Ich habe eine 6591 mit unbekanntem Vorleben erhalten. Ich kann adam2 erreichen und auch darüber flashen. Nur leider stockt der Bootprozess.
Das ausgelesene Environment sieht intakt aus, bis auf den Umstand, daß das Retailflag auf y(es) steht, die Firmwareversion aber auf lgi.
Anmerkung: Ein paar Werte fürs Forum verfälscht
Dank @PeterPawn s genialen Scripten habe ich mir aus der env+count ein tffs-image erstellt. Nur fehlt mir eine Idee, wie ich das ggfs. per Bootloader auf die Box bekomme? In der https://bitbucket.org/fesc2000/ffritz/src/6591/README-6591.md von @fesc steht etwas zum TFFS nur ist dies wohl nicht per adam2 erreichbar.
Ich habe in Mutterns Nähkästchen tatsächlich zwei lange Nadel gefunden, die perfekt und stramm in die TX RX-Löchern der Atom UART durchs Gehäuse passen.
GROUND habe ich vom F-Stecker genommen, da keine weitere langenuge Nadel vorhanden.
Mit angepasstem Kernel lt. @fesc stoppt der Bootvorgang in der Efi-shell.
Anmerkung: der CALL TRACE: Abschnitt wiederholt sich nach einigen Minuten
Ich kann leider nicht erkennen, ob eine/r der VorbesitzerInnen Debrandingversuche unternommen hat inkl. Briefbeschwerer oder ein Hardwaredefekt vorliegt. Falls einer der Experten mir ein paar Tipps geben könnte, wie ich in der EFI-shell etwas Testen oder Verändern kann, würde ich mich sehr freuen.
Das ausgelesene Environment sieht intakt aus, bis auf den Umstand, daß das Retailflag auf y(es) steht, die Firmwareversion aber auf lgi.
Code:
DMC RTL=y,postHSR=9
HWRevision 233
HWSubRevision 8
ProductID Fritz_Box_HW233
SerialNumber M23311111111111
annex Kabel
autoload yes
bootloaderVersion 1.3614
country 049
firstfreeaddress 0x3D3C4C00
firmware_info 161.07.57
firmware_version lgi
language de
linux_fs_start 1
maca 2C:91:AB:11:11:7B
macb 2C:91:AB:11:11:7C
macwlan 2C:91:AB:11:11:7D
macwlan2 2C:91:AB:11:11:7E
macdsl 2C:91:AB:11:11:78
memsize 0x40000000
mtd0 0x0,0x4800000
mtd1 0x4800000,0x5100000
mtd2 0x5100000,0x5300000
mtd3 0x5300000,0x5B00000
mtd4 0x0,0x0
mtd5 0x5B00000,0xDB00000
mtd6 0xDB00000,0xEE00000
mtd7 0xEE00000,0xF300000
mtd8 0x0,0x0
mtd10 0x0,0x0
mtd11 0xF300000,0x13B00000
mtd12 0x13B00000,0x14400000
mtd13 0x14400000,0x15700000
mtd14 0x15700000,0x15C00000
my_ipaddress 192.168.178.1
prompt Eva_AVM
provider
tr069_passphrase 4nu
tr069_serial 00040E-2C91AB11117B
usb_board_mac 2C:91:AB:11:11:79
usb_device_id 0x0000
usb_device_name USB DSL Device
usb_manufacturer_name AVM
usb_revision_id 0x0000
usb_rndis_mac 2C:91:AB:11:11:7A
webgui_pass krumm1234
wlan_key 111111111111111111
wlan_ssid FRITZ!Box#6591#Cable#ZZAnmerkung: Ein paar Werte fürs Forum verfälscht
Dank @PeterPawn s genialen Scripten habe ich mir aus der env+count ein tffs-image erstellt. Nur fehlt mir eine Idee, wie ich das ggfs. per Bootloader auf die Box bekomme? In der https://bitbucket.org/fesc2000/ffritz/src/6591/README-6591.md von @fesc steht etwas zum TFFS nur ist dies wohl nicht per adam2 erreichbar.
Ich habe in Mutterns Nähkästchen tatsächlich zwei lange Nadel gefunden, die perfekt und stramm in die TX RX-Löchern der Atom UART durchs Gehäuse passen.
GROUND habe ich vom F-Stecker genommen, da keine weitere langenuge Nadel vorhanden.Mit angepasstem Kernel lt. @fesc stoppt der Bootvorgang in der Efi-shell.
Code:
Shell> mm 0xfed94820 0x00914b49 -w 4
Shell> bootkernel
Kernel active image bank:1 Filesystem active image bank is: 1 f
Kernel command line specified: root=PARTUUID=624EF9C8-822B-4CAC-B142-C21C274CCFFE console=ttyS0,115200n8 loglevel=8 rootwait BoardID=0xE0 BoardRev=0x20 tuner=12,27
DTB found: efi\boot\Fritz_Box_HW233-0.dtb
EFI stub: DTB successfully loaded
[ 0.000000] Welcome to the AVM F!OS Linux kernel!
[ 0.000000] Linux version 4.9.279 ([email protected]) (gcc version 8.4.0 (Buildroot 2020.02.1-g53bf1c36) ) #1 SMP PREEMPT 2023-06-06
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000001000000-0x000000000ebfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ec00000-0x000000003de76fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003de77000-0x000000003e156fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003e157000-0x000000003e256fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003e257000-0x000000003e296fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003e297000-0x000000003e29cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003e29d000-0x000000003e29dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003e29e000-0x000000003e29ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003e2a0000-0x000000003e2a0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003e2a1000-0x000000003ebfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] e820: update [mem 0x3de74000-0x3de7641d] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000bfffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000001000000-0x000000000ebfffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000001ec00000-0x000000003de73fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000003de74000-0x000000003de7641d] usable
[ 0.000000] reserve setup_data: [mem 0x000000003de7641e-0x000000003de76fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000003de77000-0x000000003e156fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000003e157000-0x000000003e256fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000003e257000-0x000000003e296fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000003e297000-0x000000003e29cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000003e29d000-0x000000003e29dfff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000003e29e000-0x000000003e29ffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000003e2a0000-0x000000003e2a0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000003e2a1000-0x000000003ebfffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] efi: EFI v2.40 by EDK II
[ 0.000000] efi: SMBIOS=0x3deb1000 ACPI=0x3e296000 ACPI 2.0=0x3e296014
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: Intel Corporation PUMA 7 C0 PLATFORM/TBD, BIOS CGM2.86C.627075.R.1910091149 10/09/2019
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3ec00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 03F000000 mask FFF000000 uncachable
[ 0.000000] 3 base 03EC00000 mask FFFC00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x057fffff]
[ 0.000000] Base memory trampoline at [8009a000] 9a000 size 16384
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003E296014 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x000000003E2950E8 0000B4 (v01 INTEL EDK2 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000003E291000 00010C (v05 INTEL EDK2 00000003 CHV 0100000D)
[ 0.000000] ACPI: DSDT 0x000000003E282000 009391 (v02 INTEL EDK2 00000003 CHV 0100000D)
[ 0.000000] ACPI: FACS 0x000000003E20D000 000040
[ 0.000000] ACPI: SSDT 0x000000003E294000 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120518)
[ 0.000000] ACPI: UEFI 0x000000003E20F000 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: CGMT 0x000000003E293000 000030 (v01 INTEL EDK2 00000003 CHV 0100000D)
[ 0.000000] ACPI: HPET 0x000000003E290000 000038 (v01 INTEL EDK2 00000003 CHV 0100000D)
[ 0.000000] ACPI: LPIT 0x000000003E28F000 000104 (v01 INTEL EDK2 00000003 CHV 0100000D)
[ 0.000000] ACPI: MCFG 0x000000003E28D000 00003C (v01 INTEL EDK2 00000003 CHV 0100000D)
[ 0.000000] ACPI: PRAM 0x000000003E28C000 000030 (v01 INTEL EDK2 00000003 CHV 0100000D)
[ 0.000000] ACPI: SSDT 0x000000003E281000 000633 (v01 INTEL CpuDptf 00000003 CHV 0100000D)
[ 0.000000] ACPI: SSDT 0x000000003E280000 0008CF (v01 INTEL DptfTab 00000003 CHV 0100000D)
[ 0.000000] ACPI: SSDT 0x000000003E27F000 000058 (v01 INTEL LowPwrM 00000003 CHV 0100000D)
[ 0.000000] ACPI: SSDT 0x000000003E27E000 000499 (v01 PmRef CpuPm 00003000 INTL 20120518)
[ 0.000000] ACPI: SSDT 0x000000003E27D000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120518)
[ 0.000000] ACPI: SSDT 0x000000003E27C000 000096 (v01 PmRef ApTst 00003000 INTL 20120518)
[ 0.000000] ACPI: APIC 0x000000003E28E000 00006C (v03 INTEL EDK2 00000003 CHV 0100000D)
[ 0.000000] ACPI: CSRT 0x000000003E292000 00014C (v00 INTEL EDK2 00000003 CHV 0100000D)
[ 0.000000] ACPI: FPDT 0x000000003E27B00000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 2972 pages, LIFO batch:0
[ 0.000000] Normal zone: 1638 pages used for memmap
[ 0.000000] Normal zone: 186334 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] [fw-info] Version 07.57 buildnr=107841 buildtype=1
[ 0.000000] smpboot: 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x3ec00000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 18 pages/cpu s44684 r0 d29044 u73728
[ 0.000000] pcpu-alloc: s44684 r0 d29044 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 187641
[ 0.000000] Kernel command line: block2mtd.block2mtd=/dev/mmcblk0p15,131072 audit=1 root=PARTUUID=624EF9C8-822B-4CAC-B142-C21C274CCFFE console=ttyS0,115200n8 loglevel=8 rootwait BoardID=0xE0 BoardRev=0x20 tuner=12,27
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 579548K/757224K available (8148K kernel code, 1999K rwdata, 2360K rodata, 552K init, 12852K bss, 79372K reserved, 98304K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff90000 - 0xfffff000 ( 444 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xbf400000 - 0xff7fe000 (1027 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbec00000 (1004 MB)
[ 0.000000] .init : 0x8443b000 - 0x844c5000 ( 552 kB)
[ 0.000000] .data : 0x83ff53a4 - 0x84439d00 (4370 kB)
[ 0.000000] .text : 0x83800000 - 0x83ff53a4 (8148 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=b4008000 soft=b400a000
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Using HPET timer 2 for AVM NMI watchdog, irq 11.
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1999.815 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.63 BogoMIPS (lpj=1999815)
[ 0.011924] pid_max: defauI Controller Driver version: 0.5
[ 0.424071] avm_alloc_page_extension node_extension_table[0] entries=257023 (size=1028092) alloced
[ 0.434317] PCI: Using configuration type 1 for base access
[ 0.447857] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.472059] raid6: mmxx1 gen() 1367 MB/s
[ 0.493893] raid6: mmxx2 gen() 1753 MB/s
[ 0.515712] raid6: sse1x1 gen() 1464 MB/s
[ 0.537542] raid6: sse1x2 gen() 1523 MB/s
[ 0.559358] raid6: sse2x1 gen() 2914 MB/s
[ 0.581182] raid6: sse2x1 xor() 2074 MB/s
[ 0.603008] raid6: sse2x2 gen() 3074 MB/s
[ 0.624830] raid6: sse2x2 xor() 2414 MB/s
[ 0.629603] raid6: using algorithm sse2x2 gen() 3074 MB/s
[ 0.635639] raid6: .... xor() 2414 MB/s, rmw enabled
[ 0.641190] raid6: using ssse3x1 recovery algorithm
[ 0.646719] ACPI: Added _OSI(Module Device)
[ 0.651399] ACPI: Added _OSI(Processor Device)
[ 0.656368] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.661626] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.676130] ACPI: Dynamic OEM Table Load:
[ 0.680654] ACPI: SSDT 0x00000000B4192000 000676 (v01 PmRef Cpu0Ist 00003000 INTL 20120518)
[ 0.690650] ACPI: Dynamic OEM Table Load:
[ 0.695162] ACPI: SSDT 0x00000000B41BBC00 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
[ 0.705618] ACPI: Dynamic OEM Table Load:
[ 0.710129] ACPI: SSDT 0x00000000B41BAD80 00008D (v01 PmRef ApIst 00003000 INTL 20120518)
[ 0.719990] ACPI: Dynamic OEM Table Load:
[ 0.724501] ACPI: SSDT 0x00000000B418EC80 000047 (v01 PmRef ApCst 00003000 INTL 20120518)
[ 0.735392] ACPI: Interpreter enabled
[ 0.739527] ACPI: (supports S0 S5)
[ 0.743333] ACPI: Using IOAPIC for interrupt routing
[ 0.748956] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.761332] ACPI: Power Resource [PPWR] (on)
[ 0.766680] ACPI: Power Resource [USBF] (off)
[ 0.774657] ACPI: Power Resource [SPR0] (on)
[ 0.780028] ACPI: Power Resource [SPR1] (on)
[ 0.790398] ACPI: Power Resource [SGPR] (on)
[ 0.795277] ACPI: Power Resource [G5PR] (on)
[ 0.801095] ACPI: Power Resource [S0PR] (on)
[ 0.806408] ACPI: Power Resource [S1PR] (on)
[ 1.019136] ACPI: Power Resource [R0PR] (on)
[ 1.024855] ACPI: Power Resource [R1PR] (on)
[ 1.030826] ACPI: Power Resource [PEPR] (on)
[ 1.035695] ACPI: Power Resource [P1PR] (on)
[ 1.041033] ACPI: Power Resource [P2PR] (on)
[ 1.049568] ACPI: Power Resource [SAPR] (off)
[ 1.058565] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.065488] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 1.073348] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 1.084418] acpi PNP0A08:00: host bridge window expanded to [mem 0x40000000-0xdfffffff window]; [mem 0x40000000-0xdfffffff window] ignored
[ 1.098677] PCI host bridge to bus 0000:00
[ 1.103263] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 1.110176] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 1.117767] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 1.125357] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 1.132948] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 1.141317] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 1.149675] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 1.158043] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
[ 1.166401] pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
[ 1.174769] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.180906] pci 0000:00:00.0: [8086:2b80] type 00 class 0x060000
[ 1.187930] pci 0000:00:0b.0: [8086:2bdc] type 00 class 0x118000
[ 1.194684] pci 0000:00:0b.0: reg 0x10: [mem 0x50d1c000-0x50d1cfff 64bit]
[ 1.202538] pci 0000:00:0c.0: [8086:2be2] type 00 class 0x101000
[ 1.209285] pci 0000:00:0c.0: reg 0x10: [mem 0x50600000-0x507fffff]
[ 1.216323] pci 0000:00:0c.0: reg 0x18: [mem 0x50d44000-0x50d44fff]
[ 1.223416] pci 0000:00:0c.0: PME# supported from D0 D3hot
[ 1.229756] pci 0000:00:0d.0: [8086:2be9] type 00 class 0x028000
[ 1.236496] pci 0000:00:0d.0: reg 0x10: [mem 0x40000000-0x4fffffff]
[ 1.243516] pci 0000:00:0d.0: reg 0x14: [mem 0x50c00000-0x50cfffff]
[ 1.250791] pci 0000:00:0d.1: [8086:2be8] type 00 class 0x028000
[ 1.257530] pci 0000:00:0d.1: reg 0x10: [mem 0x50d18000-0x50d1bfff]
[ 1.264815] pci 0000:00:0e.0: [8086:2be6] type 00 class 0x048000
[ 1.271548] pci 0000:00:0e.0: reg 0x10: [mem 0x50b00000-0x50bfffff]
[ 1.278584] pci 0000:00:0e.0: reg 0x18: [mem 0x50d43000-0x50d43fff]
[ 1.285671] pci 0000:00:0e.0: PME# supported from D0 D3hot
[ 1.292018] pci 0000:00:14.0: [8086:2bb5] type 00 class 0x0c0330
[ 1.298768] pci 0000:00:14.0: reg 0x10: [mem 0x50d00000-0x50d0ffff 64bit]
[ 1.306454] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.313107] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.319544] pci 0000:00:16.0: [8086:2bb7] type 00 class 0x0c03fe
[ 1.326285] pci 0000:00:16.0: reg 0x10: [mem 0x50400000-0x505fffff]
[ 1.333385] pci 0000:00:16.0: PME# supported from D0 D3hot
[ 1.339742] pci 0000:00:1a.0: [8086:2b98] type 00 class 0x108000
[ 1.346488] pci 0000:00:1a.0: reg 0x10: [mem 0x50a00000-0x50afffff]
[ 1.353511] pci 0000:00:1a.0: reg 0x14: [mem 0x50900000-0x509fffff]
[ 1.360617] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 1.366966] pci 0000:00:1b.0: [8086:2be7] type 00 class 0x048000
[ 1.373712] pci 0000:00:1b.0: reg 0x10: [mem 0x50800000-0x508fffff]
[ 1.380744] pci 0000:00:1b.0: reg 0x18: [mem 0x50d2d000-0x50d2dfff]
[ 1.387833] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 1.394169] pci 0000:00:1c.0: [8086:2bc8] type 01 class 0x060400
[ 1.400993] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.408030] pci 0000:00:1c.1: [8086:2bca] type 01 class 0x060400
[ 1.414850] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.421897] pci 0000:00:1f.0: [8086:2b9c] type 00 class 0x060100
[ 1.428939] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 1.435708] pci 0000:00:1f.3: reg 0x10: [mem 0x50d1d000-0x50d1d01f]
[ 1.442821] pci 0000:00:1f.3: rnk [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.598874] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.609345] intelce2700_gpio INT33FF:00: Intel CE2700 GPIO INT33FF:00 probed as Platform driver
[ 1.620059] intelce2700_gpio INT33FF:01: Intel CE2700 GPIO INT33FF:01 probed as Platform driver
[ 1.630640] intelce2700_gpio INT33FF:02: Intel CE2700 GPIO INT33FF:02 probed as Platform driver
[ 1.641897] intelce2700_gpio INT33FF:03: Intel CE2700 GPIO INT33FF:03 probed as Platform driver
[ 1.652102] intelce2700_gpio INT33FF:04: Intel CE2700 GPIO INT33FF:04 probed as Platform driver
[ 1.662812] intelce2700_gpio INT33FF:05: Intel CE2700 GPIO INT33FF:05 probed as Platform driver
[ 1.673233] ACPI: Enabled 10 GPEs in block 00 to 3F
[ 1.690768] dw_dmac 80862B86:00: Missing DT data
[ 1.708328] dw_dmac 80862B86:00: DesignWare DMA Controller, 8 channels
[ 1.727681] dw_dmac 80862BC0:00: Missing DT data
[ 1.745233] dw_dmac 80862BC0:00: DesignWare DMA Controller, 8 channels
[ 1.752865] SCSI subsyste
[ 1.789566] ACPI: bus type USB registered
[ 1.794113] usbcore: registered new interface driver usbfs
[ 1.800273] usbcore: registered new interface driver hub
[ 1.806232] usbcore: registered new device driver usb
[ 1.811908] pps_core: LinuxPPS API ver. 1 registered
[ 1.817460] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.827682] PTP clock support registered
[ 1.832151] Registered efivars operations
[ 1.836649] AVM prom-env: Initializing urlader environment from EFI vars
[ 1.852309] AVM prom-env: getenv: HWRevision=233
[ 1.857476] AVM prom-env: getenv: HWSubRevision=8
[ 1.862738] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_led_power gpio_nr=285 param=11, force_logical=1
[ 1.874148] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_led_fon gpio_nr=286 param=11, force_logical=1
[ 1.885360] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_led_dect gpio_nr=287 param=11, force_logical=1
[ 1.896668] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_led_wlan gpio_nr=290 param=11, force_logical=1
[ 1.907979] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_led_info gpio_nr=289 param=11, force_logical=1
[ 1.919287] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_led_info_red gpio_nr=288 param=11, force_logical=1
[ 1.930985] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_button_dect gpio_nr=122 param=12, force_logical=1
[ 1.942583] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_button_wlan gpio_nr=113 param=12, force_logical=1
[ 1.954181] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_dect_rd gpio_nr=54 param=10, force_logical=0
[ 1.965303] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_dect_reset gpio_nr=295 param=10, force_logical=0
[ 1.976811] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_piglet_noemif_clk gpio_nr=291 param=11, force_logical=0
[ 1.989004] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_piglet_noemif_done gpio_nr=293 param=13, force_logical=0
[ 2.001289] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_piglet_noemif_prog gpio_nr=292 param=10, force_logical=0
[ 2.013583] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_piglet_noemif_data gpio_nr=296 param=11, force_logical=0
[ 2.025875] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_tdm_fsc gpio_nr=183 param=1, force_logical=0
[ 2.036984] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_tdm_dcl gpio_nr=180 param=1, force_logical=0
[ 2.048091] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_tdm_rx gpio_nr=188 param=1, force_logical=0
[ 2.059101] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_tdm_tx gpio_nr=185 param=257, force_logical=0
[ 2.070312] avm-hw-config/core: avm_initialize_hw_gpio: gpio_avm_usb30_pwr_en gpio_nr=172 param=10, force_logical=0
[ 2.082045] PCI: Using ACPI for IRQ routing
[ 2.086726] PCI: pci_cache_line_size set to 64 bytes
[ 2.092361] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 2.099080] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 2.105797] e820: reserve RAM buffer [mem 0x0ec00000-0x0fffffff]
[ 2.112513] e820: reserve RAM buffer [mem 0x3de74000-0x3fffffff]
[ 2.119230] e820: reserve RAM buffer [mem 0x3de77000-0x3fffffff]
[ 2.125937] e820: reserve RAM buffer [mem 0x3e29d000-0x3fffffff]
[ 2.132653] e820: reserve RAM buffer [mem 0x3e2a0000-0x3fffffff]
[ 2.139369] e820: reserve RAM buffer [mem 0x3ec00000-0x3fffffff]
[ 2.146361] Enabling Net IP interrupts except GBE reg ff
[ 2.159426] Initializing Intel(R) NET SUBSYSTEM driver
[ 2.165195] docsis_chan_cfg = 00000000
[ 2.169744] BIOS enabled xgmiis = 0000001F
[ 2.174364] HW Mutex: mem_iobase = 0x40190000, mem_iosize = 0x10000
[ 2.181381] HW Mutex: CFG register 1
[ 2.185368] Initizlizing Intel(R) HW MUTEX driver
[ 2.190628] HW_M: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 2.513170] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 2.520965] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.528931] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.536592] pnp: PnP ACPI: found 5 devices
[ 2.547404] Reboot Status is: Short-PowerOff-Reboot(SHORTPOWERCUT) SUM(67) - SHORTPOWERCUT(67)
[ 2.557051] AVM prom-env: getenv: HWRevision=233
[ 2.562237] AVM prom-env: getenv: HWSubRevision=8
[ 2.567514] AVM prom-env: getenv: bootloaderVersion=1.3614
[ 2.611296] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 2.621265] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.626838] pci 0000:00:1c.0: bridge window [mem 0x50200000-0x503fffff]
[ 2.634450] pci dow]
[ 2.660783] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 2.667704] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 2.674624] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 2.682313] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 2.690003] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 2.697798] pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window]
[ 2.705593] pci_bus 0000:00: resource 12 [mem 0x40000000-0xdfffffff window]
[ 2.713387] pci_bus 0000:01: resource 1 [mem 0x50200000-0x503fffff]
[ 2.720405] pci_bus 0000:02: resource 1 [mem 0x50000000-0x501fffff]
[ 2.727618] NET: Registered protocol family 2
[ 2.732563] IP idents hash table entries: 16384 (order: 5, 131072 bytes)
[ 2.758454] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 2.766396] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.773643] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.780782] UDP hash tabl
[ 2.873717] Puma7 PMIC VCC0_VID_BUCK regulator 1 initialised
[ 2.908472] Puma7 PMIC V3P3_EXT_DCDC regulator 2 initialised
[ 2.943220] Puma7 PMIC VNN_VID_BUCK regulator 3 initialised
[ 2.977878] Puma7 PMIC V1P15_BUCK regulator 4 initialised
[ 3.012350] Puma7 PMIC V1P05A_BUCK regulator 5 initialised
[ 3.046909] Puma7 PMIC VDDQ_BUCK regulator 6 initialised
[ 3.081280] Puma7 PMIC V1P8A_BUCK regulator 7 initialised
[ 3.115762] Puma7 PMIC PUMA7_PMIC regulator 8 initialised
[ 3.290476] [puma7_pmic_regulator_probe]: pmic regulator config succeed.
[ 3.397204] Scanning for low memory corruption every 60 seconds
[ 3.404765] audit: initializing netlink subsys (enabled)
[ 3.410747] audit: type=2000 audit(2.098:1): initialized
[ 3.417187] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 3.424625] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.431218] ANTFS Module: Version 2.53
[ 3.435533] fuse init (API version 7.26)
[ 3.443499] Key type asymmetric registered
[ 3.448102] Asymmetric key parser 'x509' registered
[ 3.453609] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 3.461901] io scheduler noop registered
[ 3.466318] io scheduler cfq registered (default)
[ 3.472445] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.478712] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.486137] intel_idle: MWAIT substates: 0x33000020
[ 3.491606] intel_idle: v0.4.1 model 0x6E
[ 3.496331] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.503059] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.512419] ACPI: Power Button [PWRB]
[ 3.516633] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 3.525990] ACPI: Sleep Button [SLPB]
[ 3.533661] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.561240] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.584482] 80862B8A:00: ttyS1 at MMIO 0x50d27000 (irq = 39, base_baud = 2764800) is a 16550A
[ 3.607459] 80862B8A:01: ttyS2 at MMIO 0x50d25000 (irq = 40, base_baud = 2764800) is a 16550A
[ 3.617912] [avm] configured: watchdog event debug [ 3.623186]
[ 3.624941] Register push button event to receive the set_factory_kernel event
[ 3.649459] Checkpoint Proc init
[ 3.653109] AVM Simple Profiling enabled Version 3.0
[ 3.658696] NMI profiling enabled, takes one hw-pmu counter.
[ 3.665088] NMI profiling enabled, takes one hw-pmu counter.
[ 3.671425] AVM_WATCHDOG: Watchdog Driver for AR7 Hardware (Version 1.0)
[ 3.678981] ar7wdt_hw_shim: ar7wdt_hw_init: No watchdog device available (yet)
[ 3.687368] avm_net_trace: Up and running.
[ 3.714538] brd: module loaded
[ 3.721028] loop: module loaded
[ 3.725795] mei_txe 0000:00:1a.0: TXE8086: acpi __CRS resource not found
[ 3.735684] intel-spi intel-spi: mx25u1635f (2048 Kbytes)
[ 3.741737] Creating 4 MTD partitions on "intel-spi":
[ 3.747397] 0x000000000000-0x000000001000 : "Descriptor"
[ 3.754572] 0x000000124000-0x000000200000 : "BIOS"
[ 3.760744] 0x000000001000-0x0000000d9000 : "ME"
[ 3.766906] 0x0000000d9000-0x000000124000 : "Platform Data"
[ 3.779448] mtd mtd3: Found valid PDR
[ 3.783557] mtd mtd3: Found valid OEM data
[ 3.796687] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 3.804929] libphy: Fixed MDIO Bus: probed
[ 3.812425] Initializing SFP driver
[ 3.816376] tun: Universal TUN/TAP device driver, 1.6
[ 3.822041] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 3.829138] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 3.835966] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.842149] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.850037] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.856502] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.863037] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.869699] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 3.877494] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.883762] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 3.892528] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.899173] [LP-DP-DEBUG][lpal_dp_init:438] litepath AL Wrapper module loaded
[ 3.907579] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.914469] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.922582] i2c /dev entries driver
[ 3.927490] i801_smbus 0000:00:1f.3: can't derive routing for PCI INT B
[ 3.934905] i801_smbus 0000:00:1f.3: PCI INT B: not connected
[ 3.941399] i801_smbus 0000:00:1f.3: SMBus using polling
[ 3.948595] Initializing Puma thermal driver[ 3.953230] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.959534] iTCO_wdt: Found a Puma7 SoC TCO device (Version=3, TCOBASE=0x0460)
[ 3.967631] iTCO_wdt: initialized. heartbeat=180 sec (nowayout=0)
[ 3.974470] watchdog: AVM driver enabled, not creating device file for iTCO_wdt
[ 3.982650] ar7wdt_hw_shim: Device #0 attached (iTCO_wdt)
[ 3.988693] ar7wdt_hw_shim: Starting watchdog
[ 3.993591] [avm_nmi_timer_start] Starting AVM NMI timer on cpus #0. Period 10 seconds, 143181800 ticks
[ 4.004253] sdhci: Secure Digital Host Controller Interface driver
[ 4.011174] sdhci: Copyright(c) Pierre Ossman
[ 4.019822] mmc0: SDHCI controller on ACPI [80862B94:00] using ADMA
[ 4.035131] mmc1: SDHCI controller on ACPI [80862B95:00] using ADMA
[ 4.049190] mmc2: SDHCI controller on ACPI [80862B96:00] using ADMA
[ 4.056603] EFI Variables Facility v0.08 2004-May-17
[ 4.088492] PUMA ACPI platform driver loaded!
[ 4.093441] Initializing Cru Control module
[ 4.097317] mmc1: req failed (CMD5): -110, retrying...
[ 4.099717] mmc1: req failed (CMD5): -110, retrying...
[ 4.104105] mmc1: req failed (CMD5): -110, retrying...
[ 4.115750] AVM PA 2.138.1.16-release_move21-move21 for Linux Linux version 4.9.279 ([email protected]) (gcc version 8.4.0 (Buildroot 2020.02.1-g53bf1c36) ) #1 SMP PREEMPT 2023-06-06
[ 4.115750] (late init)
[ 4.137583] Mirror/redirect action on
[ 4.141695] u32 classifier
[ 4.144730] Performance counters on
[ 4.146294] mmc0: req failed (CMD5): -110, retrying...
[ 4.148674] mmc0: req failed (CMD5): -110, retrying...
[ 4.151048] mmc0: req failed (CMD5): -110, retrying...
[ 4.166281] input device check on
[ 4.170380] Actions configured
[ 4.174267] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 4.180639] gre: GRE over IPv4 demultiplexor driver
[ 4.186105] ip_gre: GRE over IPv4 tunneling driver
[ 4.191884] Initializing XFRM netlink socket
[ 4.196671] IPsec XFRM device driver
[ 4.198525] mmc1: req failed (CMD5): -110, retrying...
[ 4.200997] mmc1: req failed (CMD5): -110, retrying...
[ 4.203489] mmc1: req failed (CMD5): -110, retrying...
[ 4.219638] NET: Registered protocol family 10
[ 4.225360] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.232522] ip6_gre: GRE over IPv6 tunneling driver
[ 4.235424] mmc0: new HS200 MMC card at address 0001
[ 4.236710] mmcblk0: mmc0:0001 004GA0 3.69 GiB
[ 4.237863] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB
[ 4.239074] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB
[ 4.240264] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB
[ 4.242298] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
[ 4.277277] NET: Registered protocol family 17
[ 4.282269] NET: Registered protocol family 15
[ 4.287258] Bridge broadcast ratelimiter registered
[ 4.289890] mmc1: req failed (CMD5): -110, retrying...
[ 4.292587] mmc1: req failed (CMD5): -110, retrying...
[ 4.295262] mmc1: req failed (CMD5): -110, retrying...
[ 4.309971] l2tp_core: L2TP core driver, V2.0
[ 4.314855] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 4.321102] l2tp_netlink: L2TP netlink interface
[ 4.326291] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 4.332910] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 4.340126] 8021q: 802.1Q VLAN Support v1.8
[ 4.344818] lib80211: common routines for IEEE802.11 drivers
[ 4.351164] lib80211_crypt: registered algorithm 'NULL'
[ 4.357012] lib80211_crypt: registered algorithm 'WEP'
[ 4.362764] lib80211_crypt: registered algorithm 'CCMP'
[ 4.368614] lib80211_crypt: registered algorithm 'TKIP'
[ 4.374488] Key type dns_resolver registered
[ 4.379926] microcode: sig=0x606e1, pf=0x1, revision=0x107
[ 4.386213] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
[ 4.396064] Using IPI No-Shortcut mode
[ 4.403523] Btrfs loaded, crc32c=crc32c-intel
[ 4.409010] AVM prom-env: getenv: kernel_args=(null)
[ 4.414594] tsc: Refined TSC clocksource calibration: 1999.935 MHz
[ 4.414603] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a7e20eeeb, max_idle_ns: 881590574456 ns
[ 4.433462] mtd mtd4: tffs partition found
[ 4.438074] [TFFS3_Init] Called.
[ 4.441694] [TFFS3_Register_SERVER] Called
[ 4.446433] [TFFS3_EFI_SYNC_Configure] Eva TFFS marker found, EFI sync not necessary.
[ 4.455207] [TFFS3_CACHE_Configure] Setting up caching for backend nand
[ 4.462608] [TFFS3-CACHE] Caching module for TFFS 3.x
[ 4.468265] [TFFS3-NAND-noob][TFFS3_NAND_Setup] NAND without OOB storage backend for TFFS 3.x on mtd4
[ 4.486272] random: fast init done
[ 4.819213] [TFFS3-NAND-noob][TFFS3_NAND_Setup] Initialisation successful, 64/64/64 NAND blocks active, fill rate 21%; Using TFFS3.1
[ 4.832554] [TFFS3-REMOTE] Remote storage server for TFFS 3.x
[ 4.839078] [TFFS_Cache] Allocate segement buffer cache (size=4060)
[ 4.839111] [TFFS3_SERVER_thread] waiting for remote node connection to be established
[ 4.855055] tffs/panic: have_new_logentry: Error reading crashenv: -2
[ 4.862274] tffs/panic: have_new_logentry: Error reading crashenv: -2
[ 4.869613] TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 3.0)
[ 4.878010] Adam2 environment variables API installed.
[ 4.883916] [TFFS3_Register_Panic_CB] registering panic callback for mtd block2mtd: /dev/mmcblk0p15
[ 4.894050] block2mtd: mtd4: [/dev/mmcblk0p15] erase_size = 128KiB [131072]
[ 4.901866] console [netcon0] enabled
[ 4.905971] netconsole: network logging started
[ 4.911889] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.918632] EDD information not available.
[ 4.928325] VFS: Mounted root (squashfs filesystem) readonly on device 179:9.
[ 4.938129] devtmpfs: mounted
[ 4.941721] Freeing unused kernel memory: 552K
[ 4.946872] Write protecting the kernel text: 8152k
[ 4.952496] Write protecting the kernel read-only data: 2368k
starting pid 146, tty '': '/etc/boot.d/1'
[ 5.367742] hui: loading out-of-tree module taints kernel.
[ 5.374894] [hui] Initialize hardware user interface
[ 5.424248] clocksource: Switched to clocksource tsc
[ 10.496281] [1]system-load 35% loadavg 0.16 0.3 0.1 - pgstat: sum=375699 free=173509 slab=1923 alloc=829/s fault=137/s (sleep 1)
[ 248.078788] INFO: task modprobe:164 blocked for more than 120 seconds.
[ 248.086268] Tainted: G O 4.9.279 #1
[ 248.092094] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 248.100863] modprobe D 0 164 163 0x00000080
[ 248.107025] 00000086 8424b580 b48cd000 bdd2c280 b524dcfc 83feeb28 b524dd20 83893f45
[ 248.115782] 844e1460 00000000 b5199600 00000001 b524dd90 00000000 7fffffff b524dd04
[ 248.124518] 83feee9e b524dd5c 83ff20e5 8386f02f 00000292 00000028 00000006 00000006
[ 248.133274] Call Trace:
[ 248.136020] ? __schedule+0x128/0x470
[ 248.140134] ? console_unlock+0x3e5/0x650
[ 248.144623] schedule+0x2e/0x80
[ 248.148139] schedule_timeout+0x1c5/0x2f0
[ 248.152635] ? __might_sleep+0x2f/0x90
[ 248.156831] ? __might_sleep+0x2f/0x90
[ 248.161025] ? kmem_cache_alloc+0x9b/0x160
[ 248.165617] wait_for_completion+0x91/0xf0
[ 248.170203] ? wake_up_q+0x60/0x60
[ 248.174027] ? _event_node_established_cb+0xa/0xa [hui]
[ 248.179893] hui_init+0x53/0xd2 [hui]
[ 248.183994] do_one_initcall+0x3c/0x100
[ 248.188287] ? kernfs_add_one+0x100/0x170
[ 248.192782] ? __might_sleep+0x2f/0x90
[ 248.196978] ? kmem_cache_alloc+0x9b/0x160
[ 248.201562] do_init_module+0x4a/0x200
[ 248.205764] load_module+0x12dc/0x1700
[ 248.209967] ? kernel_read_file+0x21e/0x260
[ 248.214649] SyS_finit_module+0x95/0x100
[ 248.219048] ? syscall_trace_enter+0x1cc/0x200
[ 248.224021] do_int80_syscall_32+0x5c/0xd0
[ 248.228605] entry_INT80_32+0x31/0x31Anmerkung: der CALL TRACE: Abschnitt wiederholt sich nach einigen Minuten
Ich kann leider nicht erkennen, ob eine/r der VorbesitzerInnen Debrandingversuche unternommen hat inkl. Briefbeschwerer oder ein Hardwaredefekt vorliegt. Falls einer der Experten mir ein paar Tipps geben könnte, wie ich in der EFI-shell etwas Testen oder Verändern kann, würde ich mich sehr freuen.
