Hallo,
ich habe ein Openstage 40 SIP welches ich gerade versuche zu reaktivieren, da hier nur noch mit Headsets über Softphones telefoniert wird. Dafür bin ich dann doch schon zu alt ;-)
Das Telefon läuft soweit problemlos. ich habe nur zwei Probleme, die ich hier zusammen poste, weil ich davon ausgehe dass dies beides die selbe Ursache hat. (wenn dem nicht so ist, passe ich das schnellstmöglich an.)
für meine unprofessionelle ausdrucksweise möchte ich mich im Vorfeld entschuldigen. Aber ich bin nur User mit erweiterteren Kenntnissen. Sollte der Post falsch abgelegt sein bitte ich auch das bei den Mods zu entschuldigen und bitte diesen zu verschieben.
Als TK-Anlage fungiert eine QSC-TK (was auch immer das heißen mag)
1. Die Funktionstaste "Umleitung aktivieren"
ist ohne Funktion. das einzige was passiert wenn ich da draufdrücke ist, das das gedimmte Display zurückkehrt und sich aufghellt.
2. im Benutzer Menue (Unify-Webinterface) sind eine ganze Reihe von Befehlen für die Programmtasten ausgegraut, so das diese nicht auswählbar sind.
Edit Novize: Riesenbild auf Vorschau verkleinert und Riesentabelle in ein Quote gepackt - beides zuammen erhöht die Lesbarkeit doch erheblich]
Hier die Daten aus dem User access:
| 00 Terminal number | 004921154203129 |
| 01 SIP server | voip3.bmcag.com |
| 02 SIP port | 5060 |
| 03 SIP registrar | voip3.bmcag.com |
| 04 SIP registrar port | 5060 |
| 05 SIP gateway | voip3.bmcag.com |
| 06 SIP gateway port | 5060 |
| 07 SIP transport | UDP |
| 08 TLS renegotiation | Insecure allowed |
| 09 SIP local | 5060 |
| 10 Server features | No |
| 11 DNS results | The response contains :
1 Questions.
1 Answers.
0 Authoritative Servers.
0 Additional records.
Name : voip3.bmcag.com has IPv4 address : 212.202.32.82 TTL: 600 |
| 12 Multiline | No |
| 13 Keyset lines | None |
| 14 Backup active | No |
| 15 Backup proxy | None |
| 16 Use secure calls | Yes |
| 17 SDES status | Disabled |
| 18 SIP server cert. check | No certificate check |
| 19 Software version | V3R5.12.0 SIP 181001 |
| 20 Display message | None |
| 21 Last restart | 2019-08-04T22:15:25 |
| 22 Memory free | 27827K free |
| 23 Protocol mode | IPv4_IPv6 |
| 24 IP4 address | 192.168.1.251 |
| 25 IP4 subnet mask | 255.255.255.0 |
| 26 IP4 default route | 192.168.1.200 |
| 27 Primary DNS | 192.168.1.200 |
| 28 Secondary DNS | None |
| 29 IP4 route 1 IP | None |
| 30 IP4 route 1 gateway | None |
| 31 IP4 route 1 mask | None |
| 32 IP4 route 2 IP | None |
| 33 IP4 route 2 gateway | None |
| 34 IP4 route 2 mask | None |
| 35 IP6 address | None |
| 36 IP6 prefix length | None |
| 37 IP6 global gateway | None |
| 38 IP6 link local addr | None |
| 39 IP6 route 1 dest | None |
| 40 IP6 route 1 pref len | None |
| 41 IP6 route 1 gateway | None |
| 42 IP6 route 2 dest | None |
| 43 IP6 route 2 pref len | None |
| 44 IP6 route 2 gateway | None |
| 45 MAC address | 001ae86bf91a |
| 46 LLDP | Yes |
| 47 VLAN discovery | LLDP-MED |
| 48 DHCPv4 | Yes |
| 49 DHCPv4 re-use | No |
| 50 DHCPv6 | Yes |
| 51 DHCPv6 re-use | No |
| 52 LAN port type | Automatic |
| 53 PC port status | Disabled |
| 54 PC port type | Automatic |
| 55 PC port autoMDIX | No |
| 56 VLAN ID | None |
| 57 QoS Layer 2 | Yes |
| 58 QoS Layer 2 voice | 5 |
| 59 QoS Layer 2 signalling | 3 |
| 60 QoS Layer 2 default | 0 |
| 61 QoS Layer 3 | Yes |
| 62 QoS Layer 3 voice | EF / 46 |
| 63 QoS Layer 3 signalling | AF31 / 26 |
| 64 LLDP-MED operation | Sent: Thu Aug 8 17:46:54 2019
Chassis ID TLV Data
.Subtype = Network address
.IANA_TYPE = IPv4 Address
.ID = 192.168.1.251
Port ID TLV Data
.Subtype = MAC address
.ID = 00:1A:E8:6B:F9:1A
TTL TLV data
.seconds = 120
System Caps TLV Data
.Supported = Bridge, Telephone,
.Enabled = Telephone,
MAC_Phy config TLV data
.Auto-set supported = Yes
.Auto-set enabled = Yes
.PMD = 0x6c00
.PMD1 = 10BASE-T half duplex mode
.PMD2 = 10BASE-T full duplex mode
.PMD3 = 100BASE-TX half duplex mode
.PMD4 = 100BASE-TX full duplex mode
.MAU = 100BaseTXFD : 0x10
LLDP-MED Caps TLV Data
.Caps - LLDP-MED = Yes
.Caps - Network Policy = Yes
.Caps - Location ID = No
.Caps - Extended Power Mdi PD = Yes
.Caps - Extended Power Mdi Pse = No
.Caps - Inventory = No
.Type = Endpoint Class III
Network policy (Voice) TLV data
.Policy unknown = Yes
.Tagged = No
.VLAN ID = 0
.Layer 2 priority = 0
.DSCP = 0
Network policy (Voice Signalling) TLV data
.Policy unknown = Yes
.Tagged = No
.VLAN ID = 0
.Layer 2 priority = 0
.DSCP = 0
Network policy (Video conferencing) TLV data
.Policy unknown = Yes
.Tagged = No
.VLAN ID = 0
.Layer 2 priority = 0
.DSCP = 0
Extended Power TLV data
.Type = PD
.Source = Unknown
.Priority = Critical
.Power value = 46
Received: Thu Aug 8 17:46:54 2019
Chassis ID TLV Data
.Subtype = MAC address
.ID = 08:36:C9:21:4C:C6
Port ID TLV Data
.Subtype = Locally assigned
.ID = g9
TTL TLV data
.seconds = 120
System Caps TLV Data
.Supported = Other, Bridge, Router,
.Enabled = Other, Bridge,
MAC_Phy config TLV data
.Auto-set supported = Yes
.Auto-set enabled = Yes
.PMD = 0x1
.PMD1 = 1000BASE-T full duplex mode
.PMD2 =
.PMD3 =
.PMD4 =
.MAU = Undefined : 0x0
LLDP-MED Caps TLV Data
.Caps - LLDP-MED = Yes
.Caps - Network Policy = Yes
.Caps - Location ID = No
.Caps - Extended Power Mdi PD = Yes
.Caps - Extended Power Mdi Pse = No
.Caps - Inventory = No
.Type = Network Connectivity
Network policy (Voice) TLV data
.Policy unknown = Yes
.Tagged = No
.VLAN ID = 0
.Layer 2 priority = 0
.DSCP = 0
Network policy (Voice Signalling) TLV data
.Policy unknown = Yes
.Tagged = No
.VLAN ID = 0
.Layer 2 priority = 0
.DSCP = 0
Network policy (Video conferencing) TLV data
.Policy unknown = Yes
.Tagged = No
.VLAN ID = 0
.Layer 2 priority = 0
.DSCP = 0
Extended Power TLV data
.Type = PSE
.Source = Unknown
.Priority = Unknown
.Power value = 0
Port description TLV data
.TLV not supported
System Description TLV data
.TLV not supported
Manage Address TLV data
.TLV not supported
System Name TLV data
.TLV not supported |
| 65 NG911 location | Disabled |
| 66 FIPS enabled | No |
( Welcome aboard )
