[Frage] Ich brauche einen Schluck TCP-Dump von einem Siemens optipoint-Telefon

[vigggen]

Google translate englich to german

Wir versuchen, das optipoint-Telefone arbeiten mit Asterisk und BLF in Pickup-Gruppen zu erhalten.
Das Problem ist, dass wir nicht die Möglichkeit, einen Schluck Dump machen, weil wir nicht eine Openscale oder HiPath-System läuft sip nicht.
Was wir brauchen, ist Dump ausgeführt optipoint-Telefon mit SIP und eines Openscale og Hipath System.
Der Dump muss, wenn ein Telefon ist Mitglied einer Übernahmegruppe und erhalten ein Signal, dass jemand in der pickup wird immer genannt.

Wir werden, wenn wir die richtigen Daten geben Ihnen einen rewared.

Mit freundlichen Grüßen Johan Sandin

English
We are trying to get the Optipoint phones working with asterisk and BLF in pickup groups.
The problem is that we don't have the possibility to make a sip dump because we don't have a OpenScale or HiPath system running sip.
What we need is dump from running Optipoint phone running sip and a OpenScale og Hipath system.
The dump must be when a phone is member of a pickup group and get a signal that some one in the pickupgroup is getting called.

If we can get the right data we will give you a rewared.

Best regards Johan Sandin

 

[koyaanisqatsi]

Hello

Google translate is very funny.

Isnt it enough to see the trace of asterisk?

sip.conf

[general]
sipdebug = yes
dumphistory = yes
recordhistory = yes

After setting this you are able to watch the SIP trace in asterisk CLI.

[root@server ~]# asterisk -r

or

[root@server ~]# asterisk -rvvvv

 

[vigggen]

Hello Koyaanisqatsi

What I need ist the trace from a sip enabled HiPath or OpenScale PBX when an Optipoint Phone is getting a LED indication from a pickup group(huntgroup).

The default behavior is with optiPoint and asterisk:

The optiPoint 410 S / optiPoint 420 S telephones feature a key function Call Pickup
signalling a call within a pickup group via an LED. However, in an Asterisk environment this feature is inoperable as
Asterisk does not send the necessary SIP notification.

We have it working with openstage but the signalling is different on optipPoint so a trace from a HiPath (OpenScale) and Call Pickup feature enabled is what I'm looking for.

/Johan

 

[OpenOpti]

Hi,

normally group pickup on OpenStage and optiPoint works the same.

May be there is a mix-up with "Directed Pickup" (OpenStage-only) or Call Park/Pickup (optiPoint, but only @ Sylantro-server)?
A huntgroup (in OpenScape-world) is not alerted via key - the key for huntgroup is used as busy/not-busy state (to get call or to do not get a call, when hotline is called).