HFC Karte auf AAH 2.3 - Problem

[mediacomet]

Habe AAH 2.3 mit 1 PCI HFC aufgesetzt und bristuff-0.3.0-PRE-1 eingspielt (donDisperato) dabei gab es keine Probleme.
Allerdings bekomme ich kein Freizeichen (modifizierte NTBA an HFC) hat vorher mit Eisfair geklappt.
Die Fritz ist direkt am NTBA angeschlossen - wie gesagt - auf Eisfair hats geklappt ....

Log:
109: Match Found
Jan 26 18:58:26 DEBUG[2343] chan_sip.c: Registration successful
Jan 26 18:58:26 DEBUG[2343] chan_sip.c: Cancelling timeout 102
Jan 26 18:58:58 DEBUG[2343] chan_sip.c: Auto destroying call '[email protected]'
Jan 26 18:59:49 DEBUG[2822] manager.c: Manager received command 'Command'
Jan 26 18:59:49 DEBUG[2822] manager.c: Manager received command 'Command'
Jan 26 19:00:11 DEBUG[2343] chan_sip.c: Scheduled a registration timeout for freenet.de id #106
Jan 26 19:00:15 DEBUG[2343] chan_sip.c: Stopping retransmission on '[email protected]' of Request 110: Match Found
Jan 26 19:00:15 DEBUG[2343] chan_sip.c: Stopping retransmission on '[email protected]' of Request 111: Match Found
Jan 26 19:00:15 DEBUG[2343] chan_sip.c: Registration successful
Jan 26 19:00:15 DEBUG[2343] chan_sip.c: Cancelling timeout 106
Jan 26 19:00:47 DEBUG[2343] chan_sip.c: Auto destroying call '[email protected]'
Jan 26 19:00:47 DEBUG[2343] chan_sip.c: Auto destroying call '[email protected]'
**************************************
zap show status sagt:
HFC-S PCI A ISDN card 0 |TE| layer 1 DE
Alarms OK - IRQ 0 - bpviol 0 - CRC4 0

**************************************
zapata.conf:
[trunkgroups]

[channels]
language=de
switchtype=euroisdn
pridialplan=local
prilocaldialplan=local


signalling = bri_net_ptmp
;signalling = fxs_ks
rxwink=300

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
nationalprefix = 0
internationalprefix = 00
faxdetect=incoming
group=0
callgroup=1
pickupgroup=1
immediate=yes
context=from-pstn
channel => 1-2

;Include genzaptelconf configs
#include zapata-auto.conf

;Include AMP configs
#include zapata_additional.conf

****************************
zaptel.conf:
loadzone=nl
defaultzone=nl

span=1,1,3,ccs,ami
bchan=1-2
dchan=3

Hat jemand eine Idee?

Ralph