Pakete werden im Menü nicht angezeigt - liegt's an External?

DHMH · 31 Mrz 2010

Hi,
ich habe heute meine Fritz!Box endlich "gefreezt" bekommen, nur leider werden bei mir die Pakete, die ich als external gesetzt habe, nicht bei "Pakete" angezeigt

habe das gleiche Problem wie der User in diesem Thread:
http://www.ip-phone-forum.de/showthread.php?t=184861
Leider kann ich svn up nicht nutzen, da dort dann der Fehler:
"Skipped: ' . '" kommt

Außerdem habe ich in freetz-linux keine Netzwerkverbindung, wenn ich bei Devices -> Network Adapter -> Bridged auswähle, aber ich denke, dies wird eher ein VMware Player Problem sein.
Danke im Voraus!
lg DHMH

Silent-Tears · 31 Mrz 2010

Wenn du kein Netz hast, funktioniert "svn irgendwas" nicht. Logisch, oder? Immerhin werden da Daten mit dme Server verglichen. Deine Netzwerkprobleme3 haben aber in der Tat hier nichts zu suchen, die kannst du sicher selber lösen.

Zu deinem External-Problem: Flashe bitte die Firmware neu(am besten per Freetz-Webinterface), reboote die Box danach.
Darauf dann aus dem Freetz-Webinterface die .external-Datei. Poste bitte beide Ausgaben komplett.

DHMH · 31 Mrz 2010

Also nochmal das vorhandene Freetz Image flashen?
Also das normale Freetz-Image, welches ich im AVM interface benutzt habe zum flashen jetzt im freetz interface benutzen?

Silent-Tears · 31 Mrz 2010

Ja, exakt dies. Im Freetz-Webinterface ist es halt ausführlicher.

DHMH · 31 Mrz 2010

Danke.
Dann exportier ich erstmal die Einstellungen, da ich keine Lust habe, die jedes mal neu einzustellen.. Ach ja, svn up müsste jetzt gehen, habe VMware Player mit DHCP zum Laufen bekommen..
Hoffentlich kommt jetzt nicht der besagte fehler.. mom
Es kommt immernoch der besagte Fehler.
In welchem verzeichnis muss ich svn up ausführen?
Bin aktuell in /home/freetz/freetz-1.1.2
lg DHMH

PS:
gibt es eigentlich schon ne version, die auch die aktuelle AVM Firmware enthält?

Silent-Tears · 31 Mrz 2010

Lass mich raten, du hast nicht ausgechecked sondern runtergeladen und entpackt? Wenn ja: Wiki -> Stable-Branch auschecken.

Dein Netzwerk musst d allein in Ordnung bringen. Player auf Bridged, DHCP an der Box an, richtiges Interface für die Bridge nehmen.

DHMH · 31 Mrz 2010

Der Player läuft ja jetzt, die IP wird über DHCP zugewiesen..
Allerdings habe ich nur svn up eingegeben..
Ich teste das mal mit dem stable-branch..

wenn ich jetzt über das Freetz Interface die Firmware auswähle und auf "Firmware hochladen" klicke, lädt und lädt und lädt firefox, aber nix passiert.. habe das hier gerade für 5 minuten durchlaufen lassen und abgebrochen..
Es soll doch nicht so sein, oder?
lg DHMH

Silent-Tears · 31 Mrz 2010

Nein, aber auch dazu kannst du mal die Boardsuceh verwenden, das muss dir Niemand noch einmal vorkauen.

DHMH · 31 Mrz 2010

Habe jetzt ausgecheckt und erstelle jetzt ein neues Image.. dieses werde ich dann mal versuchen, per freetz oberfläche zu laden..
lg DHMH

EDIT:
Hier ist die External-Log der Freetz-Oberfläche:

Code:

[external] Processing file /var/tmp/a29dmR
[external] Target directory: /var/media/ftp/uStor01/external
[external] Unpacking new stuff:
  ./
  ./transmissioncli
  ./.external
  ./transmission-remote
  ./transmission-web-home/
  ./transmission-web-home/index.html
  ./transmission-web-home/stylesheets/
  ./transmission-web-home/stylesheets/iphone.css
  ./transmission-web-home/stylesheets/common.css
  ./transmission-web-home/stylesheets/ie6.css
  ./transmission-web-home/stylesheets/ie7.css
  ./transmission-web-home/javascript/
  ./transmission-web-home/javascript/torrent.js
  ./transmission-web-home/javascript/common.js
  ./transmission-web-home/javascript/transmission.remote.js
  ./transmission-web-home/javascript/transmission.js
  ./transmission-web-home/javascript/menu.js
  ./transmission-web-home/javascript/jquery/
  ./transmission-web-home/javascript/jquery/jquery.form.min.js
  ./transmission-web-home/javascript/jquery/json.min.js
  ./transmission-web-home/javascript/jquery/jquery.min.js
  ./transmission-web-home/javascript/jquery/jquery.contextmenu.min.js
  ./transmission-web-home/javascript/jquery/jquery.transmenu.min.js
  ./transmission-web-home/javascript/dialog.js
  ./transmission-web-home/images/
  ./transmission-web-home/images/progress/
  ./transmission-web-home/images/progress/progress.png
  ./transmission-web-home/images/favicon.ico
  ./transmission-web-home/images/graphics/
  ./transmission-web-home/images/graphics/filter_icon.png
  ./transmission-web-home/images/graphics/chrome.png
  ./transmission-web-home/images/graphics/filter_bar.png
  ./transmission-web-home/images/graphics/logo.png
  ./transmission-web-home/images/graphics/iphone_chrome.png
  ./transmission-web-home/images/graphics/transfer_arrows.png
  ./transmission-web-home/images/favicon.png
  ./transmission-web-home/images/webclip-icon.png
  ./transmission-web-home/images/buttons/
  ./transmission-web-home/images/buttons/info_files.png
  ./transmission-web-home/images/buttons/file_wanted_buttons.png
  ./transmission-web-home/images/buttons/file_priority_buttons.png
  ./transmission-web-home/images/buttons/tab_backgrounds.png
  ./transmission-web-home/images/buttons/info_activity.png
  ./transmission-web-home/images/buttons/toolbar_buttons.png
  ./transmission-web-home/images/buttons/info_general.png
  ./transmission-web-home/images/buttons/torrent_buttons.png
  ./transmission-daemon
  ./ntfs-3g
[external] Done.

EDIT2:
Habe jetzt bei Firmware-Update die Datei ausgewählt, es hat geladen und dann hat die Fritz!Box einfach so neugestartet...
Immernoch keine Änderung

was nun?
Soll ichs nochmal versuchen?

DHMH · 31 Mrz 2010

Habe es jetzt noch einmal versucht, aber auch diesmal keine Besserung

Woran kann es liegen?

er13 · 31 Mrz 2010

Meines Wissens werden keine rc-Scripte, keine .cfg- und auch keine .cgi-Dateien mit external ausgelagert, von daher ist es sehr unwahrscheinlich, dass es etwas mit external zu tun hat, i.e. es ist purer Zufall, dass grade die Dienste, die Du ausgelagert hast, nicht angezeigt werden.

Höchstwahrscheinlich geht etwas schief beim Booten, irgendein Service bleibt hängen, alle die nach ihm kommen, kommen gar nicht zum Zug, können sich also nicht registrieren, werden daher nicht im WebIF angezeigt. Mögliche Ursache ist auch, dass Du etwas in debug.cfg stehen hast, was das Starten von freetz verhindert, aber dann wäre gar kein freetz-WebIf da, wenn ich mich nicht irre. Zeig' mal deine /var/log/mod*.log-Dateien und hänge Deine .config hier an.

p.s. und transmission Web-IF wird bei Dir nicht laufen, das kann ich schon mal jetzt sagen, denn es wird nicht gefunden. Du musst Verzeichnisstruktur beibehalten, i.e. "Keep subdirectories"-Option aktivieren.

DHMH · 1 Apr 2010

Ok, dann werde ich freetz wohl neu draufpacken und kompilieren... (bzw. andersrum

)
Hier ist die var/log/mod.log:

Code:

rc.mod version freetz-1.1.2
crond is disabled
Starting telnetd...done.
Starting Freetz webinterface...done.
swap is disabled
/var/log #

/var/log/mod_log.log:

Code:

fritz.fonwlan.box login: root
Password:
   __  _   __  __ ___ __
  |__ |_) |__ |__  |   /
  |   |\  |__ |__  |  /_

   The fun has just begun...


BusyBox v1.12.4 (2010-03-30 13:34:07 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

ermittle die aktuelle TTY
tty is "/dev/pts/0"
Console Ausgaben auf dieses Terminal umgelenkt
/var/mod/root # cd /var/log
/var/log # ls -l
-rw-r--r--    1 root     root          125 Apr  1 10:02 mod.log
-rw-r--r--    1 root     root          147 Jan  1  2000 mod_load.log
/var/log # cat mod.log
rc.mod version freetz-1.1.2
crond is disabled
Starting telnetd...done.
Starting Freetz webinterface...done.
swap is disabled
/var/log #

Muss ich das AVM Webinterface zum neuen einspielen der Firmware nutzen?
Wenn ich das Freetz Interface nutze, wird ja die FritzBox einfach neugestartet und nix passiert

Daher denke ich mal, ich muss das AVM interface nehmen, oder?

colonia27 · 1 Apr 2010

Solang du irgendwas mit external machst, bringt die das AVM-IF gar nichts.
Aber hast du mal wegen deinem Reboot-Problem im freetz-IF Update-Dialog mit den Buttons bzgl. "AVM-Dienste beenden" etc. gespielt?

Silent-Tears · 1 Apr 2010

Nein, er wollte nicht im Wiki dazu lesen und ebenso nicht die Forensuche nutzen, denn auf das Einspielen und die Optionen hab ich ihn in Post #8 hingewiesen, aber das war ihm wohl zu kryptisch.

*seufz*

colonia27 · 1 Apr 2010

Wenn dem so ist, *doppel-seufz* :-D

olistudent · 1 Apr 2010

Lustig. Warum steht da in /var/log/mod_log.log das was er oben drüber eingegeben hat?

MfG Oliver

DHMH · 1 Apr 2010

@Silent_Tears:
Doch, ich habe Google & die Forensuche bemüht.
Ich habe nichts gefunden.. Kannst du mir einen Link geben?
@olistudent:
Sry, mein Fehler xD

EDIT:
Ach ja, das Wiki habe ich mir durchgelesen.. Komplett..
Da war nix brauchbares dabei

Silent-Tears · 1 Apr 2010

Die Optionen unter dem einspielen des Images. Sachen beenden, nicht beenden, teilweise beenden. In Erinnerung? Wenns ohne Beenden nicht klappt, dann mal mit teilweise versuchen, und wenn das nicht geht, dann mit komplett. Und: Über wlan macht zumindest bei der letzten Option das flashen unmöglich.

DHMH · 1 Apr 2010

Alles klar, dann werde ich das mal über LAN versuchen. Danke!

DHMH · 1 Apr 2010

es hat nix gebracht, hier sind die ergebnisse:

Code:

AVM-Dienste anhalten, Teil 1 (prepare_fwupgrade start) ...
  cat: can't open '/var/run/delayed_reboot.pid': No such file or directory
  rm: cannot remove '/var/run/delayed_reboot.pid': No such file or directory
  rmmod: rfcntl: No such file or directory
  killall: flashd: no process killed
  killall: minid: no process killed
  disable watchdog
  rmmod: isdn_fbox_fon3: No such file or directory
  rmmod: kdsldmod: Resource temporarily unavailable
  killall: checkservices: no process killed
ERLEDIGT

Code:

Firmware-Archiv extrahieren ...
  ./
  ./var/
  ./var/.packages
  ./var/chksum
  ./var/regelex
  ./var/install
  ./var/static.pkg
  ./var/tmp/
  ./var/tmp/kernel.image
  ./var/tmp/filesystem.image
  ./var/flash_update.ko
  ./var/info.txt
  ./var/flash_update.o
  ./var/signature
  ./var/.config
DONE

Code:

AVM-Dienste anhalten, Teil 2 (prepare_fwupgrade end) ...
  cat: can't open '/var/run/delayed_reboot.pid': No such file or directory
  rm: cannot remove '/var/run/delayed_reboot.pid': No such file or directory
  disable watchdog
ERLEDIGT

Code:

Ausführen des Firmware-Installationsskripts /var/install ...
  install: have Kernel 2.6
  install: check and install new firmware ...
  /bin/update_led_on: line 2: can't create /dev/led: No such device or address
  OEM=avm
  ANNEX=B
  testing acceptance for device Fritz_Box_7170 ...
  korrekt install type: ar7_8MB_xilinx_4eth_3ab_isdn_nt_te_pots_wlan_usb_host_25762
  device has installtype ar7_8MB_xilinx_4eth_3ab_isdn_nt_te_pots_wlan_usb_host_25762
  assumed ANNEX B -- found ANNEX B
  device has ANNEX B
  OK - OEM avm is supported
  OK - accept this update for device Fritz_Box_7170 ...
  testing acceptance for device Fritz_Box_7170 done
  curr: 29.04.76  new: xx.04.76
  debug: curr: 29.04.76
  debug: new: "XX.04.76"
  major_currFWver=29
  middle_currFWver=4
  minor_currFWver=76
  middle_newFWver=4
  minor_newFWver=76
  check Firmware Version: xx.04.76
  DEBUG: 4 >= 4
  DEBUG: 76 >= 76
  Accept Firmware Version: xx.04.76
  install: 26 check files...
  File already contains the checksum, verifying
  Calculated checksum is 5DBAE842
  Saved checksum is 5DBAE842
  Checksum validation successful!
  chksum for file /var/tmp/kernel.image ok
  install: 26 getting mtd to install...
  install: -----------------------------------------------------
  bootloader_size 0x00010000
  jffs2_size 0x0
  Kernel_without_jffs2_size 7798784
  kernel_image_size 7461896
  kernel_mtd_size 7798784
  Kernel_Start_Add=268500992
  Kernel_End_Addr=275962888
  Kernel_without_jffs2_End_Addr=276299776
  install: -----------------------------------------------------
  install: kernel_size=7798784
  install: kernel_update_start=268500992
  install: kernel_update_len=7798784
  install: 26 setting files to install...
  install: /var/tmp/kernel.image to start(268500992) size(7798784)
  install: check for old settings ...
  set INFO led to blink (modul=7, state=4)
  /bin/update_led_on: line 2: can't create /dev/led: No such device or address
ERLEDIGT - Rückgabewert des Installationsskripts = 1 (INSTALL_SUCCESS_REBOOT)

Code:

Von /var/post_install generierter Inhalt:
  #! /bin/sh
  echo $0: start
  sleep 1
  killall run_clock
  if ps | grep -v grep | grep -q telefon ; then killall telefon ; fi
  if ps | grep -v grep | grep -q telnetd ; then killall telnetd ; fi
  echo skip deleting language from env
  echo MODE=update > /dev/avm_power
  echo "disable" > /dev/watchdog
  echo still running:
  ps
  lsmod
  sleep 1
  update_parameter=flash_update_file0="/var/tmp/kernel.image,268500992,7798784,crc=1"
  insmod /var/flash_update.ko $update_parameter
  exit 0
ENDE DER DATEI

Das Nach-Installationsskript läuft beim Neutart (reboot) und führt die
darin definiterten Aktionen aus, z.B. das tatsächliche Flashen der Firmware.
Sie können immer noch entscheiden, diesen Vorgang abzubrechen, indem Sie
das Skript und den Rest der extrahierten Firmware-Komponenten löschen.

und hier die external log:

Code:

[external] Processing file /var/tmp/yj34Dh
[external] Target directory: /var/media/ftp/uStor01/external
[external] Unpacking new stuff:
  ./
  ./usr/
  ./usr/bin/
  ./usr/bin/transmissioncli
  ./usr/bin/transmission-remote
  ./usr/bin/transmission-daemon
  ./usr/share/
  ./usr/share/transmission-web-home/
  ./usr/share/transmission-web-home/index.html
  ./usr/share/transmission-web-home/stylesheets/
  ./usr/share/transmission-web-home/stylesheets/iphone.css
  ./usr/share/transmission-web-home/stylesheets/common.css
  ./usr/share/transmission-web-home/stylesheets/ie6.css
  ./usr/share/transmission-web-home/stylesheets/ie7.css
  ./usr/share/transmission-web-home/javascript/
  ./usr/share/transmission-web-home/javascript/torrent.js
  ./usr/share/transmission-web-home/javascript/common.js
  ./usr/share/transmission-web-home/javascript/transmission.remote.js
  ./usr/share/transmission-web-home/javascript/transmission.js
  ./usr/share/transmission-web-home/javascript/menu.js
  ./usr/share/transmission-web-home/javascript/jquery/
  ./usr/share/transmission-web-home/javascript/jquery/jquery.form.min.js
  ./usr/share/transmission-web-home/javascript/jquery/json.min.js
  ./usr/share/transmission-web-home/javascript/jquery/jquery.min.js
  ./usr/share/transmission-web-home/javascript/jquery/jquery.contextmenu.min.js
  ./usr/share/transmission-web-home/javascript/jquery/jquery.transmenu.min.js
  ./usr/share/transmission-web-home/javascript/dialog.js
  ./usr/share/transmission-web-home/images/
  ./usr/share/transmission-web-home/images/progress/
  ./usr/share/transmission-web-home/images/progress/progress.png
  ./usr/share/transmission-web-home/images/favicon.ico
  ./usr/share/transmission-web-home/images/graphics/
  ./usr/share/transmission-web-home/images/graphics/filter_icon.png
  ./usr/share/transmission-web-home/images/graphics/chrome.png
  ./usr/share/transmission-web-home/images/graphics/filter_bar.png
  ./usr/share/transmission-web-home/images/graphics/logo.png
  ./usr/share/transmission-web-home/images/graphics/iphone_chrome.png
  ./usr/share/transmission-web-home/images/graphics/transfer_arrows.png
  ./usr/share/transmission-web-home/images/favicon.png
  ./usr/share/transmission-web-home/images/webclip-icon.png
  ./usr/share/transmission-web-home/images/buttons/
  ./usr/share/transmission-web-home/images/buttons/info_files.png
  ./usr/share/transmission-web-home/images/buttons/file_wanted_buttons.png
  ./usr/share/transmission-web-home/images/buttons/file_priority_buttons.png
  ./usr/share/transmission-web-home/images/buttons/tab_backgrounds.png
  ./usr/share/transmission-web-home/images/buttons/info_activity.png
  ./usr/share/transmission-web-home/images/buttons/toolbar_buttons.png
  ./usr/share/transmission-web-home/images/buttons/info_general.png
  ./usr/share/transmission-web-home/images/buttons/torrent_buttons.png
  ./.external
[external] Done.

Was nun? Bitte helft mir

EDIT:
hier ist außerdem meine .config:

Code:

#
# Automatically generated make config: don't edit
#
FREETZ_HAVE_DOT_CONFIG=y

#
# General --------------------------------
#
FREETZ_AVM_VERSION_04_76=y
# FREETZ_TYPE_300IP_AS_FON is not set
# FREETZ_TYPE_2170 is not set
# FREETZ_TYPE_FON is not set
# FREETZ_TYPE_FON_5010 is not set
# FREETZ_TYPE_FON_5050 is not set
# FREETZ_TYPE_FON_5140 is not set
# FREETZ_TYPE_FON_WLAN is not set
# FREETZ_TYPE_FON_WLAN_7050 is not set
# FREETZ_TYPE_FON_WLAN_7112 is not set
# FREETZ_TYPE_FON_WLAN_7113 is not set
# FREETZ_TYPE_FON_WLAN_7140 is not set
# FREETZ_TYPE_FON_WLAN_7141 is not set
# FREETZ_TYPE_FON_7150 is not set
FREETZ_TYPE_FON_WLAN_7170=y
# FREETZ_TYPE_FON_WLAN_7240 is not set
# FREETZ_TYPE_FON_WLAN_7270 is not set
# FREETZ_TYPE_FON_WLAN_7270_V3 is not set
# FREETZ_TYPE_WLAN_3020 is not set
# FREETZ_TYPE_WLAN_3030 is not set
# FREETZ_TYPE_WLAN_3130 is not set
# FREETZ_TYPE_WLAN_3131 is not set
# FREETZ_TYPE_WLAN_3170 is not set
# FREETZ_TYPE_WLAN_3270 is not set
# FREETZ_TYPE_WLAN_3270_V3 is not set
# FREETZ_TYPE_SPEEDPORT_W501V is not set
# FREETZ_TYPE_CUSTOM is not set
# FREETZ_TYPE_LABOR is not set
# FREETZ_TYPE_ALIEN_HARDWARE is not set
FREETZ_AVM_VERSION_STRING="04.76"
FREETZ_TYPE_LANG_DE=y
# FREETZ_TYPE_LANG_A_CH is not set
# FREETZ_TYPE_LANG_EN is not set
FREETZ_TYPE_LANG_STRING="de"
FREETZ_TYPE_STRING="7170"
FREETZ_INSTALL_BASE=y
FREETZ_REPLACE_BUSYBOX=y
FREETZ_REPLACE_KERNEL_AVAILABLE=y
# FREETZ_REPLACE_KERNEL is not set
FREETZ_SHOW_ADVANCED=y
FREETZ_TARGET_REF="8mb_26"
FREETZ_KERNEL_REF="8mb_26"
FREETZ_KERNEL_LAYOUT="ohio"
FREETZ_KERNEL_MTD_SIZE=119
FREETZ_HAS_PHONE=y
FREETZ_HAS_TAM=y
FREETZ_HAS_WLAN=y
# FREETZ_HAS_USB_CLIENT is not set
FREETZ_HAS_USB_HOST=y
# FREETZ_HAS_AVM_INETD is not set
FREETZ_HAS_LIBSSL=y

#
# Mod ------------------------------------
#
FREETZ_LANG_DE=y
# FREETZ_LANG_EN is not set
FREETZ_LANG_STRING="de"

#
# Patches
#

#
# Remove Brandings
#
# FREETZ_REMOVE_BRANDING_1und1 is not set
# FREETZ_REMOVE_BRANDING_avm is not set
# FREETZ_REMOVE_BRANDING_freenet is not set
# FREETZ_REMOVE_HELP is not set
# FREETZ_REMOVE_ASSISTANT is not set
# FREETZ_REMOVE_TR069 is not set
# FREETZ_PATCH_DSL_EXPERT is not set
# FREETZ_PATCH_VCC is not set
# FREETZ_PATCH_ENUM is not set
# FREETZ_PATCH_SIGNED is not set
FREETZ_PATCH_USBSTORAGE=y
FREETZ_USBSTORAGE_AUTOMOUNT=y
# FREETZ_AUTOMOUNT_EXT2 is not set
# FREETZ_AUTOMOUNT_EXT3 is not set
# FREETZ_AUTOMOUNT_NTFS is not set
# FREETZ_AUTOMOUNT_REISER_FS is not set
# FREETZ_AUTORUN_AUTOEND is not set
# FREETZ_PATCH_MAXDEVCOUNT is not set
# FREETZ_PATCH_GETCONS is not set
# FREETZ_REMOVE_UPNP is not set
# FREETZ_REMOVE_USERMAN is not set
# FREETZ_REMOVE_FTPD is not set
# FREETZ_REMOVE_MEDIASRV is not set
# FREETZ_REMOVE_SMBD is not set
# FREETZ_REMOVE_MINID is not set
# FREETZ_REMOVE_AURA_USB is not set
# FREETZ_REMOVE_AVM_VPN is not set
# FREETZ_REMOVE_DSLD is not set
# FREETZ_REMOVE_CAPIOVERTCP is not set
# FREETZ_REMOVE_DTRACE is not set
# FREETZ_REMOVE_VOIP_ISDN is not set
# FREETZ_REMOVE_WLAN is not set

#
# Package selection
#

#
# Standard packages
#
# FREETZ_PACKAGE_BFTPD is not set
# FREETZ_PACKAGE_BIRD is not set
# FREETZ_PACKAGE_BRIDGE_UTILS is not set
# FREETZ_PACKAGE_CALLMONITOR is not set
# FREETZ_PACKAGE_CHECKMAILD is not set
# FREETZ_PACKAGE_CIFSMOUNT is not set
# FREETZ_PACKAGE_CPMACCFG is not set
# FREETZ_PACKAGE_CURL is not set
# FREETZ_PACKAGE_DECO is not set
# FREETZ_PACKAGE_DNSMASQ is not set
# FREETZ_PACKAGE_DROPBEAR is not set
# FREETZ_PACKAGE_DTMFBOX is not set
# FREETZ_PACKAGE_ESPEAK is not set
# FREETZ_PACKAGE_FUSE is not set
# FREETZ_PACKAGE_INETD is not set
# FREETZ_PACKAGE_KNOCK is not set
# FREETZ_PACKAGE_MC is not set
# FREETZ_PACKAGE_MINI_FO is not set
# FREETZ_PACKAGE_MTR is not set
# FREETZ_PACKAGE_NANO is not set
# FREETZ_PACKAGE_NETCAT is not set
# FREETZ_PACKAGE_NETSNMP is not set
# FREETZ_PACKAGE_NTFS is not set
# FREETZ_PACKAGE_OPENNTPD is not set
# FREETZ_PACKAGE_OPENVPN is not set
# FREETZ_PACKAGE_PINGTUNNEL is not set
# FREETZ_PACKAGE_PRIVOXY is not set
# FREETZ_PACKAGE_RCAPID is not set
# FREETZ_PACKAGE_SAMBA is not set
# FREETZ_PACKAGE_SCREEN is not set
# FREETZ_PACKAGE_STUNNEL is not set
# FREETZ_PACKAGE_TCPDUMP is not set
# FREETZ_PACKAGE_TOR is not set
# FREETZ_PACKAGE_VPNC is not set
# FREETZ_PACKAGE_VSFTPD is not set

#
# Web interface
#
# FREETZ_PACKAGE_AVM_FIREWALL is not set
# FREETZ_PACKAGE_DOWNLOADER is not set
# FREETZ_PACKAGE_NFSD_CGI is not set
# FREETZ_PACKAGE_RRDSTATS is not set
# FREETZ_PACKAGE_SPINDOWN_CGI is not set
# FREETZ_PACKAGE_SYSLOGD_CGI is not set
# FREETZ_PACKAGE_VIRTUALIP_CGI is not set
# FREETZ_PACKAGE_WOL_CGI is not set

#
# Debug helpers
#
# FREETZ_PACKAGE_LDD is not set
# FREETZ_PACKAGE_LSOF is not set
# FREETZ_PACKAGE_LTRACE is not set
# FREETZ_PACKAGE_NANO_SHELL is not set
# FREETZ_PACKAGE_PCIUTILS is not set
# FREETZ_PACKAGE_STRACE is not set
# FREETZ_PACKAGE_USBUTILS is not set

#
# Testing
#
# FREETZ_GROUP_APACHE_PHP is not set
# FREETZ_PACKAGE_BASH is not set
# FREETZ_PACKAGE_BFUSB is not set
# FREETZ_PACKAGE_BIP is not set
# FREETZ_PACKAGE_BLUEZ_UTILS is not set
# FREETZ_PACKAGE_BR2684CTL is not set
# FREETZ_PACKAGE_CTORRENT is not set
# FREETZ_PACKAGE_DAVFS2 is not set
# FREETZ_PACKAGE_DEBOOTSTRAP is not set
# FREETZ_PACKAGE_DNS2TCP is not set
# FREETZ_PACKAGE_DTACH is not set
# FREETZ_PACKAGE_E2FSPROGS is not set
# FREETZ_PACKAGE_EMPTY is not set
FREETZ_PACKAGE_FSTYP=y
# FREETZ_PACKAGE_GNU_MAKE is not set
# FREETZ_PACKAGE_HD_IDLE is not set
# FREETZ_PACKAGE_HTTPTUNNEL is not set
# FREETZ_PACKAGE_INADYN_MT is not set
# FREETZ_PACKAGE_INOTIFY_TOOLS is not set
# FREETZ_PACKAGE_IODINE is not set
# FREETZ_PACKAGE_IRSSI is not set
# FREETZ_PACKAGE_JAMVM is not set
# FREETZ_PACKAGE_LYNX is not set
# FREETZ_PACKAGE_LUA is not set
# FREETZ_PACKAGE_MADPLAY is not set
# FREETZ_PACKAGE_MATRIXTUNNEL is not set
# FREETZ_PACKAGE_MCABBER is not set
# FREETZ_PACKAGE_MICROPERL is not set
# FREETZ_PACKAGE_MODULE_INIT_TOOLS is not set
# FREETZ_PACKAGE_NAGIOS is not set
# FREETZ_PACKAGE_NFS_UTILS is not set
# FREETZ_PACKAGE_OBEXFTP is not set
# FREETZ_PACKAGE_PORTMAP is not set
# FREETZ_PACKAGE_QUAGGA is not set
# FREETZ_PACKAGE_RRDTOOL is not set
# FREETZ_PACKAGE_RUBY is not set
# FREETZ_PACKAGE_SABLEVM_SDK is not set
# FREETZ_PACKAGE_SISPMCTL is not set
# FREETZ_PACKAGE_SOCAT is not set
# FREETZ_PACKAGE_SQUID is not set
# FREETZ_PACKAGE_STREAMRIPPER is not set
# FREETZ_PACKAGE_TCP_WRAPPERS is not set
# FREETZ_PACKAGE_TINYPROXY is not set
FREETZ_PACKAGE_TRANSMISSION=y
FREETZ_PACKAGE_TRANSMISSION_CLIENT=y
FREETZ_PACKAGE_TRANSMISSION_DAEMON=y
FREETZ_PACKAGE_TRANSMISSION_REMOTE=y
# FREETZ_PACKAGE_TRANSMISSION_STATIC is not set
FREETZ_PACKAGE_TRANSMISSION_WEBINTERFACE=y
# FREETZ_PACKAGE_TREE is not set
# FREETZ_PACKAGE_USBROOT is not set
# FREETZ_PACKAGE_VIM is not set
# FREETZ_PACKAGE_WGET is not set
# FREETZ_PACKAGE_WOL is not set
# FREETZ_PACKAGE_WPUT is not set
# FREETZ_PACKAGE_XPDF is not set
# FREETZ_PACKAGE_XRELAYD is not set
# FREETZ_SHOW_UNSTABLE_PACKAGES is not set
FREETZ_PACKAGE_HASERL=y
FREETZ_PACKAGE_MODCGI=y

#
# Advanced options
#
# FREETZ_DL_OVERRIDE is not set
FREETZ_DL_SITE="ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/deutsch"
FREETZ_DL_SOURCE="FRITZ.Box_Fon_WLAN_7170.29.04.76.image"

#
# Freetz package download sites
#
FREETZ_MOD_DL_NUM_SITES="5"

#
# Download site #1 - default: http://freetz.3dfxatwork.de
#
FREETZ_MOD_DL_SITE_1="http://freetz.3dfxatwork.de"

#
# Download site #2 - default: http://freetz.wirsind.info
#
FREETZ_MOD_DL_SITE_2="http://freetz.wirsind.info"

#
# Download site #3 - default: http://freetz.magenbrot.net
#
FREETZ_MOD_DL_SITE_3="http://freetz.magenbrot.net"

#
# Download site #4 - default: empty (reserved for later use)
#
FREETZ_MOD_DL_SITE_4=""

#
# Download site #5 - user-defined
#
FREETZ_MOD_DL_SITE_5=""
FREETZ_VERBOSITY_LEVEL=0
FREETZ_FAVICON_NONE=y
# FREETZ_FAVICON_DSL123 is not set
# FREETZ_FAVICON_CUMA is not set
# FREETZ_FAVICON_HANSOLO is not set
FREETZ_FAVICON_STRING="none"
# FREETZ_SUBVERSION_STRING is not set
# FREETZ_STATUS_STYLE is not set

#
# External
#
EXTERNAL_ENABLED=y
EXTERNAL_SUBDIRS=y
EXTERNAL_CREATEPAK=y
EXTERNAL_DIR1=y
# EXTERNAL_DIR2 is not set
# EXTERNAL_DIR3 is not set
# EXTERNAL_CUSTOM_DIR is not set
EXTERNAL_DIRECTORY="/var/media/ftp/uStor01/external/"
EXTERNAL_OWN_FILES=""

#
# packages
#
EXTERNAL_FREETZ_PACKAGE_TRANSMISSION_CLIENT=y
EXTERNAL_FREETZ_PACKAGE_TRANSMISSION_DAEMON=y
EXTERNAL_FREETZ_PACKAGE_TRANSMISSION_REMOTE=y
EXTERNAL_FREETZ_PACKAGE_TRANSMISSION_WEBINTERFACE=y

#
# services
#

#
# libraries
#
# EXTERNAL_FREETZ_LIB_libcrypto is not set
# EXTERNAL_FREETZ_LIB_libresolv is not set
# EXTERNAL_FREETZ_LIB_libcurl is not set
# FREETZ_SQUASHFS_BLOCKSIZE_ORIG is not set
# FREETZ_SQUASHFS_BLOCKSIZE_16384 is not set
# FREETZ_SQUASHFS_BLOCKSIZE_32768 is not set
FREETZ_SQUASHFS_BLOCKSIZE_65536=y
# FREETZ_SQUASHFS_BLOCKSIZE_131072 is not set

#
# BusyBox options
#
# FREETZ_BUSYBOX_AR is not set
# FREETZ_BUSYBOX_DIFF is not set
FREETZ_BUSYBOX_INETD=y
# FREETZ_BUSYBOX_IP is not set
# FREETZ_BUSYBOX_PATCH is not set
FREETZ_BUSYBOX_START_STOP_DAEMON=y
FREETZ_BUSYBOX_WGET=y
# FREETZ_BUSYBOX_LESS is not set
# FREETZ_BUSYBOX_NICE is not set
# FREETZ_BUSYBOX_LS_COLOR is not set
# FREETZ_BUSYBOX_FASTPROC is not set
# FREETZ_BUSYBOX_KEYS is not set
# FREETZ_BUSYBOX_BRCTL is not set
# FREETZ_BUSYBOX_UDHCPD is not set
# FREETZ_BUSYBOX_SEQ is not set
# FREETZ_BUSYBOX_TAC is not set
# FREETZ_BUSYBOX_MDEV_RENAME is not set
# FREETZ_BUSYBOX_MOUNT_HELPERS is not set
# FREETZ_BUSYBOX_MOUNT_LABEL is not set
# FREETZ_BUSYBOX_VOLUMEID is not set

#
# Kernel modules
#

#
# crypto
#
# FREETZ_MODULE_aes is not set
# FREETZ_MODULE_arc4 is not set
# FREETZ_MODULE_sha1 is not set
# FREETZ_MODULE_sha256 is not set

#
# drivers
#
# FREETZ_MODULE_loop is not set
# FREETZ_MODULE_nbd is not set
# FREETZ_MODULE_cdrom is not set
# FREETZ_MODULE_capiconn is not set
# FREETZ_MODULE_nand is not set
# FREETZ_MODULE_ohio_nand is not set
# FREETZ_MODULE_dummy is not set
# FREETZ_MODULE_ppp_async is not set
# FREETZ_MODULE_ppp_deflate is not set
# FREETZ_MODULE_ppp_generic is not set
# FREETZ_MODULE_pppoe is not set
# FREETZ_MODULE_pppox is not set
# FREETZ_MODULE_ppp_mppe_mppc is not set
# FREETZ_MODULE_scsi_mod is not set
# FREETZ_MODULE_sd_mod is not set
# FREETZ_MODULE_sg is not set
# FREETZ_MODULE_sr_mod is not set
# FREETZ_MODULE_slhc is not set
# FREETZ_MODULE_usblp is not set
# FREETZ_MODULE_usb_storage is not set
# FREETZ_MODULE_usbmon is not set
# FREETZ_MODULE_usbcore is not set
# FREETZ_MODULE_usbip is not set
# FREETZ_MODULE_usbip_common_mod is not set
# FREETZ_MODULE_usbserial is not set
# FREETZ_MODULE_pl2303 is not set
# FREETZ_MODULE_ftdi_sio is not set
# FREETZ_MODULE_hci_usb is not set
# FREETZ_MODULE_bfusb is not set
# FREETZ_MODULE_firmware_class is not set
# FREETZ_MODULE_dm_mod is not set
# FREETZ_MODULE_dm_crypt is not set

#
# fs
#
# FREETZ_MODULE_cifs is not set
# FREETZ_MODULE_coda is not set
# FREETZ_MODULE_ext3 is not set
# FREETZ_MODULE_ext2 is not set
# FREETZ_MODULE_fat is not set
# FREETZ_MODULE_fuse is not set
# FREETZ_MODULE_jbd is not set
# FREETZ_MODULE_lockd is not set
# FREETZ_MODULE_mini_fo is not set
# FREETZ_MODULE_minix is not set
# FREETZ_MODULE_nfsd is not set
# FREETZ_MODULE_exportfs is not set
# FREETZ_MODULE_nfs is not set
# FREETZ_MODULE_nls_cp437 is not set
# FREETZ_MODULE_nls_cp852 is not set
# FREETZ_MODULE_nls_iso8859_15 is not set
# FREETZ_MODULE_nls_iso8859_1 is not set
# FREETZ_MODULE_nls_utf8 is not set
# FREETZ_MODULE_ntfs is not set
# FREETZ_MODULE_reiserfs is not set
# FREETZ_MODULE_smbfs is not set
# FREETZ_MODULE_udf is not set
# FREETZ_MODULE_unionfs is not set
# FREETZ_MODULE_vfat is not set
# FREETZ_MODULE_msdods is not set
# FREETZ_MODULE_jffs2 is not set
# FREETZ_MODULE_mbcache is not set

#
# lib
#
# FREETZ_MODULE_crc_ccitt is not set

#
# net
#
# FREETZ_MODULE_bluetooth is not set
# FREETZ_MODULE_bnep is not set
# FREETZ_MODULE_l2cap is not set
# FREETZ_MODULE_rfcomm is not set
# FREETZ_MODULE_sunrpc is not set

#
# Shared libraries
#
# FREETZ_STRIP_LIBRARIES is not set

#
# Libraries -------------------------------
#
# FREETZ_LIB_libatm is not set
# FREETZ_LIB_libbluetooth is not set
# FREETZ_LIB_libopenobex is not set

#
# Crypto & SSL
#

#
# GnuPG ----------------------------------
#
# FREETZ_LIB_libgpg_error is not set
# FREETZ_LIB_libgcrypt is not set

#
# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libxyssl is not set
FREETZ_LIB_libcrypto=y
FREETZ_LIB_libssl=y
# FREETZ_LIB_libavmhmac is not set

#
# Data compression
#
# FREETZ_LIB_liblzo2 is not set
FREETZ_LIB_libz=y

#
# Graphics & fonts
#
# FREETZ_LIB_libfreetype is not set
# FREETZ_LIB_libart_lgpl_2 is not set
# FREETZ_LIB_libjpeg is not set
# FREETZ_LIB_libpng12 is not set

#
# uClibc
#
FREETZ_LIB_ld_uClibc=y
FREETZ_LIB_libcrypt=y
FREETZ_LIB_libdl=y
FREETZ_LIB_libm=y
FREETZ_LIB_libnsl=y
FREETZ_LIB_libpthread=y
FREETZ_LIB_libresolv=y
FREETZ_LIB_librt=y
# FREETZ_LIB_libthread_db is not set
FREETZ_LIB_libuClibc=y
# FREETZ_LIB_libutil is not set
# FREETZ_LIB_libuClibc__ is not set
FREETZ_LIB_libgcc_s=y
# FREETZ_LIB_libglib_1 is not set

#
# GLib2
#
# FREETZ_LIB_libglib_2 is not set
# FREETZ_LIB_libgobject_2 is not set
# FREETZ_LIB_libgmodule_2 is not set
# FREETZ_LIB_libgthread_2 is not set

#
# ncurses
#
# FREETZ_LIB_libncurses is not set

#
# terminfo database
#

#
# Select terminfo database entries to install (see help of 'Show all items')
#
# FREETZ_SHARE_terminfo is not set
# FREETZ_LIB_libform is not set
# FREETZ_LIB_libmenu is not set
# FREETZ_LIB_libpanel is not set
# FREETZ_LIB_libcapi20 is not set
FREETZ_LIB_libcurl=y
# FREETZ_LIB_libevent is not set
# FREETZ_LIB_libexpat is not set
# FREETZ_LIB_libid3tag is not set
# FREETZ_LIB_libltdl is not set
# FREETZ_LIB_libmad is not set
# FREETZ_LIB_libneon is not set
# FREETZ_LIB_libpcap is not set

#
# Readline
#
# FREETZ_LIB_libreadline is not set
# FREETZ_LIB_libhistory is not set
# FREETZ_LIB_libusb is not set
# FREETZ_LIB_libelf is not set
# FREETZ_LIB_libintl is not set
# FREETZ_LIB_libiconv is not set
# FREETZ_LIB_libftdi is not set
# FREETZ_LIB_libsysfs is not set
# FREETZ_LIB_libpopt is not set
# FREETZ_LIB_libdevmapper is not set

#
# Compiler options
#
FREETZ_DOWNLOAD_TOOLCHAIN=y
# FREETZ_BUILD_TOOLCHAIN is not set
FREETZ_TARGET_CROSS="mipsel-linux-uclibc-"
FREETZ_TARGET_MAKE_PATH="toolchain/target/bin"
FREETZ_TARGET_CFLAGS="-Os -pipe -march=4kc -Wa,--trap"
FREETZ_JLEVEL=2
FREETZ_KERNEL_CROSS="mipsel-unknown-linux-gnu-"
FREETZ_KERNEL_MAKE_PATH="toolchain/kernel/bin"
FREETZ_KERNEL_VERSION_2_6_13_1=y
# FREETZ_KERNEL_VERSION_2_6_19_2 is not set
FREETZ_KERNEL_VERSION="2.6.13.1"
# FREETZ_TARGET_UCLIBC_VERSION_0_9_28 is not set
FREETZ_TARGET_UCLIBC_VERSION_0_9_29=y
FREETZ_TARGET_GCC_VERSION="4.2.1"
FREETZ_TARGET_UCLIBC_VERSION="0.9.29"
FREETZ_TARGET_BINUTILS_VERSION="2.17.50.0.17"
FREETZ_TARGET_UCLIBC_REF="mod"
# FREETZ_STATIC_TOOLCHAIN is not set
FREETZ_TARGET_GXX=y
FREETZ_TARGET_CCACHE=y
# FREETZ_TARGET_NLS is not set
FREETZ_TARGET_LFS=y
FREETZ_KERNEL_GCC_VERSION="3.4.6"
FREETZ_KERNEL_BINUTILS_VERSION="2.17.50.0.17"
# FREETZ_TARGET_TOOLCHAIN is not set

#
# GNU debugger (gdb)
#
# FREETZ_PACKAGE_GDB is not set
# FREETZ_PACKAGE_GDB_SERVER is not set
# FREETZ_PACKAGE_GDB_HOST is not set

Pakete werden im Menü nicht angezeigt - liegt's an External?

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

IPPF-Promi

Neuer User

Neuer User

Aktives Mitglied

Neuer User

colonia27

Guest

IPPF-Promi

colonia27

Guest

IPPF-Urgestein

Neuer User

IPPF-Promi

Neuer User

Neuer User

Statistik des Forums