Voip abgehend von W501V(ATA) via router und AP nicht möglich?

decache · 21 Okt 2007

Hallo,
folgende Problematik lässt mich nicht schlafen:
Abgehende Gespräche über Sipgate bringen immer ein Besetztton

Ankommenden Gespräche sind möglich

Folgende etwas ungewöhnliche Konstilation:

offiziellen Hotspot -> Buffalo Router (DD-WRT.com) -> Siemen Router (SE505) -> W501V (im ATA Mode)

Den W501V habe ich ATA fähig gemacht durch editieren der debug.cfg, etc ohne DNS Änderung vornzunehmen.
Internet läuft (auch Sipgate X-lite)!

Ich tippe mal auf Portfreigaben. Stell mich aber etwas ungeschickt mit den Portfreigaben an. Da ich nicht weis wo und wie und an welchen Gerät etwas zu ändern ist.

Ich habe auch schon versucht den W501 direkt zu dem Buffalo zu leiten, um nicht unnötig über den Siemens Router zu gehen. Jedoch leiter ohne erfolg. Er fand keine Verbindung.
Hier mal die IP Konstilation, falls da noch etwas nicht stimmt.
Bufallo: 192.168.1.1
Siemens: 192.168.2.1
W501V: 192.168.2.254

Die Console spuckt übrigens beim abgehenden Gespräch folgendesaus:

Code:

Sep  8 15:10:13 voipd[447]: is_register_allowed - running (voip=0)
Sep  8 15:10:13 voipd[447]: 0: no sync      vcc 1/32/PPPoE/32 stay online 0
Sep  8 15:10:22 voipd[447]: incoming(5:appl=5 plci=0x505 ncci=0x0 incoming): 11
10000 <- 0
Sep  8 15:10:22 voipd[447]: telapp_incoming - running (voip=0)
Sep  8 15:10:22 voipd[447]: 0: no sync      vcc 1/32/PPPoE/32 stay online 0
Sep  8 15:10:22 voipd[447]: CONNECT_RESP with cause value 0x34a6
Sep  8 15:10:24 voipd[447]: disconnected(appl=5 plci=0x505 ncci=0x0 incoming): remote: 0x3490 (0x0000) -

Bin für jede Idee Hilfreich.

Marsupilami · 22 Okt 2007

Welche Firmware ist denn überhaupt drauf auf dem Gerät?
Deine Ausgabe sieht mir nicht danach aus, dass das Gerät tatsächlich im ATA-Modus läuft!?
Konntest du STUN-Server eintragen?
Warum läuft der Siemens auch noch als Router mit eigenem Subnetz, warum lässt du den nicht einfach als reinen Switch/AccessPoint laufen?

decache schrieb:
Bin für jede Idee Hilfreich.

Cool! :rock:

decache · 22 Okt 2007

die 501er läuft mit 28.04.08
Nun ja ich gehe mal davon aus durch das umlenken des gw auf die 192.168.2.1 läuft die 501er als ATA, oder habe ich das falsch verstanden?

Nun gut ich wollte schon die 501er direkt an den Buffalo hängen, aber die 501 hat keine Verbindung bekommen. Hatte natürlich vor der das gw auf 192.168.1.1 gelenkt und ein IP der 501er gegeben (192.168.1.100)
Den STUN-Server habe ich in der voip.cfg eingetragen.Hat aber an der Tatsache nichts geändert.

heini66 · 22 Okt 2007

debug.cfg & ata :gruebel:
aus meiner anfangszeit ( fb_fon_wlan mir uralt firmware ) kommen mir da erinnerungen an modifikationen in der ar7.cfg, die nötig waren, wenn die firmware keine ata mode kannte.
ebenso könnte ein betrachten des webif's mit nem browser ohne css weiter helfen.

decache · 22 Okt 2007

art.cfg

achja
ich habe gleich mal einen schnellen Blick in die ar7.cfg geworfen, da finde ich ja auch die Portregeln:

Code:

                        forwardrules = "tcp 0.0.0.0:0 0.0.0.0:0 1 out",
                                       "udp 0.0.0.0:0 0.0.0.0:0 1 out",
                                       "udp 0.0.0.0:5060 0.0.0.0:5060",
                                       "udp 0.0.0.0:7078 0.0.0.0:7078",
                                       "udp 0.0.0.0:7079 0.0.0.0:7079",
                                       "udp 0.0.0.0:7080 0.0.0.0:7080",
                                       "udp 0.0.0.0:7081 0.0.0.0:7081",
                                       "udp 0.0.0.0:7082 0.0.0.0:7082",
                                       "udp 0.0.0.0:7083 0.0.0.0:7083",
                                       "udp 0.0.0.0:7084 0.0.0.0:7084",
                                       "udp 0.0.0.0:7085 0.0.0.0:7085",
                                       "udp 0.0.0.0:7086 0.0.0.0:7086",
                                       "udp 0.0.0.0:7087 0.0.0.0:7087",
                                       "udp 0.0.0.0:7089 0.0.0.0:7089",
                                       "udp 0.0.0.0:7090 0.0.0.0:7090",
                                       "udp 0.0.0.0:7091 0.0.0.0:7091",
                                       "udp 0.0.0.0:7092 0.0.0.0:7092",
                                       "udp 0.0.0.0:7093 0.0.0.0:7093",
                                       "udp 0.0.0.0:7094 0.0.0.0:7094",
                                       "udp 0.0.0.0:7095 0.0.0.0:7095",
                                       "udp 0.0.0.0:7096 0.0.0.0:7096",
                                       "udp 0.0.0.0:7097 0.0.0.0:7097";
                        shaper = "globalshaper";
                }
        }
        voip_routes = "permit ip any any connection exists",
                      "permit udp any eq 5060 any",
                      "permit udp any eq 7077 any eq 53",
                      "permit udp any range 7078 7097 any";

Sind die regeln so wie sie hier stehen für die sipgate POrts i.o?
Achtung, da ist aber noch der andere Router dazwischen, vielleicht hat das ja noch nen Einfluss?!
Wie gesagt, ankommen Rufe kommen durch, X-lite am Lapi geht auch!

heini66 · 22 Okt 2007

hier meine ar7.cfg aus ner 38 tcom formware mit ds-mod und ata patch.
damit geht voip als wlan repeater sowie in ata mode am lan anschluss.

Code:

 cat ar7.cfg
/*
 * /var/flash/ar7.cfg
 * Sat Jan  1 01:01:37 2000
 */

ar7cfg {
        mode = dsldmode_bridge;
        tsdisabled = no;
        igddenabled = yes;
        igdd_control_enabled = no;
        wan_bridge_with_dhcpc = no;
        wan_bridge_gateway = 192.168.0.1;
        dhcpc_use_static_dns = yes;
        ethmode = ethmode_bridge;
        StatisticStartOfMonth = 1;
        macdsl_override = 00:00:00:00:00:00;
        ethinterfaces {
                name = "eth0";
                dhcp = no;
                ipaddr = 192.168.0.10;
                netmask = 255.255.255.0;
                dstipaddr = 0.0.0.0;
                dhcpenabled = yes;
                dhcpstart = 0.0.0.0;
                dhcpend = 0.0.0.0;
        } {
                name = "eth0:0";
                dhcp = no;
                ipaddr = 192.168.178.254;
                netmask = 255.255.255.0;
                dstipaddr = 0.0.0.0;
                dhcpenabled = yes;
                dhcpstart = 0.0.0.0;
                dhcpend = 0.0.0.0;
        } {
                name = "eth1";
                dhcp = no;
                ipaddr = 192.168.181.1;
                netmask = 255.255.255.0;
                dstipaddr = 0.0.0.0;
                dhcpenabled = yes;
                dhcpstart = 0.0.0.0;
                dhcpend = 0.0.0.0;
        } {
                name = "usbrndis";
                dhcp = no;
                ipaddr = 192.168.179.1;
                netmask = 255.255.255.0;
                dstipaddr = 0.0.0.0;
                dhcpenabled = yes;
                dhcpstart = 0.0.0.0;
                dhcpend = 0.0.0.0;
        } {
                name = "wlan";
                dhcp = no;
                ipaddr = 192.168.182.1;
                netmask = 255.255.255.0;
                dstipaddr = 0.0.0.0;
                interfaces = "tiwlan0", "wdsup0", "wdsdw0", "wdsdw1", 
                             "wdsdw2", "wdsdw3";
                dhcpenabled = yes;
                dhcpstart = 0.0.0.0;
                dhcpend = 0.0.0.0;
        }
        brinterfaces {
                name = "lan";
                dhcp = no;
                ipaddr = 192.168.0.10;
                netmask = 255.255.255.0;
                dstipaddr = 0.0.0.0;
                interfaces = "eth0", "usbrndis", "eth1", "tiwlan0", "wdsup0", 
                             "wdsdw0", "wdsdw1", "wdsdw2", "wdsdw3";
                dhcpenabled = yes;
                dhcpstart = 0.0.0.0;
                dhcpend = 0.0.0.0;
        } {
                name = "lan:0";
                dhcp = no;
                ipaddr = 192.168.2.254;
                netmask = 255.255.255.0;
                dstipaddr = 0.0.0.0;
                dhcpenabled = yes;
                dhcpstart = 0.0.0.0;
                dhcpend = 0.0.0.0;
        }
        dslinterface {
                name = "dsl";
                dhcp = no;
                ipaddr = 192.168.179.1;
                netmask = 255.255.255.255;
                dstipaddr = 192.168.179.1;
                dhcpenabled = yes;
                dhcpstart = 0.0.0.0;
                dhcpend = 0.0.0.0;
        }
        dslinterface_metric = 2;
        ipbridge {
                enabled = no;
        }
        pppoefw {
                interfaces = "usbrndis", "eth0", "eth1", "tiwlan0", "wdsup0", 
                             "wdsdw0", "wdsdw1", "wdsdw2", "wdsdw3";
                nofirewall = yes;
                ipnetbiosfilter = yes;
                dnsfilter_for_active_directory = yes;
                hostuniq_filter = "";
                dpconfig {
                        security = dpsec_host;
                        lowinput {
                                policy = "reject";
                                accesslist = 
                                             "permit ip any any connection outgoing-related", 
                                             "permit ip any any connection incoming-related", 
                                             "permit icmp any any";
                        }
                        lowoutput {
                                policy = "permit";
                        }
                        highinput {
                                policy = "permit";
                        }
                        highoutput {
                                policy = "permit";
                                accesslist = 
                                             "reject ip any 242.0.0.0 255.0.0.0", 
                                             "deny ip any host 255.255.255.255", 
                                             "reject ip any 169.254.0.0 255.255.0.0", 
                                             "reject udp any any eq 135", 
                                             "reject tcp any any eq 135", 
                                             "reject udp any any range 137 139", 
                                             "reject tcp any any range 137 139", 
                                             "reject udp any any range 161 162", 
                                             "reject udp any any eq 520", 
                                             "reject udp any any eq 111", 
                                             "reject udp any any eq 22289", 
                                             "reject udp any any eq 1710", 
                                             "reject udp any any eq 1048", 
                                             "reject udp any any eq 158", 
                                             "reject udp any any eq 515", 
                                             "reject icmp any 149.1.1.0 255.255.255.0";
                        }
                        shaper = "globalshaper";
                }
        }
        budget {
                Enabled = no;
                Period = 2;
                VolumeLow = 0;
                VolumeHigh = 0;
                ConnectionTime = 0;
                WarnOnly = yes;
        }
        vccs {
                VPI = 1;
                VCI = 32;
                traffic_class = atm_traffic_class_UBR;
                pcr = 0;
                scr = 0;
                priority = 0;
                dsl_encap = dslencap_pppoe;
                ipbridgeing = no;
                pppoeforwarding = no;
                connections = "internet", "voip";
        }
        mcupstream = "internet";
        dslifaces {
                enabled = yes;
                name = "internet";
                dsl_encap = dslencap_inherit;
                dslinterfacename = "dsl";
                pppoevlanauto = no;
                pppoevlanauto_startwithvlan = no;
                ppptarget = "internet";
                etherencapcfg {
                        use_dhcp = yes;
                        ipaddr = 0.0.0.0;
                        netmask = 0.0.0.0;
                        gateway = 0.0.0.0;
                        dns1 = 0.0.0.0;
                        dns2 = 0.0.0.0;
                        mtu = 0;
                }
                is_mcupstream = yes;
                stay_always_online = no;
                only_route_when_connected = no;
                redial_delay_after_auth_failure = 1m;
                redial_limit = 3;
                redial_after_limit_reached = 1h;
                redial_after_limit_reached_variance = 30m;
                username_prefix_after_auth_failure = "";
                redial_delay_after_low_error = 10s;
                routes_only_for_local = no;
                dsldpconfig {
                        security = dpsec_firewall;
                        lowinput {
                                policy = "permit";
                                accesslist = 
                                             "deny ip any 242.0.0.0 255.0.0.0", 
                                             "deny ip any host 255.255.255.255", 
                                             "deny udp any any eq 135", 
                                             "deny tcp any any eq 135", 
                                             "deny udp any any range 137 139", 
                                             "deny tcp any any range 137 139", 
                                             "deny udp any any range 161 162", 
                                             "deny udp any any eq 520", 
                                             "deny udp any any eq 111", 
                                             "deny udp any any eq 22289", 
                                             "deny udp any any eq 1710", 
                                             "deny udp any any eq 1048", 
                                             "deny udp any any eq 158", 
                                             "deny udp any any eq 515";
                        }
                        lowoutput {
                                policy = "permit";
                        }
                        highinput {
                                policy = "permit";
                        }
                        highoutput {
                                policy = "permit";
                                accesslist = 
                                             "reject ip any 242.0.0.0 255.0.0.0", 
                                             "deny ip any host 255.255.255.255", 
                                             "reject ip any 169.254.0.0 255.255.0.0", 
                                             "reject udp any any eq 135", 
                                             "reject tcp any any eq 135", 
                                             "reject udp any any range 137 139", 
                                             "reject tcp any any range 137 139", 
                                             "reject udp any any range 161 162", 
                                             "reject udp any any eq 520", 
                                             "reject udp any any eq 111", 
                                             "reject udp any any eq 22289", 
                                             "reject udp any any eq 1710", 
                                             "reject udp any any eq 1048", 
                                             "reject udp any any eq 158", 
                                             "reject udp any any eq 515", 
                                             "reject icmp any 149.1.1.0 255.255.255.0";
                        }
                        forwardrules = "udp 0.0.0.0:5060 0.0.0.0:5060", 
                                       "udp 0.0.0.0:7078 0.0.0.0:7078", 
                                       "udp 0.0.0.0:7079 0.0.0.0:7079", 
                                       "udp 0.0.0.0:7080 0.0.0.0:7080", 
                                       "udp 0.0.0.0:7081 0.0.0.0:7081", 
                                       "udp 0.0.0.0:7082 0.0.0.0:7082", 
                                       "udp 0.0.0.0:7083 0.0.0.0:7083", 
                                       "udp 0.0.0.0:7084 0.0.0.0:7084", 
                                       "udp 0.0.0.0:7085 0.0.0.0:7085", 
                                       "udp 0.0.0.0:7086 0.0.0.0:7086", 
                                       "udp 0.0.0.0:7087 0.0.0.0:7087", 
                                       "udp 0.0.0.0:7089 0.0.0.0:7089", 
                                       "udp 0.0.0.0:7090 0.0.0.0:7090", 
                                       "udp 0.0.0.0:7091 0.0.0.0:7091", 
                                       "udp 0.0.0.0:7092 0.0.0.0:7092", 
                                       "udp 0.0.0.0:7093 0.0.0.0:7093", 
                                       "udp 0.0.0.0:7094 0.0.0.0:7094", 
                                       "udp 0.0.0.0:7095 0.0.0.0:7095", 
                                       "udp 0.0.0.0:7096 0.0.0.0:7096", 
                                       "udp 0.0.0.0:7097 0.0.0.0:7097", 
                                       "tcp 0.0.0.0:8089 0.0.0.0:8089";
                        shaper = "globalshaper";
                }
        } {
                enabled = yes;
                name = "voip";
                dsl_encap = dslencap_inherit;
                dslinterfacename = "dsl";
                pppoevlanauto = no;
                pppoevlanauto_startwithvlan = no;
                ppptarget = "voip";
                etherencapcfg {
                        use_dhcp = yes;
                        ipaddr = 0.0.0.0;
                        netmask = 0.0.0.0;
                        gateway = 0.0.0.0;
                        dns1 = 0.0.0.0;
                        dns2 = 0.0.0.0;
                        mtu = 0;
                }
                is_mcupstream = no;
                stay_always_online = yes;
                only_route_when_connected = no;
                redial_delay_after_auth_failure = 1m;
                redial_limit = 3;
                redial_after_limit_reached = 1h;
                redial_after_limit_reached_variance = 30m;
                username_prefix_after_auth_failure = "";
                redial_delay_after_low_error = 10s;
                routes_only_for_local = no;
                tcclassroutes = "sipdns", "sip", "rtp";
                dsldpconfig {
                        security = dpsec_firewall;
                        lowinput {
                                policy = "permit";
                                accesslist = "permit udp any any", 
                                             "permit icmp any any", 
                                             "deny ip any host 255.255.255.255", 
                                             "reject ip any any";
                        }
                        lowoutput {
                                policy = "permit";
                        }
                        highinput {
                                policy = "permit";
                        }
                        highoutput {
                                policy = "permit";
                                accesslist = "permit udp any any", 
                                             "reject ip any any";
                        }
                        forwardrules = "udp 0.0.0.0:5060 0.0.0.0:5060", 
                                       "udp 0.0.0.0:7078 0.0.0.0:7078", 
                                       "udp 0.0.0.0:7079 0.0.0.0:7079", 
                                       "udp 0.0.0.0:7080 0.0.0.0:7080", 
                                       "udp 0.0.0.0:7081 0.0.0.0:7081", 
                                       "udp 0.0.0.0:7082 0.0.0.0:7082", 
                                       "udp 0.0.0.0:7083 0.0.0.0:7083", 
                                       "udp 0.0.0.0:7084 0.0.0.0:7084", 
                                       "udp 0.0.0.0:7085 0.0.0.0:7085", 
                                       "udp 0.0.0.0:7086 0.0.0.0:7086", 
                                       "udp 0.0.0.0:7087 0.0.0.0:7087", 
                                       "udp 0.0.0.0:7089 0.0.0.0:7089", 
                                       "udp 0.0.0.0:7090 0.0.0.0:7090", 
                                       "udp 0.0.0.0:7091 0.0.0.0:7091", 
                                       "udp 0.0.0.0:7092 0.0.0.0:7092", 
                                       "udp 0.0.0.0:7093 0.0.0.0:7093", 
                                       "udp 0.0.0.0:7094 0.0.0.0:7094", 
                                       "udp 0.0.0.0:7095 0.0.0.0:7095", 
                                       "udp 0.0.0.0:7096 0.0.0.0:7096", 
                                       "udp 0.0.0.0:7097 0.0.0.0:7097";
                        shaper = "globalshaper";
                }
        }
        targets {
                type = pppcfg_target_internet;
                name = "internet";
                only_crypt_auth = no;
                local {
                        username = "";
                        passwd = "";
                }
                remoteauth = pppcfg_authtype_chap;
                remoteauth_only_on_incoming = yes;
                remote {
                }
                inactivity_timeout = 5m;
                bUseChargeInterval = no;
                nChargeInterval = 1m;
                logicaldisconnect_with_physical = yes;
                disconnect_timeout = 0w;
                finaldisconnectcall = no;
                ipnetbiosspoofing = no;
                ipnetbiosfilter = yes;
                dnsfilter_for_active_directory = no;
                no_outgoing_calls = no;
                coso = pppcfg_coso_caller;
                callback_delay = 1s;
                icbmode = pppcfg_icbmode_none;
                ocbmode = pppcfg_ocbmode_none;
                mscbprefered = no;
                multilink {
                        extra_static_channels = 0;
                        max_channels = 1;
                        automatic = no;
                        automatic_param {
                                window = 20s;
                                add_percent = 85;
                                drop_percent = 70;
                                sportlich = no;
                        }
                }
                header_compression = yes;
                data_compression = pppcfg_datacomp_auto;
                stac_reset_with_history_number = no;
                encryption = pppcfg_crypt_none;
                inactivity_prevention_interval = 0w;
                new_ipaddr_on_connect = no;
                my_ipaddr = 0.0.0.0;
                his_ipaddr = 0.0.0.0;
                overwrite_dns1 = 192.168.0.1;
                overwrite_dns2 = 0.0.0.0;
                bVolumeRoundUp = no;
                VolumeRoundUpBytes = 0;
                bProviderDisconnectPrevention = yes;
                ProviderDisconnectPreventionInterval = 1d;
                ProviderDisconnectPreventionHour = 1;
                bProviderDisconnectPreventionHourSet = yes;
                passiv_on_outgoing = no;
        } {
                type = pppcfg_target_internet;
                name = "voip";
                only_crypt_auth = no;
                local {
                        username = "";
                        passwd = "";
                }
                remoteauth = pppcfg_authtype_chap;
                remoteauth_only_on_incoming = yes;
                remote {
                }
                inactivity_timeout = 0w;
                bUseChargeInterval = no;
                nChargeInterval = 1m;
                logicaldisconnect_with_physical = yes;
                disconnect_timeout = 0w;
                finaldisconnectcall = no;
                ipnetbiosspoofing = no;
                ipnetbiosfilter = yes;
                dnsfilter_for_active_directory = no;
                no_outgoing_calls = no;
                coso = pppcfg_coso_caller;
                callback_delay = 1s;
                icbmode = pppcfg_icbmode_none;
                ocbmode = pppcfg_ocbmode_none;
                mscbprefered = no;
                multilink {
                        extra_static_channels = 0;
                        max_channels = 1;
                        automatic = no;
                        automatic_param {
                                window = 20s;
                                add_percent = 85;
                                drop_percent = 70;
                                sportlich = no;
                        }
                }
                header_compression = yes;
                data_compression = pppcfg_datacomp_auto;
                stac_reset_with_history_number = no;
                encryption = pppcfg_crypt_none;
                inactivity_prevention_interval = 0w;
                new_ipaddr_on_connect = no;
                my_ipaddr = 0.0.0.0;
                his_ipaddr = 0.0.0.0;
                overwrite_dns1 = 0.0.0.0;
                overwrite_dns2 = 0.0.0.0;
                bVolumeRoundUp = no;
                VolumeRoundUpBytes = 0;
                bProviderDisconnectPrevention = yes;
                ProviderDisconnectPreventionInterval = 1d;
                ProviderDisconnectPreventionHour = 1;
                bProviderDisconnectPreventionHourSet = yes;
                passiv_on_outgoing = no;
        }
        dslglobalconfig {
                autodetect = no;
                pppoeiface = "eth0";
                speed_in_netto = 6000;
                speed_out_netto = 600;
                manual_speed = no;
                connect_delay_when_synced = 10s;
                default_tcom_vlan = 7;
                templates {
                        VPI = 1;
                        VCI = 32;
                        manu = 0;
                        encap = dslencap_pppoe;
                }
        }
        shapers {
                name = "globalshaper";
                OutFragmentWhenVoIP = 0;
                shaperconnection {
                        enabled = yes;
                        targets = "";
                        name = "Fritz!Box";
                        limiters {
                                name = "default-out";
                                bps_limit {
                                        limit_total = 100;
                                        limit_p0 = 0;
                                        limit_p1 = 95;
                                        limit_p2 = 95;
                                        limit_p3 = 0;
                                }
                                pps_limit {
                                        limit_total = 0;
                                        limit_p0 = 0;
                                        limit_p1 = 0;
                                        limit_p2 = 0;
                                        limit_p3 = 0;
                                }
                                min_priority = 0;
                                max_priority = 3;
                                grouping_by_source_ip = no;
                                grouping_by_dest_ip = no;
                                grouping_by_source_port = no;
                                grouping_by_dest_port = no;
                                dynamic_balancing = no;
                                bps_child_limit {
                                        limit_total = 0;
                                        limit_p0 = 0;
                                        limit_p1 = 0;
                                        limit_p2 = 0;
                                        limit_p3 = 0;
                                }
                                pps_child_limit {
                                        limit_total = 0;
                                        limit_p0 = 0;
                                        limit_p1 = 0;
                                        limit_p2 = 0;
                                        limit_p3 = 0;
                                }
                                shapeOutgoingOnIncomingCounters = no;
                        } {
                                name = "default-in";
                                bps_limit {
                                        limit_total = 0;
                                        limit_p0 = 0;
                                        limit_p1 = 0;
                                        limit_p2 = 0;
                                        limit_p3 = 0;
                                }
                                pps_limit {
                                        limit_total = 0;
                                        limit_p0 = 0;
                                        limit_p1 = 0;
                                        limit_p2 = 0;
                                        limit_p3 = 0;
                                }
                                min_priority = 0;
                                max_priority = 0;
                                grouping_by_source_ip = no;
                                grouping_by_dest_ip = no;
                                grouping_by_source_port = no;
                                grouping_by_dest_port = no;
                                dynamic_balancing = no;
                                bps_child_limit {
                                        limit_total = 0;
                                        limit_p0 = 0;
                                        limit_p1 = 0;
                                        limit_p2 = 0;
                                        limit_p3 = 0;
                                }
                                pps_child_limit {
                                        limit_total = 0;
                                        limit_p0 = 0;
                                        limit_p1 = 0;
                                        limit_p2 = 0;
                                        limit_p3 = 0;
                                }
                                shapeOutgoingOnIncomingCounters = no;
                        }
                        out_rules {
                                name = "fon-rtp";
                                filter = "tc:rtp,sip";
                                priority = 3;
                                limiters = "default-out";
                        } {
                                name = "download-tcp-ack";
                                filter = "tc:tcp_ack";
                                priority = 2;
                                limiters = "default-out";
                        } {
                                name = "dns";
                                filter = "tc:dns,sipdns,ntpdns,tr069dns";
                                priority = 1;
                                limiters = "default-out";
                        } {
                                name = "http-requests";
                                filter = "tc:http_req,tr069";
                                priority = 1;
                                limiters = "default-out";
                        } {
                                name = "pri-out";
                                filter = "tc:icmp";
                                priority = 1;
                                limiters = "default-out";
                        } {
                                name = "default";
                                filter = "";
                                priority = 0;
                                limiters = "default-out";
                        }
                        in_rules {
                                name = "default";
                                filter = "";
                                priority = 0;
                                limiters = "default-in";
                        }
                        demasquerade = no;
                }
        }
        RunVoIPDSLAutodetect = 0;
        saved_non_ata_ip_config {
                ipaddr = 192.168.2.1;
                netmask = 255.255.255.0;
                dns1 = 192.168.180.1;
                dns2 = 192.168.180.2;
                overwrite_dns1 = 0.0.0.0;
                overwrite_dns2 = 0.0.0.0;
        }
}


servercfg {
        hostname = "(none)";
        dns1 = 192.168.0.1;
        dns2 = 192.168.180.1;
}


websrv {
        port = "80";
        read_timeout = 15m;
        request_timeout = 30s;
        keepalive_timeout = 5m;
        nokeepalive = "*";
        errordir = "/usr/lib/websrv/errors";
        webdir = "/usr/www";
        cgidir = "cgi-bin";
        indexfn = "index.var", "index.htm", "index.html";
        url_redirects {
                from_url = "/top_budget.htm";
                to_url = "/cgi-bin/webcm?getpage=../html/top_budget.html";
        } {
                from_url = "/top_freischalten.htm";
                to_url = "/cgi-bin/webcm?getpage=../html/top_freischalten.html";
        } {
                from_url = "/top_sperren.htm";
                to_url = "/cgi-bin/webcm?getpage=../html/top_sperren.html";
        } {
                from_url = "/index.htm";
                to_url = "/index.html";
        } {
                from_url = "/cgi-bin/disconnect.exe";
                to_url = "/cgi-bin/webcm?connection0:settings/cmd_disconnect=1";
        } {
                from_url = "/cgi-bin/connect.exe";
                to_url = "/cgi-bin/webcm?connection0:settings/cmd_connect=1";
        } {
                from_url = "/hcti_status_ocontrol.htm";
                to_url = "/cgi-bin/webcm?getpage=../html/hcti_status_ocontrol.html";
        }
}


dhcpserver {
        saveinterval = 1h;
        generic {
                default_lease_time = 10d;
                max_lease_time = 13d;
        }
}


dhcpclient {
        metric = 9;
}


dnsserver {
        cache_maxKB = 16;
        negative_ttl = 5m;
}


ddns {
        accounts {
                enabled = no;
                domain = "";
                iface = 0;
                username = "";
                passwd = "";
                ddnsprovider = "dyndns.org";
        }
        types {
                type = "dyndns";
                url = "/nic/update?system=dyndns&hostname=<domain>&myip=<ipaddr>&wildcard=NOCHG";
        } {
                type = "dyndns-custom";
                url = "/nic/update?system=custom&hostname=<domain>&myip=<ipaddr>&wildcard=NOCHG";
        } {
                type = "dyndns-statdns";
                url = "/nic/update?system=statdns&hostname=<domain>&myip=<ipaddr>&wildcard=NOCHG";
        } {
                type = "noip";
                url = "/ducupdate.php?update=<b64>username=<username>&pass=<pass>&h[]=<domain>&ip=<ipaddr></b64>";
        } {
                type = "2mydns";
                url = "/dyn.asp?username=<username>&password=<pass>&hostname=<domain>&myip=<ipaddr>";
        } {
                type = "dns4biz";
                url = "/nic/update?hostname=<domain>&myip=<ipaddr>";
        } {
                type = "selfhost";
                url = "/nic/update?myip=<ipaddr>&host=<domain>&textmodi=1&http_status=1";
        } {
                type = "userdefined";
                url = "";
        } {
                type = "strato";
                url = "/nic/update?hostname=<domain>";
        }
        provider {
                name = "dyndns.org";
                type = "dyndns";
                livedelay = 0w;
                touchtime = 30d;
                server = "members.dyndns.org";
                infourl = "http://www.dyndns.org/";
        } {
                name = "dyndns.org-custom";
                type = "dyndns-custom";
                livedelay = 0w;
                touchtime = 30d;
                server = "members.dyndns.org";
                infourl = "http://www.dyndns.org/";
        } {
                name = "dyndns.org-statdns";
                type = "dyndns-statdns";
                livedelay = 0w;
                touchtime = 30d;
                server = "members.dyndns.org";
                infourl = "http://www.dyndns.org/";
        } {
                name = "No-IP.com";
                type = "noip";
                livedelay = 4m;
                touchtime = 0w;
                server = "dynupdate.no-ip.com:8245";
                infourl = "http://www.no-ip.com/";
        } {
                name = "2myDNS";
                type = "2mydns";
                livedelay = 0w;
                touchtime = 0w;
                server = "dyn.2mydns.com";
                infourl = "http://www.2mydns.com/";
        } {
                name = "DNS4BIZ.DE Premium";
                type = "dns4biz";
                livedelay = 0w;
                touchtime = 0w;
                server = "au-eu.dns4biz.net";
                infourl = "http://www.dns4biz.com/services_avm.php3";
        } {
                name = "DNS4BIZ.DE Business";
                type = "dns4biz";
                livedelay = 0w;
                touchtime = 0w;
                server = "au-eu.dns4biz.biz";
                infourl = "http://www.dns4biz.com/services_avm.php3";
        } {
                name = "selfhost.de";
                type = "selfhost";
                livedelay = 0w;
                touchtime = 0w;
                server = "carol.selfhost.de";
                infourl = "http://www.selfhost.de";
        } {
                name = "Benutzerdefiniert";
                type = "userdefined";
                livedelay = 4m;
                touchtime = 0w;
                server = "";
                infourl = "http://";
        } {
                name = "STRATO AG";
                type = "strato";
                livedelay = 4m;
                touchtime = 0w;
                server = "dyndns.strato.com";
                infourl = "http://www.strato.de/webhosting/index.html";
        }
}


webui {
        username = "";
        password = "$$$$";
        expertmode = yes;
        wizard_completed = no;
        event_filter = 3;
}


capiovertcp {
        enabled = no;
        maxctrl = 1;
        port = 5031;
}


emailnotify {
        enabled = no;
        interval = daily;
        From = "";
        To = "";
        SMTPServer = "";
        accountname = "";
        passwd = "";
        show_eventlist = no;
        show_voipstat = no;
}


usbhost {
        readonly = no;
        password = "";
        autoprov_enabled = yes;
        ftp_internet_enabled = no;
        aura_config = 0;
        ftp_server_enabled = yes;
        samba_server_enabled = yes;
}


night_time_control {
        enabled = no;
        time_on = "";
        time_off = "";
        ring_blocked = no;
}


ntpclient {
        server_list = "0.europe.pool.ntp.org";
}


led {
        infoled_reason = 0;
}


timezone_manual {
        enabled = no;
        offset = 0;
        dst_enabled = no;
        TZ_string = "";
}


mrouter {
        igmp_version_for_upstream = 3;
        igmp_version_for_other = 3;
        igmp_prio = 48;
}


rip {
}


cpu_schedule {
        dsl_token = 5000;
        lan_token = 20000;
}


media {
        enabled = yes;
        max_entries = 5000;
}


TR_064 {
        enabled = no;
        username = "";
        password = "";
        persistent_data = "";
}


landevices {
}


qos {
        always_set_tos = no;
        rules {
                tcclass = "sip";
                rules = "udp.dport 5060";
        } {
                tcclass = "dns";
                rules = "udp.dport 53";
        } {
                tcclass = "http_req";
                rules = "tcp.dport 80 ip.len <= 800", 
                        "tcp.dport 8080 ip.len <= 800", 
                        "tcp.dport 3128 ip.len <= 800";
        } {
                tcclass = "tcp_ack";
                rules = "ip.proto == tcp ip.len <= 64";
        } {
                tcclass = "icmp";
                rules = "ip.proto == icmp";
        }
}


ethernet_eco {
        eth0_mode = 2;
        eth1_mode = 1;
        eth2_mode = 1;
        eth3_mode = 1;
}


// EOF

decache · 23 Okt 2007

hey besten dank. Ich werde es gleich mal probieren, ob sich dann etwas tut.
Kann ich den Code so in die ar7 pipen oder sollte ich lieber erstmal die Kiste auf ne 38 Firmeware bringen. Nicht das es da in kombatibilitäten gibt!? Wäre dabei etwas zu beachten, wenn man schon in den "innereien" editiert hat?

Wie sieht den bei dir die debug.cfg aus? Leitest du auch das gate way auf einen bestimmten Router oder passiert das in der ar7?
Was müsste ich an dem Siemens Router einstellen, das er sich als IP-Client verhält? DHCP auschalten und eine IP aus dem SUB Netz des 1. Routers (Buffalo) vergeben?
:idea:

heini66 · 23 Okt 2007

für die ar7.cfg unbendingt auf 38 firmware uppen.
editor für die ar7.cfg ist nvi.
fehler in der ar7.cfg machen die box fix zum briefbeschwerer.

debug.cfg ist bei mir komplett leer.
ich verwende eine ata-mode gepatchte firmware. ( ds-mod mit ata-patch )
in der 15.2 ist das webif aber noch arg bugy, wird mit 15.3 gefixt.

Languages

Suche

Languages

Suche

Voip abgehend von W501V(ATA) via router und AP nicht möglich?

decache

Neuer User

Marsupilami

IPPF-Promi

decache

Neuer User

heini66

Gesperrt

decache

Neuer User

heini66

Gesperrt

decache

Neuer User

heini66

Gesperrt

Zurzeit aktive Teammitglieder

Zurzeit aktive Besucher

Neueste Beiträge

Statistik des Forums