[gelöst] Freizeichen/Stille bei stehender CAPI Verbindung

[basiaf]

Hallo ! Ich habe folgendes Problem mit meinem Asterisk server :
Interne Gespräche laufen alle problemlos, aber sobald ich über Chan_capi-cm rauswähle, bekomme ich die ganze Zeit nur ein Freizeichen, auch wenn der Gesprächspartner bereits abgehoben hat ( dieser hört nichts ). Ähnlich verhält es sich andersrum, wenn ich angerufen werde, jedoch habe ich dann auf beiden Seiten funkstille bei angezeigter verbindung...
Merkwürdiger weise steigt die Zahl der angezeigten freien B-Kanäle mit jedem Fehlversuch an :

Contr1: 2 B channels total, 3 B channels free.

Folgend ein log, was ich aufgezeichnet habe als ich mich selbst auf Handy angerufen habe :

    -- Executing Set("SIP/softphone-11480f78", "CALLERID(number)=9****2") in new stack
    -- Executing Dial("SIP/softphone-11480f78", "CAPI/contr1/0**********1") in new stack
       > data = contr1/0**********1 format=8
       > parsed dialstring: 'contr1' 'NULL' '0**********1' ''
       > capi request controller = 1
  == ISDN1#02: setting format alaw - 0x8 (alaw)
       > CAPI devicestate requested for ISDN1/0**********1
       > parsed dialstring: 'contr1' 'NULL' '0**********1' ''
  == ISDN1#02: Call CAPI/ISDN1/0**********1-3   (pres=0x00, ton=0x00)
       > CAPI devicestate requested for ISDN1/0**********1
CONNECT_CONF ID=001 #0x0009 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Info                            = 0x0

    -- ISDN1#02: received CONNECT_CONF PLCI = 0x101
CONNECT_REQ ID=001 #0x0009 LEN=0061
  Controller/PLCI/NCCI            = 0x1
  CIPValue                        = 0x1
  CalledPartyNumber               = <80>0**********1
  CallingPartyNumber              = <00 80>9****2
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BProtocol
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default
  BC                              = default
  LLC                             = default
  HLC                             = default
  AdditionalInfo
   BChannelinformation            = <00 00>
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

    -- Called contr1/0**********1
INFO_IND ID=001 #0x0d9d LEN=0015
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x800d
  InfoElement                     = default

INFO_RESP ID=001 #0x0d9d LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element SETUP ACK
INFO_IND ID=001 #0x0d9e LEN=0016
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x18
  InfoElement                     = <89>

INFO_RESP ID=001 #0x0d9e LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element CHANNEL IDENTIFICATION 89
INFO_IND ID=001 #0x0d9f LEN=0015
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x8002
  InfoElement                     = default

INFO_RESP ID=001 #0x0d9f LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element CALL PROCEEDING
    -- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Unknown control '15' (15) ] [ISDN1#02]
    -- CAPI/ISDN1/0**********1-3 is proceeding passing it to SIP/softphone-11480f78
INFO_IND ID=001 #0x0da0 LEN=0015
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x8001
  InfoElement                     = default

INFO_RESP ID=001 #0x0da0 LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element ALERTING
    -- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Unknown control '14' (14) ] [ISDN1#02]
    -- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Ringing (3) ] [ISDN1#02]
    -- CAPI/ISDN1/0**********1-3 is making progress passing it to SIP/softphone-11480f78
       > CAPI devicestate requested for ISDN1/0**********1
    -- CAPI/ISDN1/0**********1-3 is ringing
INFO_IND ID=001 #0x0da1 LEN=0020
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x29
  InfoElement                     = <06 09 0c 14 2d>

INFO_RESP ID=001 #0x0da1 LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element Date/Time 06/09/12 20:45
CONNECT_ACTIVE_IND ID=001 #0x0da2 LEN=0028
  Controller/PLCI/NCCI            = 0x101
  ConnectedNumber                 = <21 83>16091927971
  ConnectedSubaddress             = default
  LLC                             = default

CONNECT_ACTIVE_RESP ID=001 #0x0da2 LEN=0012
  Controller/PLCI/NCCI            = 0x101

CONNECT_B3_REQ ID=001 #0x000a LEN=0013
  Controller/PLCI/NCCI            = 0x101
  NCPI                            = default

    -- ISDN1#02: sent CONNECT_B3_REQ PLCI=0x101
CONNECT_B3_CONF ID=001 #0x000a LEN=0014
  Controller/PLCI/NCCI            = 0x10101
  Info                            = 0x0

  == ISDN1#02: CAPI Hangingup for PLCI=0x101 in state 2
    -- ISDN1#02: activehangingup (cause=0) for PLCI=0x101
DISCONNECT_CONF ID=001 #0x000b LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Info                            = 0x0

DISCONNECT_REQ ID=001 #0x000b LEN=0018
  Controller/PLCI/NCCI            = 0x101
  AdditionalInfo
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

ISDN1#02: wait for DISCONNECT_CONF
ISDN1#02: found and signal for DISCONNECT_CONF
ISDN1#02: cond signal received for DISCONNECT_CONF
  == Spawn extension (capi-out, 0**********1, 2) exited non-zero on 'SIP/softphone-11480f78'
       > CAPI devicestate requested for ISDN1/0**********1
       > CAPI devicestate requested for ISDN1/0**********1
INFO_IND ID=001 #0x0da3 LEN=0036
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x1c
  InfoElement                     = <91 a1 12 02 02 f3 f3 02 01 24>0<09>0<07 a1 05>0<03 02 01 05>

INFO_RESP ID=001 #0x0da3 LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element FACILITY
INFO_IND ID=001 #0x0da4 LEN=0019
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x4000
  InfoElement                     = <05 00 00 00>

INFO_RESP ID=001 #0x0da4 LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element CHARGE in UNITS
DISCONNECT_B3_IND ID=001 #0x0da5 LEN=0015
  Controller/PLCI/NCCI            = 0x10101
  Reason_B3                       = 0x3301
  NCPI                            = default

DISCONNECT_B3_RESP ID=001 #0x0da5 LEN=0012
  Controller/PLCI/NCCI            = 0x10101

DISCONNECT_REQ ID=001 #0x000c LEN=0018
  Controller/PLCI/NCCI            = 0x101
  AdditionalInfo
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

DISCONNECT_IND ID=001 #0x0da6 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Reason                          = 0x3400

DISCONNECT_RESP ID=001 #0x0da6 LEN=0012
  Controller/PLCI/NCCI            = 0x101

  == ISDN1#02: Interface cleanup PLCI=0x101

 

[basiaf]

Problem hat sich nach einem Kartentausch ergeben, nur merkwürdig dass sich der Fehler nur in Asterisk zeigte und bei keiner anderen Capi Anwendung (Capisuite).... Auf jeden Fall liess sich der Fehler auf einem anderem laufenden System mit der Karte reproduzieren.