[Problem] Ausgehener Anruf vom Softphone wird umgeleitet auf das Softphone

Sidebar Sidebar
Upgrade 3CX to v18 and get it hosted free!
J

jeschero

Neuer User
Mitglied seit
15 Mai 2016
Beiträge
12
Punkte für Reaktionen
0
Punkte
1
Hallo alle zusammen,

und zwar habe eich ein Problem mit ASterisk + FreePBX.
Wenn ich über mein Softphone nachdraußen telefonieren möchte, wird der Anruf direkt auf das Softphon umgeleitet.
Ichg weiß nicht warum und habe auch keine Umleitung eingerichtet.

Outbounding Rule:
asterisk.PNG

Log:
Code: 
[2016-10-25 10:31:46] WARNING[7302] res_pjsip_pubsub.c: No registered publish handler for event presence
[2016-10-25 10:31:46] WARNING[7302] res_pjsip_pubsub.c: No registered subscribe handler for event presence.winfo
[2016-10-25 10:31:46] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:1] Macro("PJSIP/300-00000027", "user-callerid,LIMIT,EXTERNAL,") in new stack
[2016-10-25 10:31:46] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:1] Set("PJSIP/300-00000027", "TOUCH_MONITOR=1477384306.279") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:2] Set("PJSIP/300-00000027", "AMPUSER=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:3] GotoIf("PJSIP/300-00000027", "0?report") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:4] ExecIf("PJSIP/300-00000027", "1?Set(REALCALLERIDNUM=300)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:5] Set("PJSIP/300-00000027", "AMPUSER=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:6] GotoIf("PJSIP/300-00000027", "0?limit") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:7] Set("PJSIP/300-00000027", "AMPUSERCIDNAME=Kay") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:8] GotoIf("PJSIP/300-00000027", "0?report") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:9] Set("PJSIP/300-00000027", "AMPUSERCID=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:10] Set("PJSIP/300-00000027", "__DIAL_OPTIONS=Ttr") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:11] Set("PJSIP/300-00000027", "CALLERID(all)="Kay" <300>") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:12] GotoIf("PJSIP/300-00000027", "0?limit") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:13] ExecIf("PJSIP/300-00000027", "1?Set(GROUP(concurrency_limit)=300)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:14] GosubIf("PJSIP/300-00000027", "7?sub-ccss,s,1(from-internal,)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-ccss:1] ExecIf("PJSIP/300-00000027", "0?Return()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-ccss:2] Set("PJSIP/300-00000027", "CCSS_SETUP=TRUE") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-ccss:3] GosubIf("PJSIP/300-00000027", "0?monitor_config,1(from-internal,):monitor_default,1(from-internal,)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [monitor_default@sub-ccss:1] GotoIf("PJSIP/300-00000027", "0?is_exten") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [monitor_default@sub-ccss:2] StackPop("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [monitor_default@sub-ccss:3] Return("PJSIP/300-00000027", "FALSE") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:15] ExecIf("PJSIP/300-00000027", "0?Set(CHANNEL(language)=)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:16] GotoIf("PJSIP/300-00000027", "1?continue") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-user-callerid,s,30)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:30] Set("PJSIP/300-00000027", "CALLERID(number)=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:31] Set("PJSIP/300-00000027", "CALLERID(name)=Kay") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:32] Set("PJSIP/300-00000027", "CDR(cnum)=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:33] Set("PJSIP/300-00000027", "CDR(cnam)=Kay") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:34] Set("PJSIP/300-00000027", "CHANNEL(language)=en") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:2] Gosub("PJSIP/300-00000027", "sub-record-check,s,1(out,+49{Telefonnummer Extern},dontcare)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:1] GotoIf("PJSIP/300-00000027", "0?initialized") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:2] Set("PJSIP/300-00000027", "__REC_STATUS=INITIALIZED") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:3] Set("PJSIP/300-00000027", "NOW=1477384307") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:4] Set("PJSIP/300-00000027", "__DAY=25") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:5] Set("PJSIP/300-00000027", "__MONTH=10") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:6] Set("PJSIP/300-00000027", "__YEAR=2016") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:7] Set("PJSIP/300-00000027", "__TIMESTR=20161025-103147") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:8] Set("PJSIP/300-00000027", "__FROMEXTEN=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:9] Set("PJSIP/300-00000027", "__MON_FMT=wav") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:10] NoOp("PJSIP/300-00000027", "Recordings initialized") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:11] ExecIf("PJSIP/300-00000027", "0?Set(ARG3=dontcare)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:12] Set("PJSIP/300-00000027", "REC_POLICY_MODE_SAVE=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:13] ExecIf("PJSIP/300-00000027", "0?Set(REC_STATUS=NO)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:14] GotoIf("PJSIP/300-00000027", "3?checkaction") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-record-check,s,17)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:17] GotoIf("PJSIP/300-00000027", "1?sub-record-check,out,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-record-check,out,1)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [out@sub-record-check:1] NoOp("PJSIP/300-00000027", "Outbound Recording Check from 300 to +49{Telefonnummer Extern}") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [out@sub-record-check:2] Set("PJSIP/300-00000027", "RECMODE=dontcare") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [out@sub-record-check:3] ExecIf("PJSIP/300-00000027", "1?Goto(routewins)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-record-check,out,7)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [out@sub-record-check:7] Gosub("PJSIP/300-00000027", "recordcheck,1(dontcare,out,+49{Telefonnummer Extern})") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp("PJSIP/300-00000027", "Starting recording check against dontcare") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [recordcheck@sub-record-check:2] Goto("PJSIP/300-00000027", "dontcare") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [recordcheck@sub-record-check:3] Return("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [out@sub-record-check:8] Return("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:3] ExecIf("PJSIP/300-00000027", "0 ?Set(CDR(accountcode)=)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:4] Set("PJSIP/300-00000027", "ROUTE_CIDSAVE="Kay" <300>") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:5] Set("PJSIP/300-00000027", "MOHCLASS=default") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:6] ExecIf("PJSIP/300-00000027", "1?Set(TRUNKCIDOVERRIDE="Kay Jeschonneck" <04074041501>)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:7] Set("PJSIP/300-00000027", "_NODEST=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:8] Macro("PJSIP/300-00000027", "dialout-trunk,1,+49{Telefonnummer Extern},,off") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:1] Set("PJSIP/300-00000027", "DIAL_TRUNK=1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:2] GosubIf("PJSIP/300-00000027", "0?sub-pincheck,s,1()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:3] GotoIf("PJSIP/300-00000027", "0?disabletrunk,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:4] Set("PJSIP/300-00000027", "DIAL_NUMBER=+49{Telefonnummer Extern}") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:5] Set("PJSIP/300-00000027", "DIAL_TRUNK_OPTIONS=Ttr") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:6] Set("PJSIP/300-00000027", "OUTBOUND_GROUP=OUT_1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:7] GotoIf("PJSIP/300-00000027", "0?nomax") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:8] GotoIf("PJSIP/300-00000027", "0?chanfull") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:9] GotoIf("PJSIP/300-00000027", "0?skipoutcid") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:10] Set("PJSIP/300-00000027", "DIAL_TRUNK_OPTIONS=Tt") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:11] Macro("PJSIP/300-00000027", "outbound-callerid,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:1] ExecIf("PJSIP/300-00000027", "0?Set(CALLERPRES()=)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:2] ExecIf("PJSIP/300-00000027", "0?Set(REALCALLERIDNUM=300)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:3] GotoIf("PJSIP/300-00000027", "1?normcid") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-outbound-callerid,s,6)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:6] Set("PJSIP/300-00000027", "USEROUTCID=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:7] Set("PJSIP/300-00000027", "EMERGENCYCID=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:8] Set("PJSIP/300-00000027", "TRUNKOUTCID=04074041501") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:9] GotoIf("PJSIP/300-00000027", "1?trunkcid") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-outbound-callerid,s,14)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:14] ExecIf("PJSIP/300-00000027", "1?Set(CALLERID(all)=04074041501)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:15] ExecIf("PJSIP/300-00000027", "0?Set(CALLERID(all)=)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:16] ExecIf("PJSIP/300-00000027", "1?Set(CALLERID(all)=Kay Jeschonneck <04074041501>)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:17] ExecIf("PJSIP/300-00000027", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:18] Set("PJSIP/300-00000027", "CDR(outbound_cnum)=04074041501") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-outbound-callerid:19] Set("PJSIP/300-00000027", "CDR(outbound_cnam)=Kay Jeschonneck") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:12] GosubIf("PJSIP/300-00000027", "0?sub-flp-1,s,1()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:13] Set("PJSIP/300-00000027", "OUTNUM=+49{Telefonnummer Extern}") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:14] Set("PJSIP/300-00000027", "custom=PJSIP") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:15] ExecIf("PJSIP/300-00000027", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default)Tt)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:16] ExecIf("PJSIP/300-00000027", "0?Set(DIAL_TRUNK_OPTIONS=TtM(confirm))") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:17] Macro("PJSIP/300-00000027", "dialout-trunk-predial-hook,") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:18] GotoIf("PJSIP/300-00000027", "0?bypass,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:19] ExecIf("PJSIP/300-00000027", "1?Set(CONNECTEDLINE(num,i)=+49{Telefonnummer Extern})") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:20] ExecIf("PJSIP/300-00000027", "1?Set(CONNECTEDLINE(name,i)=CID:04074041501)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:21] GotoIf("PJSIP/300-00000027", "0?customtrunk") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:22] Dial("PJSIP/300-00000027", "PJSIP/+49{Telefonnummer Extern}@Telekom,300,Tt") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] app_dial.c: Called PJSIP/+49{Telefonnummer Extern}@Telekom
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] app_dial.c: Everyone is busy/congested at this time (1:0/0/1)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:23] NoOp("PJSIP/300-00000027", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 21") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-trunk:24] GotoIf("PJSIP/300-00000027", "0?continue,1:s-CHANUNAVAIL,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set("PJSIP/300-00000027", "RC=21") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto("PJSIP/300-00000027", "21,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-dialout-trunk,21,1)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [21@macro-dialout-trunk:1] Goto("PJSIP/300-00000027", "continue,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-dialout-trunk,continue,1)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [continue@macro-dialout-trunk:1] NoOp("PJSIP/300-00000027", "TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 21 - failing through to other trunks") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [continue@macro-dialout-trunk:2] Set("PJSIP/300-00000027", "CALLERID(number)=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:9] Set("PJSIP/300-00000027", "CALLERID(all)="Kay" <300>") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:10] Set("PJSIP/300-00000027", "_KEEPCID=TRUE") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [+49{Telefonnummer Extern}@from-internal:11] Goto("PJSIP/300-00000027", "from-did-direct,300,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (from-did-direct,300,1)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [300@from-did-direct:1] GotoIf("PJSIP/300-00000027", "1?ext-local,300,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (ext-local,300,1)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [300@ext-local:1] Set("PJSIP/300-00000027", "__RINGTIMER=15") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [300@ext-local:2] Macro("PJSIP/300-00000027", "exten-vm,300,300,0,0,0") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:1] Macro("PJSIP/300-00000027", "user-callerid,") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:1] Set("PJSIP/300-00000027", "TOUCH_MONITOR=1477384306.279") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:2] Set("PJSIP/300-00000027", "AMPUSER=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:3] GotoIf("PJSIP/300-00000027", "3?report") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-user-callerid,s,16)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:16] GotoIf("PJSIP/300-00000027", "0?continue") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:17] ExecIf("PJSIP/300-00000027", "1?Set(__CALLEE_ACCOUNCODE=)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:18] Set("PJSIP/300-00000027", "__TTL=64") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:19] GotoIf("PJSIP/300-00000027", "1?continue") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-user-callerid,s,30)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:30] Set("PJSIP/300-00000027", "CALLERID(number)=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:31] Set("PJSIP/300-00000027", "CALLERID(name)=Kay") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:32] Set("PJSIP/300-00000027", "CDR(cnum)=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:33] Set("PJSIP/300-00000027", "CDR(cnam)=Kay") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:34] Set("PJSIP/300-00000027", "CHANNEL(language)=en") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:2] Set("PJSIP/300-00000027", "RingGroupMethod=none") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:3] Set("PJSIP/300-00000027", "__EXTTOCALL=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:4] Set("PJSIP/300-00000027", "__PICKUPMARK=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:5] Set("PJSIP/300-00000027", "RT=15") in new stack
[2016-10-25 10:31:47] WARNING[7308][C-00000013] chan_sip.c: This function can only be used on SIP channels.
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:6] ExecIf("PJSIP/300-00000027", "0?Macro(vm,300,DIRECTDIAL,)") in new stack
[2016-10-25 10:31:47] WARNING[7308][C-00000013] chan_sip.c: This function can only be used on SIP channels.
[2016-10-25 10:31:47] WARNING[7308][C-00000013] chan_sip.c: This function can only be used on SIP channels.
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:7] ExecIf("PJSIP/300-00000027", "0?MacroExit()") in new stack
[2016-10-25 10:31:47] WARNING[7308][C-00000013] chan_sip.c: This function can only be used on SIP channels.
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:8] Gosub("PJSIP/300-00000027", "sub-record-check,s,1(exten,300,dontcare)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:1] GotoIf("PJSIP/300-00000027", "3?initialized") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-record-check,s,10)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:10] NoOp("PJSIP/300-00000027", "Recordings initialized") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:11] ExecIf("PJSIP/300-00000027", "0?Set(ARG3=dontcare)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:12] Set("PJSIP/300-00000027", "REC_POLICY_MODE_SAVE=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:13] ExecIf("PJSIP/300-00000027", "0?Set(REC_STATUS=NO)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:14] GotoIf("PJSIP/300-00000027", "5?checkaction") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-record-check,s,17)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-record-check:17] GotoIf("PJSIP/300-00000027", "1?sub-record-check,exten,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-record-check,exten,1)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:1] NoOp("PJSIP/300-00000027", "Exten Recording Check between 300 and 300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:2] Set("PJSIP/300-00000027", "CALLTYPE=internal") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:3] ExecIf("PJSIP/300-00000027", "0?Set(CALLTYPE=)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:4] Set("PJSIP/300-00000027", "CALLEE=dontcare") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:5] ExecIf("PJSIP/300-00000027", "0?Set(CALLEE=dontcare)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:6] GotoIf("PJSIP/300-00000027", "0?callee") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:7] GotoIf("PJSIP/300-00000027", "1?caller") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-record-check,exten,13)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:13] Set("PJSIP/300-00000027", "RECMODE=dontcare") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:14] ExecIf("PJSIP/300-00000027", "0?Set(RECMODE=dontcare)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:15] ExecIf("PJSIP/300-00000027", "1?Set(RECMODE=dontcare)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:16] Gosub("PJSIP/300-00000027", "recordcheck,1(dontcare,internal,300)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [recordcheck@sub-record-check:1] NoOp("PJSIP/300-00000027", "Starting recording check against dontcare") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [recordcheck@sub-record-check:2] Goto("PJSIP/300-00000027", "dontcare") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-record-check,recordcheck,3)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [recordcheck@sub-record-check:3] Return("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [exten@sub-record-check:17] Return("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:9] GotoIf("PJSIP/300-00000027", "1?macrodial") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-exten-vm,s,15)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:15] GosubIf("PJSIP/300-00000027", "0?clrheader,1()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:16] Macro("PJSIP/300-00000027", "dial-one,15,Ttr,300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:1] Set("PJSIP/300-00000027", "DEXTEN=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:2] Set("PJSIP/300-00000027", "DIALSTATUS_CW=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:3] GosubIf("PJSIP/300-00000027", "0?screen,1()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:4] GosubIf("PJSIP/300-00000027", "0?cf,1()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:5] GotoIf("PJSIP/300-00000027", "1?skip1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-dial-one,s,8)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:8] GotoIf("PJSIP/300-00000027", "0?nodial") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:9] GotoIf("PJSIP/300-00000027", "0?continue") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:10] Set("PJSIP/300-00000027", "EXTHASCW=ENABLED") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:11] GotoIf("PJSIP/300-00000027", "0?next1:cwinusebusy") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-dial-one,s,23)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:23] GotoIf("PJSIP/300-00000027", "1?next3:continue") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-dial-one,s,24)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:24] ExecIf("PJSIP/300-00000027", "0?Set(DIALSTATUS_CW=BUSY)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:25] GotoIf("PJSIP/300-00000027", "0?nodial") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:26] GosubIf("PJSIP/300-00000027", "1?dstring,1():dlocal,1()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:1] Set("PJSIP/300-00000027", "DSTRING=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:2] Set("PJSIP/300-00000027", "DEVICES=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:3] ExecIf("PJSIP/300-00000027", "0?Return()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:4] ExecIf("PJSIP/300-00000027", "0?Set(DEVICES=00)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:5] Set("PJSIP/300-00000027", "LOOPCNT=1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:6] Set("PJSIP/300-00000027", "ITER=1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:7] Set("PJSIP/300-00000027", "THISDIAL=PJSIP/300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:8] GosubIf("PJSIP/300-00000027", "1?zap2dahdi,1()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:1] ExecIf("PJSIP/300-00000027", "0?Return()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:2] Set("PJSIP/300-00000027", "NEWDIAL=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:3] Set("PJSIP/300-00000027", "LOOPCNT2=1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:4] Set("PJSIP/300-00000027", "ITER2=1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:5] Set("PJSIP/300-00000027", "THISPART2=PJSIP/300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:6] ExecIf("PJSIP/300-00000027", "0?Set(THISPART2=DAHDIIP/300)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:7] Set("PJSIP/300-00000027", "NEWDIAL=PJSIP/300&") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:8] Set("PJSIP/300-00000027", "ITER2=2") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:9] GotoIf("PJSIP/300-00000027", "0?begin2") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:10] Set("PJSIP/300-00000027", "THISDIAL=PJSIP/300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [zap2dahdi@macro-dial-one:11] Return("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:9] GotoIf("PJSIP/300-00000027", "0?doset") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:10] NoOp("PJSIP/300-00000027", "Debug: Found PJSIP Destination PJSIP/300, updating with PJSIP_DIAL_CONTACTS") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:11] Set("PJSIP/300-00000027", "THISDIAL=PJSIP/300/sip:[email protected]:43453;rinstance=25208d069922ca4d") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:12] GotoIf("PJSIP/300-00000027", "0?skipset") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:13] Set("PJSIP/300-00000027", "DSTRING=PJSIP/300/sip:[email protected]:43453;rinstance=25208d069922ca4d&") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:14] Set("PJSIP/300-00000027", "ITER=2") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:15] GotoIf("PJSIP/300-00000027", "0?begin") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:16] ExecIf("PJSIP/300-00000027", "0?Return()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:17] Set("PJSIP/300-00000027", "DSTRING=PJSIP/300/sip:[email protected]:43453;rinstance=25208d069922ca4d") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [dstring@macro-dial-one:18] Return("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:27] GotoIf("PJSIP/300-00000027", "0?nodial") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:28] GotoIf("PJSIP/300-00000027", "0?skiptrace") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:29] GosubIf("PJSIP/300-00000027", "1?ctset,1():ctclear,1()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [ctset@macro-dial-one:1] Set("PJSIP/300-00000027", "DB(CALLTRACE/300)=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [ctset@macro-dial-one:2] Return("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:30] Set("PJSIP/300-00000027", "D_OPTIONS=Ttr") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:31] ExecIf("PJSIP/300-00000027", "0?SIPAddHeader(Alert-Info: )") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:32] ExecIf("PJSIP/300-00000027", "0?SIPAddHeader()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:33] ExecIf("PJSIP/300-00000027", "1?Set(CHANNEL(musicclass)=default)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:34] GosubIf("PJSIP/300-00000027", "0?qwait,1()") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:35] Set("PJSIP/300-00000027", "__CWIGNORE=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:36] Set("PJSIP/300-00000027", "__KEEPCID=TRUE") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:37] GotoIf("PJSIP/300-00000027", "0?usegoto,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:38] GotoIf("PJSIP/300-00000027", "0?godial") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:39] Gosub("PJSIP/300-00000027", "sub-presencestate-display,s,1(300)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@sub-presencestate-display:1] Goto("PJSIP/300-00000027", "state-not_set,1") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (sub-presencestate-display,state-not_set,1)
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [state-not_set@sub-presencestate-display:1] Set("PJSIP/300-00000027", "PRESENCESTATE_DISPLAY=") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [state-not_set@sub-presencestate-display:2] Return("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:40] Set("PJSIP/300-00000027", "CONNECTEDLINE(name,i)=Kay") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:41] Set("PJSIP/300-00000027", "CONNECTEDLINE(num)=300") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:42] Set("PJSIP/300-00000027", "D_OPTIONS=TtrI") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:43] Macro("PJSIP/300-00000027", "dialout-one-predial-hook,") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dialout-one-predial-hook:1] MacroExit("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:44] ExecIf("PJSIP/300-00000027", "0?Set(D_OPTIONS=trII)") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:45] Dial("PJSIP/300-00000027", "PJSIP/300/sip:[email protected]:43453;rinstance=25208d069922ca4d,15,TtrI") in new stack
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] app_dial.c: Called PJSIP/300/sip:[email protected]:43453;rinstance=25208d069922ca4d
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] app_dial.c: Connected line update to PJSIP/300-00000027 prevented.
[2016-10-25 10:31:47] VERBOSE[7308][C-00000013] app_dial.c: PJSIP/300-00000029 is ringing
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] app_dial.c: Everyone is busy/congested at this time (1:1/0/0)
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:46] ExecIf("PJSIP/300-00000027", "0?MacroExit()") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:47] ExecIf("PJSIP/300-00000027", "0?Set(DIALSTATUS=)") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:48] GosubIf("PJSIP/300-00000027", "0?s-BUSY,1()") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-dial-one:49] MacroExit("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:17] Set("PJSIP/300-00000027", "SV_DIALSTATUS=BUSY") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:18] GosubIf("PJSIP/300-00000027", "0?docfu,1()") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:19] GosubIf("PJSIP/300-00000027", "0?docfb,1()") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:20] Set("PJSIP/300-00000027", "DIALSTATUS=BUSY") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:21] ExecIf("PJSIP/300-00000027", "0?MacroExit()") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:22] GotoIf("PJSIP/300-00000027", "0?s-BUSY,1") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-exten-vm:23] Macro("PJSIP/300-00000027", "vm,300,BUSY,") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-vm:1] Macro("PJSIP/300-00000027", "user-callerid,SKIPTTL") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:1] Set("PJSIP/300-00000027", "TOUCH_MONITOR=1477384306.279") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:2] Set("PJSIP/300-00000027", "AMPUSER=300") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:3] GotoIf("PJSIP/300-00000027", "3?report") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-user-callerid,s,16)
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:16] GotoIf("PJSIP/300-00000027", "1?continue") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-user-callerid,s,30)
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:30] Set("PJSIP/300-00000027", "CALLERID(number)=300") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:31] Set("PJSIP/300-00000027", "CALLERID(name)=Kay") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:32] Set("PJSIP/300-00000027", "CDR(cnum)=300") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:33] Set("PJSIP/300-00000027", "CDR(cnam)=Kay") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-user-callerid:34] Set("PJSIP/300-00000027", "CHANNEL(language)=en") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-vm:2] Set("PJSIP/300-00000027", "VMGAIN=") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-vm:3] Macro("PJSIP/300-00000027", "blkvm-check,") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-blkvm-check:1] Set("PJSIP/300-00000027", "GOSUB_RETVAL=") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-blkvm-check:2] ExecIf("PJSIP/300-00000027", "0?Set(GOSUB_RETVAL=TRUE)") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-blkvm-check:3] MacroExit("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-vm:4] GotoIf("PJSIP/300-00000027", "1?vmx,1") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-vm,vmx,1)
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:1] Set("PJSIP/300-00000027", "MEXTEN=300") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:2] Set("PJSIP/300-00000027", "MMODE=BUSY") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:3] Set("PJSIP/300-00000027", "RETVM=") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:4] Set("PJSIP/300-00000027", "MODE=busy") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:5] Macro("PJSIP/300-00000027", "get-vmcontext,300") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-get-vmcontext:1] Set("PJSIP/300-00000027", "VMCONTEXT=default") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-get-vmcontext:2] GotoIf("PJSIP/300-00000027", "0?200:300") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-get-vmcontext,s,300)
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-get-vmcontext:300] NoOp("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:6] Set("PJSIP/300-00000027", "MODE=busy") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:7] NoOp("PJSIP/300-00000027", "MODE IS: busy") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:8] GotoIf("PJSIP/300-00000027", "1?chknomsg") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-vm,vmx,10)
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:10] GotoIf("PJSIP/300-00000027", "0?s-BUSY,1") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:11] GotoIf("PJSIP/300-00000027", "1?notdirect") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-vm,vmx,13)
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:13] NoOp("PJSIP/300-00000027", "Checking if ext 300 is enabled: ") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [vmx@macro-vm:14] GotoIf("PJSIP/300-00000027", "1?s-BUSY,1") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-vm,s-BUSY,1)
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s-BUSY@macro-vm:1] NoOp("PJSIP/300-00000027", "BUSY voicemail") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s-BUSY@macro-vm:2] Macro("PJSIP/300-00000027", "get-vmcontext,300") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-get-vmcontext:1] Set("PJSIP/300-00000027", "VMCONTEXT=default") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-get-vmcontext:2] GotoIf("PJSIP/300-00000027", "0?200:300") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-get-vmcontext,s,300)
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-get-vmcontext:300] NoOp("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] pbx.c: Executing [s-BUSY@macro-vm:3] VoiceMail("PJSIP/300-00000027", "300@default,b") in new stack
[2016-10-25 10:31:50] WARNING[7302] res_pjsip_pubsub.c: No registered publish handler for event presence
[2016-10-25 10:31:50] WARNING[5591] res_pjsip_pubsub.c: No registered subscribe handler for event presence.winfo
[2016-10-25 10:31:50] VERBOSE[7308][C-00000013] file.c: <PJSIP/300-00000027> Playing 'vm-theperson.ulaw' (language 'en')
[2016-10-25 10:31:50] WARNING[5591] res_pjsip_pubsub.c: No registered publish handler for event presence
[2016-10-25 10:31:50] WARNING[5591] res_pjsip_pubsub.c: No registered subscribe handler for event presence.winfo
[2016-10-25 10:31:51] VERBOSE[7308][C-00000013] app_macro.c: Spawn extension (macro-vm, s-BUSY, 3) exited non-zero on 'PJSIP/300-00000027' in macro 'vm'
[2016-10-25 10:31:51] VERBOSE[7308][C-00000013] app_macro.c: Spawn extension (macro-exten-vm, s, 23) exited non-zero on 'PJSIP/300-00000027' in macro 'exten-vm'
[2016-10-25 10:31:51] VERBOSE[7308][C-00000013] pbx.c: Spawn extension (ext-local, 300, 2) exited non-zero on 'PJSIP/300-00000027'
[2016-10-25 10:31:51] VERBOSE[7308][C-00000013] pbx.c: Executing [h@ext-local:1] Macro("PJSIP/300-00000027", "hangupcall,") in new stack
[2016-10-25 10:31:51] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-hangupcall:1] GotoIf("PJSIP/300-00000027", "1?theend") in new stack
[2016-10-25 10:31:51] VERBOSE[7308][C-00000013] pbx_builtins.c: Goto (macro-hangupcall,s,3)
[2016-10-25 10:31:51] VERBOSE[7308][C-00000013] pbx.c: Executing [s@macro-hangupcall:3] Hangup("PJSIP/300-00000027", "") in new stack
[2016-10-25 10:31:51] VERBOSE[7308][C-00000013] app_macro.c: Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'PJSIP/300-00000027' in macro 'hangupcall'
[2016-10-25 10:31:51] VERBOSE[7308][C-00000013] pbx.c: Spawn extension (ext-local, h, 1) exited non-zero on 'PJSIP/300-00000027'
[2016-10-25 10:31:54] WARNING[5591] res_pjsip_pubsub.c: No registered publish handler for event presence
[2016-10-25 10:31:54] WARNING[5591] res_pjsip_pubsub.c: No registered subscribe handler for event presence.winfo
Wenn weitere Information Benötigten werden, einfach Fragen,
Und schonmal danke für jede Hilfe
 

Anhänge

  • asterisk.PNG
    asterisk.PNG
    41.7 KB · Aufrufe: 3
Du hast das so eingestellt. Wenn du deinen Screenshot betrachtest hast du im Falle von "Congestion" das Rufziel 300 eingestellt.

Im Anrufversuch sichtbar, dass der Telekomchannel unavail ist und mit Hangupcause 21 beendet wird. Dann greift dein Congestion und die 300 (dein Softphone) wird angewählt.
 
Ok, danke. Habe es jetzt auf "Normale Congestion" geändert.
Jetzt wird mir aber erzählt, das es "busy" ist, reintelefonieren kann ich.
Woran kann das liegen, bzw. was muss ich ändern?
 
Zuletzt bearbeitet:
Um antworten zu können musst du eingeloggt sein.

Zurzeit aktive Besucher

Gesamt: 595 (Mitglieder: 17, Gäste: 578)

Neueste Beiträge

Statistik des Forums

Themen
246,201
Beiträge
2,247,954
Mitglieder
373,765
Neuestes Mitglied
walterronald99
Holen Sie sich 3CX - völlig kostenlos!
Verbinden Sie Ihr Team und Ihre Kunden Telefonie Livechat Videokonferenzen

Gehostet oder selbst-verwaltet. Für bis zu 10 Nutzer dauerhaft kostenlos. Keine Kreditkartendetails erforderlich. Ohne Risiko testen.

3CX
Für diese E-Mail-Adresse besteht bereits ein 3CX-Konto. Sie werden zum Kundenportal weitergeleitet, wo Sie sich anmelden oder Ihr Passwort zurücksetzen können, falls Sie dieses vergessen haben.
Ihr E-Mail-Adresse verifizieren

Ihr E-Mail-Adresse verifizieren

Wir haben Ihnen eine E-Mail geschickt. Klicken Sie auf die Schaltfläche im E-Mail-Text, um Ihre E-Mail-Adresse zu verifizieren – (Können Sie diese nicht finden können, dann überprüfen Sie Ihren Spam-Ordner).

IPPF im Überblick

Neueste Beiträge

Direktlinks Telefonanlage

Website-Sponsoren

3CX sponsor
KONTAKTIEREN SIE UNS BEI INTERESSE
| Style by ThemeHouse
XenPorta 2 PRO © Jason Axelrod of 8WAYRUN
Oben Unten
Zurück