System Debian 40r3 Etch mit asterisk/ libpri & zaptel 1.4. Trotz Anweisungen des Digium Supports und viel lesen bekomme ich den PRI nicht ans fliegen. Schicht 1 wird einfach nicht aufgebaut. Testgerät hierfür ist ein Aetra D2000 lite eingestellt auf PRI-E1 (CRC4) NT Simulation. Die Karte ist auf E1 eingestellt (Jumper = geschlossen)
HILFE
Details:
Kompalierte Software
Konfiguration Zaptel
Das Startverhalten:
zaptel restart
Asterisk Start (manuell-wird noch nicht autom. gestartet)
geladene Module
dmesg
HILFE
Details:
Kompalierte Software
Code:
ls /usr/src
asterisk-1.4.19
asterisk-addons-1.4.6
libpri-1.4.3
linux-headers-2.6.18-6
linux-headers-2.6.18-6-686
linux-kbuild-2.6.18
zaptel-1.4.9.2Konfiguration Zaptel
Code:
cat /etc/asterisk/zapata.conf
[channels]
language=de
context=default
switchtype=euroisdn
signalling=pri_cpe
group=1
channel => 1-15
channel => 17-31
cat /etc/zaptel.conf
loadzone=de
defaultzone=de
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16Das Startverhalten:
Code:
ztcfg -vvv
Zaptel Version: 1.4.9.2
Echo Canceller: MG2
Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
31 channels to configure.zaptel restart
Code:
/etc/init.d/zaptel restart
Unloading zaptel hardware drivers:.
Loading zaptel framework: done.
Waiting for zap to come online...OK
Loading zaptel hardware modules: tor2.
wct4xxp.
wcte12xp.
wct1xxp.
wcte11xp.
wctdm24xxp.
wcfxo.
wctdm.
wcusb.
xpp_usb.
Running ztcfg: done.Asterisk Start (manuell-wird noch nicht autom. gestartet)
Code:
/usr/sbin/asterisk -cv
Asterisk 1.4.19, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <[email protected]>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Asterisk Event Logger Started /var/log/asterisk/event_log
Asterisk Dynamic Loader Starting:
[Apr 8 12:23:01] NOTICE[3274]: cdr.c:1366 do_reload: CDR simple logging enabled.
Asterisk PBX Core Initializing
Registering builtin applications:
[Answer]
[BackGround]
[Busy]
[Congestion]
[Goto]
[GotoIf]
[GotoIfTime]
[ExecIfTime]
[Hangup]
[NoOp]
[Progress]
[ResetCDR]
[Ringing]
[SayNumber]
[SayDigits]
[SayAlpha]
[SayPhonetic]
[SetAMAFlags]
[SetGlobalVar]
[Set]
[ImportVar]
[Wait]
[WaitExten]
Asterisk Dynamic Loader Starting:
[Apr 8 12:23:01] NOTICE[3274]: loader.c:851 load_modules: 154 modules will be loaded.
res_musiconhold.so => (Music On Hold Resource)
res_features.so => (Call Features Resource)
[Apr 8 12:23:01] NOTICE[3274]: res_odbc.c:235 load_odbc_config: Adding ENV var: INFORMIXSERVER=my_special_database
[Apr 8 12:23:01] NOTICE[3274]: res_odbc.c:235 load_odbc_config: Adding ENV var: INFORMIXDIR=/opt/informix
[Apr 8 12:23:01] NOTICE[3274]: res_odbc.c:716 load_module: res_odbc loaded.
res_odbc.so => (ODBC Resource)
res_crypto.so => (Cryptographic Digital Signatures)
res_speech.so => (Generic Speech Recognition API)
res_monitor.so => (Call Monitoring Resource)
res_jabber.so => (AJI - Asterisk Jabber Interface)
[Apr 8 12:23:01] WARNING[3274]: res_smdi.c:1264 load_module: No SMDI interfaces are available to listen on, not starting SMDI listener.
res_indications.so => (Indications Resource)
res_adsi.so => (ADSI Resource)
res_agi.so => (Asterisk Gateway Interface (AGI))
[Apr 8 12:23:01] NOTICE[3274]: config.c:1270 ast_config_engine_register: Registered Config Engine odbc
res_config_odbc loaded.
res_config_odbc.so => (ODBC Configuration)
codec_alaw.so => (A-law Coder/Decoder)
func_odbc.so => (ODBC lookups)
codec_lpc10.so => (LPC10 2.4kbps Coder/Decoder)
chan_oss.so => (OSS Console Channel Driver)
format_sln.so => (Raw Signed Linear Audio support (SLN))
app_while.so => (While Loops and Conditional Execution)
app_stack.so => (Stack Routines)
app_url.so => (Send URL Applications)
app_directory.so => (Extension Directory)
app_zapbarge.so => (Barge in on Zap channel application)
func_cdr.so => (CDR dialplan function)
format_ogg_vorbis.so => (OGG/Vorbis audio)
chan_iax2.so => (Inter Asterisk eXchange (Ver 2))
app_playback.so => (Sound File Playback Application)
format_vox.so => (Dialogic VOX (ADPCM) File Format)
app_image.so => (Image Transmission Application)
app_zapateller.so => (Block Telemarketers with Special Information Tone)
func_db.so => (Database (astdb) related dialplan functions)
format_mp3.so => (MP3 format [Any rate but 8000hz mono is optimal])
app_chanspy.so => (Listen to the audio of an active channel)
cdr_manager.so => (Asterisk Manager Interface CDR Backend)
func_timeout.so => (Channel timeout dialplan functions)
app_record.so => (Trivial Record Application)
app_realtime.so => (Realtime Data Lookup/Rewrite)
chan_mgcp.so => (Media Gateway Control Protocol (MGCP))
chan_agent.so => (Agent Proxy Channel)
func_groupcount.so => (Channel group dialplan functions)
[Apr 8 12:23:01] NOTICE[3274]: pbx_ael.c:4137 pbx_load_module: Starting AEL load process.
[Apr 8 12:23:01] NOTICE[3274]: pbx_ael.c:4144 pbx_load_module: AEL load process: calculated config file name '/etc/asterisk/extensions.ael'.
[Apr 8 12:23:01] NOTICE[3274]: pbx_ael.c:4152 pbx_load_module: AEL load process: parsed config file name '/etc/asterisk/extensions.ael'.
[Apr 8 12:23:01] NOTICE[3274]: pbx_ael.c:4155 pbx_load_module: AEL load process: checked config file name '/etc/asterisk/extensions.ael'.
[Apr 8 12:23:01] NOTICE[3274]: pbx_ael.c:4157 pbx_load_module: AEL load process: compiled config file name '/etc/asterisk/extensions.ael'.
[Apr 8 12:23:01] NOTICE[3274]: pbx_ael.c:4160 pbx_load_module: AEL load process: merged config file name '/etc/asterisk/extensions.ael'.
[Apr 8 12:23:01] NOTICE[3274]: pbx_ael.c:4163 pbx_load_module: AEL load process: verified config file name '/etc/asterisk/extensions.ael'.
pbx_ael.so => (Asterisk Extension Language Compiler)
func_base64.so => (base64 encode/decode dialplan functions)
format_g729.so => (Raw G729 data)
app_sendtext.so => (Send Text Applications)
app_authenticate.so => (Authentication Application)
format_gsm.so => (Raw GSM data)
app_dial.so => (Dialing Application)
codec_gsm.so => (GSM Coder/Decoder)
cdr_csv.so => (Comma Separated Values CDR Backend)
app_system.so => (Generic System() application)
app_dumpchan.so => (Dump Info About The Calling Channel)
func_math.so => (Mathematical dialplan function)
app_waitforsilence.so => (Wait For Silence)
app_amd.so => (Answering Machine Detection Application)
app_followme.so => (Find-Me/Follow-Me Application)
app_forkcdr.so => (Fork The CDR into 2 separate entities)
app_mp3.so => (Silly MP3 Application)
app_voicemail.so => (Comedian Mail (Voicemail System))
app_db.so => (Database Access Functions)
func_logic.so => (Logical dialplan functions)
format_ilbc.so => (Raw iLBC data)
func_cut.so => (Cut out information from a string)
app_exec.so => (Executes dialplan applications)
cdr_custom.so => (Customizable Comma Separated Values CDR Backend)
app_directed_pickup.so => (Directed Call Pickup Application)
app_waitforring.so => (Waits until first ring after time)
app_test.so => (Interface Test Application)
func_rand.so => (Random number dialplan function)
app_readfile.so => (Stores output of file into a variable)
app_nbscat.so => (Silly NBS Stream Application)
pbx_spool.so => (Outgoing Spool Support)
app_disa.so => (DISA (Direct Inward System Access) Application)
app_sayunixtime.so => (Say time)
app_saycountpl.so => (Say polish counting words)
app_lookupblacklist.so => (Look up Caller*ID name/number from blacklist database)
app_chanisavail.so => (Check channel availability)
app_transfer.so => (Transfer)
app_setcdruserfield.so => (CDR user field apps)
pbx_loopback.so => (Loopback Switch)
app_echo.so => (Simple Echo Application)
app_cdr.so => (Tell Asterisk to not maintain a CDR for the current call)
app_ices.so => (Encode and Stream via icecast and ices)
app_adsiprog.so => (Asterisk ADSI Programming Application)
format_g723.so => (G.723.1 Simple Timestamp File Format)
codec_g726.so => (ITU G.726-32kbps G726 Transcoder)
cdr_odbc.so => (ODBC CDR Backend)
chan_gtalk.so => (Gtalk Channel Driver)
app_mixmonitor.so => (Mixed Audio Monitoring Application)
app_channelredirect.so => (Channel Redirect)
app_milliwatt.so => (Digital Milliwatt (mu-law) Test Application)
chan_local.so => (Local Proxy Channel (Note: used internally by other modules))
app_setcallerid.so => (Set CallerID Application)
func_strings.so => (String handling dialplan functions)
[Apr 8 12:23:01] NOTICE[3274]: chan_ooh323.c:2494 load_module: ---------------------------------------------------------------------------------
--- ******* IMPORTANT NOTE ***********
---
--- This module is currently unsupported. Use it at your own risk.
---
---------------------------------------------------------------------------------
-- == Setting default context to default
chan_ooh323.so => (Objective Systems H323 Channel)
pbx_config.so => (Text Extension Configuration)
app_controlplayback.so => (Control Playback Application)
app_read.so => (Read Variable Application)
app_queue.so => (True Call Queueing)
func_enum.so => (ENUM related dialplan functions)
app_parkandannounce.so => (Call Parking and Announce Application)
func_callerid.so => (Caller ID related dialplan function)
func_moh.so => (Music-on-hold dialplan function)
func_curl.so => (Load external URL)
app_getcpeid.so => (Get ADSI CPE ID)
app_softhangup.so => (Hangs up the requested channel)
codec_adpcm.so => (Adaptive Differential PCM Coder/Decoder)
app_sms.so => (SMS/PSTN handler)
format_wav_gsm.so => (Microsoft WAV format (Proprietary GSM))
func_language.so => (Channel language dialplan function)
app_alarmreceiver.so => (Alarm Receiver for Asterisk)
pbx_realtime.so => (Realtime Switch)
func_uri.so => (URI encode/decode dialplan functions)
app_senddtmf.so => (Send DTMF digits Application)
format_jpeg.so => (JPEG (Joint Picture Experts Group) Image Format)
app_privacy.so => (Require phone number to be entered, if no CallerID sent)
func_realtime.so => (Read/Write values from a RealTime repository)
app_dictate.so => (Virtual Dictation Machine)
app_talkdetect.so => (Playback with Talk Detection)
codec_speex.so => (Speex Coder/Decoder)
func_md5.so => (MD5 digest dialplan functions)
codec_ulaw.so => (mu-Law Coder/Decoder)
format_h263.so => (Raw H.263 data)
app_meetme.so => (MeetMe conference bridge)
app_random.so => (Random goto)
== No hardware transcoders found.
codec_zap.so => (Generic Zaptel Transcoder Codec Translator)
format_pcm.so => (Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.722 16Khz)
app_zapras.so => (Zap RAS Application)
res_convert.so => (File format conversion CLI command)
app_userevent.so => (Custom User Event Application)
chan_phone.so => (Linux Telephony API Support)
func_sha1.so => (SHA-1 computation dialplan function)
app_settransfercapability.so => (Set ISDN Transfer Capability)ap.so => (Zapata Telephony)
func_channel.so => (Channel information dialplan function)
format_h264.so => (Raw H.264 data)
app_verbose.so => (Send verbose output)
pbx_dundi.so => (Distributed Universal Number Discovery (DUNDi))
format_g726.so => (Raw G.726 (16/24/32/40kbps) data)
res_clioriginate.so => (Call origination from the CLI)
app_lookupcidname.so => (Look up CallerID Name from local database)
[Apr 8 12:23:01] WARNING[3274]: chan_sip.c:16281 add_realm_authentication: Format for authentication entry is user[:secret]@realm at line 14
[Apr 8 12:23:01] WARNING[3274]: chan_sip.c:16281 add_realm_authentication: Format for authentication entry is user[:secret]@realm at line 24
chan_sip.so => (Session Initiation Protocol (SIP))
app_macro.so => (Extension Macros)
app_speech_utils.so => (Dialplan Speech Applications)
app_zapscan.so => (Scan Zap channels application)
app_hasnewvoicemail.so => (Indicator for whether a voice mailbox has messages in a given folder.)
app_page.so => (Page Multiple Phones)
app_morsecode.so => (Morse code)
app_externalivr.so => (External IVR Interface Application)
func_global.so => (Global variable dialplan functions)
codec_a_mu.so => (A-law and Mulaw direct Coder/Decoder)
format_wav.so => (Microsoft WAV format (8000Hz Signed Linear))
func_env.so => (Environment/filesystem dialplan functions)
app_flash.so => (Flash channel application)
app_festival.so => (Simple Festival Interface)
Asterisk Ready.
*CLI>geladene Module
Code:
lsmod
Module Size Used by
i915 17728 2
drm 61332 3 i915
ppdev 8676 0
lp 11012 0
xpp_usb 16804 0
xpp 122592 1 xpp_usb
wcusb 14144 0
wctdm 34560 0
wcfxo 11776 0
wctdm24xxp 106048 0
wcte11xp 22624 0
wct1xxp 13312 0
wct4xxp 293856 0
tor2 87648 0
ipv6 226272 14
dm_snapshot 15552 0
dm_mirror 19152 0
dm_mod 50232 2 dm_snapshot,dm_mirror
sbp2 20840 0
scsi_mod 124168 1 sbp2
loop 15048 0
snd_cmipci 31456 0
snd_pcm_oss 38368 0
snd_mixer_oss 15200 1 snd_pcm_oss
snd_pcm 68676 2 snd_cmipci,snd_pcm_oss
snd_page_alloc 10184 1 snd_pcm
snd_opl3_lib 9920 1 snd_cmipci
snd_hwdep 8836 1 snd_opl3_lib
snd_seq_dummy 3844 0
snd_seq_oss 28768 0
snd_seq_midi 8192 0
snd_seq_midi_event 7008 2 snd_seq_oss,snd_seq_midi
snd_mpu401 7528 0
snd_mpu401_uart 8064 2 snd_cmipci,snd_mpu401
tsdev 7520 0
analog 10784 0
parport_pc 32132 1
snd_seq 45680 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 20996 3 snd_pcm,snd_opl3_lib,snd_seq
snd_rawmidi 22560 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 7820 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
wcte12xp 58816 0
firmware_class 9600 3 wctdm24xxp,wct4xxp,wcte12xp
zaptel 184644 10 xpp,wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wct4xxp,tor2,wcte12xp
snd 47012 13 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_seq_oss,snd_mpu401,snd_mpu401_uart,snd_seq,snd_timer,snd_rawmidi,snd_seq_device
soundcore 9248 1 snd
crc_ccitt 2240 1 zaptel
parport 33256 3 ppdev,lp,parport_pc
gameport 14632 2 snd_cmipci,analog
floppy 53156 0
psmouse 35016 0
serio_raw 6660 0
i2c_i801 7468 0
pcspkr 3072 0
shpchp 33024 0
pci_hotplug 28704 1 shpchp
rtc 12372 0
i2c_core 19680 1 i2c_i801
intel_agp 22204 1
agpgart 29896 3 drm,intel_agp
evdev 9088 1
eth1394 18212 0
ext3 119240 5
jbd 52456 1 ext3
mbcache 8356 1 ext3
ide_cd 36064 0
cdrom 32544 1 ide_cd
ide_disk 14848 7
generic 4868 0 [permanent]
ohci1394 30800 0
ieee1394 86904 3 sbp2,eth1394,ohci1394
via_rhine 22664 0
mii 5344 1 via_rhine
ehci_hcd 28136 0
uhci_hcd 21164 0
piix 9444 0 [permanent]
ide_core 110504 4 ide_cd,ide_disk,generic,piix
usbcore 112644 5 xpp_usb,wcusb,ehci_hcd,uhci_hcd
processor 28840 0dmesg
Code:
dmesg
Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-18etch1) ([email protected]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Feb 10 22:11:31 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f800000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
120MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4cd0
On node 0 totalpages: 260096
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 30720 pages, LIFO batch:7
DMI 2.2 present.
ACPI: Unable to locate RSDP
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 15:2 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
Detected 2396.010 MHz processor.
Built 1 zonelists. Total pages: 260096
Kernel command line: root=/dev/hda2 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023256k/1040384k available (1541k kernel code, 16368k reserved, 580k data, 196k init, 122880k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4796.13 BogoMIPS (lpj=9592275)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
Total of 1 processors activated (4796.13 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4763k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb330, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbd20
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbd50, dseg 0xf0000
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 137
PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 137
PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 161
PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 153
PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 193
PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 137
PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 145
PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 137
PCI->APIC IRQ transform: 0000:01:05.0[A] -> IRQ 177
PCI->APIC IRQ transform: 0000:01:07.0[A] -> IRQ 185
PCI->APIC IRQ transform: 0000:01:0c.0[A] -> IRQ 169
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: ec000000-edffffff
PREFETCH window: 40000000-400fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1207643854.924:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
USB Universal Host Controller Interface driver v3.0
via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
ieee1394: Initialized config rom entry `ip1394'
hda: Hitachi HDS721616PLAT80, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 137, io base 0x0000d800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 161, io base 0x0000d000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 153, io base 0x0000d400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 193, io mem 0xee080000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
eth0: VIA Rhine at 0x1c000, 00:50:ba:b2:52:eb, IRQ 137.
eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link 41e1.
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[169] MMIO=[ed002000-ed0027ff] Max Packet=[2048] IR/IT contexts=[8/8]
hda: max request size: 512KiB
hda: 321672960 sectors (164696 MB) w/7384KiB Cache, CHS=20023/255/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0030670000000191]
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
intel_rng: FWH not detected
Real Time Clock Driver v1.12ac
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input1
FDC 0 is a post-1991 82077
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.4.9.2
Zaptel Echo Canceller: MG2
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ts: Compaq touchscreen protocol output
wcte12x[p]: Setting up global serial parameters for E1
wcte12x[p]: Found a Wildcard TE120P
Adding 1951856k swap on /dev/hda5. Priority:-1 extents:1 across:1951856k
EXT3 FS on hda2, internal journal
loop: loaded (max 8 devices)
SCSI subsystem initialized
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [email protected]
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Registered Tormenta2 PCI
usbcore: registered new driver wcusb
Wildcard USB FXS Interface driver registered
INFO-xpp: revision trunk-r5254 MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with ECHO_SUPPRESSION
INFO-xpp: FEATURE: without XPP_EC_CHUNK
INFO-xpp: FEATURE: with sync_tick() from ZAPTEL
INFO-xpp_usb: revision trunk-r5254 [sizeof(uframe)=180]
usbcore: registered new driver xpp_usb
Registered tone zone 29 (Germany)
wcte12x[p]: Span configured for CCS/HDB3/CRC4
wcte12x[p]: Setting yellow alarm
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth1: no IPv6 routers present
[drm] Initialized drm 1.0.1 20051102
[drm] Initialized i915 1.5.0 20060119 on minor 0
wcte12x[p]: Span configured for CCS/HDB3/CRC4