OpenCom510 <-> OpenCom150

[vriesge]

Hi,

First of all, excuse me while speaking English. I am from the Netherlands and don't speak any german.

This is my problem..,
At our headoffice, we have an Opencom510 with voip gateway card installed.

We want to open a second office, and link to our HO with two Q.SIG Openline IP licenses. For internal calling this seems perfectly compatible.

Does anyone know if i can route all outgoing phonecalls from the second office through the HO's fixed lines ?
(e.g. so we don't need any phonelines at the second office ?)

Thanks for any help!

 

[maglore]

You had a Headoffice and two HO`s ?

What`s your Hardware in the Ho`s ?

 

[vriesge]

You had a Headoffice and two HO`s ?

What`s your Hardware in the Ho`s ?

We have two HO's.

Hardware in HO1
- OpenCom510
- IP Gateway card
- about 70 extentions
- S2M to dial to the world

Hardware in HO2:
- OpenCom 150
- IP Gateway card
- about 25 extentions

We want to link HO2 to HO1. This should be possible for internal calling. (with two OpenLine Q.SIG IP licenses at both ends)

I want to know (when having such a link) if i can route all external calls from HO2 (to the world) through the S2M at HO1.

Hope this helps!

 

[k3com]

it should be possible

you will have to establish the qsig connection and then change the route of the pbx at ho2 for 0 to the qsig connection.
on pbx in ho1 you setup the bundle to handle the calls as external

that should be it

i never used qsig over ip, but it should work like this using a normal isdn-connection. qsig over ip should behave similar