alte Fritze mit freetz Flashen

[silverstar`-]

Habe in freetz mal die Syslog eingefügt:

Feb 20 18:11:13 fritz user.warn kernel: [genprobe_ident_chips] 4 i 0 j 0
Feb 20 18:11:13 fritz user.warn kernel: [genprobe_ident_chips] 5 i 0 j 1
Feb 20 18:11:13 fritz user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Feb 20 18:11:13 fritz user.warn kernel: phys_mapped_flash: Swapping erase regions for broken CFI table.
Feb 20 18:11:13 fritz user.notice kernel: number of CFI chips: 1
Feb 20 18:11:13 fritz user.notice kernel: RedBoot partition parsing not available
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f5418: platram_init+0x0/0x30()
Feb 20 18:11:13 fritz user.warn kernel: Generic platform RAM MTD, (c) 2004 Simtec Electronics
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f5448: init_ohio_flash+0x0/0x868()
Feb 20 18:11:13 fritz user.notice kernel: Ohio flash driver (size->0x400000 mem->0x10000000)
Feb 20 18:11:13 fritz user.warn kernel: flash_size=0x400000
Feb 20 18:11:13 fritz user.warn kernel: flash_mask=0x7fffff
Feb 20 18:11:13 fritz user.info kernel: AR7 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Feb 20 18:11:13 fritz user.warn kernel: [genprobe_ident_chips] 4 i 0 j 0
Feb 20 18:11:13 fritz user.warn kernel: [genprobe_ident_chips] 5 i 0 j 1
Feb 20 18:11:13 fritz user.warn kernel: Amd/Fujitsu Extended Query Table at 0x0040
Feb 20 18:11:13 fritz user.warn kernel: AR7 flash memory: Swapping erase regions for broken CFI table.
Feb 20 18:11:13 fritz user.notice kernel: number of CFI chips: 1
Feb 20 18:11:13 fritz user.warn kernel: [mtd]: set to default: jffs2_size = 0x20 * 64KByte (0x200000 Bytes)
Feb 20 18:11:13 fritz user.warn kernel: [ohio_find_hidden_filesystem]: super block found: bytes_used: 0x2391cc/2331084
Feb 20 18:11:13 fritz user.warn kernel: [init_ohio_flash] find hidden filesystem size=0x30d100 offset=0xb2f00
Feb 20 18:11:13 fritz user.warn kernel: [mtd] configure jffs2 partition
Feb 20 18:11:13 fritz user.warn kernel: [mtd] fs_size=0x2e0000 max=0xd0000 is=0x200000 max jffs2_size value 13
Feb 20 18:11:13 fritz user.warn kernel: [mtd] ERROR jffs2_size too big, reduce to max
Feb 20 18:11:13 fritz user.warn kernel: [mtd] ohio_flash_map: name=AR7 flash memory bankwidth=2 virt=0xb0000000 phys=0x10000000 size=0x400000
Feb 20 18:11:13 fritz user.notice kernel: Creating 7 MTD partitions on "AR7 flash memory":
Feb 20 18:11:13 fritz user.notice kernel: 0x000b2f00-0x003c0000 : "filesystem"
Feb 20 18:11:13 fritz user.notice kernel: 'nor-flash'
Feb 20 18:11:13 fritz user.warn kernel: 'Bits can be cleared (flash)'
Feb 20 18:11:13 fritz user.warn kernel: 'Has an erase function'
Feb 20 18:11:13 fritz user.warn kernel: mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only
Feb 20 18:11:13 fritz user.notice kernel: 0x00010000-0x003c0000 : "kernel"
Feb 20 18:11:13 fritz user.notice kernel: 'nor-flash'
Feb 20 18:11:13 fritz user.warn kernel: 'Bits can be cleared (flash)'
Feb 20 18:11:13 fritz user.warn kernel: 'Has an erase function'
Feb 20 18:11:13 fritz user.notice kernel: 0x00000000-0x00010000 : "bootloader"
Feb 20 18:11:13 fritz user.notice kernel: 'nor-flash'
Feb 20 18:11:13 fritz user.warn kernel: 'Bits can be cleared (flash)'
Feb 20 18:11:13 fritz user.warn kernel: 'Has an erase function'
Feb 20 18:11:13 fritz user.notice kernel: 0x003c0000-0x003e0000 : "tffs (1)"
Feb 20 18:11:13 fritz user.notice kernel: 'nor-flash'
Feb 20 18:11:13 fritz user.warn kernel: 'Bits can be cleared (flash)'
Feb 20 18:11:13 fritz user.warn kernel: 'Has an erase function'
Feb 20 18:11:13 fritz user.notice kernel: 0x003e0000-0x00400000 : "tffs (2)"
Feb 20 18:11:13 fritz user.notice kernel: 'nor-flash'
Feb 20 18:11:13 fritz user.warn kernel: 'Bits can be cleared (flash)'
Feb 20 18:11:13 fritz user.warn kernel: 'Has an erase function'
Feb 20 18:11:13 fritz user.notice kernel: 0x002f0000-0x003c0000 : "jffs2"
Feb 20 18:11:13 fritz user.notice kernel: 'nor-flash'
Feb 20 18:11:13 fritz user.warn kernel: 'Bits can be cleared (flash)'
Feb 20 18:11:13 fritz user.warn kernel: 'Has an erase function'
Feb 20 18:11:13 fritz user.notice kernel: 0x00010000-0x002f0000 : "Kernel without jffs2"
Feb 20 18:11:13 fritz user.notice kernel: 'nor-flash'
Feb 20 18:11:13 fritz user.warn kernel: 'Bits can be cleared (flash)'
Feb 20 18:11:13 fritz user.warn kernel: 'Has an erase function'
Feb 20 18:11:13 fritz user.warn kernel: partition_info[0]: name=filesystem offset=b2f00 size=30d100
Feb 20 18:11:13 fritz user.warn kernel: partition_info[0]: 0xb00b2f00: 0x73717368 0x60a
Feb 20 18:11:13 fritz user.warn kernel: partition_info[1]: name=kernel offset=10000 size=3b0000
Feb 20 18:11:13 fritz user.warn kernel: partition_info[1]: 0xb0010000: 0xfeed1281 0xa2dfe
Feb 20 18:11:13 fritz user.warn kernel: partition_info[2]: name=bootloader offset=0 size=10000
Feb 20 18:11:13 fritz user.warn kernel: partition_info[2]: 0xb0000000: 0x40809000 0x40809800
Feb 20 18:11:13 fritz user.warn kernel: partition_info[3]: name=tffs (1) offset=3c0000 size=20000
Feb 20 18:11:13 fritz user.warn kernel: partition_info[3]: 0xb03c0000: 0x40001 0xdffeffff
Feb 20 18:11:13 fritz user.warn kernel: partition_info[4]: name=tffs (2) offset=3e0000 size=20000
Feb 20 18:11:13 fritz user.warn kernel: partition_info[4]: 0xb03e0000: 0x40001 0xe0feffff
Feb 20 18:11:13 fritz user.warn kernel: partition_info[5]: name=jffs2 offset=2f0000 size=d0000
Feb 20 18:11:13 fritz user.warn kernel: partition_info[5]: 0xb02f0000: 0xffffffff 0xffffffff
Feb 20 18:11:13 fritz user.warn kernel: partition_info[6]: name=Kernel without jffs2 offset=10000 size=2e0000
Feb 20 18:11:13 fritz user.warn kernel: partition_info[6]: 0xb0010000: 0xfeed1281 0xa2dfe
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f5e90: kcapi_init+0x0/0x9c()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f5fd4: capi_oslib_init+0x0/0x8()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f6ab4: blackhole_module_init+0x0/0xc()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f77a4: inet_init+0x0/0x504()
Feb 20 18:11:13 fritz user.info kernel: NET: Registered protocol family 2
Feb 20 18:11:13 fritz user.warn kernel: IP route cache hash table entries: 256 (order: -2, 1024 bytes)
Feb 20 18:11:13 fritz user.warn kernel: TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Feb 20 18:11:13 fritz user.warn kernel: TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Feb 20 18:11:13 fritz user.info kernel: TCP: Hash tables configured (established 1024 bind 1024)
Feb 20 18:11:13 fritz user.info kernel: TCP reno registered
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941fa1cc: init+0x0/0x8()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941fa1d4: bictcp_register+0x0/0xc()
Feb 20 18:11:13 fritz user.info kernel: TCP bic registered
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941fa1e0: mcfw_init_module+0x0/0x2c()
Feb 20 18:11:13 fritz user.info kernel: mcfw: IGMPv3 fast forwarding
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941fa20c: af_unix_init+0x0/0xa0()
Feb 20 18:11:13 fritz user.info kernel: NET: Registered protocol family 1
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941fa2ac: packet_init+0x0/0x80()
Feb 20 18:11:13 fritz user.info kernel: NET: Registered protocol family 17
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941fa32c: br_init+0x0/0x68()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941fa3e8: atm_init+0x0/0xec()
Feb 20 18:11:13 fritz user.info kernel: NET: Registered protocol family 8
Feb 20 18:11:13 fritz user.info kernel: NET: Registered protocol family 20
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941fa58c: br2684_init+0x0/0x54()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941e5028: ar7_install_dummy_irq_functions+0x0/0x58()
Feb 20 18:11:13 fritz user.warn kernel: [setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 )
Feb 20 18:11:13 fritz user.warn kernel: [setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x1c )
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x9400167c: ar7_late_init+0x0/0x3c()
Feb 20 18:11:13 fritz user.warn kernel: [ar7_late_init]
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941e518c: ar7_clk_switch_init+0x0/0x60()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941e543c: speedup_init+0x0/0x3c()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f2980: seqgen_init+0x0/0x20()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f398c: tffs_init+0x0/0x224()
Feb 20 18:11:13 fritz user.warn kernel: TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
Feb 20 18:11:13 fritz user.warn kernel: mount on mtd4 and mtd5 (double buffering)
Feb 20 18:11:13 fritz user.info kernel: Adam2 environment variables API installed.
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f47dc: early_uart_console_switch+0x0/0xb4()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941206e8: net_random_reseed+0x0/0x34()
Feb 20 18:11:13 fritz user.debug kernel: Calling initcall 0x941f8cc4: ip_auto_config+0x0/0x1130()
Feb 20 18:11:13 fritz user.warn kernel: [prepare_namespace] new mount root /dev/mtdblock1
Feb 20 18:11:13 fritz user.warn kernel: use lzma compression
Feb 20 18:11:13 fritz user.warn kernel: VFS: Mounted root (squashfs filesystem) readonly.
Feb 20 18:11:13 fritz user.warn kernel: Freeing prom memory: 0kb freed
Feb 20 18:11:13 fritz user.info kernel: Freeing unused kernel memory: 112k freed (3531 free)
Feb 20 18:11:13 fritz user.warn kernel: [setup_irq]: irq 15 irqaction->handler 0x940d5f20 (serial8250_interrupt+0x0/0x13c )
Feb 20 18:11:13 fritz user.warn kernel: AR7WDT: System Init UEberwachung 120 Sekunden
Feb 20 18:11:13 fritz user.warn kernel: TFFS Name Table 9
Feb 20 18:11:13 fritz user.warn kernel: kdsldmod: module license 'unspecified' taints kernel.
Feb 20 18:11:13 fritz user.info kernel: kdsldmod: init start (May 10 2007 13:25:55) sizeof(struct sk_buff)=176
Feb 20 18:11:13 fritz user.info kernel: kdsldmod: init done
Feb 20 18:11:13 fritz user.info kernel: kdsld: PPP led: off (value=0)
Feb 20 18:11:13 fritz user.err kernel: [cpmac] cpmac_main_ioctl, unknown ioctl 35142
Feb 20 18:11:13 fritz user.info kernel: device eth0 entered promiscuous mode
Feb 20 18:11:13 fritz user.warn kernel: [setup_irq]: irq 27 irqaction->handler 0x940e6c4c (cpmac_main_isr+0x0/0x78 )
Feb 20 18:11:13 fritz user.info kernel: lan: port 1(eth0) entering learning state
Feb 20 18:11:13 fritz user.info kernel: lan: topology change detected, propagating
Feb 20 18:11:13 fritz user.info kernel: lan: port 1(eth0) entering forwarding state
Feb 20 18:11:13 fritz user.err kernel: [avm_power] : ethernet not registered
Feb 20 18:11:13 fritz user.err kernel: [avm_power] : ethernet not registered
Feb 20 18:11:13 fritz user.err kernel: [avm_power] : ethernet not registered
Feb 20 18:11:13 fritz user.err kernel: [avm_power] : ethernet not registered
Feb 20 18:11:13 fritz user.warn kernel: AR7WDT: System Init UEberwachung abgeschlossen (103350 ms noch verfuegbar)
Feb 20 18:11:18 fritz user.notice FREETZMOD: Starting bip ... done.
Feb 20 18:11:19 fritz user.notice FREETZMOD: Starting umurmur ... done.
Feb 20 18:11:19 fritz daemon.info uMurmurd[977]: PID-file: /var/run/umurmur.pid
Feb 20 18:11:20 fritz daemon.crit uMurmurd[977]: Could not read certificate file '/etc/umurmur/certificate.crt'
Feb 20 18:11:20 fritz user.notice ONLINECHANGED[524]: [online] approved
Feb 20 18:11:20 fritz user.notice ONLINECHANGED[524]: [online] executing /etc/onlinechanged/00-get_ip
Feb 20 18:11:20 fritz user.notice ONLINECHANGED[524]: [online] finished
Feb 20 18:11:24 fritz user.notice FREETZMOD: rc.mod finished.
Feb 20 18:11:24 fritz user.warn kernel: /proc/tffs: info request: success
Feb 20 18:11:28 fritz user.err webcm[1297]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:11:31 fritz user.err webcm[1298]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:11:38 fritz user.err webcm[1299]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:11:38 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:11:38 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:11:38 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:11:38 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:13:17 fritz user.err webcm[1300]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:13:17 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:13:17 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:13:17 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:13:17 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:13:19 fritz user.err webcm[1301]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:13:19 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:13:19 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:13:19 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:13:19 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated
Feb 20 18:13:21 fritz user.err webcm[1302]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:13:22 fritz user.err webcm[1303]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:13:23 fritz user.err webcm[1304]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:13:25 fritz user.err webcm[1305]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:13:27 fritz user.err webcm[1306]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:13:29 fritz user.err webcm[1307]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:13:33 fritz user.err webcm[1308]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:44:33 fritz user.err webcm[1768]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 18:44:33 fritz user.info webcm0: MakeLanguagePath html=../html tail=login.html -> ../html/login.html
Feb 20 19:52:48 fritz user.err webcm[1769]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 20 19:52:48 fritz user.info webcm0: MakeLanguagePath html=../html tail=login.html -> ../html/login.html
Feb 20 19:53:11 fritz user.warn kernel: /proc/tffs: info request: success
Feb 20 19:54:09 fritz user.warn kernel: /proc/tffs: info request: success
Feb 21 00:02:28 fritz user.err mailer[2093]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 21 00:02:28 fritz user.info mailer[2093]: startup (May 8 2007 19:06:07) Mail: Subject: FRITZ!Box Push Service vom 21.02.2014, From: "FRITZ!Box Fon" <[email protected]>, To: [...], Attachment: Null
Feb 21 00:02:28 fritz user.info mailer[2093]: dns: [...]: query
Feb 21 00:02:28 fritz user.info mailer[2093]: dns: [...]: 80.237.133.62 ttl=3600 from 127.0.0.1.
Feb 21 00:02:35 fritz user.info mailer[2093]: Testmail sent
Feb 21 00:02:35 fritz user.info mailer[2093]: mailer finished with 0, Mailer-Response=250 OK id=1WGcdQ-0000NQ-Ep
Feb 21 12:16:59 fritz user.err webcm[2097]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 21 12:16:59 fritz user.info webcm0: MakeLanguagePath html=../html tail=login.html -> ../html/login.html
Feb 21 12:31:00 fritz user.err webcm[2098]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 21 12:31:05 fritz user.err webcm[2099]: Couldn't load shared library libavmssl.so - File not found - Success (0)
Feb 21 17:47:44 fritz user.warn kernel: /proc/tffs: info request: success
Feb 21 17:49:11 fritz user.warn kernel: /proc/tffs: info request: success

Die Box läuft knapp 24stunden.
Habe ein google nichts auf die schnelle über die andere befehle gefunden.

 

[silverstar`-]

Nach dem ich dann jetzt aus freetz "oidentd" entfernt habe, hat sie aufgehört wie wild zu blinken ... Läuft aber dennoch

 

[olistudent]

Ich bezweifle sehr, dass oidentd was damit zu tun hatte!? Falls es wirklich an der Änderung lag muss sich durch die Abwahl von oident noch was geändert haben. Ich kann in den Logs auf alle Fälle nicht verdächtiges finden.

Feb 20 18:11:38 fritz user.err webcm[1299]: Couldn't load shared library  libavmssl.so - File not found - Success (0)
Feb 20 18:11:38 fritz user.err webcm0: BUG slabuser: slab_free(0): not allocated

Das sieht nicht ganz okay aus. Könnte auf den alten Boxen aber auch normal sein?

Gruß
Oliver

 

[silverstar`-]

keine ahnung :-(

Aufjedenfall scheint die Kiste nicht genügend Speicher zu haben, das auch uMurmur läuft ... was ich mal testen wollte.

Update:
Kann man iwie über die Kiste eine Wabcam betreiben? Das bild dann iwie aufn PC bekommen.
Habe nur diesen anderen USB Anschluss an der Kiste, Bild.

An der Cam ist der normal USB-Stecker.

 

[RalfFriedl]

Das (libavmssl.so) sieht nicht ganz okay aus. Könnte auf den alten Boxen aber auch normal sein?

Ja, ist es.

 

[Nuems]

Den USB-Port kann man nicht für USB-Geräte nutzen. Er dient dazu, die FB als USB-Netzwerksgerät an einen Host anzuschließen, also z.B., wenn nur ein PC mit dem Internet verbunden werden soll. Ich habe damit auch mal eine USB-Netzwerksverbindung zu einer MIPS-Linux-Box aufgebaut, musste aber zumindest bei der FB SL WLAN feststellen, dass es sich FB-seitig um eine USB 1.1-Schnittstelle handelt, was mir zu lahm war.

Gruß,

Thomas

 

[silverstar`-]

Schade, naja muss ne andere Möglichkeit zur Überwachung her.
Danke