Suchergebnisse

Ich habe vor einige Monate ein Internationale Fritz!Box 7140 Annex A gekauft und kann leider noch immer nicht Problemlos telefonieren. Zuerst: Mit firmware 39.04.34 hätte ich ungefähr 5 bis 10 mal pro Tag ein Fehler: "Internet Connection cleared". Im nacht, aber auch in mitte eines...

After the conversion I've tried many times to get Caller ID on my telephone, but it seems to be a problem. My telephone provider (the analogue line) delivers a DTMF signal, where Fritz!Box delivers it in FSK. The international version of the Fritz!Box should understand both DTMF and FSK and send...

Eureka!!! I made it!!! What was the point? I used an own network cable to connect pc with the Box... I had to use the original RED CABLE!! (Thanks ukman!!!) First I recovered with the original German firmware, then I used the adam2 loader to set the parameters. With my own pc, no problem...

I refuse to give up! But when I type: c:\>recover -f fritz.box_fon_wlan.08.04.15.image I get the messages: recover: Firmware von fritz.box_fon_wlan.08.04.15.image geladen recover: Suche Fritz!Box ... recover: Keine Fritz!Box gefunden recover: error = 1 PC does not see the box...

Again I've tried to connect. No show anyway. Then I put al my hope on Total Commander, but I couldn't get a connection either... I've also started Windows XP in safe mode so there were no unuseful programs loaded, but nothing happened. What should I do now? Recover to a (which?) German file...

It's in a working condition, art.nr. 2000 1666, now Annex A, firmware 08.04.15 I can only ping 192.168.178.1 (not 192.168.178.2). I have tried Sirkubax' method (recovery file with English firmware), but it didn't work out. Also, your way of converting looks a little bit safer to me... I...

Maybe it's because of the time (I'm already trying 10 hours right now) but I guess I mess up with the IP addresses. I see 192.168.178.1 (I can reach the box with this IP, 192.168.178.2 (?), 192.168.178.10 (IP address of LAN adapter), 192.168.178.20 (annex_ptest_host value (?)), 192.168.178.254...

Thanks telefonicus! When I tried to ftp the box, I couldn't get the login prompt. I disabled anti-virus and firewall, filled in the IP adresses at the "properties for Internet Protocol (TCP/IP)"- menu, connected with LAN, shut down Fritz!DSL start Center and tried at least 25 times to get the...

Is this still the ultimate way to convert a German box to an international box? I also read this: http://www.ip-phone-forum.de/showpost.php?p=691966&postcount=173 If the way as described above is still the right way, is there a new script file available?