ------------------------------------
#
# FREETZ_LIB_libatm is not set
#
# Bluetooth ------------------------------
#
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libopenobex is not set
#
# ISDN & CAPI ----------------------------
#
# FREETZ_LIB_libcapi20 is not set
#
# Misc networking ------------------------
#
# FREETZ_LIB_libdnet is not set
# FREETZ_LIB_libgsm is not set
# FREETZ_LIB_libiksemel is not set
# FREETZ_LIB_libpcap is not set
# FREETZ_LIB_libnet is not set
# FREETZ_LIB_liboping is not set
# FREETZ_LIB_libosip2 is not set
# FREETZ_LIB_libosipparser2 is not set
# FREETZ_LIB_libspandsp is not set
# FREETZ_LIB_libsrtp is not set
#
# PJ Project
#
# FREETZ_LIB_libpj is not set
# FREETZ_LIB_libpjlib_util is not set
# FREETZ_LIB_libpjmedia is not set
# FREETZ_LIB_libpjmedia_audiodev is not set
# FREETZ_LIB_libpjmedia_codec is not set
# FREETZ_LIB_libpjmedia_videodev is not set
# FREETZ_LIB_libpjnath is not set
# FREETZ_LIB_libpjsip is not set
# FREETZ_LIB_libpjsip_simple is not set
# FREETZ_LIB_libpjsip_ua is not set
# FREETZ_LIB_libpjsua is not set
#
# 3rdparty libraries
#
# FREETZ_LIB_libg7221codec is not set
# FREETZ_LIB_libilbccodec is not set
# FREETZ_LIB_libmilenage is not set
#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set
#
# Regular expressions
#
# FREETZ_LIB_libpcre is not set
# FREETZ_LIB_libpcreposix is not set
#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libpthread=y
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libubacktrace=y
FREETZ_LIB_libuClibc=y
# FREETZ_LIB_libutil is not set
#
# USB & FTDI
#
# FREETZ_LIB_libusb_0 is not set
# FREETZ_LIB_libusb_1 is not set
# FREETZ_LIB_libftdi is not set
#
# Web and WebDAV
#
# FREETZ_LIB_libcurl is not set
# FREETZ_LIB_libcurl_WITH_ZLIB is not set
# FREETZ_LIB_libjansson is not set
# FREETZ_LIB_libjs is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libneon_WITH_SSL is not set
# FREETZ_LIB_libneon_WITH_ZLIB is not set
# FREETZ_LIB_libserf is not set
#
# XML & XSLT
#
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libxml2 is not set
# FREETZ_LIB_libxml2_WITH_HTML is not set
# FREETZ_LIB_libxslt is not set
# FREETZ_LIB_libexslt is not set
# FREETZ_LIB_libattr is not set
# FREETZ_LIB_libcap is not set
# FREETZ_LIB_libdbus is not set
FREETZ_LIB_libgcc_s=y
# FREETZ_LIB_libconfig is not set
# FREETZ_LIB_libdaemon is not set
# FREETZ_LIB_libdevmapper is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libev is not set
# FREETZ_LIB_libevent is not set
# FREETZ_LIB_libffi is not set
# FREETZ_LIB_libfakefile is not set
FREETZ_LIB_libctlmgr=y
# FREETZ_LIB_libmultid is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_liblua is not set
# FREETZ_LIB_libpcsclite is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_libprivatekeypassword is not set
# FREETZ_LIB_libprotobuf_c is not set
# FREETZ_LIB_librrd is not set
# FREETZ_LIB_librrd_th is not set
# FREETZ_LIB_libslang is not set
# FREETZ_LIB_libsynce is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libwx_baseu is not set
# FREETZ_LIB_libyaml is not set
#
# Kernel modules
#
# FREETZ_MODULES_ALL is not set
#
# block
#
#
# crypto
#
# FREETZ_MODULE_aes_generic is not set
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_crypto_algapi is not set
# FREETZ_MODULE_aead is not set
# FREETZ_MODULE_cbc is not set
# FREETZ_MODULE_crypto_blkcipher is not set
# FREETZ_MODULE_crypto_hash is not set
# FREETZ_MODULE_crypto_wq is not set
# FREETZ_MODULE_cryptomgr is not set
# FREETZ_MODULE_pcompress is not set
# FREETZ_MODULE_rng is not set
# FREETZ_MODULE_sha1_generic is not set
# FREETZ_MODULE_sha256_generic is not set
#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbcore is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_ipaq is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_btusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set
# FREETZ_MODULE_option is not set
#
# fs
#
# FREETZ_MODULE_autofs4 is not set
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_hfs is not set
# FREETZ_MODULE_hfsplus is not set
# FREETZ_MODULE_fuse is not set
# FREETZ_MODULE_iso9660 is not set
# FREETZ_MODULE_jbd2 is not set
# FREETZ_MODULE_lockd is not set
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set
# FREETZ_MODULE_nfsd is not set
# FREETZ_MODULE_exportfs is not set
# FREETZ_MODULE_nfs is not set
# FREETZ_MODULE_nls_cp437 is not set
# FREETZ_MODULE_nls_iso8859_1 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
# FREETZ_MODULE_reiserfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdos is not set
# FREETZ_MODULE_jffs2 is not set
# FREETZ_MODULE_mbcache is not set
#
# lib
#
# FREETZ_MODULE_crc16 is not set
# FREETZ_MODULE_crc_ccitt is not set
# FREETZ_MODULE_lzo_compress is not set
# FREETZ_MODULE_lzo_decompress is not set
#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
# FREETZ_MODULE_cls_u32 is not set
# FREETZ_MODULE_l2cap is not set
#
# network scheduler
#
# FREETZ_MODULE_sch_cbq is not set
# FREETZ_MODULE_sch_htb is not set
# FREETZ_MODULE_sch_llq is not set
# FREETZ_MODULE_sch_sfq is not set
# FREETZ_MODULE_sch_tbf is not set
# FREETZ_MODULE_rfcomm is not set
# FREETZ_MODULE_sunrpc is not set
#
# Busybox applets
#
FREETZ_BUSYBOX__MANDATORY=y
FREETZ_BUSYBOX__MANDATORY_05_XX=y
FREETZ_BUSYBOX__IPV6_UTILS=y
# FREETZ_BUSYBOX__PACKER is not set
# FREETZ_BUSYBOX__NETWORK is not set
# FREETZ_BUSYBOX__TERMINAL is not set
# FREETZ_BUSYBOX__DEVELOPER is not set
#
#
#
FREETZ_BUSYBOX_HAVE_DOT_CONFIG=y
#
# Busybox Settings
#
#
# General Configuration
#
# FREETZ_BUSYBOX_EXTRA_COMPAT is not set
# FREETZ_BUSYBOX_INCLUDE_SUSv2 is not set
# FREETZ_BUSYBOX_USE_PORTABLE_CODE is not set
FREETZ_BUSYBOX_PLATFORM_LINUX=y
# FREETZ_BUSYBOX_FEATURE_BUFFERS_USE_MALLOC is not set
FREETZ_BUSYBOX_FEATURE_BUFFERS_GO_ON_STACK=y
# FREETZ_BUSYBOX_FEATURE_BUFFERS_GO_IN_BSS is not set
FREETZ_BUSYBOX_SHOW_USAGE=y
FREETZ_BUSYBOX_FEATURE_VERBOSE_USAGE=y
# FREETZ_BUSYBOX_FEATURE_COMPRESS_USAGE is not set
# FREETZ_BUSYBOX_FEATURE_INSTALLER is not set
# FREETZ_BUSYBOX_INSTALL_NO_USR is not set
# FREETZ_BUSYBOX_LOCALE_SUPPORT is not set
# FREETZ_BUSYBOX_UNICODE_SUPPORT is not set
# FREETZ_BUSYBOX_PAM is not set
# FREETZ_BUSYBOX_LONG_OPTS is not set
FREETZ_BUSYBOX_FEATURE_DEVPTS=y
# FREETZ_BUSYBOX_FEATURE_CLEAN_UP is not set
# FREETZ_BUSYBOX_FEATURE_UTMP is not set
FREETZ_BUSYBOX_FEATURE_PIDFILE=y
FREETZ_BUSYBOX_PID_FILE_PATH="/var/run"
FREETZ_BUSYBOX_FEATURE_SUID=y
# FREETZ_BUSYBOX_FEATURE_SUID_CONFIG is not set
# FREETZ_BUSYBOX_SELINUX is not set
FREETZ_BUSYBOX_FEATURE_PREFER_APPLETS=y
FREETZ_BUSYBOX_BUSYBOX_EXEC_PATH="/bin/busybox"
FREETZ_BUSYBOX_FEATURE_SYSLOG=y
FREETZ_BUSYBOX_FEATURE_HAVE_RPC=y
#
# Build Options
#
# FREETZ_BUSYBOX_STATIC is not set
# FREETZ_BUSYBOX_PIE is not set
# FREETZ_BUSYBOX_NOMMU is not set
FREETZ_BUSYBOX_LFS=y
FREETZ_BUSYBOX_CROSS_COMPILER_PREFIX=""
FREETZ_BUSYBOX_SYSROOT=""
FREETZ_BUSYBOX_EXTRA_CFLAGS=""
FREETZ_BUSYBOX_EXTRA_LDFLAGS=""
FREETZ_BUSYBOX_EXTRA_LDLIBS=""
#
# Debugging Options
#
# FREETZ_BUSYBOX_DEBUG is not set
# FREETZ_BUSYBOX_UNIT_TEST is not set
# FREETZ_BUSYBOX_WERROR is not set
FREETZ_BUSYBOX_NO_DEBUG_LIB=y
# FREETZ_BUSYBOX_DMALLOC is not set
# FREETZ_BUSYBOX_EFENCE is not set
#
# Installation Options ("make install" behavior)
#
FREETZ_BUSYBOX_INSTALL_APPLET_SYMLINKS=y
# FREETZ_BUSYBOX_INSTALL_APPLET_HARDLINKS is not set
# FREETZ_BUSYBOX_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
# FREETZ_BUSYBOX_INSTALL_APPLET_DONT is not set
FREETZ_BUSYBOX_PREFIX="./_install"
#
# Busybox Library Tuning
#
# FREETZ_BUSYBOX_FEATURE_SYSTEMD is not set
# FREETZ_BUSYBOX_FEATURE_RTMINMAX is not set
FREETZ_BUSYBOX_PASSWORD_MINLEN=6
FREETZ_BUSYBOX_MD5_SMALL=1
FREETZ_BUSYBOX_SHA3_SMALL=1
# FREETZ_BUSYBOX_FEATURE_FAST_TOP is not set
# FREETZ_BUSYBOX_FEATURE_ETC_NETWORKS is not set
FREETZ_BUSYBOX_FEATURE_USE_TERMIOS=y
FREETZ_BUSYBOX_FEATURE_EDITING=y
FREETZ_BUSYBOX_FEATURE_EDITING_MAX_LEN=1024
# FREETZ_BUSYBOX_FEATURE_EDITING_VI is not set
FREETZ_BUSYBOX_FEATURE_EDITING_HISTORY=255
# FREETZ_BUSYBOX_FEATURE_EDITING_SAVEHISTORY is not set
FREETZ_BUSYBOX_FEATURE_TAB_COMPLETION=y
# FREETZ_BUSYBOX_FEATURE_USERNAME_COMPLETION is not set
FREETZ_BUSYBOX_FEATURE_EDITING_FANCY_PROMPT=y
# FREETZ_BUSYBOX_FEATURE_EDITING_ASK_TERMINAL is not set
FREETZ_BUSYBOX_FEATURE_NON_POSIX_CP=y
# FREETZ_BUSYBOX_FEATURE_VERBOSE_CP_MESSAGE is not set
FREETZ_BUSYBOX_FEATURE_COPYBUF_KB=64
FREETZ_BUSYBOX_FEATURE_SKIP_ROOTFS=y
FREETZ_BUSYBOX_MONOTONIC_SYSCALL=y
FREETZ_BUSYBOX_IOCTL_HEX2STR_ERROR=y
FREETZ_BUSYBOX_FEATURE_HWIB=y
#
# Applets
#
#
# Archival Utilities
#
# FREETZ_BUSYBOX_FEATURE_SEAMLESS_XZ is not set
# FREETZ_BUSYBOX_FEATURE_SEAMLESS_LZMA is not set
# FREETZ_BUSYBOX_FEATURE_SEAMLESS_BZ2 is not set
FREETZ_BUSYBOX_FEATURE_SEAMLESS_GZ=y
# FREETZ_BUSYBOX_FEATURE_SEAMLESS_Z is not set
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_UNCOMPRESS is not set
FREETZ_BUSYBOX_GUNZIP=y
FREETZ_BUSYBOX_BUNZIP2=y
# FREETZ_BUSYBOX_UNLZMA is not set
FREETZ_BUSYBOX_UNXZ=y
FREETZ_BUSYBOX_XZ=y
FREETZ_BUSYBOX_BZIP2=y
# FREETZ_BUSYBOX_CPIO is not set
# FREETZ_BUSYBOX_DPKG is not set
# FREETZ_BUSYBOX_DPKG_DEB is not set
FREETZ_BUSYBOX_GZIP=y
FREETZ_BUSYBOX_GZIP_FAST=0
# FREETZ_BUSYBOX_FEATURE_GZIP_LEVELS is not set
# FREETZ_BUSYBOX_LZOP is not set
# FREETZ_BUSYBOX_RPM2CPIO is not set
# FREETZ_BUSYBOX_RPM is not set
FREETZ_BUSYBOX_TAR=y
FREETZ_BUSYBOX_FEATURE_TAR_CREATE=y
# FREETZ_BUSYBOX_FEATURE_TAR_AUTODETECT is not set
FREETZ_BUSYBOX_FEATURE_TAR_FROM=y
FREETZ_BUSYBOX_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
# FREETZ_BUSYBOX_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
FREETZ_BUSYBOX_FEATURE_TAR_GNU_EXTENSIONS=y
# FREETZ_BUSYBOX_FEATURE_TAR_UNAME_GNAME is not set
# FREETZ_BUSYBOX_FEATURE_TAR_NOPRESERVE_TIME is not set
FREETZ_BUSYBOX_UNZIP=y
#
# Coreutils
#
FREETZ_BUSYBOX_BASENAME=y
FREETZ_BUSYBOX_CAT=y
FREETZ_BUSYBOX_DATE=y
FREETZ_BUSYBOX_FEATURE_DATE_ISOFMT=y
# FREETZ_BUSYBOX_FEATURE_DATE_NANO is not set
FREETZ_BUSYBOX_FEATURE_DATE_COMPAT=y
FREETZ_BUSYBOX_DD=y
FREETZ_BUSYBOX_FEATURE_DD_SIGNAL_HANDLING=y
# FREETZ_BUSYBOX_FEATURE_DD_THIRD_STATUS_LINE is not set
FREETZ_BUSYBOX_FEATURE_DD_IBS_OBS=y
# FREETZ_BUSYBOX_FEATURE_DD_STATUS is not set
# FREETZ_BUSYBOX_HOSTID is not set
FREETZ_BUSYBOX_ID=y
FREETZ_BUSYBOX_GROUPS=y
# FREETZ_BUSYBOX_SHUF is not set
FREETZ_BUSYBOX_SYNC=y
# FREETZ_BUSYBOX_FEATURE_SYNC_FANCY is not set
FREETZ_BUSYBOX_TEST=y
# FREETZ_BUSYBOX_FEATURE_TEST_64 is not set
FREETZ_BUSYBOX_TOUCH=y
# FREETZ_BUSYBOX_FEATURE_TOUCH_NODEREF is not set
FREETZ_BUSYBOX_FEATURE_TOUCH_SUSV3=y
FREETZ_BUSYBOX_TR=y
FREETZ_BUSYBOX_FEATURE_TR_CLASSES=y
FREETZ_BUSYBOX_FEATURE_TR_EQUIV=y
# FREETZ_BUSYBOX_TRUNCATE is not set
# FREETZ_BUSYBOX_UNLINK is not set
# FREETZ_BUSYBOX_BASE64 is not set
# FREETZ_BUSYBOX_CAL is not set
# FREETZ_BUSYBOX_CATV is not set
FREETZ_BUSYBOX_CHGRP=y
FREETZ_BUSYBOX_CHMOD=y
FREETZ_BUSYBOX_CHOWN=y
FREETZ_BUSYBOX_CHROOT=y
# FREETZ_BUSYBOX_CKSUM is not set
# FREETZ_BUSYBOX_COMM is not set
FREETZ_BUSYBOX_CP=y
FREETZ_BUSYBOX_CUT=y
FREETZ_BUSYBOX_DF=y
# FREETZ_BUSYBOX_FEATURE_DF_FANCY is not set
FREETZ_BUSYBOX_DIRNAME=y
# FREETZ_BUSYBOX_DOS2UNIX is not set
FREETZ_BUSYBOX_DU=y
FREETZ_BUSYBOX_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
FREETZ_BUSYBOX_ECHO=y
FREETZ_BUSYBOX_FEATURE_FANCY_ECHO=y
FREETZ_BUSYBOX_ENV=y
# FREETZ_BUSYBOX_EXPAND is not set
FREETZ_BUSYBOX_EXPR=y
# FREETZ_BUSYBOX_EXPR_MATH_SUPPORT_64 is not set
FREETZ_BUSYBOX_FALSE=y
# FREETZ_BUSYBOX_FOLD is not set
# FREETZ_BUSYBOX_FSYNC is not set
FREETZ_BUSYBOX_HEAD=y
FREETZ_BUSYBOX_FEATURE_FANCY_HEAD=y
# FREETZ_BUSYBOX_INSTALL is not set
FREETZ_BUSYBOX_LN=y
FREETZ_BUSYBOX_LOGNAME=y
FREETZ_BUSYBOX_LS=y
FREETZ_BUSYBOX_FEATURE_LS_FILETYPES=y
FREETZ_BUSYBOX_FEATURE_LS_FOLLOWLINKS=y
FREETZ_BUSYBOX_FEATURE_LS_RECURSIVE=y
FREETZ_BUSYBOX_FEATURE_LS_SORTFILES=y
FREETZ_BUSYBOX_FEATURE_LS_TIMESTAMPS=y
FREETZ_BUSYBOX_FEATURE_LS_USERNAME=y
FREETZ_BUSYBOX_MD5SUM=y
FREETZ_BUSYBOX_MKDIR=y
FREETZ_BUSYBOX_MKFIFO=y
FREETZ_BUSYBOX_MKNOD=y
FREETZ_BUSYBOX_MV=y
FREETZ_BUSYBOX_NICE=y
FREETZ_BUSYBOX_NOHUP=y
# FREETZ_BUSYBOX_OD is not set
FREETZ_BUSYBOX_PRINTENV=y
FREETZ_BUSYBOX_PRINTF=y
FREETZ_BUSYBOX_PWD=y
FREETZ_BUSYBOX_READLINK=y
FREETZ_BUSYBOX_FEATURE_READLINK_FOLLOW=y
FREETZ_BUSYBOX_REALPATH=y
FREETZ_BUSYBOX_RM=y
FREETZ_BUSYBOX_RMDIR=y
FREETZ_BUSYBOX_SEQ=y
# FREETZ_BUSYBOX_SHA1SUM is not set
# FREETZ_BUSYBOX_SHA256SUM is not set
# FREETZ_BUSYBOX_SHA512SUM is not set
# FREETZ_BUSYBOX_SHA3SUM is not set
FREETZ_BUSYBOX_SLEEP=y
FREETZ_BUSYBOX_FEATURE_FANCY_SLEEP=y
# FREETZ_BUSYBOX_FEATURE_FLOAT_SLEEP is not set
FREETZ_BUSYBOX_SORT=y
# FREETZ_BUSYBOX_FEATURE_SORT_BIG is not set
# FREETZ_BUSYBOX_SPLIT is not set
FREETZ_BUSYBOX_STAT=y
FREETZ_BUSYBOX_FEATURE_STAT_FORMAT=y
FREETZ_BUSYBOX_STTY=y
# FREETZ_BUSYBOX_SUM is not set
# FREETZ_BUSYBOX_TAC is not set
FREETZ_BUSYBOX_TAIL=y
FREETZ_BUSYBOX_FEATURE_FANCY_TAIL=y
FREETZ_BUSYBOX_TEE=y
FREETZ_BUSYBOX_FEATURE_TEE_USE_BLOCK_IO=y
FREETZ_BUSYBOX_TRUE=y
FREETZ_BUSYBOX_TTY=y
FREETZ_BUSYBOX_UNAME=y
FREETZ_BUSYBOX_UNAME_OSNAME="GNU/Linux"
# FREETZ_BUSYBOX_UNEXPAND is not set
FREETZ_BUSYBOX_UNIQ=y
# FREETZ_BUSYBOX_USLEEP is not set
FREETZ_BUSYBOX_UUDECODE=y
# FREETZ_BUSYBOX_UUENCODE is not set
FREETZ_BUSYBOX_WC=y
# FREETZ_BUSYBOX_FEATURE_WC_LARGE is not set
# FREETZ_BUSYBOX_WHOAMI is not set
FREETZ_BUSYBOX_YES=y
#
# Common options
#
# FREETZ_BUSYBOX_FEATURE_VERBOSE is not set
#
# Common options for cp and mv
#
# FREETZ_BUSYBOX_FEATURE_PRESERVE_HARDLINKS is not set
#
# Common options for ls, more and telnet
#
FREETZ_BUSYBOX_FEATURE_AUTOWIDTH=y
#
# Common options for df, du, ls
#
FREETZ_BUSYBOX_FEATURE_HUMAN_READABLE=y
#
# Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum
#
FREETZ_BUSYBOX_FEATURE_MD5_SHA1_SUM_CHECK=y
#
# Console Utilities
#
# FREETZ_BUSYBOX_CHVT is not set
FREETZ_BUSYBOX_FGCONSOLE=y
# FREETZ_BUSYBOX_CLEAR is not set
# FREETZ_BUSYBOX_DEALLOCVT is not set
# FREETZ_BUSYBOX_DUMPKMAP is not set
# FREETZ_BUSYBOX_KBD_MODE is not set
# FREETZ_BUSYBOX_LOADFONT is not set
# FREETZ_BUSYBOX_LOADKMAP is not set
# FREETZ_BUSYBOX_OPENVT is not set
FREETZ_BUSYBOX_RESET=y
# FREETZ_BUSYBOX_RESIZE is not set
FREETZ_BUSYBOX_SETCONSOLE=y
# FREETZ_BUSYBOX_SETFONT is not set
# FREETZ_BUSYBOX_SETKEYCODES is not set
# FREETZ_BUSYBOX_SETLOGCONS is not set
# FREETZ_BUSYBOX_SHOWKEY is not set
#
# Debian Utilities
#
# FREETZ_BUSYBOX_MKTEMP is not set
# FREETZ_BUSYBOX_PIPE_PROGRESS is not set
# FREETZ_BUSYBOX_RUN_PARTS is not set
# FREETZ_BUSYBOX_START_STOP_DAEMON is not set
FREETZ_BUSYBOX_WHICH=y
#
# Editors
#
FREETZ_BUSYBOX_AWK=y
# FREETZ_BUSYBOX_FEATURE_AWK_LIBM is not set
# FREETZ_BUSYBOX_FEATURE_AWK_GNU_EXTENSIONS is not set
FREETZ_BUSYBOX_CMP=y
# FREETZ_BUSYBOX_DIFF is not set
# FREETZ_BUSYBOX_ED is not set
# FREETZ_BUSYBOX_PATCH is not set
FREETZ_BUSYBOX_SED=y
FREETZ_BUSYBOX_VI=y
FREETZ_BUSYBOX_FEATURE_VI_MAX_LEN=1024
FREETZ_BUSYBOX_FEATURE_VI_8BIT=y
FREETZ_BUSYBOX_FEATURE_VI_COLON=y
FREETZ_BUSYBOX_FEATURE_VI_YANKMARK=y
FREETZ_BUSYBOX_FEATURE_VI_SEARCH=y
# FREETZ_BUSYBOX_FEATURE_VI_REGEX_SEARCH is not set
FREETZ_BUSYBOX_FEATURE_VI_USE_SIGNALS=y
FREETZ_BUSYBOX_FEATURE_VI_DOT_CMD=y
FREETZ_BUSYBOX_FEATURE_VI_READONLY=y
FREETZ_BUSYBOX_FEATURE_VI_SETOPTS=y
FREETZ_BUSYBOX_FEATURE_VI_SET=y
FREETZ_BUSYBOX_FEATURE_VI_WIN_RESIZE=y
FREETZ_BUSYBOX_FEATURE_VI_ASK_TERMINAL=y
# FREETZ_BUSYBOX_FEATURE_VI_UNDO is not set
FREETZ_BUSYBOX_FEATURE_ALLOW_EXEC=y
#
# Finding Utilities
#
FREETZ_BUSYBOX_FIND=y
FREETZ_BUSYBOX_FEATURE_FIND_PRINT0=y
FREETZ_BUSYBOX_FEATURE_FIND_MTIME=y
FREETZ_BUSYBOX_FEATURE_FIND_MMIN=y
FREETZ_BUSYBOX_FEATURE_FIND_PERM=y
FREETZ_BUSYBOX_FEATURE_FIND_TYPE=y
FREETZ_BUSYBOX_FEATURE_FIND_XDEV=y
FREETZ_BUSYBOX_FEATURE_FIND_MAXDEPTH=y
FREETZ_BUSYBOX_FEATURE_FIND_NEWER=y
FREETZ_BUSYBOX_FEATURE_FIND_INUM=y
FREETZ_BUSYBOX_FEATURE_FIND_EXEC=y
# FREETZ_BUSYBOX_FEATURE_FIND_EXEC_PLUS is not set
FREETZ_BUSYBOX_FEATURE_FIND_USER=y
FREETZ_BUSYBOX_FEATURE_FIND_GROUP=y
FREETZ_BUSYBOX_FEATURE_FIND_NOT=y
FREETZ_BUSYBOX_FEATURE_FIND_DEPTH=y
FREETZ_BUSYBOX_FEATURE_FIND_PAREN=y
FREETZ_BUSYBOX_FEATURE_FIND_SIZE=y
FREETZ_BUSYBOX_FEATURE_FIND_PRUNE=y
# FREETZ_BUSYBOX_FEATURE_FIND_DELETE is not set
FREETZ_BUSYBOX_FEATURE_FIND_PATH=y
FREETZ_BUSYBOX_FEATURE_FIND_REGEX=y
# FREETZ_BUSYBOX_FEATURE_FIND_LINKS is not set
FREETZ_BUSYBOX_GREP=y
FREETZ_BUSYBOX_FEATURE_GREP_EGREP_ALIAS=y
FREETZ_BUSYBOX_FEATURE_GREP_FGREP_ALIAS=y
FREETZ_BUSYBOX_FEATURE_GREP_CONTEXT=y
FREETZ_BUSYBOX_XARGS=y
FREETZ_BUSYBOX_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
FREETZ_BUSYBOX_FEATURE_XARGS_SUPPORT_QUOTES=y
FREETZ_BUSYBOX_FEATURE_XARGS_SUPPORT_TERMOPT=y
FREETZ_BUSYBOX_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
# FREETZ_BUSYBOX_FEATURE_XARGS_SUPPORT_REPL_STR is not set
#
# Init Utilities
#
# FREETZ_BUSYBOX_BOOTCHARTD is not set
FREETZ_BUSYBOX_HALT=y
FREETZ_BUSYBOX_INIT=y
FREETZ_BUSYBOX_FEATURE_USE_INITTAB=y
FREETZ_BUSYBOX_FEATURE_KILL_REMOVED=y
FREETZ_BUSYBOX_FEATURE_KILL_DELAY=0
# FREETZ_BUSYBOX_FEATURE_INIT_SCTTY is not set
FREETZ_BUSYBOX_FEATURE_INIT_SYSLOG=y
# FREETZ_BUSYBOX_FEATURE_EXTRA_QUIET is not set
# FREETZ_BUSYBOX_FEATURE_INIT_COREDUMPS is not set
# FREETZ_BUSYBOX_FEATURE_INITRD is not set
FREETZ_BUSYBOX_INIT_TERMINAL_TYPE="linux"
# FREETZ_BUSYBOX_MESG is not set
#
# Login/Password Management Utilities
#
# FREETZ_BUSYBOX_ADD_SHELL is not set
# FREETZ_BUSYBOX_REMOVE_SHELL is not set
FREETZ_BUSYBOX_FEATURE_SHADOWPASSWDS=y
# FREETZ_BUSYBOX_USE_BB_PWD_GRP is not set
FREETZ_BUSYBOX_USE_BB_CRYPT=y
# FREETZ_BUSYBOX_USE_BB_CRYPT_SHA is not set
FREETZ_BUSYBOX_ADDUSER=y
# FREETZ_BUSYBOX_FEATURE_CHECK_NAMES is not set
FREETZ_BUSYBOX_LAST_ID=60000
FREETZ_BUSYBOX_FIRST_SYSTEM_ID=100
FREETZ_BUSYBOX_LAST_SYSTEM_ID=999
FREETZ_BUSYBOX_ADDGROUP=y
FREETZ_BUSYBOX_FEATURE_ADDUSER_TO_GROUP=y
FREETZ_BUSYBOX_DELUSER=y
FREETZ_BUSYBOX_DELGROUP=y
FREETZ_BUSYBOX_FEATURE_DEL_USER_FROM_GROUP=y
# FREETZ_BUSYBOX_GETTY is not set
FREETZ_BUSYBOX_LOGIN=y
# FREETZ_BUSYBOX_LOGIN_SESSION_AS_CHILD is not set
# FREETZ_BUSYBOX_LOGIN_SCRIPTS is not set
# FREETZ_BUSYBOX_FEATURE_NOLOGIN is not set
# FREETZ_BUSYBOX_FEATURE_SECURETTY is not set
FREETZ_BUSYBOX_PASSWD=y
FREETZ_BUSYBOX_FEATURE_PASSWD_WEAK_CHECK=y
FREETZ_BUSYBOX_CRYPTPW=y
# FREETZ_BUSYBOX_CHPASSWD is not set
FREETZ_BUSYBOX_FEATURE_DEFAULT_PASSWD_ALGO="des"
# FREETZ_BUSYBOX_SU is not set
# FREETZ_BUSYBOX_SULOGIN is not set
# FREETZ_BUSYBOX_VLOCK is not set
#
# Linux Ext2 FS Progs
#
# FREETZ_BUSYBOX_CHATTR is not set
# FREETZ_BUSYBOX_FSCK is not set
# FREETZ_BUSYBOX_LSATTR is not set
# FREETZ_BUSYBOX_TUNE2FS is not set
#
# Linux Module Utilities
#
# FREETZ_BUSYBOX_MODINFO is not set
# FREETZ_BUSYBOX_MODPROBE_SMALL is not set
FREETZ_BUSYBOX_INSMOD=y
FREETZ_BUSYBOX_RMMOD=y
FREETZ_BUSYBOX_LSMOD=y
FREETZ_BUSYBOX_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
FREETZ_BUSYBOX_MODPROBE=y
# FREETZ_BUSYBOX_FEATURE_MODPROBE_BLACKLIST is not set
# FREETZ_BUSYBOX_DEPMOD is not set
#
# Options common to multiple modutils
#
# FREETZ_BUSYBOX_FEATURE_2_4_MODULES is not set
# FREETZ_BUSYBOX_FEATURE_INSMOD_TRY_MMAP is not set
FREETZ_BUSYBOX_FEATURE_CHECK_TAINTED_MODULE=y
# FREETZ_BUSYBOX_FEATURE_MODUTILS_ALIAS is not set
# FREETZ_BUSYBOX_FEATURE_MODUTILS_SYMBOLS is not set
FREETZ_BUSYBOX_DEFAULT_MODULES_DIR="/lib/modules"
FREETZ_BUSYBOX_DEFAULT_DEPMOD_FILE="modules.dep"
#
# Linux System Utilities
#
# FREETZ_BUSYBOX_BLOCKDEV is not set
# FREETZ_BUSYBOX_FATATTR is not set
# FREETZ_BUSYBOX_FSTRIM is not set
# FREETZ_BUSYBOX_MDEV is not set
FREETZ_BUSYBOX_MOUNT=y
# FREETZ_BUSYBOX_FEATURE_MOUNT_FAKE is not set
FREETZ_BUSYBOX_FEATURE_MOUNT_VERBOSE=y
# FREETZ_BUSYBOX_FEATURE_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_FEATURE_MOUNT_LABEL is not set
FREETZ_BUSYBOX_FEATURE_MOUNT_NFS=y
FREETZ_BUSYBOX_FEATURE_MOUNT_CIFS=y
FREETZ_BUSYBOX_FEATURE_MOUNT_FLAGS=y
FREETZ_BUSYBOX_FEATURE_MOUNT_FSTAB=y
# FREETZ_BUSYBOX_FEATURE_MOUNT_OTHERTAB is not set
# FREETZ_BUSYBOX_REV is not set
# FREETZ_BUSYBOX_UEVENT is not set
# FREETZ_BUSYBOX_ACPID is not set
# FREETZ_BUSYBOX_BLKID is not set
FREETZ_BUSYBOX_DMESG=y
FREETZ_BUSYBOX_FEATURE_DMESG_PRETTY=y
# FREETZ_BUSYBOX_FBSET is not set
# FREETZ_BUSYBOX_FDFLUSH is not set
# FREETZ_BUSYBOX_FDFORMAT is not set
# FREETZ_BUSYBOX_FDISK is not set
# FREETZ_BUSYBOX_FINDFS is not set
FREETZ_BUSYBOX_FLOCK=y
# FREETZ_BUSYBOX_FREERAMDISK is not set
# FREETZ_BUSYBOX_FSCK_MINIX is not set
# FREETZ_BUSYBOX_MKFS_EXT2 is not set
# FREETZ_BUSYBOX_MKFS_MINIX is not set
# FREETZ_BUSYBOX_MKFS_REISER is not set
# FREETZ_BUSYBOX_MKFS_VFAT is not set
FREETZ_BUSYBOX_GETOPT=y
FREETZ_BUSYBOX_FEATURE_GETOPT_LONG=y
# FREETZ_BUSYBOX_HEXDUMP is not set
# FREETZ_BUSYBOX_HWCLOCK is not set
# FREETZ_BUSYBOX_IPCRM is not set
# FREETZ_BUSYBOX_IPCS is not set
# FREETZ_BUSYBOX_LOSETUP is not set
# FREETZ_BUSYBOX_LSPCI is not set
# FREETZ_BUSYBOX_LSUSB is not set
FREETZ_BUSYBOX_MKSWAP=y
# FREETZ_BUSYBOX_FEATURE_MKSWAP_UUID is not set
FREETZ_BUSYBOX_MORE=y
FREETZ_BUSYBOX_PIVOT_ROOT=y
# FREETZ_BUSYBOX_RDATE is not set
# FREETZ_BUSYBOX_RDEV is not set
# FREETZ_BUSYBOX_READPROFILE is not set
# FREETZ_BUSYBOX_RTCWAKE is not set
# FREETZ_BUSYBOX_SCRIPT is not set
# FREETZ_BUSYBOX_SCRIPTREPLAY is not set
# FREETZ_BUSYBOX_SETARCH is not set
FREETZ_BUSYBOX_SWAPONOFF=y
# FREETZ_BUSYBOX_FEATURE_SWAPON_DISCARD is not set
# FREETZ_BUSYBOX_FEATURE_SWAPON_PRI is not set
FREETZ_BUSYBOX_SWITCH_ROOT=y
FREETZ_BUSYBOX_UMOUNT=y
FREETZ_BUSYBOX_FEATURE_UMOUNT_ALL=y
#
# Common options for mount/umount
#
FREETZ_BUSYBOX_FEATURE_MOUNT_LOOP=y
FREETZ_BUSYBOX_FEATURE_MOUNT_LOOP_CREATE=y
# FREETZ_BUSYBOX_FEATURE_MTAB_SUPPORT is not set
# FREETZ_BUSYBOX_VOLUMEID is not set
#
# Miscellaneous Utilities
#
# FREETZ_BUSYBOX_CONSPY is not set
FREETZ_BUSYBOX_CROND=y
# FREETZ_BUSYBOX_FEATURE_CROND_D is not set
# FREETZ_BUSYBOX_FEATURE_CROND_CALL_SENDMAIL is not set
# FREETZ_BUSYBOX_FEATURE_CROND_ROOT_NOLOG is not set
FREETZ_BUSYBOX_FEATURE_CROND_DIR="/var/spool/cron"
# FREETZ_BUSYBOX_I2CGET is not set
# FREETZ_BUSYBOX_I2CSET is not set
# FREETZ_BUSYBOX_I2CDUMP is not set
# FREETZ_BUSYBOX_I2CDETECT is not set
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_NANDWRITE is not set
# FREETZ_BUSYBOX_NANDDUMP is not set
# FREETZ_BUSYBOX_RFKILL is not set
FREETZ_BUSYBOX_SETSERIAL=y
# FREETZ_BUSYBOX_TASKSET is not set
# FREETZ_BUSYBOX_UBIATTACH is not set
# FREETZ_BUSYBOX_UBIDETACH is not set
# FREETZ_BUSYBOX_UBIMKVOL is not set
# FREETZ_BUSYBOX_UBIRMVOL is not set
# FREETZ_BUSYBOX_UBIRSVOL is not set
# FREETZ_BUSYBOX_UBIUPDATEVOL is not set
# FREETZ_BUSYBOX_ADJTIMEX is not set
# FREETZ_BUSYBOX_BBCONFIG is not set
# FREETZ_BUSYBOX_BEEP is not set
# FREETZ_BUSYBOX_CHAT is not set
# FREETZ_BUSYBOX_CHRT is not set
FREETZ_BUSYBOX_CRONTAB=y
# FREETZ_BUSYBOX_DC is not set
# FREETZ_BUSYBOX_DEVFSD is not set
# FREETZ_BUSYBOX_FEATURE_DEVFS is not set
# FREETZ_BUSYBOX_DEVMEM is not set
# FREETZ_BUSYBOX_EJECT is not set
# FREETZ_BUSYBOX_FBSPLASH is not set
# FREETZ_BUSYBOX_FLASHCP is not set
# FREETZ_BUSYBOX_FLASH_LOCK is not set
# FREETZ_BUSYBOX_FLASH_UNLOCK is not set
# FREETZ_BUSYBOX_FLASH_ERASEALL is not set
# FREETZ_BUSYBOX_IONICE is not set
# FREETZ_BUSYBOX_INOTIFYD is not set
# FREETZ_BUSYBOX_HDPARM is not set
FREETZ_BUSYBOX_MAKEDEVS=y
# FREETZ_BUSYBOX_FEATURE_MAKEDEVS_LEAF is not set
FREETZ_BUSYBOX_FEATURE_MAKEDEVS_TABLE=y
# FREETZ_BUSYBOX_MAN is not set
# FREETZ_BUSYBOX_MICROCOM is not set
# FREETZ_BUSYBOX_MOUNTPOINT is not set
# FREETZ_BUSYBOX_MT is not set
# FREETZ_BUSYBOX_RAIDAUTORUN is not set
# FREETZ_BUSYBOX_READAHEAD is not set
# FREETZ_BUSYBOX_RX is not set
# FREETZ_BUSYBOX_SETSID is not set
# FREETZ_BUSYBOX_STRINGS is not set
FREETZ_BUSYBOX_TIME=y
# FREETZ_BUSYBOX_TIMEOUT is not set
# FREETZ_BUSYBOX_TTYSIZE is not set
# FREETZ_BUSYBOX_VOLNAME is not set
# FREETZ_BUSYBOX_WATCHDOG is not set
#
# Networking Utilities
#
# FREETZ_BUSYBOX_NAMEIF is not set
FREETZ_BUSYBOX_NBDCLIENT=y
FREETZ_BUSYBOX_NC=y
# FREETZ_BUSYBOX_NC_SERVER is not set
FREETZ_BUSYBOX_NC_EXTRA=y
# FREETZ_BUSYBOX_NC_110_COMPAT is not set
FREETZ_BUSYBOX_PING=y
FREETZ_BUSYBOX_PING6=y
FREETZ_BUSYBOX_FEATURE_FANCY_PING=y
FREETZ_BUSYBOX_STUN_IP=y
FREETZ_BUSYBOX_WGET=y
FREETZ_BUSYBOX_FEATURE_WGET_STATUSBAR=y
FREETZ_BUSYBOX_FEATURE_WGET_AUTHENTICATION=y
FREETZ_BUSYBOX_FEATURE_WGET_TIMEOUT=y
# FREETZ_BUSYBOX_FEATURE_WGET_OPENSSL is not set
FREETZ_BUSYBOX_WHOIS=y
FREETZ_BUSYBOX_FEATURE_IPV6=y
# FREETZ_BUSYBOX_FEATURE_UNIX_LOCAL is not set
FREETZ_BUSYBOX_FEATURE_PREFER_IPV4_ADDRESS=y
# FREETZ_BUSYBOX_VERBOSE_RESOLUTION_ERRORS is not set
FREETZ_BUSYBOX_ARP=y
FREETZ_BUSYBOX_ARPING=y
FREETZ_BUSYBOX_BRCTL=y
FREETZ_BUSYBOX_FEATURE_BRCTL_FANCY=y
FREETZ_BUSYBOX_FEATURE_BRCTL_SHOW=y
# FREETZ_BUSYBOX_DNSD is not set
FREETZ_BUSYBOX_ETHER_WAKE=y
# FREETZ_BUSYBOX_FAKEIDENTD is not set
# FREETZ_BUSYBOX_FTPD is not set
FREETZ_BUSYBOX_FTPGET=y
FREETZ_BUSYBOX_FTPPUT=y
FREETZ_BUSYBOX_HOSTNAME=y
FREETZ_BUSYBOX_HTTPD=y
# FREETZ_BUSYBOX_FEATURE_HTTPD_RANGES is not set
# FREETZ_BUSYBOX_FEATURE_HTTPD_SETUID is not set
FREETZ_BUSYBOX_FEATURE_HTTPD_BASIC_AUTH=y
FREETZ_BUSYBOX_FEATURE_HTTPD_AUTH_MD5=y
FREETZ_BUSYBOX_FEATURE_HTTPD_CGI=y
FREETZ_BUSYBOX_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
# FREETZ_BUSYBOX_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
FREETZ_BUSYBOX_FEATURE_HTTPD_ENCODE_URL_STR=y
# FREETZ_BUSYBOX_FEATURE_HTTPD_ERROR_PAGES is not set
# FREETZ_BUSYBOX_FEATURE_HTTPD_PROXY is not set
# FREETZ_BUSYBOX_FEATURE_HTTPD_GZIP is not set
FREETZ_BUSYBOX_IFCONFIG=y
FREETZ_BUSYBOX_FEATURE_IFCONFIG_STATUS=y
# FREETZ_BUSYBOX_FEATURE_IFCONFIG_SLIP is not set
# FREETZ_BUSYBOX_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
FREETZ_BUSYBOX_FEATURE_IFCONFIG_HW=y
FREETZ_BUSYBOX_FEATURE_IFCONFIG_BROADCAST_PLUS=y
# FREETZ_BUSYBOX_IFENSLAVE is not set
# FREETZ_BUSYBOX_IFPLUGD is not set
FREETZ_BUSYBOX_IFUPDOWN=y
FREETZ_BUSYBOX_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
# FREETZ_BUSYBOX_FEATURE_IFUPDOWN_IP is not set
FREETZ_BUSYBOX_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
FREETZ_BUSYBOX_FEATURE_IFUPDOWN_IPV4=y
FREETZ_BUSYBOX_FEATURE_IFUPDOWN_IPV6=y
FREETZ_BUSYBOX_FEATURE_IFUPDOWN_MAPPING=y
# FREETZ_BUSYBOX_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set
FREETZ_BUSYBOX_INETD=y
# FREETZ_BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
# FREETZ_BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
# FREETZ_BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
# FREETZ_BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
# FREETZ_BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
# FREETZ_BUSYBOX_FEATURE_INETD_RPC is not set
FREETZ_BUSYBOX_IP=y
FREETZ_BUSYBOX_FEATURE_IP_ADDRESS=y
FREETZ_BUSYBOX_FEATURE_IP_LINK=y
FREETZ_BUSYBOX_FEATURE_IP_ROUTE=y
FREETZ_BUSYBOX_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
FREETZ_BUSYBOX_FEATURE_IP_TUNNEL=y
FREETZ_BUSYBOX_FEATURE_IP_RULE=y
FREETZ_BUSYBOX_FEATURE_IP_SHORT_FORMS=y
# FREETZ_BUSYBOX_FEATURE_IP_RARE_PROTOCOLS is not set
# FREETZ_BUSYBOX_IPADDR is not set
# FREETZ_BUSYBOX_IPLINK is not set
# FREETZ_BUSYBOX_IPROUTE is not set
# FREETZ_BUSYBOX_IPTUNNEL is not set
# FREETZ_BUSYBOX_IPRULE is not set
# FREETZ_BUSYBOX_IPCALC is not set
FREETZ_BUSYBOX_NETSTAT=y
# FREETZ_BUSYBOX_FEATURE_NETSTAT_WIDE is not set
FREETZ_BUSYBOX_FEATURE_NETSTAT_PRG=y
FREETZ_BUSYBOX_NSLOOKUP=y
# FREETZ_BUSYBOX_NTPD is not set
# FREETZ_BUSYBOX_PSCAN is not set
FREETZ_BUSYBOX_ROUTE=y
# FREETZ_BUSYBOX_SLATTACH is not set
# FREETZ_BUSYBOX_TCPSVD is not set
# FREETZ_BUSYBOX_TELNET is not set
FREETZ_BUSYBOX_TELNETD=y
FREETZ_BUSYBOX_FEATURE_TELNETD_STANDALONE=y
# FREETZ_BUSYBOX_FEATURE_TELNETD_INETD_WAIT is not set
FREETZ_BUSYBOX_TFTP=y
# FREETZ_BUSYBOX_TFTPD is not set
#
# Common options for tftp/tftpd
#
FREETZ_BUSYBOX_FEATURE_TFTP_GET=y
FREETZ_BUSYBOX_FEATURE_TFTP_PUT=y
# FREETZ_BUSYBOX_FEATURE_TFTP_BLOCKSIZE is not set
# FREETZ_BUSYBOX_TFTP_DEBUG is not set
FREETZ_BUSYBOX_TRACEROUTE=y
# FREETZ_BUSYBOX_TRACEROUTE6 is not set
# FREETZ_BUSYBOX_FEATURE_TRACEROUTE_VERBOSE is not set
# FREETZ_BUSYBOX_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
# FREETZ_BUSYBOX_FEATURE_TRACEROUTE_USE_ICMP is not set
# FREETZ_BUSYBOX_TUNCTL is not set
# FREETZ_BUSYBOX_UDHCPC6 is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_UDHCPC is not set
# FREETZ_BUSYBOX_UDPSVD is not set
FREETZ_BUSYBOX_VCONFIG=y
# FREETZ_BUSYBOX_ZCIP is not set
#
# Print Utilities
#
# FREETZ_BUSYBOX_LPD is not set
# FREETZ_BUSYBOX_LPR is not set
# FREETZ_BUSYBOX_LPQ is not set
#
# Mail Utilities
#
# FREETZ_BUSYBOX_MAKEMIME is not set
# FREETZ_BUSYBOX_POPMAILDIR is not set
# FREETZ_BUSYBOX_REFORMIME is not set
# FREETZ_BUSYBOX_SENDMAIL is not set
#
# Process Utilities
#
FREETZ_BUSYBOX_IOSTAT=y
# FREETZ_BUSYBOX_LSOF is not set
FREETZ_BUSYBOX_MPSTAT=y
# FREETZ_BUSYBOX_NMETER is not set
FREETZ_BUSYBOX_PMAP=y
# FREETZ_BUSYBOX_POWERTOP is not set
FREETZ_BUSYBOX_PSTREE=y
FREETZ_BUSYBOX_PWDX=y
FREETZ_BUSYBOX_SMEMCAP=y
FREETZ_BUSYBOX_TOP=y
FREETZ_BUSYBOX_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
FREETZ_BUSYBOX_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
# FREETZ_BUSYBOX_FEATURE_TOP_SMP_CPU is not set
# FREETZ_BUSYBOX_FEATURE_TOP_DECIMALS is not set
# FREETZ_BUSYBOX_FEATURE_TOP_SMP_PROCESS is not set
# FREETZ_BUSYBOX_FEATURE_TOPMEM is not set
FREETZ_BUSYBOX_UPTIME=y
FREETZ_BUSYBOX_FREE=y
# FREETZ_BUSYBOX_FUSER is not set
FREETZ_BUSYBOX_KILL=y
FREETZ_BUSYBOX_KILLALL=y
FREETZ_BUSYBOX_KILLALL5=y
# FREETZ_BUSYBOX_PGREP is not set
FREETZ_BUSYBOX_PIDOF=y
FREETZ_BUSYBOX_FEATURE_PIDOF_SINGLE=y
FREETZ_BUSYBOX_FEATURE_PIDOF_OMIT=y
# FREETZ_BUSYBOX_PKILL is not set
FREETZ_BUSYBOX_PS=y
FREETZ_BUSYBOX_FEATURE_PS_WIDE=y
FREETZ_BUSYBOX_FEATURE_PS_LONG=y
FREETZ_BUSYBOX_RENICE=y
FREETZ_BUSYBOX_BB_SYSCTL=y
FREETZ_BUSYBOX_FEATURE_SHOW_THREADS=y
# FREETZ_BUSYBOX_WATCH is not set
#
# Runit Utilities
#
# FREETZ_BUSYBOX_RUNSV is not set
# FREETZ_BUSYBOX_RUNSVDIR is not set
# FREETZ_BUSYBOX_SV is not set
# FREETZ_BUSYBOX_SVLOGD is not set
# FREETZ_BUSYBOX_CHPST is not set
# FREETZ_BUSYBOX_SETUIDGID is not set
# FREETZ_BUSYBOX_ENVUIDGID is not set
# FREETZ_BUSYBOX_ENVDIR is not set
# FREETZ_BUSYBOX_SOFTLIMIT is not set
#
# Shells
#
FREETZ_BUSYBOX_ASH=y
FREETZ_BUSYBOX_ASH_BASH_COMPAT=y
# FREETZ_BUSYBOX_ASH_IDLE_TIMEOUT is not set
FREETZ_BUSYBOX_ASH_JOB_CONTROL=y
FREETZ_BUSYBOX_ASH_ALIAS=y
FREETZ_BUSYBOX_ASH_GETOPTS=y
FREETZ_BUSYBOX_ASH_BUILTIN_ECHO=y
FREETZ_BUSYBOX_ASH_BUILTIN_PRINTF=y
FREETZ_BUSYBOX_ASH_BUILTIN_TEST=y
# FREETZ_BUSYBOX_ASH_HELP is not set
FREETZ_BUSYBOX_ASH_CMDCMD=y
# FREETZ_BUSYBOX_ASH_MAIL is not set
FREETZ_BUSYBOX_ASH_OPTIMIZE_FOR_SIZE=y
# FREETZ_BUSYBOX_ASH_RANDOM_SUPPORT is not set
FREETZ_BUSYBOX_ASH_EXPAND_PRMT=y
# FREETZ_BUSYBOX_CTTYHACK is not set
# FREETZ_BUSYBOX_HUSH is not set
# FREETZ_BUSYBOX_MSH is not set
FREETZ_BUSYBOX_FEATURE_SH_IS_ASH=y
# FREETZ_BUSYBOX_FEATURE_SH_IS_NONE is not set
# FREETZ_BUSYBOX_FEATURE_BASH_IS_ASH is not set
FREETZ_BUSYBOX_FEATURE_BASH_IS_NONE=y
FREETZ_BUSYBOX_SH_MATH_SUPPORT=y
# FREETZ_BUSYBOX_SH_MATH_SUPPORT_64 is not set
# FREETZ_BUSYBOX_FEATURE_SH_EXTRA_QUIET is not set
FREETZ_BUSYBOX_FEATURE_SH_STANDALONE=y
FREETZ_BUSYBOX_FEATURE_SH_NOFORK=y
# FREETZ_BUSYBOX_FEATURE_SH_HISTFILESIZE is not set
#
# System Logging Utilities
#
FREETZ_BUSYBOX_SYSLOGD=y
FREETZ_BUSYBOX_FEATURE_ROTATE_LOGFILE=y
FREETZ_BUSYBOX_FEATURE_REMOTE_LOG=y
FREETZ_BUSYBOX_FEATURE_SYSLOGD_DUP=y
# FREETZ_BUSYBOX_FEATURE_SYSLOGD_CFG is not set
FREETZ_BUSYBOX_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256
FREETZ_BUSYBOX_FEATURE_IPC_SYSLOG=y
FREETZ_BUSYBOX_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
FREETZ_BUSYBOX_LOGREAD=y
FREETZ_BUSYBOX_FEATURE_LOGREAD_REDUCED_LOCKING=y
# FREETZ_BUSYBOX_FEATURE_KMSG_SYSLOG is not set
FREETZ_BUSYBOX_KLOGD=y
FREETZ_BUSYBOX_FEATURE_KLOGD_KLOGCTL=y
FREETZ_BUSYBOX_LOGGER=y
#
# External processing
#
# EXTERNAL_ENABLED is not set
#
# Mod customizations ---------------------
#
#
# Web Interface
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"
FREETZ_SECURITY_LEVEL=1
FREETZ_STYLE_COLORED=y
# FREETZ_STYLE_GREY is not set
FREETZ_STYLE="colored"
#
# Freetz skins
#
FREETZ_SKIN_legacy=y
# FREETZ_SKIN_newfreetz is not set
# FREETZ_SKIN_phoenix is not set
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_ATOMPHIL is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_HANSOLO is not set
FREETZ_FAVICON_STRING="none"
FREETZ_TAGGING_NONE=y
# FREETZ_TAGGING_CUMA is not set
FREETZ_TAGGING_STRING="none"
#
# Additional image/box information
#
# FREETZ_REMOVE_BOX_INFO is not set
# FREETZ_REMOVE_FREETZ_INFO is not set
# FREETZ_MODIFY_AVM_VERSION is not set
FREETZ_USER_DEFINED_COMMENT=""
# FREETZ_CUSTOM_IMAGE_NAME is not set
FREETZ_CREATE_SEPARATE_OPTIONS_CFG=y
# FREETZ_REMOVE_DOT_CONFIG is not set
#
# Build system ---------------------------
#
#
# Toolchain options
#
# FREETZ_DOWNLOAD_TOOLCHAIN is not set
FREETZ_BUILD_TOOLCHAIN=y
#
# Kernel toolchain options ----------------------------------
#
FREETZ_KERNEL_BINUTILS_2_24=y
FREETZ_KERNEL_GCC_4_8=y
FREETZ_KERNEL_BINUTILS_VERSION="2.24"
FREETZ_KERNEL_GCC_VERSION="4.8.5"
#
# Target toolchain options ----------------------------------
#
# FREETZ_TARGET_UCLIBC_0_9_32 is not set
FREETZ_TARGET_UCLIBC_0_9_33=y
FREETZ_TARGET_UCLIBC_SUPPORTS_libubacktrace=y
FREETZ_TARGET_UCLIBC_REQUIRES_libubacktrace=y
FREETZ_TARGET_BINUTILS_2_24=y
FREETZ_TARGET_GCC_4_8=y
# FREETZ_TARGET_GCC_4_9 is not set
FREETZ_TARGET_GCC_DEFAULT_AS_NEEDED=y
FREETZ_STDCXXLIB_USE_UCLIBCXX=y
# FREETZ_STDCXXLIB_USE_GNULIBSTDCXX is not set
FREETZ_TARGET_UCLIBC_VERSION="0.9.33.2"
FREETZ_TARGET_BINUTILS_VERSION="2.24"
FREETZ_TARGET_GCC_MAJOR_VERSION="4.8"
FREETZ_TARGET_GCC_MINOR_VERSION="5"
FREETZ_TARGET_GCC_VERSION="${FREETZ_TARGET_GCC_MAJOR_VERSION}.${FREETZ_TARGET_GCC_MINOR_VERSION}"
FREETZ_GNULIBSTDCXX_VERSION="6.0.19"
FREETZ_STDCXXLIB="uclibcxx"
FREETZ_TARGET_CFLAGS="-Os -pipe -Wa,--trap"
FREETZ_RPATH="/usr/lib/freetz"
# FREETZ_TARGET_UCLIBC_DODEBUG is not set
FREETZ_TARGET_UCLIBC_REDUCED_LOCALE_SET=y
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
# FREETZ_TARGET_TOOLCHAIN is not set
#
# Both kernel and target toolchain related options ----------
#
FREETZ_TOOLCHAIN_MINIMIZE_REQUIRED_GLIBC_VERSION=y
# FREETZ_TOOLCHAIN_32BIT is not set
# FREETZ_TOOLCHAIN_CCACHE is not set
#
# Build system options
#
FREETZ_VERBOSITY_LEVEL=2
FREETZ_SIZEINFO_COMPRESSED=y
# FREETZ_SIZEINFO_UNCOMPRESSED is not set
FREETZ_JLEVEL=2
FREETZ_CHECK_CHANGED=y
# FREETZ_BACKUP_CONFIG_CACHE is not set
#
# Firmware packaging (fwmod) options
#
# FREETZ_FWMOD_SKIP_UNPACK is not set
# FREETZ_FWMOD_SKIP_MODIFY is not set
# FREETZ_FWMOD_SKIP_PACK is not set
# FREETZ_FWMOD_FORCE_PACK is not set
# FREETZ_FWMOD_USBROOT is not set
# FREETZ_FWMOD_NFSROOT is not set
#
# SquashFS options
#
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_262144 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_524288 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_1048576 is not set
FREETZ_SQUASHFS_BLOCKSIZE=65536
#
# Strip options
#
FREETZ_STRIP_BINARIES=y
# FREETZ_STRIP_LIBRARIES is not set
# FREETZ_STRIP_MODULES_NONE is not set
FREETZ_STRIP_MODULES_FREETZ=y
# FREETZ_STRIP_MODULES_ALL is not set
# FREETZ_STRIP_SCRIPTS is not set
#
# Override options
#
FREETZ_DL_SITE_USER=""
FREETZ_DL_TOOLCHAIN_SITE=""
FREETZ_DL_KERNEL_TOOLCHAIN_VERSION="r13181"
FREETZ_DL_KERNEL_TOOLCHAIN_MD5="6462a9c01566ae63ba6ad7db76037665"
FREETZ_DL_TARGET_TOOLCHAIN_VERSION="r13181"
FREETZ_DL_TARGET_TOOLCHAIN_MD5="05de49e2b2d91e5b3eb1ff4355db6c55"
FREETZ_DL_TOOLCHAIN_SUFFIX="shared-glibc"
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_KERNEL_SITE=""
FREETZ_DL_KERNEL_SOURCE_ID="7490_06.51"
FREETZ_DL_KERNEL_SOURCE="${FREETZ_DL_KERNEL_SOURCE_ID}-release_kernel.tar.xz"
FREETZ_DL_KERNEL_SOURCE_MD5="e4ed72a1182e7160de95579334685b0b"
FREETZ_DL_SITE="@AVM/fritzbox.7490/firmware/deutsch,@1&1/7490"
FREETZ_DL_SOURCE="FRITZ.Box_7490.113.06.51.image"
FREETZ_DL_SOURCE_MD5="7fb43ce53ba85509fa0c3002a3fe869c"
FREETZ_DL_SOURCE_CONTAINER=""
FREETZ_DL_SOURCE_CONTAINER_MD5=""
# FREETZ_AVM_HAS_FIRMWARE_04_XX is not set
# FREETZ_AVM_HAS_FIRMWARE_05_2X is not set
FREETZ_AVM_HAS_FIRMWARE_05_5X_VULNERABLE=y
FREETZ_AVM_HAS_FIRMWARE_05_5X=y
# FREETZ_AVM_HAS_FIRMWARE_EWE_05_5X is not set
FREETZ_AVM_HAS_FIRMWARE_06_0X=y
# FREETZ_AVM_HAS_FIRMWARE_EWE_06_0X is not set
FREETZ_AVM_HAS_FIRMWARE_06_2X=y
FREETZ_AVM_HAS_FIRMWARE_06_5X=y
FREETZ_AVM_HAS_FIRMWARE_LABOR=y
FREETZ_AVM_HAS_LANG_DE=y
# FREETZ_AVM_HAS_LANG_A_CH is not set
FREETZ_AVM_HAS_LANG_EN=y
FREETZ_AVM_HAS_LANG_EN_BE=y
# FREETZ_AVM_HAS_LANG_IT is not set
FREETZ_AVM_HAS_AHA=y
FREETZ_AVM_HAS_DECT=y
FREETZ_AVM_HAS_FHEM=y
FREETZ_AVM_HAS_MYFRITZ=y
FREETZ_AVM_HAS_MULTI_ANNEX=y
# FREETZ_AVM_HAS_ANNEX_A_AND_B is not set
FREETZ_AVM_HAS_NAS=y
FREETZ_AVM_HAS_NTFS=y
FREETZ_AVM_HAS_PHONE=y
# FREETZ_AVM_HAS_PLUGINS_UPDATE is not set
FREETZ_AVM_HAS_TAM=y
# FREETZ_AVM_HAS_TEMPERATURE_SENSOR is not set
FREETZ_AVM_HAS_TR069=y
FREETZ_AVM_HAS_TR069_FWUPDATE=y
FREETZ_AVM_HAS_UDEV=y
FREETZ_AVM_HAS_UMTS=y
FREETZ_AVM_HAS_USB_HOST=y
# FREETZ_AVM_HAS_USB_HOST_AHCI is not set
FREETZ_AVM_HAS_AURA_USB=y
# FREETZ_AVM_HAS_ETHERNET_OVER_USB is not set
FREETZ_AVM_HAS_WEBDAV=y
FREETZ_AVM_HAS_WLAN=y
FREETZ_AVM_HAS_IPV6=y
FREETZ_AVM_HAS_PTY_SUPPORT=y
FREETZ_AVM_HAS_PRINTK=y
FREETZ_AVM_HAS_EXT2_BUILTIN=y
FREETZ_AVM_HAS_EXT3_BUILTIN=y
FREETZ_AVM_HAS_EXT4_BUILTIN=y
# FREETZ_AVM_HAS_NLS_CP437_BUILTIN is not set
# FREETZ_AVM_HAS_NLS_ISO8859_1_BUILTIN is not set
# FREETZ_AVM_HAS_NLS_ISO8859_15_BUILTIN is not set
FREETZ_AVM_HAS_NLS_UTF8_BUILTIN=y
# FREETZ_AVM_HAS_ISOFS is not set
# FREETZ_AVM_HAS_JFFS2_MODULE is not set
# FREETZ_AVM_HAS_JFFS2_BUILTIN is not set
FREETZ_AVM_HAS_RAMZSWAP=y
# FREETZ_AVM_HAS_CRYPTO_ALGAPI_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_AEAD_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_AES_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_ARC4_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_BLKCIPHER_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_CBC_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_HASH_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_MANAGER_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_PCOMP_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_RNG_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_SHA1_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_SHA256_BUILTIN is not set
# FREETZ_AVM_HAS_CRYPTO_WORKQUEUE_BUILTIN is not set
# FREETZ_AVM_HAS_CDROM_ISO is not set
FREETZ_AVM_HAS_CHRONYD=y
FREETZ_AVM_HAS_E2FSPROGS=y
FREETZ_AVM_HAS_INETD=y
FREETZ_AVM_HAS_LSOF=y
# FREETZ_AVM_HAS_MICROVOIP_DSL is not set
# FREETZ_AVM_HAS_MINID is not set
FREETZ_AVM_HAS_OPENSSL=y
# FREETZ_AVM_HAS_OPENSSL_VERSION_0 is not set
FREETZ_AVM_HAS_OPENSSL_VERSION_1=y
# FREETZ_AVM_HAS_PIGLET_POTS is not set
# FREETZ_AVM_HAS_PIGLET_ISDN is not set
# FREETZ_AVM_HAS_SOCAT is not set
# FREETZ_AVM_HAS_STRACE is not set
FREETZ_AVM_HAS_AR7CFG_V12_MIN=y
# FREETZ_AVM_HAS_ALLCFGCONV_WITH_DECRYPTION_SUPPORT is not set
# FREETZ_AVM_HAS_DEBUG_CFG_SUPPORT is not set
# FREETZ_AVM_HAS_JUNK_BYTES is not set
FREETZ_AVM_HAS_MULTID_LEASES_FORMAT_V2=y
FREETZ_AVM_HAS_UPDATE_FILESYSTEM_IMAGE=y
FREETZ_AVM_HAS_EXT2_SQUASHFS4_PACKAGING_SCHEME=y
FREETZ_FILESYSTEM_MTD_SIZE=0
FREETZ_AVM_VERSION_06_5X=y
FREETZ_AVM_VERSION_04_XX_MIN=y
FREETZ_AVM_VERSION_05_2X_MIN=y
FREETZ_AVM_VERSION_05_5X_MIN=y
FREETZ_AVM_VERSION_06_0X_MIN=y
FREETZ_AVM_VERSION_06_2X_MIN=y
FREETZ_AVM_VERSION_06_5X_MIN=y
# FREETZ_AVM_VERSION_04_XX_MAX is not set
# FREETZ_AVM_VERSION_05_2X_MAX is not set
# FREETZ_AVM_VERSION_05_5X_MAX is not set
# FREETZ_AVM_VERSION_06_0X_MAX is not set
# FREETZ_AVM_VERSION_06_2X_MAX is not set
FREETZ_AVM_VERSION_06_5X_MAX=y
FREETZ_TARGET_ARCH_BE=y
FREETZ_TARGET_ARCH="mips"
FREETZ_TARGET_CROSS="${FREETZ_TARGET_ARCH}-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_KERNEL_CROSS="${FREETZ_TARGET_ARCH}-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
# FREETZ_AVM_GCC_3_4 is not set
# FREETZ_AVM_GCC_4_6 is not set
# FREETZ_AVM_GCC_4_7 is not set
FREETZ_AVM_GCC_4_8=y
# FREETZ_AVM_GCC_4_9 is not set
FREETZ_AVM_GCC_3_4_MIN=y
FREETZ_AVM_GCC_4_6_MIN=y
FREETZ_AVM_GCC_4_7_MIN=y
FREETZ_AVM_GCC_4_8_MIN=y
# FREETZ_AVM_GCC_4_9_MIN is not set
# FREETZ_AVM_GCC_3_4_MAX is not set
# FREETZ_AVM_GCC_4_6_MAX is not set
# FREETZ_AVM_GCC_4_7_MAX is not set
FREETZ_AVM_GCC_4_8_MAX=y
FREETZ_AVM_GCC_4_9_MAX=y
# FREETZ_KERNEL_VERSION_2_6_13 is not set
# FREETZ_KERNEL_VERSION_2_6_19 is not set
# FREETZ_KERNEL_VERSION_2_6_28 is not set
# FREETZ_KERNEL_VERSION_2_6_32_41 is not set
# FREETZ_KERNEL_VERSION_2_6_32_60 is not set
# FREETZ_KERNEL_VERSION_2_6_32_61 is not set
# FREETZ_KERNEL_VERSION_2_6_32 is not set
FREETZ_KERNEL_VERSION_3_10_73=y
FREETZ_KERNEL_VERSION_3_10=y
FREETZ_KERNEL_VERSION="3.10"
FREETZ_KERNEL_VERSION_MAJOR="3.10"
FREETZ_KERNEL_VERSION_2_6_13_MIN=y
FREETZ_KERNEL_VERSION_2_6_19_MIN=y
FREETZ_KERNEL_VERSION_2_6_28_MIN=y
FREETZ_KERNEL_VERSION_2_6_32_MIN=y
FREETZ_KERNEL_VERSION_3_10_MIN=y
# FREETZ_KERNEL_VERSION_2_6_13_MAX is not set
# FREETZ_KERNEL_VERSION_2_6_19_MAX is not set
# FREETZ_KERNEL_VERSION_2_6_28_MAX is not set
# FREETZ_KERNEL_VERSION_2_6_32_MAX is not set
FREETZ_KERNEL_VERSION_3_10_MAX=y
FREETZ_KERNEL_LAYOUT_VR9=y
FREETZ_KERNEL_LAYOUT="vr9"
FREETZ_MODULES_KVER="3.10.73"
FREETZ_KERNEL_PATCHES="3.10.73"
# FREETZ_AVM_UCLIBC_0_9_28 is not set
# FREETZ_AVM_UCLIBC_0_9_29 is not set
# FREETZ_AVM_UCLIBC_0_9_32 is not set
FREETZ_AVM_UCLIBC_0_9_33=y
FREETZ_AVM_UCLIBC_NPTL_ENABLED=y
FREETZ_AVM_SOURCE_7490_06_51=y
FREETZ_AVM_SOURCE_ID="7490_06.51"
FREETZ_AVM_SOURCE_FOR_KERNEL_LAYOUT_VR9=y
FREETZ_GCC_ABI="32"
FREETZ_GCC_ARCH="mips32r2"
FREETZ_GCC_TUNE="24kc"
FREETZ_GCC_FLOAT_ABI="soft"
FREETZ_REPLACE_KERNEL_AVAILABLE=y
FREETZ_REPLACE_KERNEL_EXPERIMENTAL=y
FREETZ_REPLACE_MODULE_AVAILABLE=y
FREETZ_TYPE_PREFIX="7490"
FREETZ_TYPE_PREFIX_SERIES_SUBDIR="06_5X"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
# FREETZ_CIFS_SUPPORT_NEEDS_REPLACE_KERNEL is not set
FREETZ_CIFS_SUPPORT_AVAILABLE=y
FREETZ_NFS_SUPPORT_NEEDS_REPLACE_KERNEL=y
FREETZ_NFS_SUPPORT_AVAILABLE=y
FREETZ_NFS_SUPPORT_AVAILABLE_AS_MODULE=yDie serielle Konsole liefert nach dem Klick auf "Reboot" im Freetz-Webinterface Folgendes:
Code:
[ 3179.460000] kdsld: kdsld_vcc_preunregister: *
[ 3182.730000] AVM_WATCHDOG_disable()
[ 3184.880000] SQUASHFS error: Major/Minor mismatch, older Squashfs 0.0 filesystems are unsupported
[ 3191.990000] [avm_urlader_env_set_variable] opening ID 0x198 for writing
[ 3192.080000] SysRq : Emergency Sync
[ 3192.080000] SysRq : Emergency Remount R/O
[ 3195.610000] [avm_power] PowerManagmentRelease(0x8f13bb80)
[ 3195.930000] __gmac_dev_event: ath0: 0x9 (NETDEV_GOING_DOWN), pid=3838 (hostapd)
[ 3195.980000] __gmac_dev_event: ath0: 0x2 (NETDEV_DOWN), pid=3838 (hostapd)
[ 3196.330000] __gmac_dev_event: ath1: 0x9 (NETDEV_GOING_DOWN), pid=3838 (hostapd)
[ 3196.380000] __gmac_dev_event: ath1: 0x2 (NETDEV_DOWN), pid=3838 (hostapd)
[ 3197.660000] [avmnet] [avmnet_phy_wasp_poll] setting status for device wasp failed.
[ 3197.660000] __gmac_dev_event: ath0: 0x6 (NETDEV_UNREGISTER), pid=7598 (busybox)
[ 3197.710000] get_ul_manager: error: ll_handle= (null)
[ 3197.710000] __gmac_dev_event: ath0: 0x11 (NETDEV_UNREGISTER_FINAL), pid=7598 (busybox)
[ 3197.720000] __gmac_dev_event: wifi0: 0x6 (NETDEV_UNREGISTER), pid=7598 (busybox)
[ 3197.770000] [avm_power] PowerManagmentRelease(0x8f14c700)
[ 3197.770000] Res
ROM VER: 1.1.4
CFG 05
** START
RVEC bf200000
[-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\]
(AVM) EVA Revision: 1.1964 Version: 2964
(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (1) 3 0x0-0x740D
[FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 16 sectors a 64kB)
[NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW
[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
.Atheros 8030/35 detected
Eva_AVM >##..................................................
Lantiq xDSL CPE VR9
phym = 10000000, mem = 10000000, max_pfn = 00010000
Reserving memory for CP1 @0xb0000000, size 0x00000000
plat_device_tree_setup: AVM hardware subrevision 5
plat_device_tree_setup: Missing device-tree for AVM hardware subrevision 5
Lantiq xDSL CPE VR9
Lantiq xDSL CPE VR9Ich sehe keinen wesentlichen Unterschied zum vorheringen Protokoll (als ich in Freetz noch einige Pakete ausgewählt hatte). Meine HWRevision 5 ist laut http://www.ip-phone-forum.de/showthread.php?t=275803 anscheinend nicht Besonderes.
PeterPawn
IPPF-Urgestein
- Mitglied seit
- 10 Mai 2006
- Beiträge
- 15,268
- Punkte für Reaktionen
- 1,750
- Punkte
- 113
Wenn ich das richtig sehe, wird im Freetz extra das Konfigurieren der Tabelle der Hardware-Revisionen (das erfolgt wohl in init_avm_kernel_config()) auskommentiert. Es mag Gründe dafür geben/gegeben haben ... ehe ich das versuche zu verfolgen, würde ich Dir vorschlagen, daß Du einfach einmal die Erweiterung "patch" der Datei make/linux/patches/3.10.73/170-init_avm_kernel_config.patch änderst (dann wird der Patch nicht mehr angewendet) und schaust, was dann mit einem so gebauten Kernel passiert. Da ich nicht sicher bin, wann da die Patches angewendet werden, müßtest Du selbst irgendwie absichern, daß vorherige Ergebnisse passend gelöscht werden.
So sieht der Patch für das Auskommentieren von init_avm_kernel_config() direkt vor dem fehlschlagenden Aufruf von plat_device_tree_setup() aus und in der auskommentierten Funktion steht nach meiner Recherche der einzige Code, der die passenden Pointer in der avm_kernel_config_device_tree-Struktur setzt:
Wenn es also Gründe gibt oder gab, diesen Aufruf auszukommentieren, findet man das sicherlich auch noch heraus ... ich würde trotzdem erst einmal probieren, was mit aktiviertem Aufruf von init_avm_kernel_config() passiert, bevor man sich an die (vermutlich langwierige) Suche nach der Ursache dieses Patches macht.
PS: Die .config bitte als Anhang, das Herauskopieren aus dem Beitrag ist doch eher mühsam. Danke. (Auch wenn ich noch nicht eine Zeile selbst übersetzt habe, ist das ein Hinweis für weitere Beiträge.)
Code:
--- linux-3.10/arch/mips/kernel/setup.c
+++ linux-3.10/arch/mips/kernel/setup.c
@@ -793,7 +793,7 @@
prom_init();
- init_avm_kernel_config();
+// init_avm_kernel_config();
plat_device_tree_setup();
Code:
case avm_kernel_config_tags_device_tree_subrev_0 ... avm_kernel_config_tags_device_tree_subrev_last: {
unsigned int index = p->tag - avm_kernel_config_tags_device_tree_subrev_0;
pr_err("[%s] %s: device-tree for subrev %d found\n", __func__, intro, index);
[COLOR="#FF0000"]avm_kernel_config_device_tree[index] = (unsigned char *)((unsigned long)p->config + 0x00UL);[/COLOR].
}
break;PS: Die .config bitte als Anhang, das Herauskopieren aus dem Beitrag ist doch eher mühsam. Danke. (Auch wenn ich noch nicht eine Zeile selbst übersetzt habe, ist das ein Hinweis für weitere Beiträge.)
Merkwürdig. Klingt nach einer guten Erklärung. Aber ich bin nicht weitergekommen.
Zunächst habe ich die 170-init_avm_kernel_config.patch-Datei umbenannt, make kernel-dirclean und dann make gesagt: keine Änderung mit dem neuen Image. Selbst nachdem ich die 170-init_avm_kernel_config.patch gelöscht hatte und make distclean im trunk-Verzeichnis ausgeführt hatte, lieferte das neu gebaute Image wieder:
Code:
[ 333.580000] kdsld: kdsld_vcc_preunregister: *
[ 336.960000] AVM_WATCHDOG_disable()
[ 339.100000] SQUASHFS error: Major/Minor mismatch, older Squashfs 0.0 filesystems are unsupported
[ 346.140000] [avm_urlader_env_set_variable] opening ID 0x198 for writing
[ 346.230000] SysRq : Emergency Sync
[ 346.230000] SysRq : Emergency Remount R/O
[ 351.350000] [avm_power] PowerManagmentRelease(0x8f226680)
[ 351.650000] __gmac_dev_event: ath0: 0x9 (NETDEV_GOING_DOWN), pid=3624 (hostapd)
[ 351.700000] __gmac_dev_event: ath0: 0x2 (NETDEV_DOWN), pid=3624 (hostapd)
[ 352.030000] __gmac_dev_event: ath1: 0x9 (NETDEV_GOING_DOWN), pid=3624 (hostapd)
[ 352.080000] __gmac_dev_event: ath1: 0x2 (NETDEV_DOWN), pid=3624 (hostapd)
[ 353.130000] __gmac_dev_event: ath0: 0x6 (NETDEV_UNREGISTER), pid=6587 (busybox)
[ 353.190000] __gmac_dev_event: ath0: 0x11 (NETDEV_UNREGISTER_FINAL), pid=6587 (busybox)
[ 353.190000] __gmac_dev_event: wifi0: 0x6 (NETDEV_UNREGISTER), pid=6587 (busybox)
[ 353.250000] __gmac_dev_event: wifi0: 0x11 (NETDEV_UNREGISTER_FINAL), pid=6587 (busybox)
[ 353.250000] __gmac_dev_event: ath1: 0x6 (NETDEV_UNREGISTER), pid=6587 (busybox)
[ 353.300000] __gmac_dev_event: ath1: 0x11 (NETDEV_UNREGISTER_FINAL), pid=6587 (busybox)
[ 353.300000] __gmac_dev_event: wifi1: 0x6 (NETDEV_UNREGISTER), pid=6587 (busybox)
[ 353.350000] __gmac_dev_event: wifi1: 0x11 (NETDEV_UNREGISTER_FINAL), pid=6587 (busybox)
[ 353.450000] get_ul_manager: error: ll_handle= (null)
[ 353.450000] [pcmlink_ul]rxget_slotdata: no register
[ 353.450000] [pcmlink_ul]rxfree_slotdata: no register
[ 353.460000] get_ul_manager: error: ll_handle= (null)
[ 353.510000] [avm_power] PowerManagmentRelease(0x8f161f00)
[ 353.510000] Res
ROM VER: 1.1.4
CFG 05
** START
RVEC bf200000
[-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\][|][/][-][\]
(AVM) EVA Revision: 1.1964 Version: 2964
(C) Copyright 2005 AVM Date: Nov 27 2013 Time: 14:33:10 (1) 3 0x0-0x740D
[FLASH:] MACRONIX Uniform-Flash 1MB 256 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 16 sectors a 64kB)
[NAND:] 512MB MICRON 2048 Pagesize 128k Blocksize 4096 Blocks 8Bit 1 CS HW
[SYSTEM:] VR9 on 500MHz/250MHz/250MHz
.Atheros 8030/35 detected
Eva_AVM >##..................................................
Lantiq xDSL CPE VR9
phym = 10000000, mem = 10000000, max_pfn = 00010000
Reserving memory for CP1 @0xb0000000, size 0x00000000
plat_device_tree_setup: AVM hardware subrevision 5
plat_device_tree_setup: Missing device-tree for AVM hardware subrevision 5
Lantiq xDSL CPE VR9
Lantiq xDSL CPE VR9Ich habe sogar sichergestellt, dass die Datei
linux-3.10/arch/mips/kernel/setup.c
den gewünschten Aufruf von init_avm_kernel_config() enthält.Ist die init_avm_kernel_config() evtl. nicht mit Freetz kompatibel?
Ich hänge gerne beim nächsten Mal meine .config-Datei an, aber im Augenblick bekomme ich ein leeres Fenster, wenn ich auf Anhänge verwalten klicke.
PeterPawn
IPPF-Urgestein
- Mitglied seit
- 10 Mai 2006
- Beiträge
- 15,268
- Punkte für Reaktionen
- 1,750
- Punkte
- 113
Ok, dann zusätzliche Debug-Ausgaben (wie das geht, sieht man ja an den bereits vorhandenen Stellen, wo etwas ausgegeben wird) einbauen, die die einzelnen Schritte in init_avm_kernel_config() dokumentieren. Wenn man sich das ansieht, ist das ja auch nur das Kopieren aus einem statischen Bereich im Kernel (das sind 64 * 1024 Byte, die da zwischen __avm_kernel_config_start und __avm_kernel_config_end reserviert werden, dieser Bereich liegt bei meinem originalen AVM-Kernel für die 06.51 an der Adresse 0x80859000-0x80869000, seine Adresse wird über init_avm_kernel_config_ptr() "ausgelesen") in diesen Bereich avm_kernel_config bzw. avm_kernel_config_device_tree.
Dieses Kopieren setzt natürlich voraus, daß es an der Stelle __avm_kernel_config_start überhaupt einen passenden Pointer gibt, der auf zu kopierende Elemente verweist, beim originalen AVM-Kernel ist das der Fall, wie man mit devmem leicht feststellen kann:
Nun enthält der ursprüngliche Code in init/avm_kernel_config.c ja schon einige solcher Nachrichten (z.B. in Zeile 18 die entsprechende Protokollierung beim "Betreten" der Funktion) und da verblüfft es schon etwas, wenn sich bei einem Aufruf von init_avm_kernel_config so gar nichts unterscheiden soll von der Version ohne einen solchen Aufruf. Es könnte noch sein, daß da am "printk"-Level gedreht wurde/wird, das könnte man mit einem beherzten "ignore_loglevel" (https://www.kernel.org/doc/Documentation/kernel-parameters.txt) als mögliche Ursache der fehlenden Protokolleinträge ausschließen (einfach über den Bootloader als "kernel_args" eintragen).
Allerdings gibt es auch eine AVM-Funktion irgendwo im debug-Teil (drivers/char/avm_new/avm_debug.c), die wieder die "printk"-Funktion oder zumindest deren Ausgabe irgendwohin umleiten will oder soll ... das ist alles etwas wenig durchsichtig.
Da ja feststeht, daß der Aufruf von "prom_printf" (z.B. in ifxmips_setup.c) zu einer sichtbaren Nachricht auf der Seriellen führt, würde ich - wenn das oben stehende mit "ignore_loglevel" die "pr_err"-Nachrichten (das ist auch nur ein Makro für "printk(KERN_ERR ...)" und das sollte eigentlich eine Ausgabe erzeugen, weil KERN_WARNING das Standard-Level ist) nicht hervorzaubern kann - die pr_err-Aufrufe durch prom_printf ersetzen ... ich sehe keine andere sinnvolle Möglichkeit, als dem Problem mittels solcher "traces" anhand von Nachrichten auf den Grund zu gehen.
Der andere Ansatz wäre die Frage, wo und wie die Daten an die Stelle __avm_kernel_config_start gelangen könnten ... ich gehe davon aus, daß da irgendwie der Bereich mit statischen Daten überlagert wird an irgendeiner Stelle beim Linken, das ist aber auch eher mühsam zu suchen - mir fiele nur der Weg über die Adresse aus der system.map ein, wenn da irgendwelche Symbole zwischen __avm_kernel_config_start und __avm_kernel_config_end liegen sollten.
- - - Aktualisiert - - -
Ich habe gerade mal aus Interesse ein System mit und ohne "ignore_loglevel" auf der FRITZ!Box gestartet ... das gibt genau gar keinen Unterschied (zumindest in der Ausgabe, die bereits gepuffert wird und von "dmesg" angezeigt werden kann). Damit stellt sich die Frage, wo die Ausgabe von "pr_err" am Ende landet ... offenbar ja auch nicht in der seriellen Konsole (die bei mir auch nicht bestückt ist, daher kann ich selbst nichts richtig testen).
Code:
$ grep kernel_config /proc/kallsyms
80010200 T init_avm_kernel_config
[COLOR="#FF0000"]80859000 D __avm_kernel_config_start
80869000 D __avm_kernel_config_end[/COLOR]
808b2080 B avm_kernel_config_device_tree
808b20b0 B avm_kernel_config
Code:
$ devmem $(( 0x0859000 )) 32
0x80859010Allerdings gibt es auch eine AVM-Funktion irgendwo im debug-Teil (drivers/char/avm_new/avm_debug.c), die wieder die "printk"-Funktion oder zumindest deren Ausgabe irgendwohin umleiten will oder soll ... das ist alles etwas wenig durchsichtig.
Da ja feststeht, daß der Aufruf von "prom_printf" (z.B. in ifxmips_setup.c) zu einer sichtbaren Nachricht auf der Seriellen führt, würde ich - wenn das oben stehende mit "ignore_loglevel" die "pr_err"-Nachrichten (das ist auch nur ein Makro für "printk(KERN_ERR ...)" und das sollte eigentlich eine Ausgabe erzeugen, weil KERN_WARNING das Standard-Level ist) nicht hervorzaubern kann - die pr_err-Aufrufe durch prom_printf ersetzen ... ich sehe keine andere sinnvolle Möglichkeit, als dem Problem mittels solcher "traces" anhand von Nachrichten auf den Grund zu gehen.
Der andere Ansatz wäre die Frage, wo und wie die Daten an die Stelle __avm_kernel_config_start gelangen könnten ... ich gehe davon aus, daß da irgendwie der Bereich mit statischen Daten überlagert wird an irgendeiner Stelle beim Linken, das ist aber auch eher mühsam zu suchen - mir fiele nur der Weg über die Adresse aus der system.map ein, wenn da irgendwelche Symbole zwischen __avm_kernel_config_start und __avm_kernel_config_end liegen sollten.
- - - Aktualisiert - - -
Ich habe gerade mal aus Interesse ein System mit und ohne "ignore_loglevel" auf der FRITZ!Box gestartet ... das gibt genau gar keinen Unterschied (zumindest in der Ausgabe, die bereits gepuffert wird und von "dmesg" angezeigt werden kann). Damit stellt sich die Frage, wo die Ausgabe von "pr_err" am Ende landet ... offenbar ja auch nicht in der seriellen Konsole (die bei mir auch nicht bestückt ist, daher kann ich selbst nichts richtig testen).
z. Info: 170-init_avm_kernel_config.patch wurde zum ersten Mal in r11272 eingecheckt mit ref auf #2180. Welches Problem konkret dabei behoben wurde, kann ich weder aus der Commit-Message noch aus dem referenzierten Ticket ableiten. Der andere Part von r11272 (das Entfernen vom lzma-Patch und das Aktivieren von yaffs) ergibt viel mehr Sinn.
Für 3.10 habe ich den Patch einfach übernommen, ohne nachzuforschen, welches Problem er behebt. Stand jetzt spricht aus meiner Sicht nichts dagegen ihn wieder zu entfernen (meinetwegen auch für 2.6.32). Patches, wo nicht klar ist / nicht dokumentiert ist, welchen Mehrwert sie bringen, gehören meiner Meinung nach generell entfernt.
Edit: vielleicht kann Oliver sich erinnern, was es mit dem 170-... auf sich hat.
Für 3.10 habe ich den Patch einfach übernommen, ohne nachzuforschen, welches Problem er behebt. Stand jetzt spricht aus meiner Sicht nichts dagegen ihn wieder zu entfernen (meinetwegen auch für 2.6.32). Patches, wo nicht klar ist / nicht dokumentiert ist, welchen Mehrwert sie bringen, gehören meiner Meinung nach generell entfernt.
Edit: vielleicht kann Oliver sich erinnern, was es mit dem 170-... auf sich hat.
PeterPawn
IPPF-Urgestein
- Mitglied seit
- 10 Mai 2006
- Beiträge
- 15,268
- Punkte für Reaktionen
- 1,750
- Punkte
- 113
Auch die andere Möglichkeit (daß die Nachrichten beim Kompilieren des AVM-Kernels gar nicht erst eingebunden wurden) kann man getrost ausschließen, ein entpackter (AVM-)Kernel der 06.51 enthält genau die erwarteten Nachrichten:
Damit bleibt für mich die Frage offen, was um Himmels Willen das System davon abhält, die "pr_err"-Ausgaben auf der seriellen Konsole anzuzeigen. Da die Ausgabe "Missing device-tree ..." ja erst nach init_avm_kernel_config() auftauchen kann/soll, müßte eigentlich so ein printk-Aufruf auch sichtbar sein. Aber beim derzeitigen Stand ist vermutlich das Ersetzen von pr_err durch prom_printf die einfachere Lösung, damit man zumindest mal den erwarteten Weg nachverfolgen kann.
Da der AVM-Kernel die Nachrichten ja offenbar auch enthält und sie wohl trotzdem nicht auf der seriellen Konsole ausgibt, muß da ja irgendetwas anderes diese Nachrichten unterdrücken oder diese Funktion würde tatsächlich auch im AVM-Kernel nicht aufgerufen ... was dann wieder die Frage aufwirft, was sie in den veröffentlichten Quellen zu suchen hätte. Da neige ich eher dazu, daß sie wirklich benötigt wird (das Fehlerbild mit dem fehlenden Eintrag in avm_kernel_config_device_tree spricht ja irgendwie auch dafür) und daß unter "Freetz-Bedingungen" am Ende das "Ausgangsmaterial" für das Kopieren fehlt - was dann aber die Frage, wohin die printk-Nachrichten verschwinden (auch die im AVM-Kernel), weiterhin offen läßt.
- - - Aktualisiert - - -
Ich würde es ohnehin besser finden, wenn mal jemand einen Moderator/Admin um das Abtrennen des "replace kernel"-Themas vom Rest des Threads bittet ... das liest schon wieder kein Mensch mehr in Gänze hier und in diesem Thread wurden so viele unterschiedliche Probleme behandelt, daß es auch wenig Sinn macht, das mit einem anderen Thread-Titel und/oder durch das Entfernen von "[solved]" wieder aufzuwärmen.
Ich kann den Impuls, sich hier anzuhängen, verstehen ... für sinnvoll halte ich ihn trotzdem nicht. Diese "replace kernel"-Problematik dürfte auch alle anderen VR9-Modelle mit 3.10.73-Kernel betreffen, vermutlich auch die AR10-Modelle. Das sollte in jedem Falle einen neuen Thread wert sein, der sich auch wirklich nur diesem Thema widmet.
Vielleicht kann das Oliver ja gleich mitmachen, wenn er sich dazu äußern sollte ...
Code:
$ strings kernel.unpacked | grep -C 10 "version info entry"
/dev/root
6Waiting %dsec before mounting root device...
6Waiting for root device %s...
/dev/ram
/initrd.image
3[%s] %s (ptr %p)
AVM Kernel Config
3[%s] %s: internal error, should not be reached.
3[%s] %s: undef entry
3[%s] %s: module memory entry
3[%s] %s: version info entry
3[%s] %s: unhandled avmnet entry
3[%s] %s: unhandled hw_config entry
3[%s] %s: unhandled cache_config entry
[COLOR="#FF0000"]3[%s] %s: device-tree for subrev %d found[/COLOR]
3[%s] %s failed
junk in compressed archive
can't allocate buffers
decompressor failed
compression method %s not configured
broken paddingDa der AVM-Kernel die Nachrichten ja offenbar auch enthält und sie wohl trotzdem nicht auf der seriellen Konsole ausgibt, muß da ja irgendetwas anderes diese Nachrichten unterdrücken oder diese Funktion würde tatsächlich auch im AVM-Kernel nicht aufgerufen ... was dann wieder die Frage aufwirft, was sie in den veröffentlichten Quellen zu suchen hätte. Da neige ich eher dazu, daß sie wirklich benötigt wird (das Fehlerbild mit dem fehlenden Eintrag in avm_kernel_config_device_tree spricht ja irgendwie auch dafür) und daß unter "Freetz-Bedingungen" am Ende das "Ausgangsmaterial" für das Kopieren fehlt - was dann aber die Frage, wohin die printk-Nachrichten verschwinden (auch die im AVM-Kernel), weiterhin offen läßt.
- - - Aktualisiert - - -
Ich würde es ohnehin besser finden, wenn mal jemand einen Moderator/Admin um das Abtrennen des "replace kernel"-Themas vom Rest des Threads bittet ... das liest schon wieder kein Mensch mehr in Gänze hier und in diesem Thread wurden so viele unterschiedliche Probleme behandelt, daß es auch wenig Sinn macht, das mit einem anderen Thread-Titel und/oder durch das Entfernen von "[solved]" wieder aufzuwärmen.
Ich kann den Impuls, sich hier anzuhängen, verstehen ... für sinnvoll halte ich ihn trotzdem nicht. Diese "replace kernel"-Problematik dürfte auch alle anderen VR9-Modelle mit 3.10.73-Kernel betreffen, vermutlich auch die AR10-Modelle. Das sollte in jedem Falle einen neuen Thread wert sein, der sich auch wirklich nur diesem Thema widmet.
Vielleicht kann das Oliver ja gleich mitmachen, wenn er sich dazu äußern sollte ...
@printk: man beachte den 180-patch_printk.sh-Patch (hier die History). Fragt mich aber bitte nicht, wozu er gut ist. Vielleicht reicht es, den Patch mal auszuschalten, damit die Meldungen auftauchen...
PeterPawn
IPPF-Urgestein
- Mitglied seit
- 10 Mai 2006
- Beiträge
- 15,268
- Punkte für Reaktionen
- 1,750
- Punkte
- 113
Ich gehe davon aus, daß dieser Patch mit dem AVM-Debug-Device in Verbindung steht ... aber das ist ohnehin "so spät" im Boot-Prozess, daß die Box mit dem ersetzten Kernel da ja nie vorbeikommt.
Ich werfe nachher mal einen Blick in dieses "avm_debug.c" ... mir ist irgendwo im Hinterkopf so, als würde da die Adresse von "printk" überschrieben - zumindest bilde ich mir ein, früher mal etwas in dieser Richtung im Zusammenhang mit dem Debuggen und AVM-Code gesehen zu haben (auch i.V.m. dem avmlogd); aber das ist alles lange her und ich kann mich auch problemlos irren, daher schaue ich lieber noch einmal nach.
Ich werfe nachher mal einen Blick in dieses "avm_debug.c" ... mir ist irgendwo im Hinterkopf so, als würde da die Adresse von "printk" überschrieben - zumindest bilde ich mir ein, früher mal etwas in dieser Richtung im Zusammenhang mit dem Debuggen und AVM-Code gesehen zu haben (auch i.V.m. dem avmlogd); aber das ist alles lange her und ich kann mich auch problemlos irren, daher schaue ich lieber noch einmal nach.
Neueste Beiträge
-
[Problem] FritzBox 7590 2,4GHz WLAN nur noch sehr sehr schwach
- Letzte: rauchfreiezone
-
Fritz!DECT 302 regelt nicht mehr- Letzte: Jstessi
-
Frühere Gigaset Pro Modelle an Gigaset N670 IP Pro anmelden
- Letzte: tiago.bln
-
[Frage] Eigener VDSL2 Master / DSLAM ?
- Letzte: gamerpaddy2
-
FRITZ!Box 7590 / FRITZ!OS 8.00 vom 31.10.2024
- Letzte: zorro neu
-
[Sammlung] Fritz!Box 5690Pro, Inhaus/Labor 7.90, Pfad 'Smart24P1FCS'
- Letzte: zorro neu
-
Mitel 400 Private Kontakte nicht im Telefonbuch
- Letzte: Qbaah
-