CME, Ruf bei Rufumleitung bricht nach 79 Sek. ab

[HenningLo]

Hallo zusammen,

in meiner Konfiguration CME auf 2801 mit einem BRI (MSN) funktioniert alles eigentlich wunderbar bis auf:

bei einer Rufumleitung (callfwd) von extern auf extern bricht der Call nach 79 Sekunden zusammen zumindest auf dem BRI. Aud den Endgeräten wird der Call nicht beendet, aber es wird natürlich keine Sprache mehr übertragen.

Hat jemand irgendeine Idee ???

Bei bedarf poste ich gerne die Konfig.

Vielen dank im Voraus.

Henning

 

[Stom2006]

...

Version des CME?

Was sagt das zugehörige ISDN Debug?

Hast du ein Phone nach extern weitergeleitet oder willst du eine feste Weiterleitung für eine bestimmte angerufene Nummer nach extern machen?

Oder wie es so schön heißt: Ich brauche mehr Details

...

Gruß,
Marcus

 

[HenningLo]

Hallo Marcus,

schon mal vorab ein paar Infos

1. CME V7.0.1 auf IOS 12(4)20T1
2. ein internes Phone ist auf eine externe Nummer weitergeleitet

3. Welches ISDN Debug brauchst Du ???

Konfig und ISDN-Debug poste ich dann heute im Laufe des Abends.

Gruß,
Henning

 

[Stom2006]

...

Ich würde mal mit einen

debug isdn q931 starten.

Wie äußert sich der Abbruch denn? Wer "hört" was?

...

Gruß,
Marcus

 

[HenningLo]

Hallo Marcus,

anbei der "debug isdn q931"

Oct 27 20:22:08.737: %SYS-5-CONFIG_I: Configured from console by admin on vty0 (
172.16.0.39)
gw-01#
gw-01#
gw-01#
Oct 27 20:22:55.541: ISDN BR0/0/0 Q931: RX <- SETUP pd = 8 callref = 0x01
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Exclusive, B1
Calling Party Number i = 0x2183, '1736161831'
Plan:ISDN, Type:National
Called Party Number i = 0xC1, '262994'
Plan:ISDN, Type:Subscriber(local)
High Layer Compat i = 0x9181
Oct 27 20:22:55.557: ISDN BR0/0/0 Q931: TX -> CALL_PROC pd = 8 callref = 0x81
Channel ID i = 0x89
Exclusive, B1
Oct 27 20:22:55.565: ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x2
0x1, Calling num 001736161831
Oct 27 20:22:55.565: ISDN BR0/0/0 Q931: Sending SETUP callref = 0x0024 callID =
0x8025 switch = basic-net3 interface = User
Oct 27 20:22:55.689: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8 callref = 0x24
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x82
Preferred, B2
Calling Party Number i = 0x2183, '001736161831'
Plan:ISDN, Type:National
Called Party Number i = 0xC1, '016090854650'
Plan:ISDN, Type:Subscriber(local)
High Layer Compat i = 0x9181
Sending Complete
Oct 27 20:22:56.137: ISDN BR0/0/0 Q931: RX <- CALL_PROC pd = 8 callref = 0xA4
Channel ID i = 0x8A
Exclusive, B2
Oct 27 20:23:01.833: ISDN BR0/0/0 Q931: RX <- ALERTING pd = 8 callref = 0xA4
Oct 27 20:23:01.841: ISDN BR0/0/0 Q931: TX -> ALERTING pd = 8 callref = 0x81
Oct 27 20:23:06.833: ISDN BR0/0/0 Q931: RX <- CONNECT pd = 8 callref = 0xA4
Date/Time i = 0x080A1B1517
Date (yr-mm-dd) = 08-10-27
Time (hr:mnt:sec) = 21:23:76
Connected Number i = 0x00A3
Oct 27 20:23:06.837: %ISDN-6-CONNECT: Interface BRI0/0/0:2 is now connected to 0
16090854650 N/A
Oct 27 20:23:06.837: ISDN BR0/0/0 Q931: TX -> CONNECT_ACK pd = 8 callref = 0x24
Oct 27 20:23:06.945: ISDN BR0/0/0 Q931: RX <- FACILITY pd = 8 callref = 0xA4
Facility i = 0x91A11302022DCC020122300AA1053003020117820100
Protocol Profile = Remote Operations Protocol
0xA11302022DCC020122300AA1053003020117820100
Component = Invoke component
Invoke Id = 11724
Operation = AOCDChargingUnit
Oct 27 20:23:06.961: ISDN BR0/0/0 Q931: TX -> CONNECT pd = 8 callref = 0x81
Channel ID i = 0x89
Exclusive, B1
Oct 27 20:23:07.173: ISDN BR0/0/0 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x01
Oct 27 20:23:07.173: %ISDN-6-CONNECT: Interface BRI0/0/0:1 is now connected to 1
736161831 N/A
Oct 27 20:23:11.845: ISDN BR0/0/0 Q931: RX <- INFORMATION pd = 8 callref = 0xA4

Display i = '23 Einheiten'
Oct 27 20:23:11.849: ISDN BR0/0/0 Q931: TX -> INFORMATION pd = 8 callref = 0x81

Display i = '23 Einheiten'
Sending Complete
Oct 27 20:23:12.049: ISDN BR0/0/0 Q931: RX <- STATUS pd = 8 callref = 0x01
Cause i = 0x82E39828 - Information element not implemented
Call State i = 0x0A
Oct 27 20:23:12.837: %ISDN-6-CONNECT: Interface BRI0/0/0:2 is now connected to 0
16090854650 N/A
Oct 27 20:23:13.173: %ISDN-6-CONNECT: Interface BRI0/0/0:1 is now connected to 1
736161831 N/A
Oct 27 20:24:06.861: ISDN BR0/0/0 Q931: RX <- INFORMATION pd = 8 callref = 0xA4

Display i = '24 Einheiten'
Oct 27 20:24:06.865: ISDN BR0/0/0 Q931: TX -> INFORMATION pd = 8 callref = 0x81

Display i = '24 Einheiten'
Sending Complete
Oct 27 20:24:07.009: ISDN BR0/0/0 Q931: RX <- FACILITY pd = 8 callref = 0xA4
Facility i = 0x91A11302022DD2020122300AA1053003020118820100
Protocol Profile = Remote Operations Protocol
0xA11302022DD2020122300AA1053003020118820100
Component = Invoke component
Invoke Id = 11730
Operation = AOCDChargingUnit
Oct 27 20:24:07.137: ISDN BR0/0/0 Q931: RX <- STATUS pd = 8 callref = 0x01
Cause i = 0x82E39828 - Information element not implemented
Call State i = 0x0A
Oct 27 20:24:11.861: ISDN BR0/0/0 Q931: RX <- INFORMATION pd = 8 callref = 0xA4

Display i = '25 Einheiten'
Oct 27 20:24:11.865: ISDN BR0/0/0 Q931: TX -> INFORMATION pd = 8 callref = 0x81

Display i = '25 Einheiten'
Sending Complete
Oct 27 20:24:12.013: ISDN BR0/0/0 Q931: RX <- FACILITY pd = 8 callref = 0xA4
Facility i = 0x91A11302022DD3020122300AA1053003020119820100
Protocol Profile = Remote Operations Protocol
0xA11302022DD3020122300AA1053003020119820100
Component = Invoke component
Invoke Id = 11731
Operation = AOCDChargingUnit
Oct 27 20:24:12.165: ISDN BR0/0/0 Q931: RX <- STATUS pd = 8 callref = 0x01
Cause i = 0x82E39828 - Information element not implemented
Call State i = 0x0A
Oct 27 20:24:16.866: ISDN BR0/0/0 Q931: RX <- INFORMATION pd = 8 callref = 0xA4

Display i = '27 Einheiten'
Oct 27 20:24:16.866: ISDN BR0/0/0 Q931: TX -> INFORMATION pd = 8 callref = 0x81

Display i = '27 Einheiten'
Sending Complete
Oct 27 20:24:17.006: ISDN BR0/0/0 Q931: RX <- FACILITY pd = 8 callref = 0xA4
Facility i = 0x91A11302022DD4020122300AA105300302011B820100
Protocol Profile = Remote Operations Protocol
0xA11302022DD4020122300AA105300302011B820100
Component = Invoke component
Invoke Id = 11732
Operation = AOCDChargingUnit
Oct 27 20:24:17.118: ISDN BR0/0/0 Q931: RX <- STATUS pd = 8 callref = 0x01
Cause i = 0x82E39828 - Information element not implemented
Call State i = 0x0A
Oct 27 20:24:21.866: ISDN BR0/0/0 Q931: RX <- INFORMATION pd = 8 callref = 0xA4

Display i = '29 Einheiten'
Oct 27 20:24:21.870: ISDN BR0/0/0 Q931: TX -> INFORMATION pd = 8 callref = 0x81

Display i = '29 Einheiten'
Sending Complete
Oct 27 20:24:21.982: ISDN BR0/0/0 Q931: RX <- FACILITY pd = 8 callref = 0xA4
Facility i = 0x91A11302022DD5020122300AA105300302011D820100
Protocol Profile = Remote Operations Protocol
0xA11302022DD5020122300AA105300302011D820100
Component = Invoke component
Invoke Id = 11733
Operation = AOCDChargingUnit
Oct 27 20:24:22.118: ISDN BR0/0/0 Q931: RX <- STATUS pd = 8 callref = 0x01
Cause i = 0x82E39828 - Information element not implemented
Call State i = 0x0A
Oct 27 20:24:26.842: ISDN BR0/0/0 Q931: RX <- INFORMATION pd = 8 callref = 0xA4

Display i = '31 Einheiten'
Oct 27 20:24:26.846: ISDN BR0/0/0 Q931: TX -> INFORMATION pd = 8 callref = 0x81

Display i = '31 Einheiten'
Sending Complete
Oct 27 20:24:26.970: ISDN BR0/0/0 Q931: RX <- FACILITY pd = 8 callref = 0xA4
Facility i = 0x91A11302022DD7020122300AA105300302011F820100
Protocol Profile = Remote Operations Protocol
0xA11302022DD7020122300AA105300302011F820100
Component = Invoke component
Invoke Id = 11735
Operation = AOCDChargingUnit
Oct 27 20:24:27.026: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/0, TEI 70 c
hanged to down
Oct 27 20:24:27.026: ISDN BR0/0/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2
Oct 27 20:24:27.030: %ISDN-6-DISCONNECT: Interface BRI0/0/0:1 disconnected from
1736161831 , call lasted 79 seconds
Oct 27 20:24:27.030: %ISDN-6-DISCONNECT: Interface BRI0/0/0:2 disconnected from
016090854650 , call lasted 80 seconds
Oct 27 20:24:37.674: %MARS_NETCLK-3-CLK_TRANS: Network clock source transitioned
from priority 1 to priority 11
Oct 27 20:24:37.678: ISDN BR0/0/0 Q931: L3_ShutDown: Shutting down ISDN Layer 3
Oct 27 20:24:37.730: %LINK-3-UPDOWN: Interface BRI0/0/0, changed state to down


Nach 79/80 Sekunden bricht der Call zusammen. Auf den beiden Endgeräten hört man gar nichts kein Tut oder sonst was. Aber auf beiden Endgeräten läuft der Zähler für den Call weiter.

Schon mekwürdig oder ??

mfg
Henning

 

[HenningLo]

Hallo Marcus,

anbei die Konfig:


!
network-clock-participate wic 0
network-clock-select 1 BRI0/0/0
dot11 syslog
!
!
ip dhcp excluded-address 172.16.0.1 172.16.0.32
ip dhcp excluded-address 172.16.0.64 172.16.255.254
!
ip dhcp pool Phone1
host 172.16.1.1 255.255.0.0
client-identifier 0100.14a9.819f.9a
option 150 ip 172.16.0.1
default-router 172.16.0.1
client-name VoIP-Phone1
!
ip dhcp pool PhoneATA1
host 172.16.1.3 255.255.0.0
client-identifier 0100.14f2.af7a.fa
option 150 ip 172.16.0.1
default-router 172.16.0.1
client-name VoIP-PhoneATA1
!
ip dhcp pool PCs
import all
network 172.16.0.0 255.255.0.0
dns-server 62.72.64.237 62.72.64.241
default-router 172.16.0.1
lease 5
!
!
multilink bundle-name authenticated
!
!
isdn switch-type basic-net3
!
!
voice service pots
supported-language DE
fax rate disable
!
voice service voip
allow-connections h323 to h323
modem passthrough nse codec g711alaw
!
voice register dn 1
!
voice register pool 1
!
voice-card 0
!
translation-rule 10
Rule 1 ^.% 00 national national
Rule 2 ^.% 000 international international
!
!
interface BRI0/0/0
no ip address
isdn switch-type basic-net3
isdn incoming-voice voice
!
interface BRI0/0/1
no ip address
shutdown
isdn switch-type basic-net3
isdn point-to-point-setup
isdn voice-priority always
isdn incoming-voice voice
!
!
tftp-server flash00308000500.loads
tftp-server flash00308000500.bin
tftp-server flash00308000500.sbn
tftp-server flash00308000500.sb2
tftp-server flash:ATA030203SCCP051201A.zup
!
!
voice-port 0/0/0
translate calling 10
compand-type a-law
cptone DE
bearer-cap Speech
!
voice-port 0/0/1
compand-type a-law
cptone DE
!
!
dial-peer voice 1 pots
destination-pattern 0T
incoming called-number .
fax rate disable
direct-inward-dial
port 0/0/0
!
dial-peer voice 2 voip
destination-pattern 557055
incoming called-number .
fax rate disable
!
!
!
!
telephony-service
no auto-reg-ephone
load 7960-7940 P00308000500
load ata ATA030203SCCP051201A.zup
max-ephones 24
max-dn 100 no-reg primary
ip source-address 172.16.0.1 port 2000
timeouts interdigit 4
timeouts busy 5
user-locale DE
network-locale DE
time-zone 28
time-format 24
date-format dd-mm-yy
keepalive 120
max-conferences 4 gain -6
transfer-system full-consult
secondary-dialtone 0
create cnf-files version-stamp 7960 Oct 15 2008 16:04:09
!
!
ephone-dn 1 dual-line
number 10
!
!
ephone-dn 2 dual-line
number 262992
!
!
ephone-dn 3 dual-line
number 262993
!
!
ephone-dn 4 dual-line
number 262994
call-forward all 0016090854650
!
!
ephone-dn 5
number 557055
!
!
ephone 1
device-security-mode none
mac-address 0014.A981.9F9A
type 7960
button 1:1 2:2 3:3 4:4
!
!
ephone 3
device-security-mode none
mac-address 0014.F2AF.7AFA
max-calls-per-button 2
type ata
button 1:2
!
!
ephone 4
device-security-mode none
mac-address 14F2.AF7A.FA01
max-calls-per-button 2
type ata
button 1:5
!

Vielleicht findest Du ja den Fehler

Vielen Dank
Henning

 

[HenningLo]

Ach was mir noch einfällt.

Bei dem Anschluß handelt es sich um ein MSN Anschluß, vielleicht ist das ja noch wichtig.

Die MSN für die umgeleitet werden soll ist die 262994.

Gruß
Henning

 

[Stom2006]

...

Test doch mal mit dem 4.2er CME

...

Gruß,
Marcus