Fritz 3131 anpassen?

soni-c · 11 Okt 2011

Hallo!
Habe eine Frage:
Habe die 3131 vor der 7390 hängen, meine Frage da ich die 3131 nur als Router Benutze alles andere zu entfernen (usb, tel, wlan, etc.)?
Eine Frage habe ich noch: ist es evt. möglich die DSL Treiber bei der 3131 zu ersetzen von einer anderen Box? (z.b. 7141, 7170) bzw. auf einen neueren stand als 13.06.08

Danke im Voraus
mfg

informerex · 11 Okt 2011

vielleicht ist es sinnvoller die Box zu veräußern und dir eine entsprechende/gebrauchte Hardware, die deinen Anforderung besser gerecht wird, zu kaufen.
weil bereits hier hattest du ua. ja bereits nach eine Mod. angefragt.

RalfFriedl · 11 Okt 2011

Vermutlich kann man die genannten Funktionen entfernen, einge zumindest wohl auch mit Freetz.
Aber was würde es Dir bringen, diese Funktionen zu entfernen?

Ob man die DSL-Treiber austauschen kann, ist fraglich. Du könntest es ausprobieren, wenn Dir danach ist. Es kommt insbesondere darauf an, wie ähnlich die Hardware der Box ist, von der Du den Treiber nutzen willst.

soni-c · 11 Okt 2011

RalfFriedl schrieb:
...

Das meine ich ja! Was meint Ihr welche Box mit neuerem DSL Treiber ist der 3131 am ähnlichsten?

mfg

olistudent · 11 Okt 2011

Derzeit ist mit Freetz keine Alien Variante für die 3131 baubar. Die 7170 wäre evtl. möglich. Jedoch kannst du für den Aufwand gleich eine ganze Kiste voll mit 3131 kaufen...

Gruß
Oliver

imagomundi · 12 Okt 2011

Die 3131 ist noch eine 4mb-Box - also aus den Zeiten der 5050 und 7050. Danach gab es nur noch mindestens 8 mb (z.B. die 7170) und später dann 16 (ab 7270). Es dürfte deshalb kaum möglich sein, die 3131 mit einer FW mit neueren Features zu flashen, die ja auch mehr Speicher benötigen.

Ein Austausch (=Antwort auf PN) nur des DSL-Treibers gegen den aus einer neueren Box mit geeigneter FW dürfte sich zwar mit viel Aufwand möglicherweise realisieren lassen - nur führt das nicht automatisch dazu, daß Dir dann auch all die Features aus der FW zur Verfügung stehen, aus der der DSL-Treiber extrahiert wurde. Die FW selbst wird dadurch ja nicht verändert oder ausgetauscht.

Aus Neugier: Warum hängst Du eine Uralt-Box VOR eine 7390 und lässt nicht gleich die 7390 den DSL-Connect übernehmen?

informerex · 12 Okt 2011

imagomundi schrieb:
Aus Neugier: Warum hängst Du eine Uralt-Box VOR eine 7390 und lässt nicht gleich die 7390 den DSL-Connect übernehmen?

klick - klack

imagomundi · 12 Okt 2011

Na gut - klick-klack ist ne Erklärung - ich seh das ein wenig lockerer: Nachdem ich in meinem südamerikanischen Ländchen mich mit HÖCHSTENS 2 mb zufrieden geben muß, die vermutlich aber auch nur zwischen 3 und 4 Uhr in der Nacht von Sonntag auf Montag tatsächlich erreicht werden (der Normalfall sind 700 bis 1200 k), würde ich tagelang Pirouetten drehen, wenn ich auch "nur" 11.500 k erleben dürfte. Weitere 800 k würden ein solches Erlebnis nur noch unmerklich steigern können.

soni-c · 12 Okt 2011

imagomundi schrieb:
Weitere 800 k würden ein solches Erlebnis nur noch unmerklich steigern können.

Es geht auch um die Fehler die die FB anzeigt... Desweiteren brauche ich keine Funktionen der jeweiligen box wollte lediglich nur einen neueren DSL Treiber wegen der Leitung...

Danke Trotzdem ich versuch es mal ... :/

olistudent · 12 Okt 2011

Mir fällt da nur die 3170 als Spender ein. Wobei deren DSL-Treiber auch nicht viel neuer ist. Du müsstest die Dateien microvoip-dsl.bin und ubik.ko aus der 3170 rauskopieren und per fwmod_custom in dein 3131 Image kopieren.

Gruß
Oliver

imagomundi · 13 Okt 2011

olistudent schrieb:
Mir fällt da nur die 3170 als Spender ein. Wobei deren DSL-Treiber auch nicht viel neuer ist.

Zwischen der Veröffentlichung der 50.04.57 (3131) und der 49.04.58 (3170) liegen knappe 2 Monate - die gesamte FW der 3170 ist mit genau 4000 kb (Angabe AVM-ftp) gerade mal 30 kb grösser als die der 3131. Da scheint mir ein Treiber-Tausch wenig sinnvoll. Sinnvoller wäre m.E. Olivers erster Vorschlag der 7170, die ebenfalls einen Treiber "microvoip-dsl.bin" haben - allerdings noch bis vor kurzem weiter entwickelt worden sind bis zur FW 29.04.87. Ist nur die Frage, ob eine Box ohne Telefonie-Funktion den Treiber aus einer Telefonie-Box annimmt, weil in dem Treiber vermutlich auch Steuerelemente für die Telefonie vorhanden sind.

@ Oliver: finde in 50.04.57, 49.04.58 und 29.04.87 nur eine ubik2.ko (lib>kernel>treiber>char). In der 3131 und der 3170-FW sind diese Dateien gleich groß, sind deshalb vermutlich auch die gleichen. In der 7170-FW 29.04.87 ist ubik2.ko (selber Pfad) geringfügig größer als in den beiden anderen. Gibt es eine grundsätzliche Abhängigkeit zwischen ubik2.ko und microvoip-dsl.bin und MUß deshalb zwangsläufig bei einem Versuch mit dem 7170-Treiber auch die ubik2.ko aus der selben 7170-FW zusammen mit dem DSL-Treiber in die 3131 übernommen werden?

olistudent · 13 Okt 2011

Laut hippie2000 (wehavemorefun.de) besteht zwischen der ko und dem bin eine Abhängigkeit. Die geht sogar so weit, dass man die Dateien von den FON Modellen nicht auf den nicht-FON Modellen nutzen kann. Deshalb würde die 7170 als Spender rausfallen.

Gruß
Oliver

imagomundi · 13 Okt 2011

olistudent schrieb:
Die geht sogar so weit, dass man die Dateien von den FON Modellen nicht auf den nicht-FON Modellen nutzen kann. Deshalb würde die 7170 als Spender rausfallen.

Und wenn man auch die ubik2.ko aus der 7170 zusammen mit dem microvoip-dsl.bin (Treiber) in eine 3131-FW einbaut/beide Dateien austauscht?

olistudent · 13 Okt 2011

So wie ich hippie verstanden habe geht das nicht. Wenn dich Details interessieren, dann schau auf #fritzbox vorbei.

soni-c · 14 Okt 2011

Mahlzeit!

Ich habe es Vollbracht!!!! Meine 3131 läuft mit der DSL Version siehe Bild

Müsste die Aktuelle der 7170 sein!!
Habe es gleich mit dem Ersten Versuch geschafft!!!! mit freetz 1.2 und own.files frage mich selbst wie ich das geschafft habe

Danke für alle! Ich teste Weiter

P.S. Giebt es eine Möglichkeit bei der 3131 die Erweiterten DSL einstellungen wie bei den Labor Versionen hinzuzufügen?
(http://www.ip-phone-forum.de/showthread.php?t=210571) Habe das versucht klappt aber nicht...

config:

Code:

#
# Automatically generated make config: don't edit
#
FREETZ_HAVE_DOT_CONFIG=y

#
# General --------------------------------
#
FREETZ_AVM_VERSION_04_57=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5124 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7112 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
# FREETZ_TYPE_FON_WLAN_7170 is not set
# FREETZ_TYPE_FON_WLAN_7240 is not set
# FREETZ_TYPE_FON_WLAN_7270_V1 is not set
# FREETZ_TYPE_FON_WLAN_7270_V2 is not set
# FREETZ_TYPE_FON_WLAN_7270_V3 is not set
# FREETZ_TYPE_FON_WLAN_7320 is not set
# FREETZ_TYPE_FON_WLAN_7340 is not set
# FREETZ_TYPE_FON_WLAN_7390 is not set
# FREETZ_TYPE_FON_WLAN_7570 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
FREETZ_TYPE_WLAN_3131=y
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_WLAN_3270_V3 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_CUSTOM is not set
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_A_CH is not set
# FREETZ_TYPE_LANG_EN is not set
FREETZ_TYPE_LANGUAGE="de"
FREETZ_AVM_VERSION_STRING="04.57"
FREETZ_TYPE_PREFIX="3131"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_SHOW_ADVANCED=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
# FREETZ_REPLACE_KERNEL is not set
# FREETZ_TARGET_IPV6_SUPPORT is not set
FREETZ_TARGET_REF_4MB=y
FREETZ_TARGET_REF="4mb"
FREETZ_KERNEL_REF_4MB=y
FREETZ_KERNEL_REF="4mb"
FREETZ_KERNEL_MTD_SIZE=59
# FREETZ_HAS_AVM_IPV6 is not set
# FREETZ_HAS_AVM_INETD is not set
# FREETZ_HAS_CHRONYD is not set
# FREETZ_HAS_DECT is not set
FREETZ_HAS_LIBSSL=y
# FREETZ_HAS_LSOF is not set
# FREETZ_HAS_NAS is not set
# FREETZ_HAS_PHONE is not set
# FREETZ_HAS_STRACE is not set
# FREETZ_HAS_TAM is not set
# FREETZ_HAS_UDEV is not set
FREETZ_HAS_USB_CLIENT=y
FREETZ_HAS_USB_HOST=y
FREETZ_HAS_USB_HOST_AVM=y
# FREETZ_HAS_UTIL_LINUX is not set
FREETZ_HAS_WLAN=y

#
# Mod ------------------------------------
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"

#
# Patches
#

#
# Web menu patches ------------------------
#
FREETZ_PATCH_SIGNED=y

#
# USB mounting ----------------------------
#
# FREETZ_PATCH_FREETZMOUNT is not set
# FREETZ_PATCH_MAXDEVCOUNT is not set

#
# Removings -------------------------------
#
FREETZ_REMOVE_ASSISTANT=y
FREETZ_REMOVE_AURA_USB=y
FREETZ_REMOVE_USB_MODULE=y

#
# Remove brandings
#
# FREETZ_REMOVE_BRANDING_avm is not set
# FREETZ_REMOVE_BRANDING_versatel is not set
# FREETZ_REMOVE_DSLD is not set
FREETZ_REMOVE_FTPD=y
FREETZ_REMOVE_HELP=y
FREETZ_REMOVE_MEDIASRV=y
FREETZ_REMOVE_PRINTSERV=y
FREETZ_REMOVE_PRINTSERV_MODULE=y
FREETZ_REMOVE_RUNCLOCK=y
FREETZ_REMOVE_SMBD=y
FREETZ_REMOVE_SUPPORT=y
FREETZ_REMOVE_UPNP=y
# FREETZ_REMOVE_UPNP_LIBS is not set
FREETZ_REMOVE_USERMAN=y
# FREETZ_REMOVE_WLAN is not set

#
# Adds -----------------------------------
#

#
# Additional patches ---------------------
#
# FREETZ_ENFORCE_URLADER_SETTINGS is not set

#
# Other stuff -----------------------------
#
# FREETZ_PATCH_GETCONS is not set

#
# Package selection
#

#
# Debug helpers
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set

#
# Standard packages
#
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
# FREETZ_PACKAGE_BRIDGE_UTILS is not set
# FREETZ_PACKAGE_CALLMONITOR is not set
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
# FREETZ_PACKAGE_CPMACCFG is not set
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
# FREETZ_PACKAGE_DNS2TCP is not set
# FREETZ_PACKAGE_DNSMASQ is not set
# FREETZ_PACKAGE_DROPBEAR is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FORTUNE is not set
# FREETZ_PACKAGE_FUSE is not set
FREETZ_PACKAGE_HASERL=y
# FREETZ_PACKAGE_HASERL_WITH_LUA is not set
# FREETZ_PACKAGE_INETD is not set
# FREETZ_PACKAGE_KNOCK is not set
# FREETZ_PACKAGE_MC is not set
# FREETZ_PACKAGE_MINI_FO is not set
# FREETZ_PACKAGE_MTR is not set
# FREETZ_PACKAGE_NANO is not set
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NC6 is not set
# FREETZ_PACKAGE_NETSNMP is not set
# FREETZ_PACKAGE_NFS_UTILS is not set
# FREETZ_PACKAGE_NTFS is not set
# FREETZ_PACKAGE_OPENNTPD is not set
# FREETZ_PACKAGE_OPENVPN is not set
# FREETZ_PACKAGE_PHP is not set
# FREETZ_PACKAGE_PINGTUNNEL is not set
# FREETZ_PACKAGE_PORTMAP is not set
# FREETZ_PACKAGE_PPPD_CHAT is not set
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_RCAPID is not set
# FREETZ_PACKAGE_SAMBA is not set
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TINYPROXY is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_TRANSMISSION is not set
# FREETZ_PACKAGE_VNSTAT is not set
# FREETZ_PACKAGE_VPNC is not set
# FREETZ_PACKAGE_VSFTPD is not set
# FREETZ_PACKAGE_XMAIL is not set

#
# Testing
#
# FREETZ_PACKAGE_APACHE is not set
# FREETZ_PACKAGE_AUTOFS is not set
# FREETZ_PACKAGE_BASH is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIND is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BITTWIST is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_CLASSPATH is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DIGITEMP is not set
# FREETZ_PACKAGE_DOSFSTOOLS is not set
# FREETZ_PACKAGE_DTACH is not set
# FREETZ_PACKAGE_E2FSPROGS is not set
# FREETZ_PACKAGE_EMPTY is not set
# FREETZ_PACKAGE_FFMPEG is not set
# FREETZ_PACKAGE_FSTYP is not set
# FREETZ_PACKAGE_GIT is not set
# FREETZ_PACKAGE_GNU_MAKE is not set
# FREETZ_PACKAGE_GNUTLS is not set
# FREETZ_PACKAGE_GOCR is not set
# FREETZ_PACKAGE_HD_IDLE is not set
# FREETZ_PACKAGE_HOL is not set
# FREETZ_PACKAGE_HTOP is not set
# FREETZ_PACKAGE_HTPDATE is not set
# FREETZ_PACKAGE_HTTPRY is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
# FREETZ_PACKAGE_IFSTAT is not set
# FREETZ_PACKAGE_IFTOP is not set
# FREETZ_PACKAGE_IGMPPROXY is not set
# FREETZ_PACKAGE_INADYN_MT is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IPTRAF is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LFTP is not set
# FREETZ_PACKAGE_LIGHTTPD is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
# FREETZ_PACKAGE_MEDIATOMB is not set
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MINI_SNMPD is not set
# FREETZ_PACKAGE_MINICOM is not set
# FREETZ_PACKAGE_MINIDLNA is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NCFTP is not set
# FREETZ_PACKAGE_NETPBM is not set
# FREETZ_PACKAGE_NOIP is not set
# FREETZ_PACKAGE_NDAS is not set
# FREETZ_PACKAGE_NGIRCD is not set
# FREETZ_PACKAGE_NMAP is not set
# FREETZ_PACKAGE_OBEXFTP is not set
# FREETZ_PACKAGE_OIDENTD is not set
# FREETZ_PACKAGE_OPENCONNECT is not set
# FREETZ_PACKAGE_OPENDD is not set

#
# OpenSSH
#
# FREETZ_PACKAGE_OPENSSH_SSHD is not set
# FREETZ_PACKAGE_OPENSSH_CLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SCP is not set
# FREETZ_PACKAGE_OPENSSH_CLIENTUTILS is not set
# FREETZ_PACKAGE_OPENSSH_KEYUTILS is not set
# FREETZ_PACKAGE_OPENSSH_SFTPCLIENT is not set
# FREETZ_PACKAGE_OPENSSH_SFTP is not set
# FREETZ_PACKAGE_OWFS is not set
# FREETZ_PACKAGE_POLIPO is not set
# FREETZ_PACKAGE_QUAGGA is not set
# FREETZ_PACKAGE_RIPMIME is not set
# FREETZ_PACKAGE_RRDTOOL is not set
# FREETZ_PACKAGE_RSYNC is not set
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SER2NET is not set
# FREETZ_PACKAGE_SIPROXD is not set
# FREETZ_PACKAGE_SLANG is not set
# FREETZ_PACKAGE_SLURM is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SPAWN_FCGI is not set
# FREETZ_PACKAGE_SQLITE is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_SSHFS_FUSE is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_SUBVERSION is not set
# FREETZ_PACKAGE_SYNCE_DCCM is not set
# FREETZ_PACKAGE_SYNCE_SERIAL is not set
# FREETZ_PACKAGE_TCP_WRAPPERS is not set
# FREETZ_PACKAGE_TCPPROXY is not set
# FREETZ_PACKAGE_TREE is not set
# FREETZ_PACKAGE_TRICKLE is not set
# FREETZ_PACKAGE_TMUX is not set
# FREETZ_PACKAGE_UDPXY is not set
# FREETZ_PACKAGE_UMURMUR is not set
# FREETZ_PACKAGE_UNRAR is not set
# FREETZ_PACKAGE_USBIP is not set
# FREETZ_PACKAGE_USBROOT is not set
# FREETZ_PACKAGE_UTIL_LINUX_NG is not set
# FREETZ_PACKAGE_VIM is not set
# FREETZ_PACKAGE_VTUN is not set
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
# FREETZ_PACKAGE_XSLTPROC is not set

#
# Web interfaces
#
# FREETZ_PACKAGE_AUTHORIZED_KEYS is not set
# FREETZ_PACKAGE_AVM_FIREWALL is not set
# FREETZ_PACKAGE_CPMACCFG_CGI is not set
# FREETZ_PACKAGE_DNSD_CGI is not set
# FREETZ_PACKAGE_DOWNLOADER is not set
# FREETZ_PACKAGE_NFSD_CGI is not set
# FREETZ_PACKAGE_ONLINECHANGED_CGI is not set
# FREETZ_PACKAGE_PHPXMAIL is not set
# FREETZ_PACKAGE_PPP_CGI is not set
# FREETZ_PACKAGE_RRDSTATS is not set
# FREETZ_PACKAGE_SPINDOWN_CGI is not set
# FREETZ_PACKAGE_SYSLOGD_CGI is not set
# FREETZ_PACKAGE_TRANSMISSION_CGI is not set
# FREETZ_PACKAGE_VIRTUALIP_CGI is not set
# FREETZ_PACKAGE_VNSTAT_CGI is not set
# FREETZ_PACKAGE_WOL_CGI is not set
# FREETZ_SHOW_UNSTABLE_PACKAGES is not set
FREETZ_PACKAGE_MOD=y
# FREETZ_PACKAGE_MOD_ETCSERVICES is not set
FREETZ_PACKAGE_MODCGI=y

#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_KERNEL_SITE="@AVM/develper/opensrc"
FREETZ_DL_KERNEL_SOURCE="fritzbox-source-files.04.57.tar.gz"
FREETZ_DL_KERNEL_SOURCE_MD5="702f4adf12638bfa34a6b10c0ede4b55"
FREETZ_DL_SITE="@AVM/fritz.box/fritzbox.wlan_3131/firmware/deutsch"
FREETZ_DL_SOURCE="fritz.box_wlan_3131.50.04.57.image"
FREETZ_DL_SOURCE_MD5="a34a8d4f7af511d5dd6fff5f3c4e8276"

#
# Build system options
#
FREETZ_VERBOSITY_LEVEL=0
FREETZ_JLEVEL=2
FREETZ_CHECK_CHANGED=y
# FREETZ_BACKUP_CONFIG_CACHE is not set
FREETZ_DL_SITE_USER=""

#
# Freetz customisation
#
# FREETZ_OPTIONS_ETCSERVICES is not set
FREETZ_SECURITY_LEVEL=1
FREETZ_STYLE_COLORED=y
# FREETZ_STYLE_GREY is not set
FREETZ_STYLE="colored"
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_ATOMPHIL is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_HANSOLO is not set
FREETZ_FAVICON_STRING="none"
FREETZ_TAGGING_NONE=y
# FREETZ_TAGGING_CUMA is not set
FREETZ_TAGGING_STRING="none"

#
# Additional image/box information
#
# FREETZ_SUBVERSION_STRING is not set
FREETZ_USER_DEFINED_COMMENT=""
# FREETZ_CUSTOM_IMAGE_NAME is not set
# FREETZ_REMOVE_BOX_INFO is not set
# FREETZ_REMOVE_FREETZ_INFO is not set
# FREETZ_REMOVE_DOT_CONFIG is not set
# FREETZ_CREATE_SEPARATE_OPTIONS_CFG is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_262144 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_524288 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_1048576 is not set

#
# Kernel modules
#

#
# block
#

#
# ndas
#
# FREETZ_MODULE_ndas_block is not set
# FREETZ_MODULE_ndas_core is not set
# FREETZ_MODULE_ndas_sal is not set

#
# crypto
#
# FREETZ_MODULE_aes is not set
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_sha1 is not set
# FREETZ_MODULE_sha256 is not set

#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_ipaq is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_hci_usb is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set
# FREETZ_MODULE_option is not set

#
# fs
#
# FREETZ_MODULE_autofs4 is not set
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
# FREETZ_MODULE_ext2 is not set
# FREETZ_MODULE_ext3 is not set
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_hfs is not set
# FREETZ_MODULE_hfsplus is not set
# FREETZ_MODULE_fuse is not set
# FREETZ_MODULE_iso9660 is not set
# FREETZ_MODULE_jbd is not set
# FREETZ_MODULE_lockd is not set
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set
# FREETZ_MODULE_nfsd is not set
# FREETZ_MODULE_exportfs is not set
# FREETZ_MODULE_nfs is not set
# FREETZ_MODULE_nls_cp437 is not set
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
# FREETZ_MODULE_nls_iso8859_1 is not set
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_ntfs is not set
# FREETZ_MODULE_reiserfs is not set
# FREETZ_MODULE_smbfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdos is not set
# FREETZ_MODULE_jffs2 is not set
# FREETZ_MODULE_mbcache is not set

#
# lib
#
# FREETZ_MODULE_crc_ccitt is not set
# FREETZ_MODULE_lzo_compress is not set
# FREETZ_MODULE_lzo_decompress is not set

#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
# FREETZ_MODULE_cls_u32 is not set
# FREETZ_MODULE_l2cap is not set

#
# network scheduler
#
# FREETZ_MODULE_sch_cbq is not set
# FREETZ_MODULE_sch_htb is not set
# FREETZ_MODULE_sch_llq is not set
# FREETZ_MODULE_sch_sfq is not set
# FREETZ_MODULE_sch_tbf is not set
# FREETZ_MODULE_rfcomm is not set
# FREETZ_MODULE_sunrpc is not set

#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_BRCTL is not set
# FREETZ_BUSYBOX_BZIP2 is not set
# FREETZ_BUSYBOX_CHGRP is not set
# FREETZ_BUSYBOX_FEATURE_DD_IBS_OBS is not set
# FREETZ_BUSYBOX_DNSD is not set
# FREETZ_BUSYBOX_DIFF is not set
# FREETZ_BUSYBOX_DOS2UNIX is not set
# FREETZ_BUSYBOX_ETHER_WAKE is not set
# FREETZ_BUSYBOX_FAKEIDENTD is not set
# FREETZ_BUSYBOX_FANCY_KEYS is not set
# FREETZ_BUSYBOX_FUSER is not set
# FREETZ_BUSYBOX_INETD is not set
# FREETZ_BUSYBOX_IP is not set
# FREETZ_BUSYBOX_LAST is not set
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_LONG_OPTS is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
# FREETZ_BUSYBOX_MD5SUM is not set
# FREETZ_BUSYBOX_MDEV is not set
# FREETZ_BUSYBOX_MODINFO is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_MOUNT_LABEL is not set
# FREETZ_BUSYBOX_NICE is not set
# FREETZ_BUSYBOX_PATCH is not set
# FREETZ_BUSYBOX_PSCAN is not set
FREETZ_BUSYBOX_REALPATH=y
# FREETZ_BUSYBOX_RENICE is not set
# FREETZ_BUSYBOX_SEQ is not set
# FREETZ_BUSYBOX_SHA1SUM is not set
# FREETZ_BUSYBOX_SPLIT is not set
# FREETZ_BUSYBOX_START_STOP_DAEMON is not set
# FREETZ_BUSYBOX_TAC is not set
# FREETZ_BUSYBOX_TAR_OLDGNU_COMPATIBILITY is not set
# FREETZ_BUSYBOX_UDHCPC is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_UNIX2DOS is not set
# FREETZ_BUSYBOX_UNZIP is not set
# FREETZ_BUSYBOX_FEATURE_USERNAME_COMPLETION is not set
# FREETZ_BUSYBOX_VOLUMEID is not set
# FREETZ_BUSYBOX_WGET is not set
# FREETZ_BUSYBOX_WHO is not set
# FREETZ_BUSYBOX_WHOAMI is not set

#
# Shared libraries
#
# FREETZ_STRIP_LIBRARIES is not set
# FREETZ_REPLACE_SSL_LIBS is not set

#
# Libraries -------------------------------
#

#
# C++
#
# FREETZ_LIB_STDCXXLIB is not set
# FREETZ_LIB_STDCXXLIB_WITH_WCHAR is not set
# FREETZ_LIB_libstdc__ is not set
# FREETZ_LIB_libuClibc__ is not set

#
# Crypto & SSL
#

#
# Math -----------------------------------
#
# FREETZ_LIB_libgmp is not set
# FREETZ_LIB_libmpfr is not set
# FREETZ_LIB_libmpc is not set

#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set

#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libpolarssl is not set
# FREETZ_LIB_libcrypto is not set

#
# GnuTLS ---------------------------------
#
# FREETZ_LIB_libgnutls is not set
# FREETZ_LIB_libtasn1 is not set

#
# Data compression
#
# FREETZ_LIB_liblzo2 is not set
# FREETZ_LIB_libz is not set

#
# e2fsprogs libraries
#
# FREETZ_LIB_libblkid is not set
# FREETZ_LIB_libcom_err is not set
# FREETZ_LIB_libe2p is not set
# FREETZ_LIB_libext2fs is not set
# FREETZ_LIB_libss is not set
# FREETZ_LIB_libuuid is not set

#
# GLib
#
# FREETZ_LIB_libglib_1 is not set
# FREETZ_LIB_libglib_2 is not set
# FREETZ_LIB_libgio_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set

#
# Graphics & fonts
#
# FREETZ_LIB_libfreetype is not set
# FREETZ_LIB_libart_lgpl_2 is not set
# FREETZ_LIB_libexif is not set
# FREETZ_LIB_libjpeg is not set
# FREETZ_LIB_libpng12 is not set
# FREETZ_LIB_libgd is not set
# FREETZ_LIB_libopenjpeg is not set
# FREETZ_LIB_libnetpbm is not set

#
# Multimedia
#

#
# FFmpeg libraries
#
# FREETZ_LIB_libavcodec is not set
# FREETZ_LIB_libavdevice is not set
# FREETZ_LIB_libavformat is not set
# FREETZ_LIB_libavutil is not set
# FREETZ_LIB_libpostproc is not set

#
# Ogg/Vorbis
#
# FREETZ_LIB_libogg is not set
# FREETZ_LIB_libvorbis is not set
# FREETZ_LIB_libvorbisenc is not set
# FREETZ_LIB_libvorbisfile is not set
# FREETZ_LIB_libFLAC is not set
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libtag is not set

#
# ncurses
#
# FREETZ_LIB_libncurses is not set

#
# terminfo database
#

#
# Select terminfo database entries to install (see help of 'Show all items')
#
# FREETZ_SHARE_terminfo is not set
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set

#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set

#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
# FREETZ_LIB_libresolv is not set
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
# FREETZ_LIB_libutil is not set

#
# XML/XSLT
#
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libxml2 is not set
# FREETZ_LIB_libxslt is not set
# FREETZ_LIB_libexslt is not set
# FREETZ_LIB_libapr is not set
# FREETZ_LIB_libaprutil is not set
# FREETZ_LIB_libdb is not set
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libcapi20 is not set
FREETZ_LIB_libgcc_s=y
# FREETZ_LIB_libconfig is not set
# FREETZ_LIB_libcurl is not set
# FREETZ_LIB_libdaemon is not set
# FREETZ_LIB_libdevmapper is not set
# FREETZ_LIB_libdnet is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libevent is not set
# FREETZ_LIB_libffi is not set
# FREETZ_LIB_libftdi is not set
FREETZ_LIB_libfreetz=y
# FREETZ_LIB_libfuse is not set
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libintl is not set
# FREETZ_LIB_libjs is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_liblua is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libnet is not set
# FREETZ_LIB_libntfs is not set
# FREETZ_LIB_libopenobex is not set
# FREETZ_LIB_liboping is not set
# FREETZ_LIB_libosip2 is not set
# FREETZ_LIB_libosipparser2 is not set
# FREETZ_LIB_libpcap is not set
# FREETZ_LIB_libpcre is not set
# FREETZ_LIB_libpcreposix is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_librrd is not set
# FREETZ_LIB_librrd_th is not set
# FREETZ_LIB_libslang is not set
# FREETZ_LIB_libsqlite3 is not set
# FREETZ_LIB_libsynce is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libusb is not set
# FREETZ_LIB_libusb_1 is not set
# FREETZ_LIB_libatm is not set
# FREETZ_LIB_libwx_baseu is not set

#
# External
#
# EXTERNAL_ENABLED is not set
FREETZ_TARGET_ARCH_LE=y
FREETZ_TARGET_ARCH="mipsel"
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"

#
# Toolchain options
#
FREETZ_DOWNLOAD_TOOLCHAIN=y
# FREETZ_BUILD_TOOLCHAIN is not set
FREETZ_KERNEL_VERSION_2_6_13_1=y
# FREETZ_KERNEL_VERSION_2_6_19_2 is not set
# FREETZ_KERNEL_VERSION_2_6_28 is not set
# FREETZ_KERNEL_VERSION_2_6_32 is not set
FREETZ_KERNEL_VERSION="2.6.13.1"
FREETZ_KERNEL_LAYOUT_OHIO=y
FREETZ_KERNEL_LAYOUT="ohio"
FREETZ_UCLIBC_0_9_28_BASED_BOX=y
# FREETZ_UCLIBC_0_9_29_BASED_BOX is not set
# FREETZ_UCLIBC_0_9_30_BASED_BOX is not set
# FREETZ_UCLIBC_0_9_31_BASED_BOX is not set

#
# Kernel toolchain options ----------------------------------
#
FREETZ_KERNEL_COMPILER_GCC_3_4_6=y
# FREETZ_KERNEL_COMPILER_GCC_4_4_6 is not set
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.18"

#
# Target toolchain options ----------------------------------
#
FREETZ_TARGET_UCLIBC_VERSION_0_9_28=y
# FREETZ_TARGET_UCLIBC_VERSION_0_9_29 is not set
# FREETZ_TARGET_UCLIBC_VERSION_0_9_30 is not set
# FREETZ_TARGET_UCLIBC_VERSION_0_9_31 is not set
# FREETZ_TARGET_UCLIBC_VERSION_0_9_32 is not set
FREETZ_TARGET_COMPILER_GCC_4_4_6=y
# FREETZ_TARGET_COMPILER_GCC_4_5_3 is not set
# FREETZ_TARGET_COMPILER_GCC_4_6_1 is not set
FREETZ_STDCXXLIB_USE_UCLIBCXX=y
# FREETZ_STDCXXLIB_USE_GNULIBSTDCXX is not set
FREETZ_TARGET_UCLIBC_VERSION="0.9.28"
FREETZ_TARGET_GCC_VERSION="4.4.6"
FREETZ_GNULIBSTDCXX_VERSION="6.0.13"
FREETZ_STDCXXLIB="uclibcxx"
FREETZ_TARGET_BINUTILS_VERSION="2.21.52.0.2"
FREETZ_TARGET_UCLIBC_REF="mod"
FREETZ_TARGET_CFLAGS="-Os -pipe -Wa,--trap"
# FREETZ_TARGET_UCLIBC_REDUCED_LOCALE_SET is not set
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
# FREETZ_TARGET_TOOLCHAIN is not set

#
# Both kernel and target toolchain related options ----------
#
# FREETZ_STATIC_TOOLCHAIN is not set
FREETZ_TOOLCHAIN_MINIMIZE_REQUIRED_GLIBC_VERSION=y
# FREETZ_BUILD_32BIT_TOOLCHAIN is not set
# FREETZ_TARGET_CCACHE is not set

hippie2000 · 14 Okt 2011

hi, sorry musste heut mittag spontan weg ausm irc.

ich wäre weiterhin am syslog interessiert (boot und auch langzeit) kannst ja nochmal reinschaun in irc.

das dsl damit funktioniert ist ne feine sache. ich interessier mich für die nebeneffekte, da du jetzt verschiedene generationen firmwareteile miteinander bertreibst. die sieht man idr im syslog. auch paar andere diagnoseanfragen hätt ich dazu die ich ohne ein solches gerät nicht selbst reproduzueren kann.

Fritz 3131 anpassen?

Neuer User

IPPF-Urgestein

IPPF-Urgestein

Neuer User

IPPF-Urgestein

IPPF-Promi

IPPF-Urgestein

IPPF-Promi

Neuer User

IPPF-Urgestein

IPPF-Promi

IPPF-Urgestein

IPPF-Promi

IPPF-Urgestein

Neuer User

Anhänge

Mitglied

Statistik des Forums