Hi,
ich habe freetz 9248 auf der 7390 am laufen. Mit der folgenden Config:
Das Problem ist, dass nach einem Neustart, oder nach einiger Zeit der USB Stick nur noch als Read Only gemountet wird. Ich muss dann manuell auf Write Accesses clicken, damit ich wieder Schreibzugriff habe.
Im Mountlog steht nichts auffälliges:
Kann einer sagen, was das Problem ist?
ich habe freetz 9248 auf der 7390 am laufen. Mit der folgenden Config:
Code:
FREETZ_HAVE_DOT_CONFIG=y
FREETZ_AVM_VERSION_7390_05_21=y
FREETZ_AVM_VERSION_05_2X=y
FREETZ_TYPE_FON_WLAN_7390=y
FREETZ_TYPE_LANG_DE=y
FREETZ_TYPE_LANGUAGE="de"
FREETZ_AVM_VERSION_STRING="7390_05.21"
FREETZ_FILESYSTEM_MTD_SIZE=0
FREETZ_TYPE_PREFIX="7390"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_SHOW_ADVANCED=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
FREETZ_TARGET_IPV6_SUPPORT=y
FREETZ_TARGET_REF_16MB=y
FREETZ_TARGET_REF="16mb"
FREETZ_KERNEL_REF_16MB=y
FREETZ_KERNEL_REF="16mb"
FREETZ_KERNEL_MTD_SIZE=238
FREETZ_HAS_AVM_PTY_SUPPORT=y
FREETZ_HAS_AVM_AURA_USB=y
FREETZ_HAS_AVM_NTFS=y
FREETZ_HAS_AVM_IPV6=y
FREETZ_HAS_AVM_WEBDAV=y
FREETZ_HAS_AVM_INETD=y
FREETZ_HAS_AVM_EXT3=y
FREETZ_HAS_AVM_TR069=y
FREETZ_HAS_AVM_CHRONYD=y
FREETZ_HAS_AVM_DECT=y
FREETZ_HAS_AVM_OPENSSL_LIBS=y
FREETZ_HAS_AVM_LSOF=y
FREETZ_HAS_AVM_NAS=y
FREETZ_HAS_AVM_MYFRITZ=y
FREETZ_HAS_AVM_PHONE=y
FREETZ_HAS_AVM_TAM=y
FREETZ_HAS_AVM_UDEV=y
FREETZ_HAS_AVM_USB_HOST=y
FREETZ_HAS_AVM_E2FSPROGS=y
FREETZ_HAS_AVM_WLAN=y
FREETZ_HAS_AVM_UMTS=y
FREETZ_HAS_AVM_JUNK_BYTES=y
FREETZ_HAS_AVM_MULTI_ANNEX=y
FREETZ_HAS_AVM_CTLMGR_STRUCT_V3=y
FREETZ_LANG_DE=y
FREETZ_LANG_STRING="de"
FREETZ_PATCH_VCC=y
FREETZ_ADD_REGEXT_GUI=y
FREETZ_PATCH_SIGNED=y
FREETZ_PATCH_FREETZMOUNT=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
FREETZ_AUTOMOUNT_EXT3=y
FREETZ_AUTOMOUNT_FAT=y
FREETZ_AUTOMOUNT_NTFS=y
FREETZ_AUTOMOUNT_LINUXSWAP=y
FREETZ_PATCH_MAXDEVCOUNT=y
FREETZ_REMOVE_BRANDING_1und1=y
FREETZ_REMOVE_DTRACE=y
FREETZ_REMOVE_FTPD=y
FREETZ_REMOVE_HELP=y
FREETZ_AVMDAEMON_DISABLE_NTP=y
FREETZ_AVMDAEMON_DISABLE_MULTIDPORTS=y
FREETZ_AVMDAEMON_DISABLE_DNS=y
FREETZ_AVMDAEMON_DISABLE_DHCP=y
FREETZ_AVMDAEMON_DISABLE_LLMNR=y
FREETZ_PACKAGE_BRIDGE_UTILS=y
FREETZ_PACKAGE_CALLMONITOR=y
FREETZ_PACKAGE_CALLMONITOR_webif=y
FREETZ_PACKAGE_CALLMONITOR_actions=y
FREETZ_PACKAGE_CALLMONITOR_monitor=y
FREETZ_PACKAGE_CALLMONITOR_phonebook=y
FREETZ_PACKAGE_DNSMASQ=y
FREETZ_PACKAGE_DNSMASQ_DISABLE_DNS=y
FREETZ_PACKAGE_DNSMASQ_DISABLE_DHCP=y
FREETZ_PACKAGE_DROPBEAR=y
FREETZ_PACKAGE_DROPBEAR_SFTP_SERVER=y
FREETZ_PACKAGE_DROPBEAR_SERVER_ONLY=y
FREETZ_PACKAGE_DROPBEAR_WITH_ZLIB=y
FREETZ_PACKAGE_DROPBEAR_DISABLE_HOST_LOOKUP=y
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_INETD=y
FREETZ_PACKAGE_SAMBA=y
FREETZ_SAMBA_VERSION_3_0=y
FREETZ_PACKAGE_SAMBA_SMBD=y
FREETZ_PACKAGE_SAMBA_MAX_DEBUG_LEVEL=-1
FREETZ_PACKAGE_STUNNEL=y
FREETZ_PACKAGE_TCPDUMP=y
FREETZ_PACKAGE_TRANSMISSION=y
FREETZ_PACKAGE_TRANSMISSION_DAEMON=y
FREETZ_PACKAGE_TRANSMISSION_WEBINTERFACE=y
FREETZ_PACKAGE_VSFTPD=y
FREETZ_PACKAGE_HOL=y
FREETZ_PACKAGE_INADYN_MT=y
FREETZ_PACKAGE_OPENSSH=y
FREETZ_PACKAGE_OPENSSH_sftp_server=y
FREETZ_PACKAGE_VTUN=y
FREETZ_PACKAGE_VTUN_WITH_LZO=y
FREETZ_PACKAGE_VTUN_WITH_ZLIB=y
FREETZ_PACKAGE_VTUN_WITH_SSL=y
FREETZ_PACKAGE_VTUN_WITH_SHAPER=y
FREETZ_PACKAGE_AUTHORIZED_KEYS=y
FREETZ_PACKAGE_AVM_FIREWALL=y
FREETZ_PACKAGE_ONLINECHANGED_CGI=y
FREETZ_PACKAGE_SYSLOGD_CGI=y
FREETZ_PACKAGE_TRANSMISSION_CGI=y
FREETZ_PACKAGE_WOL_CGI=y
FREETZ_PACKAGE_MOD=y
FREETZ_PACKAGE_MOD_ETCSERVICES=y
FREETZ_PACKAGE_MODCGI=y
FREETZ_DL_KERNEL_SITE=""
FREETZ_DL_KERNEL_SOURCE="${FREETZ_AVM_VERSION_STRING}-release_kernel.tar.xz"
FREETZ_DL_KERNEL_SOURCE_MD5="2e8b43c176c1cbe9f815078109d88e61"
FREETZ_DL_SITE="@AVM/fritzbox.fon_wlan_7390/firmware/deutsch"
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7390.84.05.22.image"
FREETZ_DL_SOURCE_MD5="e7b50eec03e2fd23a2ff4b21caf7d692"
FREETZ_VERBOSITY_LEVEL=2
FREETZ_SIZEINFO_COMPRESSED=y
FREETZ_JLEVEL=2
FREETZ_CHECK_CHANGED=y
FREETZ_DL_SITE_USER=""
FREETZ_OPTIONS_ETCSERVICES=y
FREETZ_SECURITY_LEVEL=0
FREETZ_STYLE_COLORED=y
FREETZ_STYLE="colored"
FREETZ_SKIN_legacy=y
FREETZ_FAVICON_NONE=y
FREETZ_FAVICON_STRING="none"
FREETZ_TAGGING_NONE=y
FREETZ_TAGGING_STRING="none"
FREETZ_DEVELOPER_VERSION_STRING=y
FREETZ_USER_DEFINED_COMMENT=""
FREETZ_CREATE_SEPARATE_OPTIONS_CFG=y
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
FREETZ_SQUASHFS_BLOCKSIZE=65536
FREETZ_KERNEL_VERSION_2_6_28=y
FREETZ_KERNEL_VERSION="2.6.28"
FREETZ_KERNEL_VERSION_2_6_13_MIN=y
FREETZ_KERNEL_VERSION_2_6_19_MIN=y
FREETZ_KERNEL_VERSION_2_6_28_MIN=y
FREETZ_KERNEL_VERSION_2_6_28_MAX=y
FREETZ_KERNEL_VERSION_2_6_32_MAX=y
FREETZ_KERNEL_LAYOUT_IKS=y
FREETZ_KERNEL_LAYOUT="iks"
FREETZ_MODULES_KVER="2.6.28.10"
FREETZ_BUSYBOX_ETHER_WAKE=y
FREETZ_BUSYBOX_INETD=y
FREETZ_BUSYBOX_IP=y
FREETZ_BUSYBOX_FEATURE_IP_ADDRESS=y
FREETZ_BUSYBOX_FEATURE_IP_LINK=y
FREETZ_BUSYBOX_FEATURE_IP_ROUTE=y
FREETZ_BUSYBOX_FEATURE_IP_TUNNEL=y
FREETZ_BUSYBOX_MD5SUM=y
FREETZ_BUSYBOX_REALPATH=y
FREETZ_BUSYBOX_START_STOP_DAEMON=y
FREETZ_BUSYBOX_STUN_IP=y
FREETZ_BUSYBOX_TAR_OLDGNU_COMPATIBILITY=y
FREETZ_BUSYBOX_USLEEP=y
FREETZ_BUSYBOX_VOLUMEID=y
FREETZ_BUSYBOX_VOLUMEID_EXT=y
FREETZ_BUSYBOX_VOLUMEID_FAT=y
FREETZ_BUSYBOX_VOLUMEID_LINUXSWAP=y
FREETZ_BUSYBOX_VOLUMEID_NTFS=y
FREETZ_BUSYBOX_WGET=y
FREETZ_BUSYBOX_FEATURE_PREFER_IPV4_ADDRESS=y
FREETZ_LIB_libcrypto=y
FREETZ_LIB_libssl=y
FREETZ_LIB_liblzo2=y
FREETZ_LIB_libz=y
FREETZ_LIB_libpcap=y
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
FREETZ_LIB_libresolv=y
FREETZ_LIB_librt=y
FREETZ_LIB_libuClibc=y
FREETZ_LIB_libutil=y
FREETZ_LIB_libcurl=y
FREETZ_LIB_libcurl_WITH_SSL=y
FREETZ_LIB_libcurl_WITH_OPENSSL=y
FREETZ_LIB_libgcc_s=y
FREETZ_LIB_libevent=y
FREETZ_LIB_libctlmgr=y
FREETZ_LIB_libctlmgr_WITH_STRUCT_V3=y
FREETZ_LIB_libmultid=y
FREETZ_LIB_libmultid_WITH_ANYIP=y
FREETZ_LIB_libmultid_WITH_DNS=y
FREETZ_LIB_libmultid_WITH_DHCP=y
FREETZ_LIB_libmultid_WITH_LLMNR=y
FREETZ_LIB_libpopt=y
FREETZ_STRIP_BINARIES=y
FREETZ_STRIP_MODULES_FREETZ=y
FREETZ_TARGET_ARCH_BE=y
FREETZ_TARGET_ARCH="mips"
FREETZ_TARGET_CROSS="mips-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_KERNEL_CROSS="mips-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
FREETZ_DOWNLOAD_TOOLCHAIN=y
FREETZ_GCC_4_6_COMPILED_KERNEL=y
FREETZ_UCLIBC_0_9_32_BASED_BOX=y
FREETZ_KERNEL_COMPILER_GCC_4_6=y
FREETZ_KERNEL_GCC_VERSION="4.6.3"
FREETZ_KERNEL_BINUTILS_VERSION="2.22"
FREETZ_TARGET_UCLIBC_VERSION_0_9_32=y
FREETZ_TARGET_COMPILER_GCC_4_6=y
FREETZ_STDCXXLIB_USE_UCLIBCXX=y
FREETZ_TARGET_UCLIBC_VERSION="0.9.32.1"
FREETZ_TARGET_GCC_VERSION="4.6.3"
FREETZ_GNULIBSTDCXX_VERSION="6.0.16"
FREETZ_STDCXXLIB="uclibcxx"
FREETZ_TARGET_BINUTILS_VERSION="2.22"
FREETZ_TARGET_UCLIBC_REF="mod"
FREETZ_TARGET_CFLAGS="-Os -pipe -Wa,--trap"
FREETZ_TARGET_LFS=y
FREETZ_TOOLCHAIN_MINIMIZE_REQUIRED_GLIBC_VERSION=yDas Problem ist, dass nach einem Neustart, oder nach einiger Zeit der USB Stick nur noch als Read Only gemountet wird. Ich muss dann manuell auf Write Accesses clicken, damit ich wieder Schreibzugriff habe.
Im Mountlog steht nichts auffälliges:
Code:
[INFO] Mounting device /dev/sda1 ...
[INFO] Partition uStor01 (/dev/sda1) was mounted successfully (vfat)Kann einer sagen, was das Problem ist?
