Hallo,
ich versuche verzweifelt mein neues 7965 an der Fritzbox anzumelden, leider ohne Erfolg.
Zuerst stand immer nur Registering unten links im Display, nachdem ich <registerWithProxy>false</registerWithProxy> gesetzt habe steht er da wie im angehängten Bild.
Wenn ich den Hörer abhebe bekomme ich auch ein Freizeichen, allerdings sobald ich Wähle höre ich die MFT danach Stille. Nach ca 60 sec fängt das Telephon an zu piepen.
Wenn ich versuche intern per **620 das Telephon zu erreichen bekomme ich ein besetzt Zeichen. Beim Dialplan habe ich auch schon die Alternativ versucht oder ihn weg zu lassen.
SEPxxx.cfg.xml
dialplan.xml
dialplan.xml Alternative
TFTP32 Protokoll
ich versuche verzweifelt mein neues 7965 an der Fritzbox anzumelden, leider ohne Erfolg.
Zuerst stand immer nur Registering unten links im Display, nachdem ich <registerWithProxy>false</registerWithProxy> gesetzt habe steht er da wie im angehängten Bild.
Wenn ich den Hörer abhebe bekomme ich auch ein Freizeichen, allerdings sobald ich Wähle höre ich die MFT danach Stille. Nach ca 60 sec fängt das Telephon an zu piepen.
Wenn ich versuche intern per **620 das Telephon zu erreichen bekomme ich ein besetzt Zeichen. Beim Dialplan habe ich auch schon die Alternativ versucht oder ihn weg zu lassen.
SEPxxx.cfg.xml
Code:
<device xsi:type="axl:XIPPhone" ctiid="055543210987">
<deviceProtocol>SIP</deviceProtocol>
<sshUserId>admin</sshUserId>
<sshPassword>password</sshPassword>
<devicePool>
<dateTimeSetting>
<!-- FIXME: Set your preferred date format and timezone here -->
<dateTemplate>D/M/Ya</dateTemplate>
<timeZone>W. Europe Standard/Daylight Time</timeZone>
<ntps>
<!-- NTP might not actually work, but the phone can set the
date/time from the SIP response headers -->
<ntp>
<name>pool.ntp.org</name>
<ntpMode>Unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<!-- This section probably does not do anything useful. -->
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
</ports>
<processNodeName>127.0.0.1</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<registerWithProxy>false</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<callForwardURI>x--serviceuri-cfwdall</callForwardURI>
<callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
<callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
<callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
<meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
<abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
<rfc2543Hold>false</rfc2543Hold>
<callHoldRingback>2</callHoldRingback>
<localCfwdEnable>true</localCfwdEnable>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>0</dndControl>
<remoteCcEnable>true</remoteCcEnable>
</sipCallFeatures>
<sipStack>
<sipInviteRetx>6</sipInviteRetx>
<sipRetx>10</sipRetx>
<timerInviteExpires>180</timerInviteExpires>
<!-- Force short registration timeout to keep NAT connection alive -->
<timerRegisterExpires>180</timerRegisterExpires>
<timerRegisterDelta>5</timerRegisterDelta>
<timerKeepAliveExpires>120</timerKeepAliveExpires>
<timerSubscribeExpires>120</timerSubscribeExpires>
<timerSubscribeDelta>5</timerSubscribeDelta>
<timerT1>500</timerT1>
<timerT2>4000</timerT2>
<maxRedirects>70</maxRedirects>
<remotePartyID>false</remotePartyID>
<userInfo>None</userInfo>
</sipStack>
<autoAnswerTimer>1</autoAnswerTimer>
<autoAnswerAltBehavior>false</autoAnswerAltBehavior>
<autoAnswerOverride>true</autoAnswerOverride>
<transferOnhookEnabled>false</transferOnhookEnabled>
<enableVad>false</enableVad>
<preferredCodec>g711ulaw</preferredCodec>
<dtmfAvtPayload>101</dtmfAvtPayload>
<dtmfDbLevel>3</dtmfDbLevel>
<dtmfOutofBand>avt</dtmfOutofBand>
<alwaysUsePrimeLine>false</alwaysUsePrimeLine>
<alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
<kpml>3</kpml>
<natEnabled>false</natEnabled>
<natAddress></natAddress>
<!-- FIXME: This will appear in the upper right corner of the display -->
<phoneLabel>Buero</phoneLabel>
<stutterMsgWaiting>1</stutterMsgWaiting>
<callStats>false</callStats>
<silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
<disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig>
<startMediaPort>16384</startMediaPort>
<stopMediaPort>16391</stopMediaPort>
<sipLines>
<line button="1">
<featureID>9</featureID>
<featureLabel>620</featureLabel>
<proxy>fritz.box</proxy>
<port>5060</port>
<name>620</name>
<displayName>Max Mustermann</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>620</authName>
<authPassword>password</authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>1</messageWaitingLampPolicy>
<messagesNumber>**600</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<contact>620</contact>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
<line button="4">
<featureID>2</featureID>
<featureLabel>callcenter</featureLabel>
<speedDialNumber>08000001018</speedDialNumber>
</line>
<!-- FIXME: Add more line buttons or speed dial entries here -->
</sipLines>
<voipControlPort>5060</voipControlPort>
<dscpForAudio>184</dscpForAudio>
<ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
<dialTemplate>dialplan.xml</dialTemplate>
</sipProfile>
<commonProfile>
<phonePassword></phonePassword>
<backgroundImageAccess>true</backgroundImageAccess>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<!-- FIXME: Change this to upgrade the firmware -->
<!--loadInformation>SIP45.9-3-1SR2-1S</loadInformation -->
<vendorConfig>
<disableSpeaker>false</disableSpeaker>
<disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
<pcPort>0</pcPort>
<settingsAccess>1</settingsAccess>
<garp>0</garp>
<voiceVlanAccess>1</voiceVlanAccess>
<videoCapability>0</videoCapability>
<autoSelectLineEnable>0</autoSelectLineEnable>
<webAccess>0</webAccess>
<!-- For Sunday (1) and Saturday (7):
<daysDisplayNotActive>1,2,3,4,5,6,7</daysDisplayNotActive>
Current default is to enable the display 24/7.
-->
<daysDisplayNotActive></daysDisplayNotActive>
<displayOnTime>00:00</displayOnTime>
<displayOnDuration>24:00</displayOnDuration>
<displayIdleTimeout>00:00</displayIdleTimeout>
<spanToPCPort>1</spanToPCPort>
<loggingDisplay>1</loggingDisplay>
<loadServer></loadServer>
</vendorConfig>
<versionStamp></versionStamp>
<userLocale>
<name>English_United_States</name>
<uid>1</uid>
<langCode>en_US</langCode>
<version>1.0.0.0-1</version>
<winCharSet>iso-8859-1</winCharSet>
</userLocale>
<networkLocale>United_States</networkLocale>
<networkLocaleInfo>
<name>United_States</name>
<uid>64</uid>
<version>1.0.0.0-1</version>
</networkLocaleInfo>
<deviceSecurityMode>0</deviceSecurityMode>
<!--
<authenticationURL>http://yourwebserver/authenticate.php</authenticationURL>
<directoryURL>http://yourwebserver/directory.xml</directoryURL>
-->
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<idleURL></idleURL>
<informationURL></informationURL>
<messagesURL></messagesURL>
<proxyServerURL></proxyServerURL>
<!--
<servicesURL>http://phone-xml.berbee.com/menu.xml</servicesURL>
-->
<dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>4</transportLayerProtocol>
<capfAuthMode>0</capfAuthMode>
<capfList>
<capf>
<phonePort>3804</phonePort>
</capf>
</capfList>
<certHash></certHash>
<encrConfig>false</encrConfig>
</device>dialplan.xml
Code:
<DIALTEMPLATE>
<TEMPLATE MATCH="*" Timeout="5"/> <!-- Anything else -->
</DIALTEMPLATE>dialplan.xml Alternative
Code:
<?xml version="1.0" encoding="UTF-8"?>
<DIALTEMPLATE>
<TEMPLATE MATCH="110" Timeout="0"/>
<TEMPLATE MATCH="112" Timeout="0"/>
<TEMPLATE MATCH="08000001018" Timeout="0"/>
<TEMPLATE MATCH="*" Timeout="5"/> <!-- Anything else -->
</DIALTEMPLATE>TFTP32 Protokoll
Code:
Connection received from 192.168.0.201 on port 49462 [22/08 01:02:31.745]
Read request for file <CTLSEP002699EEFECB.tlv>. Mode octet [22/08 01:02:31.745]
File <CTLSEP002699EEFECB.tlv> : error 2 in system call CreateFile Das System kann die angegebene Datei nicht finden. [22/08 01:02:31.745]
Connection received from 192.168.0.201 on port 50174 [22/08 01:03:02.430]
Read request for file <ITLSEP002699EEFECB.tlv>. Mode octet [22/08 01:03:02.430]
File <ITLSEP002699EEFECB.tlv> : error 2 in system call CreateFile Das System kann die angegebene Datei nicht finden. [22/08 01:03:02.430]
Connection received from 192.168.0.201 on port 49413 [22/08 01:03:33.037]
Read request for file <ITLFile.tlv>. Mode octet [22/08 01:03:33.037]
File <ITLFile.tlv> : error 2 in system call CreateFile Das System kann die angegebene Datei nicht finden. [22/08 01:03:33.037]
Connection received from 192.168.0.201 on port 49677 [22/08 01:04:03.832]
Read request for file <SEP002699EEFECB.cnf.xml>. Mode octet [22/08 01:04:03.847]
Using local port 61739 [22/08 01:04:03.847]
<SEP002699EEFECB.cnf.xml>: sent 15 blks, 7421 bytes in 0 s. 0 blk resent [22/08 01:04:03.863]
Connection received from 192.168.0.201 on port 49455 [22/08 01:04:44.860]
Read request for file <English_United_States/be-sip.jar>. Mode octet [22/08 01:04:44.860]
File <English_United_States\be-sip.jar> : error 3 in system call CreateFile Das System kann den angegebenen Pfad nicht finden. [22/08 01:04:44.860]
Connection received from 192.168.0.201 on port 50371 [22/08 01:05:15.748]
Read request for file <United_States/g3-tones.xml>. Mode octet [22/08 01:05:15.748]
File <United_States\g3-tones.xml> : error 3 in system call CreateFile Das System kann den angegebenen Pfad nicht finden. [22/08 01:05:15.748]
Connection received from 192.168.0.201 on port 50103 [22/08 01:05:50.645]
Read request for file <dialplan.xml>. Mode octet [22/08 01:05:50.645]
Using local port 61742 [22/08 01:05:50.645]
<dialplan.xml>: sent 1 blk, 93 bytes in 0 s. 0 blk resent [22/08 01:05:50.645]
Zuletzt bearbeitet:
