help needed for fritzbox and alanog line

[binary_dreamer]

fritz*CLI> capi show channels
No such command 'capi show channels' (type 'help capi show' for other possible commands)

fritz*CLI> exit
# more capi.conf
immediate=yes
------------------
[general]
bindport=5061
nationalprefix=0
internationalprefix=00
rxgain=1.0
txgain=1.0
language=en
ulaw=no
disallow=all
allow=alaw


[ANALOG]
ntmode=no
isdnmode=msn
incomingmsn=*
defaultcid=1234 ;i substituted my number with 1234
controller=4
group=1
softdtmf=off
relaxdtmf=off
accountcode=
immediate=yes
context=analog_in
bridge=no

 

[Tippfehler]

why bindport=5061? pls. delete

[ANALOG]
isdnmode=did
devices=1

 

[binary_dreamer]

Port 5060 is used from the fritz itself.
also my provider blocks port 5060, so i have to change to something else.

 

[Tippfehler]

You have an analog telephone provider with a blocked port? Ports are only for IP-telephony.

 

[binary_dreamer]

Hi.
Sorry for the confusion. Let's explain.
My ISP for the internet blocks port 5060.
For the telephone i am using a different provider which gives me only a PSTN line (analog) for the voice. This PSTN line i got it connected in fritz. That is the reason for the 5061 port.

 

[Tippfehler]

Please read the edited comment #22.

 

[binary_dreamer]

how do we proceed?
5061 is not blocked and i am using an analog provider in my fritz to get outgoing calls.

have in mind that i do have exactly the same provider in another site that instead of fritzbox i do run it on an Elastix server with analog (fxo) card, binded to port 5061. So what is different here??

 

[Tippfehler]

Analog = Analog => over 100 years old, ...
VoIP = internet-protocoll with ports and udp, ...
capi = analog or isdn => old ..., no TCP/IP, no ports, only frequencies and signals, ...

You can not bind ports to this old analog line!

 

[binary_dreamer]

OK i will change it to a different provider since i do have two isps. How do we proceed regarding the chan capi you have mentioned that i am missing?
Now i am to a different provider that does not block 5060.
shall i change the sip.conf from 5061 to 5060 as well? or sip.conf is ok to be at 5060?

 

[Tippfehler]

????
Why?
We do not need a provider. We do not need to change the sip.conf. We are testing the old analog line, ...

Dit you change to
[ANALOG]
isdnmode=did
devices=1
?

 

[binary_dreamer]

yeap i did change it.
here is the outcome when i am calling in to the fritz
fritz*CLI> Aug 10 20:33:04 telefon[380]: SIGCHLD received!
but nothing rings inside.


here is when i am calling out

[Aug 10 17:33:40] WARNING[1124]: channel.c:3470 ast_request: No channel type registered for 'CAPI'

[Aug 10 17:33:40] WARNING[1124]: app_dial.c:1450 dial_exec_full: Unable to create channel of type 'CAPI' (cause 66 - Channel not implemented)

fritz*CLI>
This is why i am lost.

 

[Tippfehler]

Unable to create channel of type 'CAPI' (cause 66 - Channel not implemented)

That ist the Problem.

Is capi set to noload in modules.conf?