Neue Probleme mit Chan-SCCP-3.0_RC2 (gelöst)

mschatz · 30 Aug 2010

Hallo an die Chan_SCCP Entwickler!

Mit dem neuem RC2 treten bei mir folgende Probleme auf:

1. Alle ausgehenden Anrufe werden im Display mit "To Unknown Number" angezeigt.
2. Bei eingehenden Anrufen wird der gesetzte CallerId(name) nicht mehr angezeigt.

Server: Asterisk 1.6.2.10
Telefone: 7970 Firmware 8.3.1

Danke und beste Grüße,

Markus

mschatz · 30 Aug 2010

Hier man ein Auszug aus meiner sccp.conf:

Code:

[general]
keepalive = 30
context = default
dateFormat = D.M.Y
bindaddr = 178.77.72.XXX
port = 2000
disallow = all
allow = alaw
allow = ulaw
allow = g729
firstdigittimeout = 16
digittimeout = 8
digittimeoutchar = #
echocancel = on

[SEP001BD40B5XXX]
type = device
devicetype = 7970
description = Markus
button = line, 02514193XXX
button = line, 02517129XXX

[02514193XXX]
type = line
cid_num = 02514193XXX
label = 02514193XXX

[02517129XXX]
type = line
cid_num = 02517129XXX
label = 02517129XXX

Und hier noch ein Log aus der CLI bei ankommenden Anrufen:

Code:

-- SCCP: Asterisk asked to create a channel type=SCCP, format=4, line=02514193XXX, subscriptionId.number=, options=ringer=inside
[Aug 30 15:46:27] NOTICE[30011]: chan_sccp.c:218 sccp_request: : calling all subscribers
 [SCCP] in file chan_sccp.c, line 265 (sccp_request)
    -- : Asterisk request to call SCCP/02514193XXX-00000007
    -- SEP001BD40B5XXX: send callInfo of callid 7
 00000000 - 01 00 00 00 07 00 00 00 01 00 00 00 00 00 00 00 ................
 00000010 - 00 00 00 00 01 00 00 00 01 00 00 00 00 00 00 00 ................
 00000020 - 30 31 37 31 33 34 37 36 33 34 30 00 00 30 32 35 01713476XXX..025
 00000030 - 31 34 31 39 33 34 37 30 00 00 00 00 00 00 00 4D 14193XXX.......M
 00000040 - 61 72 6B 75 73 20 53 63 68 61 74 7A 20 28 4D 6F arkus Handy.....
 00000050 - 62 69 6C 65 29 00 00 00 00 00 00 00             ..........
> notify asterisk to set state to sccp channelstate RINGING (4) => asterisk: Device is ringing (6) on channel SCCP/02514193XXX

chaos2000 · 30 Aug 2010

welche protocolversion ist gesetzt?
sccp show device SEP001BD40B5XXX

mschatz · 30 Aug 2010

Folgende Device Infos sind gesetzt:

Code:

MAC-Address        : SEP001BD40B5XXX
Protocol Version   : Supported '12', In Use '12'
Keepalive          : 30
Registration state : OK(3)
State              : On Hook(0)
MWI handset light  : OFF
Description        : Markus
Config Phone Type  : 7970
Skinny Phone Type  : Cisco 7970(30006)
Softkey support    : Yes
Image Version      :
Timezone Offset    : 0
Capabilities       : 0x10c (ulaw|alaw|g729)
Codecs preference  : (alaw|ulaw|g729)
DND Feature enabled: YES
DND Status         : Disabled
Can Transfer       : Yes
Can Park           : Yes
Private softkey    : Enabled
Can CFWDALL        : No
Can CFWBUSY        : No
Can CFWNOANSWER    : No
Dtmf mode          : In-Band
Nat                : No
Videosupport?      : No
Direct RTP         : No
Trust phone ip     : No
Early RTP          : No
Device State (Acc.): On Hook
Last Used Accessory: Handset
Last dialed number : 0251690XXX

chaos2000 · 30 Aug 2010

ok, ich kümmere mich

chaos2000 · 30 Aug 2010

ok, das liegt an der protocolversion.

kannst du in src/sccp_channel.c mal noch folgenden Zeilen suchen:

Code:

if (device->inuseprotocolversion < 12) {
		usableFields = 12;

und wie folgt ändern:

Code:

if (device->inuseprotocolversion < 15) {
		usableFields = 12;

Kannst du mir bescheid geben ob das passt?

mschatz · 30 Aug 2010

Aber hallo, das hat geklappt.

Klingt logisch, das 7970 wird mit Protokollversion 12 angesprochen, die if-Abfrage hat aber nur für alle Versionen < 12 gegriffen.

Allerdings fragt das Telefon beim Anmelden an den Server auch nach Version 17, bekommt aber nur 12. Ist das so gewollt?

Danke und Gruß,

Markus

chaos2000 · 31 Aug 2010

Dann hast du in deiner sccp.conf nur die 12 erlaubt

mschatz · 31 Aug 2010

Nee in der sccp.conf habe ich gar nichts dergleichen erlaubt oder verboten, die Config hatte ich ja oben schon gepostet. Oder habe ich dort noch Fehler drin oder fehlen irgendwelche benötigten Angaben?

Ich habe nämlich gerade auch noch festgestellt dass ich teilweise keine Klingelzeichen mehr höre wenn ich jemanden anrufe. Liegt das auch an der falschen Protokollversion?

chaos2000 · 31 Aug 2010

schick mir mal bitte die ausgabe der cli wenn sich das device registriert
sccp debug core device

P.S.: default context, bist du dir da sicher?

mschatz · 31 Aug 2010

Ja der default context reicht für mich, in meiner extensions.conf steht nicht viel drin. Das passt auch alles.

Code:

    -- SCCP: Accepted connection from 77.177.242.XXX
    -- SCCP: Using ip 178.77.72.XXX
    -- SCCP: Alarm Message: Severity: Informational (2), 20: Name=SEP001BD40B5XXX Load= SCCP70.8-3-1S Last=Phone-Keypad [0/0]
 SEP001BD40B5XXX: is registering, Instance: 0, Type: Cisco 7970 (30006), Version: 12
    -- SEP001BD40B5XXX: Allocating device to session (23) 77.177.242.XXX
    -- SEP001BD40B5XXX: Ask the phone to send keepalive message every 24 seconds
 00000000 - 53 45 50 30 30 31 42 44 34 30 42 35 41 39 35 00 SEP001BD40B5XXX.
 00000010 - 00 00 00 00 00 00 00 00 0A 00 00 05 36 75 00 00 ............6u..
 00000020 - 05 00 00 00 00 00 00 00 0C 00 70 85 01 00 00 00 ..........p.....
 00000030 - 00 00 00 00 00 00 00 00                         ........
    -- SEP001BD40B5XXX: asked our protocol capability (17). We answered (12).
    -- SEP001BD40B5XXX: Building button template Cisco 7970(30006), user config 7970
    -- SEP001BD40B5XXX: >> Send message Button Template Message
    -- SEP001BD40B5XXX: Button(0)[ 1] = Redial
    -- SEP001BD40B5XXX: Button(1)[ 2] = NewCall
    -- SEP001BD40B5XXX: Button(2)[ 3] = Hold
    -- SEP001BD40B5XXX: Button(3)[ 4] = Transfer
    -- SEP001BD40B5XXX: Button(4)[ 5] = CFwdALL
    -- SEP001BD40B5XXX: Button(5)[ 6] = CFwdBusy
    -- SEP001BD40B5XXX: Button(6)[ 7] = CFwdNoAnswer
    -- SEP001BD40B5XXX: Button(7)[ 8] = &lt;&lt;
    -- SEP001BD40B5XXX: Button(8)[ 9] = EndCall
    -- SEP001BD40B5XXX: Button(9)[10] = Resume
    -- SEP001BD40B5XXX: Button(10)[11] = Answer
    -- SEP001BD40B5XXX: Button(11)[12] = Info
    -- SEP001BD40B5XXX: Button(12)[13] = Confrn
    -- SEP001BD40B5XXX: Button(13)[14] = Park
    -- SEP001BD40B5XXX: Button(14)[15] = Join
    -- SEP001BD40B5XXX: Button(15)[16] = MeetMe
    -- SEP001BD40B5XXX: Button(16)[17] = PickUp
    -- SEP001BD40B5XXX: Button(17)[18] = GPickUp
    -- SEP001BD40B5XXX: Button(18)[19] = RmLstC
    -- SEP001BD40B5XXX: Button(19)[20] = CallBack
    -- SEP001BD40B5XXX: Button(20)[21] = Barge
    -- SEP001BD40B5XXX: Button(21)[22] = DND
    -- SEP001BD40B5XXX: Button(22)[23] = No Park Number Available
    -- SEP001BD40B5XXX: Button(23)[24] = CallPark Reversion
    -- SEP001BD40B5XXX: Button(24)[25] = Service is not Active
    -- SEP001BD40B5XXX: Button(25)[26] = Empty
    -- SEP001BD40B5XXX: Button(26)[27] = ConfList
    -- SEP001BD40B5XXX: Button(27)[28] = Select
    -- SEP001BD40B5XXX: Button(28)[29] = Private
    -- SEP001BD40B5XXX: Button(29)[30] = TrnsfVM
    -- SEP001BD40B5XXX: Button(30)[31] = DirTrfr
    -- SEP001BD40B5XXX: Button(31)[32] = iDivert
    -- SEP001BD40B5XXX: >> Send message SoftKey Template Response
    -- SEP001BD40B5XXX: softkey count: 11
    -- SEP001BD40B5XXX: TRANSFER        is enabled
    -- SEP001BD40B5XXX: DND             is disabled
    -- SEP001BD40B5XXX: PRIVATE         is enabled
    -- SEP001BD40B5XXX: PARK            is  enabled
    -- SEP001BD40B5XXX: CFWDALL         is  disabled
    -- SEP001BD40B5XXX: CFWDBUSY        is  disabled
    -- SEP001BD40B5XXX: CFWDNOANSWER    is  disabled
    -- SEP001BD40B5XXX: TRNSFVM/IDIVERT is  disabled
    -- SEP001BD40B5XXX: MEETME          is  disabled
    -- SEP001BD40B5XXX: PICKUPGROUP     is  disabled
    -- SEP001BD40B5XXX: PICKUPEXTEN     is  disabled
    -- SEP001BD40B5XXX: Set[0 ]= 0 :Redial     1 :NewCall    5 :DND
    -- SEP001BD40B5XXX: Set[1 ]= 0 :Hold       1 :EndCall    2 :Park       3 :Select
    -- SEP001BD40B5XXX: Set[2 ]= 0 :Resume     1 :NewCall    2 :EndCall    3 :Transfer   4 :Select     5 :DirTrfr
    -- SEP001BD40B5XXX: Set[3 ]= 0 :Answer     1 :EndCall
    -- SEP001BD40B5XXX: Set[4 ]= 0 :Redial     1 :EndCall    2 :Private
    -- SEP001BD40B5XXX: Set[5 ]= 0 :Hold       1 :EndCall    2 :Transfer   3 :Park       4 :Select     5 :DirTrfr
    -- SEP001BD40B5XXX: Set[6 ]= 0 :&lt;&lt;   1 :EndCall
    -- SEP001BD40B5XXX: Set[7 ]= 0 :Hold       1 :EndCall
    -- SEP001BD40B5XXX: Set[8 ]= 0 :EndCall    1 :Transfer
    -- SEP001BD40B5XXX: Set[9 ]= 0 :Redial     1 :EndCall
    -- SEP001BD40B5XXX: Set[10]= 0 :NewCall
    -- There are 11 SoftKeySets.
    -- SEP001BD40B5XXX: >> Send message SoftKey Set Response
    -- SEP001BD40B5XXX: Send softkeyset to On Hook(0) on line 0  and call 0
    -- SEP001BD40B5XXX: >> Send message Select SoftKeys Message
    -- SEP001BD40B5XXX: >> Send message Config State Message
    -- SEP001BD40B5XXX: Sending ConfigStatMessage, lines 2, speeddials 0
    -- SEP001BD40B5XXX: Device has 8 Capabilities
    -- SEP001BD40B5XXX: SCCP:    25 Wideband 256k             AST:     0 unknown
    -- SEP001BD40B5XXX: SCCP:     4 G.711 u-law 64k           AST:     4 G.711 u-law
    -- SEP001BD40B5XXX: SCCP:     2 G.711 A-law 64k           AST:     8 G.711 A-law
    -- SEP001BD40B5XXX: SCCP:    15 G.729 Annex B             AST:     0 unknown
    -- SEP001BD40B5XXX: SCCP:    16 G.729 Annex A + B         AST:     0 unknown
    -- SEP001BD40B5XXX: SCCP:    11 G.729                     AST:     0 unknown
    -- SEP001BD40B5XXX: SCCP:    12 G.729 Annex A             AST:   256 G.729A
    -- SEP001BD40B5XXX: SCCP:     1 Non-standard codec        AST:     0 unknown
    -- SEP001BD40B5XXX: Accessory 'Headset' is 'On Hook' (0)
    -- SEP001BD40B5XXX: Accessory 'Handset' is 'On Hook' (0)
    -- SEP001BD40B5XXX: Looking for line with instance 1.
    -- SEP001BD40B5XXX: button instance 1, type: 0
    -- SCCP: Found line 02514193XXX
    -- SEP001BD40B5XXX: >> Send message Line State Message
    -- SEP001BD40B5XXX: Send Forward Status.  Line: 02514193XXX
    -- SEP001BD40B5XXX: >> Send message Forward State Message
    -- SEP001BD40B5XXX: Got Forward Status Request.  Line: 1
    -- SEP001BD40B5XXX: Looking for line with instance 1.
    -- SEP001BD40B5XXX: button instance 1, type: 0
    -- SCCP: Found line 02514193XXX
    -- SEP001BD40B5XXX: Send Forward Status.  Line: 02514193XXX
    -- SEP001BD40B5XXX: >> Send message Forward State Message
    -- SEP001BD40B5XXX: Looking for line with instance 2.
    -- SEP001BD40B5XXX: button instance 1, type: 0
    -- SEP001BD40B5XXX: button instance 2, type: 0
    -- SCCP: Found line 02517129XXX
    -- SEP001BD40B5XXX: >> Send message Line State Message
    -- SEP001BD40B5XXX: Send Forward Status.  Line: 02517129XXX
    -- SEP001BD40B5XXX: >> Send message Forward State Message
    -- SEP001BD40B5XXX: Got Forward Status Request.  Line: 2
    -- SEP001BD40B5XXX: Looking for line with instance 2.
    -- SEP001BD40B5XXX: button instance 1, type: 0
    -- SEP001BD40B5XXX: button instance 2, type: 0
    -- SCCP: Found line 02517129XXX
    -- SEP001BD40B5XXX: Send Forward Status.  Line: 02517129XXX
    -- SEP001BD40B5XXX: >> Send message Forward State Message
    -- SEP001BD40B5XXX: >> Send message Define Time Date
    -- SEP001BD40B5XXX: Send date/time
    -- SEP001BD40B5XXX: >> Send message Set Lamp Message
    -- SEP001BD40B5XXX: >> Send message Display Notify Message
    -- SEP001BD40B5XXX: Display notify with timeout 5
    -- SEP001BD40B5XXX: >> Send message Clear Prompt Status Message
    -- SEP001BD40B5XXX: Clear the status prompt on line 0 and callid 0
    -- SEP001BD40B5XXX: >> Send message Display Dynamic Prompt Status Message
    -- SEP001BD40B5XXX: Display prompt on line 0, callid 0, timeout 0
    -- SEP001BD40B5XXX: Send softkeyset to On Hook(0) on line 0  and call 0
    -- SEP001BD40B5XXX: >> Send message Select SoftKeys Message
    -- SEP001BD40B5XXX: Post registration process... done!
    -- SEP001BD40B5XXX: Phone available lines 2
    -- SEP001BD40B5XXX: Attaching line 02514193XXX with instance 1 to this device
    -- SEP001BD40B5XXX: sccp_device_find_index_for_line searching for 02514193XXX
    -- SEP001BD40B5XXX: sccp_device_find_index_for_line found: 1
    -- SEP001BD40B5XXX: sccp_device_find_index_for_line return: 1
       > notify asterisk to set state to sccp channelstate DOWN (0) => asterisk: Device is not in use (1) on channel SCCP/02514193XXX
    -- SEP001BD40B5XXX: Attaching line 02517129XXX with instance 2 to this device
    -- SEP001BD40B5XXX: sccp_device_find_index_for_line searching for 02517129XXX
    -- SEP001BD40B5XXX: sccp_device_find_index_for_line found: 2
    -- SEP001BD40B5XXX: sccp_device_find_index_for_line return: 2
       > notify asterisk to set state to sccp channelstate DOWN (0) => asterisk: Device is not in use (1) on channel SCCP/02517129XXX

chaos2000 · 1 Sep 2010

Dann musst da eine Beschränkung sein.
sccp show globals

Bzgl default context bist du dir der Sicherheit in Verbindung mit sip bewusst?

mschatz · 1 Sep 2010

Ja natürlich, aber das kann ich ja später noch umstellen wenn alles vernünftig läuft. Ich weiß aber was du meinst.

Code:

Platform byte order   : LITTLE ENDIAN
Protocol Version      : 17
Server Name           : Asterisk
Bind Address          : 178.77.72.XXX:2000
Nat                   : No
Direct RTP            : No
Keepalive             : 30
Debug                 : (1) core
Date format           : D.M.Y
First digit timeout   : 16
Digit timeout         : 8
SCCP tos (signaling)  : 104
SCCP cos (signaling)  : 4
AUDIO tos (rtp)       : 184
AUDIO cos (rtp)       : 6
VIDEO tos (vrtp)      : 136
VIDEO cos (vrtp)      : 5
Context               : default
Language              :
Accountcode           :
Musicclass            :
AMA flags             : 3 - DOCUMENTATION
Callgroup             :
Pickupgroup           :
Capabilities          : 0x10c (ulaw|alaw|g729)
Codecs preference     : (alaw|ulaw|g729)
CFWDALL               : No
CFWBUSY               : No
CFWNOANSWER           : No
Call Events:          : No
DND                   : Reject
Park                  : Enabled
Private softkey       : Enabled
Echo cancel           : Enabled
Silence suppression   : Disabled
Trust phone ip        : No
Early RTP             : No
AutoAnswer ringtime   : 0
AutoAnswer tone       : 50
RemoteHangup tone     : 50
Transfer tone         : 0
CallWaiting tone      : 45
Jitterbuffer enabled  : No
Jitterbuffer forced   : No
Jitterbuffer max size : -1
Jitterbuffer resync   : -1
Jitterbuffer impl     :
Jitterbuffer log      : No
Jitterbuf target extra: -1

chaos2000 · 1 Sep 2010

kannst du in der src/scc_actions.c folgende ersetzung durchführen:

Code:

if(r->length < 56) {
	 	// registration request with protocol 0 version structure.

durch

Code:

if(r->length < 56 && d->protocolversion == 0) {
	 	// registration request with protocol 0 version structure.

mschatz · 1 Sep 2010

Ja habe ich gemacht, bringt aber keine Veränderung. Vom Server wird nach wie vor mit Protokollversion 12 geantwortet.

mschatz · 7 Sep 2010

Hast du noch eine Idee? Gruß Markus

chaos2000 · 7 Sep 2010

das phone mit der firmware macht nur 12, war von einer anderen version ausgegangen

masterbase · 24 Jun 2011

Hallo ich hab das selbe Problem mit 3.0 RC3.1
anbei sccp show device, sccp show globals und der Debug output von der Registrierung des Phones
Vielleicht kann ja wer licht in die Sache bringen.

Code:

sccp show device SEP001F9E265283
Current settings for selected Device
------------------------------------

MAC-Address        : SEP001F9EXXXXXX
Protocol Version   : Supported '20', In Use '20'
Keepalive          : 60
Registration state : OK(3)
State              : On Hook(0)
MWI handset light  : OFF
Description        : Sysadmin
Config Phone Type  : 7970
Skinny Phone Type  : Cisco 7970(30006)
Softkey support    : Yes
BTemplate support  : Yes
linesRegistered    : Yes
Image Version      : P00405000700
Timezone Offset    : 0
Capabilities       : 0x10c (ulaw|alaw|g729)
Codecs preference  : (alaw|g729|gsm)
DND Feature enabled: YES
DND Status         : Disabled
Can Transfer       : Yes
Can Park           : Yes
Private softkey    : Enabled
Can CFWDALL        : Yes
Can CFWBUSY        : Yes
Can CFWNOANSWER    : Yes
Dtmf mode          : In-Band
Nat                : No
Videosupport?      : No
Direct RTP         : No
Trust phone ip     : No
Bind Address       : XXX.XXX.XXX.XXX:52078
Early RTP          : No
Device State (Acc.): On Hook
Last Used Accessory: Speaker
Last dialed number : 23
PendingUpdate      : No
PendingDelete      : No

Code:

SCCP channel driver global settings
------------------------------------

Platform byte order   : LITTLE ENDIAN
Protocol Version      : 20
Server Name           : Asterisk
Bind Address          : XXX.XXX.XXX.XXX:2000
Nat                   : No
Direct RTP            : No
Keepalive             : 60
Debug                 : (1) core
Date format           : D.M.Y
First digit timeout   : 16
Digit timeout         : 8
SCCP tos (signaling)  : 104
SCCP cos (signaling)  : 4
AUDIO tos (rtp)       : 184
AUDIO cos (rtp)       : 6
VIDEO tos (vrtp)      : 136
VIDEO cos (vrtp)      : 5
Context               : sccp
Language              : at
Accountcode           :
Musicclass            : default
AMA flags             : 3 - DOCUMENTATION
Callgroup             :
Pickupgroup           :
Capabilities          : 0x10a (gsm|alaw|g729)
Codecs preference     : (alaw|g729|gsm)
CFWDALL               : Yes
CFWBUSY               : Yes
CFWNOANSWER           : Yes
Call Events:          : No
DND                   : Reject
Park                  : Enabled
Private softkey       : Enabled
Echo cancel           : Enabled
Silence suppression   : Disabled
Trust phone ip        : No
Early RTP             : Yes
AutoAnswer ringtime   : 1
AutoAnswer tone       : 50
RemoteHangup tone     : 50
Transfer tone         : 50
CallWaiting tone      : 45
Registration Context  :
Jitterbuffer enabled  : Yes
Jitterbuffer forced   : No
Jitterbuffer max size : 300
Jitterbuffer resync   : -1
Jitterbuffer impl     : adaptive
Jitterbuffer log      : Yes
Jitterbuf target extra: -1

Code:

SCCP: Accepted connection from XXX.XXX.XXX.XXX
    -- SCCP: Using ip XXX.XXX.XXX.XXX
[Jun 24 02:50:53] WARNING[32307]: sccp_socket.c:87 sccp_read_data: SCCP: read() returned zero length. Assuming closed connection.
    -- SCCP: Accepted connection from XXX.XXX.XXX.XXX
    -- SCCP: Using ip XXX.XXX.XXX.XXX
 SEP001F9EXXXXXX: is registering, Instance: 0, Type: Cisco 7970 (30006), Version: 20
    -- SEP001F9EXXXXXX: Allocating device to session (29) XXX.XXX.XXX.XXX
    -- SEP001F9EXXXXXX: Ask the phone to send keepalive message every 41 seconds
    -- SEP001F9EXXXXXX: asked our protocol capability (20). We answered (20).
    -- SEP001F9EXXXXXX: Building button template Cisco 7970(30006), user config 7970
    -- SEP001F9EXXXXXX: >> Send message Button Template Message
    -- SEP001F9EXXXXXX: Button(0)[ 1] = Redial
    -- SEP001F9EXXXXXX: Button(1)[ 2] = NewCall
    -- SEP001F9EXXXXXX: Button(2)[ 3] = Hold
    -- SEP001F9EXXXXXX: Button(3)[ 4] = Transfer
    -- SEP001F9EXXXXXX: Button(4)[ 5] = CFwdALL
    -- SEP001F9EXXXXXX: Button(5)[ 6] = CFwdBusy
    -- SEP001F9EXXXXXX: Button(6)[ 7] = CFwdNoAnswer
    -- SEP001F9EXXXXXX: Button(7)[ 8] = &lt;&lt;
    -- SEP001F9EXXXXXX: Button(8)[ 9] = EndCall
    -- SEP001F9EXXXXXX: Button(9)[10] = Resume
    -- SEP001F9EXXXXXX: Button(10)[11] = Answer
    -- SEP001F9EXXXXXX: Button(11)[12] = Info
    -- SEP001F9EXXXXXX: Button(12)[13] = Confrn
    -- SEP001F9EXXXXXX: Button(13)[14] = Park
    -- SEP001F9EXXXXXX: Button(14)[15] = Join
    -- SEP001F9EXXXXXX: Button(15)[16] = MeetMe
    -- SEP001F9EXXXXXX: Button(16)[17] = PickUp
    -- SEP001F9EXXXXXX: Button(17)[18] = GPickUp
    -- SEP001F9EXXXXXX: Button(18)[19] = RmLstC
    -- SEP001F9EXXXXXX: Button(19)[20] = CallBack
    -- SEP001F9EXXXXXX: Button(20)[21] = Barge
    -- SEP001F9EXXXXXX: Button(21)[22] = DND
    -- SEP001F9EXXXXXX: Button(22)[23] = ConfList
    -- SEP001F9EXXXXXX: Button(23)[24] = Select
    -- SEP001F9EXXXXXX: Button(24)[25] = Private
    -- SEP001F9EXXXXXX: Button(25)[26] = TrnsfVM
    -- SEP001F9EXXXXXX: Button(26)[27] = DirTrfr
    -- SEP001F9EXXXXXX: Button(27)[28] = iDivert
    -- SEP001F9EXXXXXX: Button(28)[29] = Video Mode
    -- SEP001F9EXXXXXX: Button(29)[30] = Intrcpt
    -- SEP001F9EXXXXXX: Button(30)[31] = Empty
    -- SEP001F9EXXXXXX: >> Send message SoftKey Template Response
    -- SEP001F9EXXXXXX: searching for softkeyset: softkeyset!
    -- SEP001F9EXXXXXX: using softkeyset: softkeyset!
    -- SEP001F9EXXXXXX: d->softkeyDefinition=softkeyset!
    -- SEP001F9EXXXXXX: softkey count: 11
    -- SEP001F9EXXXXXX: TRANSFER        is enabled
    -- SEP001F9EXXXXXX: DND             is disabled
    -- SEP001F9EXXXXXX: PRIVATE         is enabled
    -- SEP001F9EXXXXXX: PARK            is  enabled
    -- SEP001F9EXXXXXX: CFWDALL         is  enabled
    -- SEP001F9EXXXXXX: CFWDBUSY        is  enabled
    -- SEP001F9EXXXXXX: CFWDNOANSWER    is  enabled
    -- SEP001F9EXXXXXX: TRNSFVM/IDIVERT is  enabled
    -- SEP001F9EXXXXXX: MEETME          is  enabled
    -- SEP001F9EXXXXXX: PICKUPGROUP     is  enabled
    -- SEP001F9EXXXXXX: PICKUPEXTEN     is  enabled
    -- SEP001F9EXXXXXX: Set[0 ]= 0 :Redial     1 :GPickUp    2 :PickUp     3 :NewCall    4 :CFwdALL    5 :DND
    -- SEP001F9EXXXXXX: Set[1 ]= 0 :Hold       1 :EndCall    2 :Park       3 :Select     4 :CFwdALL    5 :CFwdBusy   6 :iDivert
    -- SEP001F9EXXXXXX: Set[2 ]= 0 :Resume     1 :NewCall    2 :EndCall    3 :Transfer   4 :Empty      5 :Select     6 :DirTrfr    7 :iDivert
    -- SEP001F9EXXXXXX: Set[3 ]= 0 :Answer     1 :EndCall    2 :iDivert
    -- SEP001F9EXXXXXX: Set[4 ]= 0 :Redial     1 :EndCall    2 :Private    3 :CFwdALL    4 :CFwdBusy   5 :PickUp     6 :GPickUp    7 :MeetMe
    -- SEP001F9EXXXXXX: Set[5 ]= 0 :Hold       1 :EndCall    2 :Transfer   3 :Empty      4 :Park       5 :Select     6 :DirTrfr    7 :CFwdALL    8 :CFwdBusy
    -- SEP001F9EXXXXXX: Set[6 ]= 0 :&lt;&lt;   1 :EndCall
    -- SEP001F9EXXXXXX: Set[7 ]= 0 :Hold       1 :EndCall    2 :Join
    -- SEP001F9EXXXXXX: Set[8 ]= 0 :EndCall    1 :Transfer   2 :CFwdALL    3 :iDivert
    -- SEP001F9EXXXXXX: Set[9 ]= 0 :Redial     1 :EndCall
    -- SEP001F9EXXXXXX: Set[10]= 0 :PickUp
    -- There are 11 SoftKeySets.
    -- SEP001F9EXXXXXX: >> Send message SoftKey Set Response
    -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 0  and call 0
    -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message
    -- SEP001F9EXXXXXX: >> Send message Config State Message
    -- SEP001F9EXXXXXX: Sending ConfigStatMessage, lines 2, speeddials 5
    -- SEP001F9EXXXXXX: Device has 8 Capabilities
    -- SEP001F9EXXXXXX: SCCP:    25 Wideband 256k             AST:     0 unknown
    -- SEP001F9EXXXXXX: SCCP:     4 G.711 u-law 64k           AST:     4 G.711 u-law
    -- SEP001F9EXXXXXX: SCCP:     2 G.711 A-law 64k           AST:     8 G.711 A-law
    -- SEP001F9EXXXXXX: SCCP:    15 G.729 Annex B             AST:     0 unknown
    -- SEP001F9EXXXXXX: SCCP:    16 G.729 Annex A + B         AST:     0 unknown
    -- SEP001F9EXXXXXX: SCCP:    11 G.729                     AST:     0 unknown
    -- SEP001F9EXXXXXX: SCCP:    12 G.729 Annex A             AST:   256 G.729A
    -- SEP001F9EXXXXXX: SCCP:     1 Non-standard codec        AST:     0 unknown
    -- SEP001F9EXXXXXX: Looking for line with instance 1.
    -- SEP001F9EXXXXXX: button instance 1, type: 0
    -- SCCP: Found line 200
    -- SEP001F9EXXXXXX: >> Send message Line State Message
    -- SEP001F9EXXXXXX: Send Forward Status.  Line: 200
    -- SEP001F9EXXXXXX: >> Send message Forward State Message
    -- SEP001F9EXXXXXX: Sent Forward Status.  Line: 200
    -- SEP001F9EXXXXXX: Got Forward Status Request.  Line: 1
    -- SEP001F9EXXXXXX: Looking for line with instance 1.
    -- SEP001F9EXXXXXX: button instance 1, type: 0
    -- SCCP: Found line 200
    -- SEP001F9EXXXXXX: Send Forward Status.  Line: 200
    -- SEP001F9EXXXXXX: >> Send message Forward State Message
    -- SEP001F9EXXXXXX: Sent Forward Status.  Line: 200
    -- SEP001F9EXXXXXX: Looking for line with instance 2.
    -- SEP001F9EXXXXXX: button instance 1, type: 0
    -- SEP001F9EXXXXXX: button instance 2, type: 0
    -- SCCP: Found line 2000
    -- SEP001F9EXXXXXX: >> Send message Line State Message
    -- SEP001F9EXXXXXX: Send Forward Status.  Line: 2000
    -- SEP001F9EXXXXXX: >> Send message Forward State Message
    -- SEP001F9EXXXXXX: Sent Forward Status.  Line: 2000
    -- SEP001F9EXXXXXX: Got Forward Status Request.  Line: 2
    -- SEP001F9EXXXXXX: Looking for line with instance 2.
    -- SEP001F9EXXXXXX: button instance 1, type: 0
    -- SEP001F9EXXXXXX: button instance 2, type: 0
    -- SCCP: Found line 2000
    -- SEP001F9EXXXXXX: Send Forward Status.  Line: 2000
    -- SEP001F9EXXXXXX: >> Send message Forward State Message
    -- SEP001F9EXXXXXX: Sent Forward Status.  Line: 2000
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message
    -- SEP001F9EXXXXXX: Speed Dial Request for Button 5
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Message
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message
    -- SEP001F9EXXXXXX: got FeatureChangeEvent 1
    -- SEP001F9EXXXXXX: >> Send message Define Time Date
    -- SEP001F9EXXXXXX: Send date/time
    -- SEP001F9EXXXXXX: >> Send message Set Lamp Message
    -- SEP001F9EXXXXXX: Device does not support RegisterAvailableLinesMessage, force this
    -- SEP001F9EXXXXXX: Phone available lines 2
    -- SEP001F9EXXXXXX: Attaching line 200 with instance 1 to this device
    -- SEP001F9EXXXXXX: sccp_device_find_index_for_line searching for 200
    -- SEP001F9EXXXXXX: sccp_device_find_index_for_line found: 1
    -- SEP001F9EXXXXXX: sccp_device_find_index_for_line return: 1
    -- SEP001F9EXXXXXX: Attaching line 2000 with instance 2 to this device
    -- SEP001F9EXXXXXX: sccp_device_find_index_for_line searching for 2000
    -- SEP001F9EXXXXXX: sccp_device_find_index_for_line found: 2
    -- SEP001F9EXXXXXX: sccp_device_find_index_for_line return: 2
    -- SEP001F9EXXXXXX: >> Send message Display Notify Message
    -- SEP001F9EXXXXXX: Display notify with timeout 5
    -- SEP001F9EXXXXXX: >> Send message Clear Prompt Status Message
    -- SEP001F9EXXXXXX: Clear the status prompt on line 0 and callid 0
    -- SEP001F9EXXXXXX: >> Send message Display Dynamic Prompt Status Message
    -- SEP001F9EXXXXXX: Display prompt on line 0, callid 0, timeout 0
    -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 0  and call 0
    -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message
    -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 1  and call 0
    -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message
    -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 2  and call 0
    -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message
    -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 3  and call 0
    -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message
    -- SEP001F9EXXXXXX: Send softkeyset to On Hook(0) on line 4  and call 0
    -- SEP001F9EXXXXXX: >> Send message Select SoftKeys Message
    -- SEP001F9EXXXXXX: >> Send message SpeedDial State Dynamic Message
    -- SEP001F9EXXXXXX: Post registration process... done!
    -- SEP001F9EXXXXXX: Accessory 'Headset' is 'On Hook' (0)
    -- SEP001F9EXXXXXX: Accessory 'Handset' is 'On Hook' (0)

chaos2000 · 27 Jun 2011

Kannst Du das Problem noch mal kurz erläutern?

masterbase · 28 Jun 2011

Für alle getätigten Anrufen steht in der "Placed Calls" liste nur "To Unknown Number" wenn ich auf Details drücke kann ich die Uhrzeit und die Dauer des Gesprächs sehen.

Neue Probleme mit Chan-SCCP-3.0_RC2 (gelöst)

Neuer User

Neuer User

Aktives Mitglied

Neuer User

Aktives Mitglied

Aktives Mitglied

Neuer User

Aktives Mitglied

Neuer User

Aktives Mitglied

Neuer User

Aktives Mitglied

Neuer User

Aktives Mitglied

Neuer User

Neuer User

Aktives Mitglied

Neuer User

Aktives Mitglied

Neuer User

Statistik des Forums