3270 Annex A (got it working!!)
Use the directions below and fix your box to support Annex A!
- Installed ubuntu-9.10-desktop-i386 on VMWare Workstation
- Installed svnclient
sudo apt-get update
sudo apt-get install subversion-tools
- Checked out latest version of Freetz
svn co
http://svn.freetz.org/trunk/ freetz-trunk
- Installed needed components
http://wiki.ip-phone-forum.de/software:ds-mod:installation#linux
sudo apt-get install gcc
sudo apt-get install g++
sudo apt-get install binutils
sudo apt-get install autoconf
sudo apt-get install automake
sudo apt-get install libtool
sudo apt-get install bzip2
sudo apt-get install libncurses5-dev
sudo apt-get install zlib1g-dev
sudo apt-get install zlib1g-dev
sudo apt-get install flex
sudo apt-get install bison
sudo apt-get install patch
sudo apt-get install texinfo
sudo apt-get install tofrodos
sudo apt-get install gettext
sudo apt-get install jam
sudo apt-get install pkg-config
sudo apt-get install libecj-java
sudo apt-get install perl
sudo apt-get install libstring-crc32-perl
- changed to directory freetz-trunk
cd freetz-trunk
- executed "make"
I choose the following options:
[General]
Hardware type (WLAN 3270 (v3 only)) **Mandatory**
Some other options might be of interest to you, decide yourself...
- executed "make"
Takes about 20 minutes depending on choosen options
and needs internet connectivity.
- noted the name of the generated image, e.g. 3270_v3_04.80freetz-devel-4300.de_xxxxxxxx-xxxxxx.image
- Unpack the generated image
sudo ./fwmod -u -d 3270de ./images/3270_v3_04.80freetz-devel-4301.de_xxxxxxxx-xxxxxx.image
- copy the folder 'original' from 3270 to 'modified'
sudo cp -r ./3270de/original ./3270de/modified
- download firmware FRITZ.Box_Fon_WLAN_7270_v3.74.04.80.image
wget
ftp://ftp.avm.de/fritz.box/fritzbox...sch/FRITZ.Box_Fon_WLAN_7270_v3.74.04.80.image
- Unpack the 7270 image
sudo ./fwmod -u -d 7270de FRITZ.Box_Fon_WLAN_7270_v3.74.04.80.image
- Edit the rc.conf
sudo gedit ./3270de/modified/filesystem/etc/init.d/rc.conf
- Replace section ANNEX with:
##########################################################################################
## Annex
##########################################################################################
if [ -z "$annex_param" ] ; then
if [ "${CONFIG_DSL_MULTI_ANNEX}" = "y" ] ; then
LOADANNEX=`echo ar7cfg.dslglobalconfig.Annex | ar7cfgctl -s 2>/dev/null | sed s/\\"//g` ; # annex aus userselection?
if [ -z "${LOADANNEX}" ] ; then
export ANNEX=`cat $CONFIG_ENVIRONMENT_PATH/annex` ; # annex aus /proc nehmen, nicht von Config!
else
export ANNEX=${LOADANNEX} ; # annex aus userselection
fi
else
export ANNEX=`cat $CONFIG_ENVIRONMENT_PATH/annex` # annex aus /proc nehmen, nicht von Config!
fi
if [ -z "${ANNEX}" ] ; then export ANNEX=${CONFIG_ANNEX} ; fi # nur wenn vom /proc nix kommt, default setzen.
else # annex_param
echo "overwrite annex"
export ANNEX=$annex_param
fi
- Replace (occurs three times)
export CONFIG_ANNEX="B"
with
export CONFIG_ANNEX="A"
- Replace:
export CONFIG_DSL_MULTI_ANNEX=”n”
with
export CONFIG_DSL_MULTI_ANNEX=”y”
- Replace:
export OEM
with
export OEM=”avm”
- copy the Annex A module from 7270 source
sudo cp ./7270de/original/filesystem/lib/modules/dsp_ur8/ur8-A-dsl.bin ./3270de/modified/filesystem/lib/modules/dsp_ur8/
- Create the modified image:
sudo ./fwmod -p -d 3270de ./images/3270_v3_04.80freetz-devel-4301.de_xxxxxxxx-xxxxxx.image
- Note the name and location of the generated image
./3270de/3270_v3_.de_xxxxxxxx-xxxxxx.image
- Copy the file to the VMware Host
- from the web interface of the Fritzbox uploaded the modified firmware image
- reboot
- done
I noticed a lot of people are searching for this solution, so I decided to share my experience. Have fun everyone!
Greetz
Mike
