Firmware-Update ist fehlgeschlagen Es trat ein nicht

+ kernel_update_start=0
+ kernel_update_len=0
+ name_list=
+ export INSTALL_SUCCESS_NO_REBOOT=0
+ export INSTALL_SUCCESS_REBOOT=1
+ export INSTALL_WRONG_HARDWARE=2
+ export INSTALL_KERNEL_CHECKSUM=3
+ export INSTALL_FILESYSTEM_CHECKSUM=4
+ export INSTALL_URLADER_CHECKSUM=5
+ export INSTALL_OTHER_ERROR=6
+ export INSTALL_FIRMWARE_VERSION=7
+ export INSTALL_DOWNGRADE_NEEDED=8
+ force_update=n
+ uname -r
+ echo install: have Kernel 2.6
install: have Kernel 2.6
+ kversion=26
+ echo install: check and install new firmware ...
install: check and install new firmware ...
+ need_reboot=0
+ korrekt_version=0
+ /bin/update_led_on
/bin/update_led_on: line 2: can't create /var/led: No such device or address
+ [ 26 = 24 ]
+ echo OEM=avm
OEM=avm
+ [ 26 = 24 ]
+ export CONFIG_ENVIRONMENT_PATH=/proc/sys/urlader
+ cat /proc/sys/urlader/annex
+ export ANNEX=B
+ [ -z B ]
+ echo ANNEX=B
ANNEX=B
+ [ -z  ]
+ echo testing acceptance for device Fritz_Box_7270 ...
testing acceptance for device Fritz_Box_7270 ...
+ /etc/version --install=ur8_16MB_xilinx_4eth_2ab_isdn_nt_te_pots_wlan_usb_host_
dect_61056
korrekt install type: ur8_16MB_xilinx_4eth_2ab_isdn_nt_te_pots_wlan_usb_host_dec
t_61056
+ echo device has installtype ur8_16MB_xilinx_4eth_2ab_isdn_nt_te_pots_wlan_usb_
host_dect_61056
device has installtype ur8_16MB_xilinx_4eth_2ab_isdn_nt_te_pots_wlan_usb_host_de
ct_61056
+ [ ! -z avm ]
+ oem_found=0
+ [ avm = avm ]
+ echo OK - OEM avm is supported
OK - OEM avm is supported
+ oem_found=1
+ break
+ [ 1 = 0 ]
+ echo OK - accept this update for device Fritz_Box_7270 ...
OK - accept this update for device Fritz_Box_7270 ...
+ korrekt_version=1
+ echo testing acceptance for device Fritz_Box_7270 done
testing acceptance for device Fritz_Box_7270 done
+ [ -z  ]
+ echo testing acceptance for device Fritz_Box_7270 ...
testing acceptance for device Fritz_Box_7270 ...
+ /etc/version --install=ur8_8MB_xilinx_4eth_2ab_isdn_nt_te_pots_wlan_usb_host_d
ect_05265
install type not korrekt: ur8_16MB_xilinx_4eth_2ab_isdn_nt_te_pots_wlan_usb_host
_dect_61056
+ echo testing acceptance for device Fritz_Box_7270 done
testing acceptance for device Fritz_Box_7270 done
+ kernel_start=0x90020000
+ kernel_size=16121856
+ filesystem_start=0x90000000
+ filesystem_size=0
+ urlader_start=0x90000000
+ urlader_size=131072
+ newFWver=04.76
+ [ 1 = 0 ]
+ /etc/version -v
+ currFWver=54.04.76
+ echo curr: 54.04.76  new: xx.04.76
curr: 54.04.76  new: xx.04.76
+ major_currFWver=54
+ middle_currFWver=54.04
+ middle_currFWver=04
+ minor_currFWver=76
+ echo debug: curr: 54.04.76
debug: curr: 54.04.76
+ middle_newFWver=04
+ middle_newFWver=04
+ minor_newFWver=76
+ echo debug: new: "XX.04.76"
debug: new: "XX.04.76"
+ major_currFWver=54
+ middle_currFWver=4
+ minor_currFWver=76
+ major_newFWver=
+ middle_newFWver=4
+ minor_newFWver=76
+ echo major_currFWver=54
major_currFWver=54
+ echo middle_currFWver=4
middle_currFWver=4
+ echo minor_currFWver=76
minor_currFWver=76
+ echo middle_newFWver=4
middle_newFWver=4
+ echo minor_newFWver=76
minor_newFWver=76
+ [ -z 4 ]
+ [ -z 76 ]
+ [ -z 4 ]
+ [ -z 76 ]
+ [ n = y ]
+ echo check Firmware Version: xx.04.76
check Firmware Version: xx.04.76
+ [ 4 -lt 4 ]
+ echo DEBUG: 4 >= 4
DEBUG: 4 >= 4
+ [ 4 -eq 4 ]
+ [ 76 -gt 89 ]
+ [ 76 -lt 76 ]
+ echo DEBUG: 76 >= 76
DEBUG: 76 >= 76
+ echo Accept Firmware Version: xx.04.76
Accept Firmware Version: xx.04.76
+ echo install: 26 check files...
install: 26 check files...
+ [ -f /var/tmp/filesystem.image ]
+ [ 0 -ne 0 ]
+ [ -f /var/tmp/kernel.image ]
+ /var/chksum /var/tmp/kernel.image
File already contains the checksum, verifying
Calculated checksum is E6D5414B
Saved checksum is E6D5414B
Checksum validation successful!
+ echo chksum for file /var/tmp/kernel.image ok
chksum for file /var/tmp/kernel.image ok
+ [ ! -f /var/post_install ]
+ echo echo $0: start
+ echo sleep 1
+ echo killall run_clock
+ echo if ps | grep -v grep | grep -q telefon ; then killall telefon ; fi
+ echo if ps | grep -v grep | grep -q telnetd ; then killall telnetd ; fi
+ [ 26 = 24 ]
+ echo echo skip deleting language from env
+ echo echo MODE=update > /dev/avm_power
+ [ -e /dev/watchdog ]
+
+ echo echo "disable" > /dev/watchdog
+ echo echo still running:
+ echo ps
+ echo lsmod
+ echo sleep 1
+ [ 26 = 24 ]
+ echo install: 26 getting mtd to install...
install: 26 getting mtd to install...
+ echo install: -----------------------------------------------------
install: -----------------------------------------------------
+ ls -l /var/tmp/kernel.image
+ sed -e s/[^0-9]/#/g
+ sed -e s/#\+[0-9]\+#\+\([0-9]\+\).*/\1/
+ kernel_image_size=9527816
+ get_kernel_mtd 9527816 16121856
+ kernel_image_size=9527816
+ kernel_mtd_size=16121856
+ cat /proc/mtd
+ sed -n -e s/mtd[0-9].*: \([^ ]*\) \([^ ]*\) .*/\1/p
+ grep urlader
+ tmp_size=00020000
+ [ -z 00020000 ]
+ [ -z 00020000 ]
+ bootloader_size=0x00020000
+ cat /proc/mtd
+ grep "jffs2"
+ grep -v Kernel
+ sed -n -e s/mtd[0-9].*: \([^ ]*\) \([^ ]*\) .*/\1/p
+ tmp_size=00640000
+ [ -z 00640000 ]
+ jffs2_size=0x00640000
+ Kernel_without_jffs2_size=9568256
+ kernel_update_start=268566528
+ echo bootloader_size 0x00020000
bootloader_size 0x00020000
+ echo jffs2_size 0x00640000
jffs2_size 0x00640000
+ echo Kernel_without_jffs2_size 9568256
Kernel_without_jffs2_size 9568256
+ echo kernel_image_size 9527816
kernel_image_size 9527816
+ echo kernel_mtd_size 16121856
kernel_mtd_size 16121856
+ echo Kernel_Start_Add=268566528
Kernel_Start_Add=268566528
+ echo Kernel_End_Addr=278094344
Kernel_End_Addr=278094344
+ echo Kernel_without_jffs2_End_Addr=278134784
Kernel_without_jffs2_End_Addr=278134784
+ [ 9527816 -le 9568256 ]
+ kernel_update_len=9568256
+ return 0
+ echo install: -----------------------------------------------------
install: -----------------------------------------------------
+ echo install: kernel_size=16121856
install: kernel_size=16121856
+ echo install: kernel_update_start=268566528
install: kernel_update_start=268566528
+ echo install: kernel_update_len=9568256
install: kernel_update_len=9568256
+ [ 268566528 = 0 ]
+ echo install: 26 setting files to install...
install: 26 setting files to install...
+ [ -f /var/tmp/kernel.image ]
+ crc_param=1
+ echo install: /var/tmp/kernel.image to start(268566528) size(9568256)
install: /var/tmp/kernel.image to start(268566528) size(9568256)
+ echo update_parameter=flash_update_file0="/var/tmp/kernel.image,268566528,9568
256,crc=1"
+ need_reboot=1
+ [ -f /var/tmp/filesystem.image ]
+ ls -l /var/tmp/filesystem.image
+ sed -e s/#\+[0-9]\+#\+\([0-9]\+\).*/\1/
+ sed -e s/[^0-9]/#/g
+ act_fs_size=0
+ [ 0 -ne 0 ]
+ [ 1 -eq 1 ]
+ echo insmod /var/flash_update.ko $update_parameter
+ echo exit 0
+ chmod +x /var/post_install
+ [ 1 -eq 1 ]
+ [ -f /var/tmp/plugins.update ]
+ [ 1 -eq 1 ]
+ echo install: check for old settings ...
install: check for old settings ...
+ OLD_SETTINGS_FILE=#! /bin/sh major=`grep tffs /proc/devices` tffs_major=${majo
r%%tffs} telnetd -l /sbin/ar7login killall capiotcp_server sleep 5 /usr/bin/capi
otcp_server -p5031 -m3 &
+ [ -f /var/rc.user ]
+ [ -x /var/regelex ]
+ [ -e /var/flash/fx_lcr ]
+ echo clear_id 95
+ echo clear_id 96
+ [ 1 -eq 1 ]
+ echo set INFO led to blink (modul=7, state=4)
set INFO led to blink (modul=7, state=4)
+ /bin/update_led_on
/bin/update_led_on: line 2: can't create /var/led: No such device or address
+ exit 1

/var # ls
TZ                                    log
USB-proc-bus-usb-001-001-hub-001      media
USB-proc-bus-usb-001-002-hub-002      mediapath
USB-proc-bus-usb-001-003-storage-003  mod
USB-proc-bus-usb-001-004-bulk-004     plugin-mediasrv
cache                                 plugin-mini
config.def                            plugin-ntfs
default                               plugin-onlinepb
dev                                   plugin-samba
devices                               plugin-tam
dsld.autodetect                       post_install
env                                   rpc
env.cache                             run
firmware_flag                         samba
flash                                 signature
flash.html                            spool
fx_moh                                sysfs
gcov                                  tam
html                                  tmp
htmltext.db                           tr064_ssl_cert.pem
keys                                  usbhostup
led                                   wan.tc
lock                                  websrv_ssl_cert.pem
/var #