Suchergebnisse

When I tried to build the image with latest Freetz-trunck 3606, I got the following error message: What could be the problem? I put my .config file in the attachment.

Thank you for your comments and sharing your configuration! I will take a deep look on it and try again. BTW, you are using English version Firmware now as you describe in your signature. Does it have the same functions as the German version?

Thank you for the quick reply! I know some people use FBF 7170 and Transmission. I was wondering whether Transmission could be integrated in the image for 7170. If you say it is not possible because the flash is too small, then I will try the methods you suggested. Thanks!

I wanted to install Transmission in my FBF 7170 but failed. First, I downloaded the latest Freetz Trunk, and then set the menuconfig. When I tried compile the image, it alway gave me an error message: the kernel image is too large. I tried several times with different setting and at the end...

Thanks a lot for your explanation! It is clear to me now.

FBF callmonitor couldn't run on my computer. Therefore I installed JFritz. It runs smoothly, but I found something strange. I am not sure whether I understood correctly or not: JFritz can not fetch the phone book from Fritz box and can not push it to Fritz box as well. Is it true? At my case...

@Ernest015 Thanks a lot for your kind explanation!

Do I have to re-build image with Speed-2-Fritz script every time to update new AVM Firmware? Then I can use Web-GUI to update the Firmware with new-built image? Do I understand correctly? Thank you in advance for your kind help!

Thank you very much for your answer! Apparently I must live with it. By the way, currently I am living in Germany. Is it legal to 'falsify' the number here?

I have two VOIP accounts, one from 1&1 and one from nonoh (Betamax). From 1&1 I have a telephone number which is my main number, and from nonoh I have no number. Now I have set in FBF7170 that all call-out are through nonoh VOIP because the price is lower. But then people who get my call...

Thank you for the explanation. The point is that in both cases the PC can access the internet. It seems that the Box works with "LAN1" although its serial number is in the "forbidden" range.

Another test with same hardware setting as above, but use the following setting in the 2nd 7170 (see picture): - Internetzugang über LAN 1 - Internetverbindung selbst aufbauen (NAT-Router mit PPPoE oder IP) - Zugangsdaten werden nicht benötigt (IP) - IP-Adresse manuell festlegenIP-Adresse...

I did a test on it: 1st 7170 connect to DSL, 2nd 7170 connect to PC via LAN3, 2nd 7170 connect to 1st 7170 via LAN1. I had following setting on the 2nd 7170(see the picture): - Internetzugang über LAN 1 - Vorhandene Internetverbindung im Netzwerk mitbenutzen (IP-Client) - IP-Adresse...

I have a FB7170 V1 with serial number 228.00.038.929, which is within the "forbidden" range. But I still can see the "LAN1" full option. However I could not test whether it works or not. When I connected it behind another 7170, even I did not set "LAN1", the PC connected to the second 7170 could...

Aus einer Vertragsverlängerung vom 21.10.2008 habe ich hier den neuen aktuellen Home Server von AVM. unbenutzt. Ich habe den Karton nur geöffnet um nachzuschauen ob der Lieferumfang vollzählig ist. FRITZ!Box Fon WLAN 7270 Lieferumfang: Telefonanlage für Internettelefonie und Festnetz...

I doubt that it will work. As I described in the first post, I reloaded AVM firmware after observing the problem, but it didn't help. :confused:

Thanks, Oliver! Do you mean it worked last time when you enabled the libavmhmac? Do you know what these error messages mean? Are there any other ways to do the remote management? Will the AVM Recovery bring the remote management back?

I have installed the new Freetz Firmware-Version 29.04.63freetz-devel-2527 with libavmhmac enabled. However I still can not access the FBF remotely either via https or SSH. Here is the log of ctlmgr -fv. Could anyone see what is the problem? Thank you! /var/mod/root # ctlmgr -fv /var/mod/root...

Thanks for the quick reply! It sounds good with libavmhmac. Now I am curious why Freetz does not use libavmhmac as default. Are there any drawbacks with it?

I guess I have the same problem, but I will check it with "ctlmgr -fv". So the reason is that some original AVM Libs was replaced by openssl-Libs while installing Freetz, isn't it? If I activate the "libavmhmac" in Freetz, then the original AVM Libs will be loaded back and the remote...