FBF 7170 Y-shaped cable.

Hello,

Being a none german native, I am requesting your help in english.

A german colleague send me his unused FBF 7170 v2, labeled from 1und1.
All cables and adapter are "lost".

I do have a PSTN line (analog) at home. As I already have a working FBF 7050 Annex A, I use a master PSTN splitter from which 2 RJ45 cables goes to the back of FBF7050 DSL and Tel connectors.

I found here the layout of the Y-shaped cable for the FBF7170. So, I made my own cable.
So from my PSTN master splitter, the telefon outputs cable goes to the pins 3 and 6 of the back DSL/Tel connector of the FBF7170.
Then the modem output of the PSTN master splitter goes to the pins 4 and 5 of the back DSL/Tel connector of the FBF7170.

The telephon works fine, I can use it to call and get it ring when someone calls me.
But my ADSL connection is not working. I have properly configured my ADSL settings.(userid and password)
The log indicates DSL "training". I noticed on the statistic menu that there is no signal.

I thought that the FBF7170 from 1und1 was able to work as an ADSL modem for PSTN and ISDN line.

I would appreciate any help.

Woow, that was fast. Thx.

No, I did not modify it yet as i was not sure. I just updated it with the last firmware from AVM.

I don't have the box with me, at work for the moment, but i am 80% sure that there is no indication of any Annex.

I read somewhere that some files could be put in the box using telnet. In the first post of this section, I believe.

Is there a full procedure that even a monkey could do ?

Thanks for the guidance Marsupilami.

I also found this one in English:
http://www.ip-phone-forum.de/showthread.php?p=555396

I will try it tonight.


Have a nice day.