Hello everyone, 7390 does not see the subscriber's number on the landline, before there was an old man 7050 and it perfectly identified all incoming numbers, German PBX but an analog line is used, Annex A was selected in the settings, I used different software versions, initially, German software was installed from the box, Annex B, now the international version of the software Annex B is installed, contacts 3 and 6 in the connector are used for connection, according to this description,
although on the old man 7050 contacts 1 and 8 were used, but in 7390 this is the ISDN group,
AVM tips were also used, but this did not help.
Is there a hardware difference between the German and international versions?, or is it possible to use some additional patch to fix this problem?
Thanks in advance!
Assignment of the cables and sockets | FRITZ!Box 7390
The FRITZ!Box has various sockets for connecting it to your DSL line and connecting your telephony devices to it. Here you will find the assignment of the cables included with delivery as well as of the FRITZ!Box's sockets so you can use your own cables, for example. Note:The FRITZ!Box is...
en.avm.de
AVM tips were also used, but this did not help.
Caller ID is not shown for incoming calls | FRITZ!Box 7390
Caller ID is not shown for incoming calls: When you receive calls, a telephone connected to the FRITZ!Box does not show the caller's telephone number (caller ID), or the caller's telephone number is only shown briefly in its display. A telephone does not show which telephone number the caller...
en.avm.de
The name of the caller is not displayed for incoming calls | FRITZ!Box 7390
Although the caller is entered in the FRITZ!Box telephone book, only the caller ID or an incorrect name is displayed for a caller when an incoming call is received.
en.avm.de
Thanks in advance!