MODEM UMTS USB driver for 7170

skizzo3000 · 17 Sep 2008

Hello,
i made a working driver for e220, e270 umts modem for 7170 with 2.6.13 kernel.

It works only if only gsm modem is attached on usb port.

i made hotplug script for automatic driver install.

Now the modem is mounted on ttyUSB( 0 1 2 ) serial ports.

How can i make internet connection ?

pppd is not in freetz.

Thanks Sk3

meiser79 · 18 Sep 2008

Hi,

pppd is part of freetz. But it's only shown when pptp or pptpd is selected because only these packages use pppd.

As I understood, there's also the "replace kernel" dependency for pppd.

Best regards,
Whoopie

skizzo3000 · 18 Sep 2008

where can i find the pptp option in menuconfig ?
and kernel replace ?

EDIT: ok i found it in the newer freetz version.

Thanks Sk3

molfi · 1 Feb 2009

Hello.

I am interested in this solution, too.
At least for test reasons.

Currently we are using Internet via satellite. At its best 256 kb/s down and 64 kb/s up, but very slow connection because of the distance.

skizzo3000, how far are you with this one?
Is there a special way of how to compile the firmware with freetz?

Kind regards
molfi

skizzo3000 · 1 Feb 2009

I made:
usbserial, option drivers
pppd, chat programs
a GUI in cgi-bin
an atserver daemon and atclient to comunicate with modem
but i had disable iptable freetz GUI

i made a working test firmware but all in italian.

Sk3

molfi · 1 Feb 2009

Hi.

Sounds great.

I know that is your work, but could you upload all needed files to this thread?
And maybe a short manual of how to get it to work.

Or is there a section on your website that contains all needed things?

Regards
molfi

skizzo3000 · 1 Feb 2009

in these days i'm working on a 'gsm framework' so all user can call the functions without any problem.

At now is difficult for me post some working files, because they are very alfa test and hard to integrate in firmware.

In march i think i will complete the framework and i upload it with english guide.

Features in framework:

- hotplug usb modem
- hw test
- saving conf file in flash
- internet connection with pppd
- operator and mode info
- ppp session info/log
- firewall/nat on ppp interface
- parameters configuration in simple GUI
- sms support: read and send and delete
- sms gui
- sim phonebook
- phonebook gui
- some example sms script for automations
- autopin
- autoconnect (umts)
- serial driver and daemon for input/output serial borad with rele and i2c bus
- simple function to create gui (html)

ALL WRITE IN SHELL SCRIPT !! (so it works on all linux PC and embedded)

a simple gui preview

Sk3

molfi · 1 Feb 2009

Hi

Looks good.
Ok, then I will wait.

Thanks for your efforts in advance.

Regards
molfi

Feuer-Fritz · 8 Apr 2009

Hi, Skizzo

How far did your work grow? Any success until now?

skizzo3000 · 8 Apr 2009

Hi
i made a working firmware but without the gsm framework.
dchp server is disabled and the iptables has a simple configuration, that can be changed only via telnet.

WipeoutXL · 14 Apr 2009

Hello Skizzo,

maybe you can give some hints to do this on a 3170?

Maybe you can post the freetz config file. This would be very nice.

With best regards
Daniel

El_Presidente · 17 Aug 2009

nice to hear you are working on that

did you make any progress lately, i have also an 7170 and a e176 huawei.
do you have anything new to test?
i would really appreciate it

bekim · 15 Nov 2009

So many versions of Firmwares

Hello!
I was on the download-page to find the firmware and UMTS-Driver, I found the GSM/UMTS-Driver but which of these many firmware can I use in my fritzbox 7170 to try if it accepts my Huawei E172?
I will even try it with italian firmware, the menu works almost the same and many of the most important words are in english regardless of the language of userinterface...
Thx
Greetings

skizzo3000 · 16 Nov 2009

hello,
my firmware is tested with e220/e270 but i think it works with other huawei umts modem.

A new version on 25 december

Sk3

ksawery46 · 16 Nov 2009

skizzo3000 schrieb:
Hello,
i made a working driver for e220, e270 umts modem for 7170 with 2.6.13 kernel.

It works only if only gsm modem is attached on usb port.

i made hotplug script for automatic driver install.

Now the modem is mounted on ttyUSB( 0 1 2 ) serial ports.

How can i make internet connection ?

pppd is not in freetz.

Thanks Sk3

Welcome
I'm at the stage of the firmware modyfukacji FRITZ! Box with the assistance of speed-to-fritz, and similar tools.
I would like to install the firmware for the 7170 and 7141 (58.04.76)
GSM modem on USB Hueway E220 E165. I know that you have the drivers for the E220. I have a question?
Is posiadsz driver for E165?
Do you have an operative part of the firmware - the menu with support for GSM, as in 7270? Or a script like this to do the same for drivers that do not cater?
Can this be done by adapting the firmware for the 7170 and 7270 drivers substitution?
Case Pilana
very please to assist you as Your server ..
Xavier

Languages

Suche

Languages

Suche

MODEM UMTS USB driver for 7170

skizzo3000

Neuer User

Anhänge

meiser79

Aktives Mitglied

skizzo3000

Neuer User

molfi

Neuer User

skizzo3000

Neuer User

molfi

Neuer User

skizzo3000

Neuer User

Anhänge

molfi

Neuer User

Feuer-Fritz

Guest

skizzo3000

Neuer User

WipeoutXL

Neuer User

El_Presidente

Neuer User

bekim

Neuer User

skizzo3000

Neuer User

ksawery46

Neuer User

Zurzeit aktive Besucher

Neueste Beiträge

Statistik des Forums