7270 freetz and Remote Access?

[vpe]

Hello,

i try 7270 & latest freetz and try AVM Remote Access - after browser read SSL certificate from FBF, then get err and not accessible SSL Remote access and not work normal http access to, until reboot...

How i make wrong please?

 

[vpe]

I talk about: Permit Access / Remote Access

--------------------
Here you can enable secure remote administration for your FRITZ!Box.
Remote access is performed using HTTPS and is thus protected by means of a user name and a password.
Enable remote access
--------------------

no idea? Or nobody use freetz and AVM HTTPS (SSL) Access ???

Without freetz, i never see problem with SSL Access into 7270, 7170...

 

[The Brad]

The replacement of AVM's openssl-libs by freetz leads to reboots of the box when trying to access the box from remote. Make sure the openssl-libs are not replaced either by not choosing packages which replace the openssl-libs or try to build thoses packages statically (can be chosen in menuconfig for a lot of packages). The remote access will work, if the following is NOT set in your .config file

FREETZ_LIB_libcrypto=y
FREETZ_LIB_libssl=y

Maybe you have to run

make config-clean-deps

after the deselection of those packages.

Details can be found here (unfortunately in German).

Brad

 

[vpe]

Thx., then i must set

FREETZ_LIB_libcrypto=n
FREETZ_LIB_libssl=n

or

#FREETZ_LIB_libcrypto not set
#FREETZ_LIB_libssl not set

thx...

 

[sf3978]

What is the output of find / -iname 'libcrypto*' ?

root@fritz:/var/mod/root# find / -iname 'libcrypto*'
[COLOR="Red"]/lib[/COLOR]/libcrypto.so
/lib/libcrypto.so.0.9.8
/lib/libcrypto.so.1

[COLOR="Red"]/usr/lib/freetz[/COLOR]/libcrypto.so
/usr/lib/freetz/libcrypto.so.0.9.8