pluto70 schrieb:
crich schrieb:
make: *** /lib/modules/2.6.15-26-server/build: No such file or directory. Stop.Making mISDN
=============
cp /usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/Makefile.v2.6 /usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/Makefile
export MINCLUDES=/usr/src/mISDN-1_0_4/include ; make -C /lib/modules/2.6.15-26-server/build SUBDIRS=/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN modules CONFIG_MISDN_DRV=m CONFIG_MISDN_DSP=m CONFIG_MISDN_HFCMULTI=m CONFIG_MISDN_HFCPCI=m CONFIG_MISDN_HFCUSB=m CONFIG_MISDN_XHFC=m CONFIG_MISDN_HFCMINI=m CONFIG_MISDN_W6692=m CONFIG_MISDN_SPEEDFAX=m CONFIG_MISDN_AVM_FRITZ=m CONFIG_MISDN_NETJET=m
make[1]: Entering directory `/usr/src/linux-headers-2.6.15-26-server'
CC [M] /usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.o
In file included from /usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/channel.h:16,
from /usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:20:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h: In function ‘mISDN_queueup_newhead’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:189: warning: implicit declaration of function ‘mISDN_queue_message’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:189: error: ‘FLG_MSG_UP’ undeclared (first use in this function)
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:189: error: (Each undeclared identifier is reported only once
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:189: error: for each function it appears in.)
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h: In function ‘mISDN_queuedown_newhead’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:199: error: ‘FLG_MSG_DOWN’ undeclared (first use in this function)
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h: At top level:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:280: error: syntax error before ‘*’ token
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:280: error: syntax error before ‘ie_info_t’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:280: warning: type defaults to ‘int’ in declaration of ‘mISDN_get_last_repeated_ie’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:280: warning: function declaration isn’t a prototype
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/helper.h:280: warning: data definition has no type or storage class
In file included from /usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:20:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/channel.h: In function ‘queue_ch_frame’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/channel.h:108: error: ‘FLG_MSG_UP’ undeclared (first use in this function)
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c: In function ‘write_ctrl’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:275: error: ‘mISDNinstance_t’ has no member named ‘privat’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c: In function ‘hdlc_empty_fifo’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:409: error: ‘mISDNinstance_t’ has no member named ‘privat’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c: In function ‘hdlc_fill_fifo’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:478: error: ‘mISDNinstance_t’ has no member named ‘privat’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c: In function ‘hdlc_down’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:769: error: ‘struct _mISDNinstance’ has no member named ‘hwlock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:775: error: ‘struct _mISDNinstance’ has no member named ‘hwlock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:781: error: ‘struct _mISDNinstance’ has no member named ‘hwlock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:784: error: ‘struct _mISDNinstance’ has no member named ‘hwlock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:791: error: ‘struct _mISDNinstance’ has no member named ‘hwlock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:804: error: ‘struct _mISDNinstance’ has no member named ‘hwlock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c: In function ‘release_card’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1055: warning: implicit declaration of function ‘mISDN_ctrl’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1056: error: ‘mISDNobject_t’ has no member named ‘lock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1058: error: ‘mISDNobject_t’ has no member named ‘lock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c: In function ‘fritz_manager’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1088: error: ‘mISDNobject_t’ has no member named ‘lock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1103: error: ‘mISDNobject_t’ has no member named ‘lock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1154: error: ‘FLG_MSG_UP’ undeclared (first use in this function)
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c: In function ‘setup_instance’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1187: error: ‘mISDNobject_t’ has no member named ‘lock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1189: error: ‘mISDNobject_t’ has no member named ‘lock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1192: error: ‘mISDNinstance_t’ has no member named ‘hwlock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1193: error: ‘mISDNinstance_t’ has no member named ‘class_dev’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1196: warning: passing argument 4 of ‘mISDN_init_instance’ from incompatible pointer type
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1202: warning: passing argument 4 of ‘mISDN_init_instance’ from incompatible pointer type
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1204: error: ‘mISDNinstance_t’ has no member named ‘hwlock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1205: error: ‘mISDNinstance_t’ has no member named ‘class_dev’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1218: error: ‘mISDNobject_t’ has no member named ‘lock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1220: error: ‘mISDNobject_t’ has no member named ‘lock’
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c: In function ‘Fritz_init’:
/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.c:1412: error: ‘mISDNobject_t’ has no member named ‘lock’
make[2]: *** [/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN/avm_fritz.o] Error 1
make[1]: *** [_module_/usr/src/mISDN-1_0_4/drivers/isdn/hardware/mISDN] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.15-26-server'
make: *** [all] Error 2-----------------------------------------
Loading module(s) for your misdn-cards:
-----------------------------------------
modprobe --ignore-install hfcmulti type=0x4 protocol=0x2,0x2,0x2,0x2 layermask=0xf,0xf,0xf,0xf poll=128 debug=0
modprobe mISDN_dsp debug=0x0 options=0 dtmftreshold=100ERROR[4841]: chan_misdn.c:4602 load_module: Unable to initialize mISDN0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25)
Flags: bus master, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Memory at eddff000 (32-bit, prefetchable) [size=4K]
I/O ports at dc00 [disabled] [size=4]
Capabilities: [a0] AGP version 1.0
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ede00000-efefffff
Prefetchable memory behind bridge: e1c00000-e5cfffff
0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev 01)
Subsystem: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA
Flags: bus master, medium devsel, latency 0
0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev 03) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at f000 [size=16]
0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
Flags: medium devsel
0000:00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB (rev 06) (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 16, IRQ 10
Memory at effff000 (32-bit, non-prefetchable) [size=4K]
0000:00:09.0 ISDN controller: Cologne Chip Designs GmbH: Unknown device 08b4 (rev 01)
Subsystem: Cologne Chip Designs GmbH: Unknown device b566
Flags: medium devsel, IRQ 9
I/O ports at d800 [size=8]
Memory at efffe000 (32-bit, non-prefetchable) [disabled] [size=4K]
Capabilities: [40] Power Management version 2
0000:00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
Subsystem: DELTA Electronics, Inc: Unknown device 2760
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d400 [size=128]
Memory at efffdc00 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at eff80000 [disabled] [size=256K]
Capabilities: [dc] Power Management version 1
0000:01:05.0 VGA compatible controller: nVidia Corporation NV6 [Vanta/Vanta LT] (rev 15) (prog-if 00 [VGA])
Subsystem: Elsa AG: Unknown device 0c25
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
Memory at e2000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at efef0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0#
# Configuration file for your misdn hardware
#
# Usage: /usr/sbin/misdn-init start|stop|restart|config|scan|help
#
#
# Card Settings
#
# Syntax: card=<number>,<type>[,<option>...]
#
# <number> count your cards beginning with 1
# <type> either 0x1,0x4 or 0x8 for your hfcmulti hardware,
# or the name of your card driver module.
# <option> ulaw - uLaw (instead of aLaw)
# dtmf - enable DTMF detection on all B-channels
#
# pcm_slave - set PCM bus into slave mode
# If you have a set of cards, all wired via PCM. Set
# all cards into pcm_slave mode and leave one out.
# The left card will automatically be Master.
#
# ignore_pcm_frameclock - this can be set in conjunction with
# pcm_slave. If this card has a
# PCI Bus Position before the Position
# of the Master, then this port cannot
# yet receive a frameclock, so it must
# ignore the pcm frameclock.
#
# rxclock - use clocking for pcm from ST Port
# crystalclock - use clocking for pcm from PLL (genrated on board)
# watchdog - This dual E1 Board has a Watchdog for
# transparent mode
#
#
card=1,0x2
#
# Port settings
#
# Syntax: <port_type>=<port_number>[,<port_number>...]
#
# <port_type> te_ptp - TE-Mode, PTP
# te_ptmp - TE-Mode, PTMP
# te_capi_ptp - TE-Mode (capi), PTP
# te_capi_ptmp - TE-Mode (capi), PTMP
# nt_ptp - NT-Mode, PTP
# nt_ptmp - NT-Mode, PTMP
# <port_number> port that should be considered
#
te_ptp=2
nt_ptp=1
#
# Port Options
#
# Syntax: option=<port_number>,<option>[,<option>...]
#
# <option> master_clock - use master clock for this S/T interface
# (only once per chip, only for HFC 8/4)
# optical - optical (only HFC-E1)
# los - report LOS (only HFC-E1)
# ais - report AIS (only HFC-E1)
# slip - report SLIP (only HFC-E1)
# nocrc4 - turn off crc4 mode use double frame instead
# (only HFC-E1)
#
# The master_clock option is essential for retrieving and transmitting
# faxes to avoid failures during transmission. It tells the driver to
# synchronize the Card with the given Port which should be a TE Port and
# connected to the PSTN in general.
#
option=2,master_clock
#option=2,ais,nocrc4
#option=3,optical,los,ais,slip
#
# General Options for your hfcmulti hardware
#
# poll=<number>
#
# Only one poll value must be given for all cards.
# Give the number of samples for each fifo process.
# By default 128 is used. Decrease to reduce delay, increase to
# reduce cpu load. If unsure, don't mess with it!!!
# Valid is 32, 64, 128, 256.
#
# dsp_poll=<number>
# This is the poll option which is used by mISDN_dsp, this might
# differ from the one given by poll= for the hfc based cards, since
# they can only use multiples of 32, the dsp_poll is dependant on
# the kernel timer setting which can be found in the CPU section
# in the kernel config. Defaults are there either 100Hz, 250Hz
# or 1000Hz. If your setting is either 1000 or 250 it is compatible
# with the poll option for the hfc chips, if you have 100 it is
# different and you need here a multiple of 80.
# The default is to have no dsp_poll option, then the dsp itself
# finds out which option is the best to use by itself
#
# pcm=<number>
#
# Give the id of the PCM bus. All PCM busses with the same ID
# are expected to be connected and have equal slots.
# Only one chip of the PCM bus must be master, the others slave.
#
# debug=<number>
#
# Enable debugging (see hfc_multi.h for debug options).
#
# dsp_options=<number>
#
# set this to 2 and you'll have software bridging instead of
# hardware bridging.
#
#
# dtmfthreshold=<milliseconds>
#
# Here you can tune the sensitivity of the dtmf tone recognizer.
#
# timer=<1|0>
#
# set this to 1 if you want hfcmulti to register at ztdummy (zaptel)
# and provide a 1khz timing source for it. This makes it possible
# to have an accurate timing source for asterisk through zaptel from
# hfcmulti to make applications like Meetme and faxing between wctdm
# and hfcmulti work properly.
#
poll=128
# dsp_poll=128
dsp_options=0
dtmfthreshold=100
debug=1Wir haben hier 3stellige Nebenstellen, deshalb hab ich dann auch "_*8XXX,..." verwendet. EXTEN:2 sollte ja gleich bleiben, oder hab ich das an dem Punkt falsch verstanden?
