[gelöst] Webinterface ab und an nicht mehr erreichbar wo liegt das Problem ?

BoxcarRacer · 26 Okt 2008

Hallo,

vor paar Wochen mit dem Freetz angefangen und wollte mich nun an etwas mehr wagen. Und zwar wollte ich nun auch meine Restlichen Pakete einbinden und schon gibt es Probleme.

Sobald ich fritz.box eingebe ko kommt:

Code:

Firefox kann keine Verbindung zu dem Server unter 192.168.178.1 aufbauen.
Obwohl die Website gültig erscheint, konnte keine Verbindung aufgebaut werden.

Komisch ist, das ich die Box nach ein paar Stunden wieder erreiche so war es mal beim ersten mal. Erst dachte ich auf ein Fehler beim erstellen und flashte daher noch einmal. Sobald ist die Zugangsdaten eingebe ist die Verbindung zum Webinf nicht möglich (Internet geht aber).

Hier mal der Eintrag meiner Config:

Code:

/mainmenu "Freetz Configuration"

config FREETZ_HAVE_DOT_CONFIG
	bool
	default y

comment "General --------------------------------"

config FREETZ_AVM_VERSION_04_29
	bool
config FREETZ_AVM_VERSION_04_30
	bool
config FREETZ_AVM_VERSION_04_33
	bool
config FREETZ_AVM_VERSION_04_40
	bool
config FREETZ_AVM_VERSION_04_49
	bool
config FREETZ_AVM_VERSION_04_57
	bool
config FREETZ_AVM_VERSION_12043
	bool
config FREETZ_AVM_VERSION_7270
	bool
config FREETZ_AVM_VERSION_r4884
	bool
config FREETZ_AVM_VERSION_r7203
	bool
config FREETZ_AVM_VERSION_r8508
	bool

choice

	prompt "Hardware type"
		default FREETZ_TYPE_FON_WLAN_7170
		help
			Select your box type here.

	config FREETZ_TYPE_300IP_AS_FON
		select FREETZ_AVM_VERSION_04_49
		bool "300IP as Fon"
		select FREETZ_BRANDING_tcom
		select FREETZ_BRANDING_avm

	config FREETZ_TYPE_2170
		select FREETZ_AVM_VERSION_04_57
		bool "2170"

	config FREETZ_TYPE_FON
		select FREETZ_AVM_VERSION_04_49
		bool "Fon"

	config FREETZ_TYPE_FON_5010
		select FREETZ_AVM_VERSION_04_40
		bool "Fon 5010"

	config FREETZ_TYPE_FON_5050
		select FREETZ_AVM_VERSION_04_33
		bool "Fon 5050"

	config FREETZ_TYPE_FON_5140
		select FREETZ_AVM_VERSION_04_57
		bool "Fon 5140"

	config FREETZ_TYPE_FON_WLAN
		select FREETZ_AVM_VERSION_04_33
		bool "Fon WLAN"

	config FREETZ_TYPE_FON_WLAN_7050
		select FREETZ_AVM_VERSION_04_33
		bool "Fon WLAN 7050"

	config FREETZ_TYPE_FON_WLAN_7113
		select FREETZ_AVM_VERSION_04_57
		bool "Fon WLAN 7113"

	config FREETZ_TYPE_FON_WLAN_7140
		select FREETZ_AVM_VERSION_04_57
		bool "Fon WLAN 7140"

	config FREETZ_TYPE_FON_WLAN_7141
		select FREETZ_AVM_VERSION_04_57
		bool "Fon WLAN 7141"

	config FREETZ_TYPE_FON_7150
		select FREETZ_AVM_VERSION_04_57
		bool "Fon 7150"

	config FREETZ_TYPE_FON_WLAN_7170
		select FREETZ_AVM_VERSION_04_57
		bool "Fon WLAN 7170"
	
	config FREETZ_TYPE_FON_WLAN_7270
		select FREETZ_AVM_VERSION_12043
		bool "Fon WLAN 7270"
	
	config FREETZ_TYPE_WLAN_3020
		select FREETZ_AVM_VERSION_04_33
		bool "WLAN 3020"

	config FREETZ_TYPE_WLAN_3030
		select FREETZ_AVM_VERSION_04_33
		bool "WLAN 3030"

	config FREETZ_TYPE_WLAN_3130
		select FREETZ_AVM_VERSION_04_33
		bool "WLAN 3130"

	config FREETZ_TYPE_WLAN_3131
		select FREETZ_AVM_VERSION_04_57
		bool "WLAN 3131"

	config FREETZ_TYPE_WLAN_3170
		select FREETZ_AVM_VERSION_04_57
		bool "WLAN 3170"
	
	config FREETZ_TYPE_WLAN_3270
		select FREETZ_AVM_VERSION_7270
		bool "WLAN 3270"

	config FREETZ_TYPE_SPEEDPORT_W501V
		select FREETZ_AVM_VERSION_r7203
		select FREETZ_BRANDING_tcom
		bool "Speedport W501V"

	config FREETZ_TYPE_SPEEDPORT_W701V
		select FREETZ_AVM_VERSION_r8508
		select FREETZ_BRANDING_tcom
		bool "Speedport W701V"

#	config FREETZ_TYPE_SPEEDPORT_W900V
#		select FREETZ_AVM_VERSION_r4884
#		select FREETZ_BRANDING_tcom
#		bool "Speedport W900V"

	config FREETZ_TYPE_CUSTOM
		bool "Custom"
		depends on FREETZ_SHOW_ADVANCED
		select FREETZ_DL_OVERRIDE

endchoice

config FREETZ_TYPE_FON_WLAN_7270_16MB
	bool "16 MB flash"
	depends on \
		FREETZ_TYPE_FON_WLAN_7270
	default n
	help
		Enable this to build an image for boxes with 16 MB flash.

config FREETZ_TYPE_LABOR
	bool "Beta/Labor/VPN"
	depends on \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_FON_WLAN_7270
	default n
	help
		Enable this to compile the mod based on an AVM "beta/labor/vpn" firmware.

choice

	prompt "Labor version"
		depends on FREETZ_TYPE_LABOR
		default FREETZ_TYPE_LABOR_MINI

#	config FREETZ_TYPE_LABOR_BETA
#		bool "BETA"
#		depends on \
#			( \
#			FREETZ_TYPE_FON_WLAN_7170 || \
#			FREETZ_TYPE_FON_WLAN_7270 \
#			)

	config FREETZ_TYPE_LABOR_ALL
		bool "All In One"
		depends on \
			( \
			FREETZ_TYPE_FON_WLAN_7170 || \
			FREETZ_TYPE_FON_WLAN_7270 \
			)

	config FREETZ_TYPE_LABOR_DSL
		bool "DSL"
		depends on \
			( \
			FREETZ_TYPE_FON_WLAN_7170 || \
			FREETZ_TYPE_FON_WLAN_7270 \
			)

	config FREETZ_TYPE_LABOR_GAMING
		bool "GAMING"
		depends on ( \
			FREETZ_TYPE_FON_WLAN_7170 || \
			FREETZ_TYPE_FON_WLAN_7270 \
		)

	config FREETZ_TYPE_LABOR_MINI
		bool "MINI"
		depends on \
			FREETZ_TYPE_FON_WLAN_7141 || \
			FREETZ_TYPE_FON_WLAN_7170 || \
			FREETZ_TYPE_FON_WLAN_7270
	
	config FREETZ_TYPE_LABOR_PHONE
		bool "PHONE"
		depends on \
			FREETZ_TYPE_FON_WLAN_7270

	config FREETZ_TYPE_LABOR_WLAN
		bool "Labor WLAN / 11n"
		depends on \
			FREETZ_TYPE_FON_WLAN_7270

endchoice

config FREETZ_TYPE_ALIEN_HARDWARE
	bool "Compile image for \"alien\" hardware"
	depends on \
		FREETZ_TYPE_FON_WLAN_7170
	default n
	help
		Enable this to compile the mod image for another hardware type

choice
	prompt "Alien hardware type"
	depends on FREETZ_TYPE_ALIEN_HARDWARE
	#default FREETZ_TYPE_SINUS_W500V_7150 if FREETZ_TYPE_FON_7150
	default FREETZ_TYPE_SPEEDPORT_W701V_7170 if FREETZ_TYPE_FON_WLAN_7170

	#config FREETZ_TYPE_SINUS_W500V_7150
	#	bool "Sinus W500V"
	#	depends on FREETZ_TYPE_FON_7150
	#	select FREETZ_BRANDING_tcom
	#	select FREETZ_MODULE_jffs2
	#	help
	#		Enable this to compile a mod image for T-Com Sinus W500V based
	#		on a 7150 image.

	config FREETZ_TYPE_SPEEDPORT_W701V_7170
		bool "W701V"
		depends on FREETZ_TYPE_FON_WLAN_7170
		select FREETZ_BRANDING_tcom
		help
			Enable this to compile a mod image for T-Com Speedport W701V based
			on a 7170 image.

	config FREETZ_TYPE_SPEEDPORT_W900V_7170
		bool "W900V"
		depends on FREETZ_TYPE_FON_WLAN_7170
		select FREETZ_BRANDING_tcom
		help
			Enable this to compile a mod image for T-Com Speedport W900V based
			on a 7170 image.

endchoice

config FREETZ_AVM_VERSION_STRING
	string
	default "04.29"			if FREETZ_AVM_VERSION_04_29
	default "04.30"			if FREETZ_AVM_VERSION_04_30
	default "04.33"			if FREETZ_AVM_VERSION_04_33
	default "04.40"			if FREETZ_AVM_VERSION_04_40
	default "04.49"			if FREETZ_AVM_VERSION_04_49
	default "04.57"			if FREETZ_AVM_VERSION_04_57
	default "7270"			if FREETZ_AVM_VERSION_7270
	default "12043"			if FREETZ_AVM_VERSION_12043
	default "r4884"			if FREETZ_AVM_VERSION_r4884
	default "r7203"			if FREETZ_AVM_VERSION_r7203
	default "r8508"			if FREETZ_AVM_VERSION_r8508

choice

	prompt "Firmware language"
		default FREETZ_TYPE_LANG_DE

	config FREETZ_TYPE_LANG_DE
		bool "de - deutsch"
		depends on \
			! FREETZ_TYPE_FON_5010

	config FREETZ_TYPE_LANG_A_CH
		bool "a-ch - deutsch"
		depends on \
			! FREETZ_TYPE_LABOR && \
			! FREETZ_TYPE_ALIEN_HARDWARE && \
			( \
			FREETZ_TYPE_FON_5010 || \
			FREETZ_TYPE_FON_WLAN_7140 || \
			FREETZ_TYPE_FON_WLAN_7170 \
			)

	config FREETZ_TYPE_LANG_EN
		bool "en - international"
		depends on \
			! FREETZ_TYPE_LABOR && \
			! FREETZ_TYPE_ALIEN_HARDWARE && \
			( \
			FREETZ_TYPE_FON || \
			FREETZ_TYPE_300IP_AS_FON || \
			FREETZ_TYPE_FON_WLAN || \
			FREETZ_TYPE_FON_WLAN_7140 || \
			FREETZ_TYPE_FON_WLAN_7170 \
			)

endchoice

config FREETZ_TYPE_LANG_STRING
	string
	default "de"		if FREETZ_TYPE_LANG_DE
	default "a-ch"		if FREETZ_TYPE_LANG_A_CH
	default "en"		if FREETZ_TYPE_LANG_EN

choice

	prompt "Annex"
		depends on FREETZ_TYPE_LANG_EN
		default FREETZ_TYPE_ANNEX_B

	config FREETZ_TYPE_ANNEX_A
		bool "A"

	config FREETZ_TYPE_ANNEX_B
		bool "B"

endchoice

config FREETZ_TYPE_STRING
	string
	default "300ip_as_fon"					if FREETZ_TYPE_300IP_AS_FON
	default "2170"						if FREETZ_TYPE_2170 && ! FREETZ_TYPE_LABOR
	default "3020"						if FREETZ_TYPE_WLAN_3020
	default "3030"						if FREETZ_TYPE_WLAN_3030
	default "3130"						if FREETZ_TYPE_WLAN_3130
	default "3131"						if FREETZ_TYPE_WLAN_3131
	default "3170"						if FREETZ_TYPE_WLAN_3170
	default "3270"						if FREETZ_TYPE_WLAN_3270
	default "fon"						if FREETZ_TYPE_FON
	default "5010"						if FREETZ_TYPE_FON_5010
	default "5050"						if FREETZ_TYPE_FON_5050
	default "5140"						if FREETZ_TYPE_FON_5140
	default "fon_wlan"					if FREETZ_TYPE_FON_WLAN
	default "7050"						if FREETZ_TYPE_FON_WLAN_7050
	default "7113"						if FREETZ_TYPE_FON_WLAN_7113
	default "7140"						if FREETZ_TYPE_FON_WLAN_7140
	default "7141"						if FREETZ_TYPE_FON_WLAN_7141 && ! FREETZ_TYPE_LABOR
	default "7141_labor_mini"				if FREETZ_TYPE_FON_WLAN_7141 && FREETZ_TYPE_LABOR_MINI
	default "7150"						if FREETZ_TYPE_FON_7150
	default "7170"						if FREETZ_TYPE_FON_WLAN_7170 && ! FREETZ_TYPE_LABOR
	default "7170_beta"					if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_BETA
	default "7170_labor_all"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_ALL
	default "7170_labor_dsl"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_DSL
	default "7170_labor_gaming"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_GAMING
	default "7170_labor_mini"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_MINI
	default "7170_labor_phone"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_PHONE
	default "7270"						if FREETZ_TYPE_FON_WLAN_7270 && ! FREETZ_TYPE_LABOR
	default "7270_beta"					if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_BETA
	default "7270_labor_all"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_ALL
	default "7270_labor_dsl"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_DSL
	default "7270_labor_mini"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_MINI
	default "7270_labor_phone"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_PHONE
	default "7270_labor_gaming"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_GAMING
	default "7270_labor_wlan"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_WLAN
	default "W501V"						if FREETZ_TYPE_SPEEDPORT_W501V
	default "W701V"						if FREETZ_TYPE_SPEEDPORT_W701V
	default "W900V"						if FREETZ_TYPE_SPEEDPORT_W900V
	default "custom"					if FREETZ_TYPE_CUSTOM

config FREETZ_TYPE_STRING2
	string
	default "W500V_"					if FREETZ_TYPE_SINUS_W500V_7150
	default "W701V_"					if FREETZ_TYPE_SPEEDPORT_W701V_7170
	default "W900V_"					if FREETZ_TYPE_SPEEDPORT_W900V_7170

comment "Custom options -------------------------"
	depends on FREETZ_TYPE_CUSTOM

config FREETZ_INSTALL_BASE
	bool
	select FREETZ_LIB_ld_uClibc
	select FREETZ_LIB_libcrypt
	select FREETZ_LIB_libdl
	select FREETZ_LIB_libgcc_s
	select FREETZ_LIB_libm
	select FREETZ_LIB_libnsl
	select FREETZ_LIB_libpthread
	select FREETZ_LIB_librt
	select FREETZ_LIB_libuClibc
	default y
	help
		This is mandatory

config FREETZ_REPLACE_BUSYBOX
	bool
	default y
	help
		This is mandatory

config FREETZ_REPLACE_KERNEL_AVAILABLE
	bool
	depends on \
		! FREETZ_TYPE_LABOR && \
		! (FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN) && \
		! FREETZ_TYPE_WLAN_3270
	default y

config FREETZ_REPLACE_KERNEL
	bool "Replace kernel"
	depends on \
		FREETZ_SHOW_ADVANCED && \
		FREETZ_REPLACE_KERNEL_AVAILABLE
	default n
	help
		Replace AVM kernel with self-built kernel.

comment "Replace kernel (currently not available)"
	depends on \
		FREETZ_SHOW_ADVANCED && \
		! FREETZ_REPLACE_KERNEL_AVAILABLE

config FREETZ_SHOW_ADVANCED
	bool "Show advanced options"
	default n
	help
		Show advanced Options for patching the firmware. This is only useful
		for experienced users who really know what they are doing

config FREETZ_TARGET_REF
	string "Target ref"		if FREETZ_TYPE_CUSTOM
	default "8mb_26"		if \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W900V || \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_WLAN_7140 || \
		FREETZ_TYPE_FON_7150 || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_FON_WLAN_7270 || \
		FREETZ_TYPE_WLAN_3270 
	default "4mb_26"		if \
		FREETZ_TYPE_2170 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_WLAN_3020 || \
		FREETZ_TYPE_WLAN_3030 || \
		FREETZ_TYPE_WLAN_3130 || \
		FREETZ_TYPE_WLAN_3131 || \
		FREETZ_TYPE_WLAN_3170 || \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON_5010 || \
		FREETZ_TYPE_FON_5050 || \
		FREETZ_TYPE_FON_5140 || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050

config FREETZ_KERNEL_REF
	string "Kernel ref"		if FREETZ_TYPE_CUSTOM
	default "8mb_26"		if \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_FON_WLAN_7140 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_7150 || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W900V || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_FON_WLAN_7270 || \
		FREETZ_TYPE_WLAN_3270 
	default "4mb_26"		if \
		FREETZ_TYPE_2170 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_WLAN_3020 || \
		FREETZ_TYPE_WLAN_3030 || \
		FREETZ_TYPE_WLAN_3130 || \
		FREETZ_TYPE_WLAN_3131 || \
		FREETZ_TYPE_WLAN_3170 || \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON_5010 || \
		FREETZ_TYPE_FON_5050 || \
		FREETZ_TYPE_FON_5140 || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050

config FREETZ_KERNEL_LAYOUT
	string "Kernel ref"		if FREETZ_TYPE_CUSTOM
	default "ohio"			if \
		FREETZ_TYPE_2170 || \
		FREETZ_TYPE_FON_5140 || \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_FON_WLAN_7140 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_7150 || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_WLAN_3130 || \
		FREETZ_TYPE_WLAN_3131 || \
		FREETZ_TYPE_WLAN_3170 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W900V
	default "ar7"			if \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON_5010 || \
		FREETZ_TYPE_FON_5050 || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050 || \
		FREETZ_TYPE_WLAN_3020 || \
		FREETZ_TYPE_WLAN_3030
	default "ur8"			if \
		FREETZ_TYPE_FON_WLAN_7270 || \
		FREETZ_TYPE_WLAN_3270 

	
config FREETZ_KERNEL_MTD_SIZE
	int "Kernel (64K blocks)"	if FREETZ_TYPE_CUSTOM
	default 59				if \
		FREETZ_TYPE_2170 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_WLAN_3020 || \
		FREETZ_TYPE_WLAN_3030 || \
		FREETZ_TYPE_WLAN_3130 || \
		FREETZ_TYPE_WLAN_3131 || \
		FREETZ_TYPE_WLAN_3170 || \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON_5010 || \
		FREETZ_TYPE_FON_5050 || \
		FREETZ_TYPE_FON_5140 || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050
	default 119					if \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_FON_WLAN_7140 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_7150 || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W900V || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		(FREETZ_TYPE_FON_WLAN_7270 && ! FREETZ_TYPE_FON_WLAN_7270_16MB) || \
		FREETZ_TYPE_CUSTOM && FREETZ_HIDDEN_ROOT
	default 246					if \
		FREETZ_TYPE_WLAN_3270 || \
		FREETZ_TYPE_FON_WLAN_7270_16MB
	help
		Number of 64K blocks in the kernel mtd device.

config FREETZ_FILESYSTEM_MTD_SIZE
	int "Filesystem (64K blocks)"	if FREETZ_TYPE_CUSTOM
	depends on ! FREETZ_HIDDEN_ROOT || FREETZ_CONTIGUOUS_HIDDEN_ROOT
	default 48			if FREETZ_TYPE_CUSTOM
	help
		Number of 64K blocks in the filesystem mtd device.

config FREETZ_HAS_PHONE
	bool "Has Phone"		if FREETZ_TYPE_CUSTOM
	default y				if \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON_5010 || \
		FREETZ_TYPE_FON_5050 || \
		FREETZ_TYPE_FON_5140 || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050 || \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_FON_WLAN_7140 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_7150 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W900V || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_FON_WLAN_7270 || \
		FREETZ_TYPE_CUSTOM
	default n				if \
		FREETZ_TYPE_2170 || \
		FREETZ_TYPE_WLAN_3020 || \
		FREETZ_TYPE_WLAN_3030 || \
		FREETZ_TYPE_WLAN_3130 || \
		FREETZ_TYPE_WLAN_3131 || \
		FREETZ_TYPE_WLAN_3170 || \
		FREETZ_TYPE_WLAN_3270

	help
		Select this if you have a box with phone support.

config FREETZ_HAS_WLAN
	bool "Has WLAN"		if FREETZ_TYPE_CUSTOM
	default y			if \
		FREETZ_TYPE_WLAN_3131 || \
		FREETZ_TYPE_WLAN_3130 || \
		FREETZ_TYPE_WLAN_3170 || \
		FREETZ_TYPE_WLAN_3270 || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050 || \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_FON_WLAN_7140 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_7150 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W900V || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_FON_WLAN_7270 || \
		FREETZ_TYPE_CUSTOM
	default n			if \
		FREETZ_TYPE_2170 || \
		FREETZ_TYPE_FON_5010 || \
		FREETZ_TYPE_FON_5050 || \
		FREETZ_TYPE_FON_5140 || \
		FREETZ_TYPE_300IP_AS_FON
	help
		Select this if you have a box with WLAN.

config FREETZ_HAS_USB_CLIENT
	bool "USB client"		if FREETZ_TYPE_CUSTOM
	default y				if \
		FREETZ_TYPE_2170 || \
		FREETZ_TYPE_WLAN_3020 || \
		FREETZ_TYPE_WLAN_3030 || \
		FREETZ_TYPE_WLAN_3130 || \
		FREETZ_TYPE_WLAN_3131 || \
		FREETZ_TYPE_WLAN_3170 || \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON_5050 || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050
	default n				if \
		FREETZ_TYPE_FON_5010 || \
		FREETZ_TYPE_FON_5140 || \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_FON_WLAN_7140 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_7150 || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_FON_WLAN_7270 || \
		FREETZ_TYPE_WLAN_3270 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W900V || \
		FREETZ_TYPE_CUSTOM
	help
		Select this if you have a box with USB.

config FREETZ_HAS_USB_HOST
	bool "USB host"		if FREETZ_TYPE_CUSTOM
	default y			if \
		FREETZ_TYPE_2170 || \
		FREETZ_TYPE_FON_WLAN_7140 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_7150 && ! FREETZ_TYPE_SINUS_W500V_7150 || \
		FREETZ_TYPE_FON_WLAN_7170 && ! FREETZ_TYPE_SPEEDPORT_W701V_7170 || \
		FREETZ_TYPE_FON_WLAN_7270 || \
		FREETZ_TYPE_WLAN_3130 || \
		FREETZ_TYPE_WLAN_3131 || \
		FREETZ_TYPE_WLAN_3170 || \
		FREETZ_TYPE_WLAN_3270 || \
		FREETZ_TYPE_SPEEDPORT_W900V
	default n			if \
		FREETZ_TYPE_WLAN_3020 || \
		FREETZ_TYPE_WLAN_3030 || \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON_5010 || \
		FREETZ_TYPE_FON_5050 || \
		FREETZ_TYPE_FON_5140 || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050 || \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SINUS_W500V_7150 || \
		FREETZ_TYPE_SPEEDPORT_W701V_7170 
	help
		Select this if your USB port is a host adapter

menu "Branding"
	depends on \
		! FREETZ_TYPE_SPEEDPORT_W501V && \
		! FREETZ_TYPE_SPEEDPORT_W701V && \
		! FREETZ_TYPE_SPEEDPORT_W900V

#comment "Brandings ------------------------------"
#	depends on \
#		( \
#		! FREETZ_TYPE_SPEEDPORT_W501V && \
#		! FREETZ_TYPE_SPEEDPORT_W701V && \
#		! FREETZ_TYPE_SPEEDPORT_W900V && \
#		! FREETZ_TYPE_CUSTOM \
#		)

#comment "Brandings (if exist) -------------------"
#	depends on FREETZ_TYPE_CUSTOM && FREETZ_SHOW_ADVANCED

config FREETZ_BRANDING_1und1
	bool "1&1"
	depends on \
		FREETZ_TYPE_LANG_DE && \
		( \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_FON_5050 || \
		FREETZ_TYPE_FON_5140 || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050 || \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_FON_WLAN_7270 || \
		FREETZ_TYPE_WLAN_3020 || \
		FREETZ_TYPE_WLAN_3030 || \
		FREETZ_TYPE_WLAN_3130 || \
		FREETZ_TYPE_CUSTOM \
		) \
		&& ! FREETZ_TYPE_ALIEN_HARDWARE
	default y
	help
		1&1 branding

		Each branding provides the web UI templates for a certain manufacturer or OEM.

		NOTE: Make sure to choose at least one branding corresponding to the one
		defined in your box's boot loader environment. It can be determined by calling
		the following command from the box's shell prompt:

		echo $(cat /proc/sys/urlader/firmware_version)

config FREETZ_BRANDING_avm
	bool "AVM"
	depends on \
		( \
		! FREETZ_BRANDING_tcom && \
		FREETZ_TYPE_LANG_A_CH || \
		FREETZ_TYPE_LANG_DE || \
		FREETZ_TYPE_CUSTOM \
		)
	default y
	help
		AVM branding

		Each branding provides the web UI templates for a certain manufacturer or OEM.

		NOTE: Make sure to choose at least one branding corresponding to the one
		defined in your box's boot loader environment. It can be determined by calling
		the following command from the box's shell prompt:

		echo $(cat /proc/sys/urlader/firmware_version)

config FREETZ_BRANDING_avme
	bool "AVM international"
	depends on \
		( \
		FREETZ_TYPE_LANG_EN || \
		FREETZ_TYPE_CUSTOM \
		)
	default y
	help
		AVM international branding

		Each branding provides the web UI templates for a certain manufacturer or OEM.

		NOTE: Make sure to choose at least one branding corresponding to the one
		defined in your box's boot loader environment. It can be determined by calling
		the following command from the box's shell prompt:

		echo $(cat /proc/sys/urlader/firmware_version)

config FREETZ_BRANDING_aol
	bool "AOL"
	depends on \
		FREETZ_TYPE_LANG_DE && \
		( \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_FON_WLAN_7140 || \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_CUSTOM \
		)
	default y
	help
		AOL branding

		Each branding provides the web UI templates for a certain manufacturer or OEM.

		NOTE: Make sure to choose at least one branding corresponding to the one
		defined in your box's boot loader environment. It can be determined by calling
		the following command from the box's shell prompt:

		echo $(cat /proc/sys/urlader/firmware_version)

config FREETZ_BRANDING_arcor
	bool "Arcor"
	depends on FREETZ_TYPE_CUSTOM
	default y
	help
		Arcor branding

		Each branding provides the web UI templates for a certain manufacturer or OEM.

		NOTE: Make sure to choose at least one branding corresponding to the one
		defined in your box's boot loader environment. It can be determined by calling
		the following command from the box's shell prompt:

		echo $(cat /proc/sys/urlader/firmware_version)

config FREETZ_BRANDING_congstar
	bool "Congstar"
	depends on \
		FREETZ_TYPE_SPEEDPORT_W701V 
	default y
	help
		Congstar branding

		Each branding provides the web UI templates for a certain manufacturer or OEM.

		NOTE: Make sure to choose at least one branding corresponding to the one
		defined in your box's boot loader environment. It can be determined by calling
		the following command from the box's shell prompt:

		echo $(cat /proc/sys/urlader/firmware_version)

config FREETZ_BRANDING_freenet
	bool "Freenet"
	depends on \
		FREETZ_TYPE_LANG_DE && \
		( \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_FON_7150 || \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON_WLAN_7113 || \
		FREETZ_TYPE_FON_WLAN_7141 || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_CUSTOM \
		) \
		&& ! FREETZ_TYPE_ALIEN_HARDWARE
	default y
	help
		Freenet branding

		Each branding provides the web UI templates for a certain manufacturer or OEM.

		NOTE: Make sure to choose at least one branding corresponding to the one
		defined in your box's boot loader environment. It can be determined by calling
		the following command from the box's shell prompt:

		echo $(cat /proc/sys/urlader/firmware_version)

config FREETZ_BRANDING_tcom
	bool "T-Com"
	depends on \
		FREETZ_TYPE_LANG_DE && \
		( \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W900V || \
		FREETZ_TYPE_ALIEN_HARDWARE \
		)
	default y
	help
		T-Com branding

		Each branding provides the web UI templates for a certain manufacturer or OEM.

		NOTE: Make sure to choose at least one branding corresponding to the one
		defined in your box's boot loader environment. It can be determined by calling
		the following command from the box's shell prompt:

		echo $(cat /proc/sys/urlader/firmware_version)

config FREETZ_BRANDING_versatel
	bool "Versatel"
	depends on \
		FREETZ_TYPE_WLAN_3131
	default y
	help
		Versatel branding

		Each branding provides the web UI templates for a certain manufacturer or OEM.

		NOTE: Make sure to choose at least one branding corresponding to the one
		defined in your box's boot loader environment. It can be determined by calling
		the following command from the box's shell prompt:

		echo $(cat /proc/sys/urlader/firmware_version)

endmenu

comment "Mod ------------------------------------"

choice

	prompt "Language"
	default FREETZ_LANG_DE		if FREETZ_TYPE_LANG_DE
	default FREETZ_LANG_DE		if FREETZ_TYPE_LANG_A_CH
	default FREETZ_LANG_EN		if FREETZ_TYPE_LANG_EN

	config FREETZ_LANG_DE
		bool "de - deutsch"

	config FREETZ_LANG_EN
		bool "en - english"

endchoice

config FREETZ_LANG_STRING
	string
	default "de"			if FREETZ_LANG_DE
	default "en"			if FREETZ_LANG_EN

menu "Patches"

config FREETZ_REMOVE_HELP
	bool "Remove help"
	default n
	help
		Removes the help pages from the web menu.

config FREETZ_REMOVE_ASSISTANT
	bool "Remove assistant"
	default n
	depends on \
		! FREETZ_TYPE_FON_WLAN_7270
	help
		Removes the installation assistant from the web menu.

config FREETZ_REMOVE_TR069
	bool "Remove tr069 stuff"
	depends on \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050 || \
		FREETZ_TYPE_FON_7150 || \
		FREETZ_TYPE_FON_WLAN_7170 || \
		FREETZ_TYPE_FON_WLAN_7270
	default n
	help
		Removes libtr069 to save space.

config FREETZ_REMOVE_USB_MODULE
	bool "Remove avalanche_usb.ko"
	depends on \
		FREETZ_SHOW_ADVANCED && \
		( \
		FREETZ_TYPE_300IP_AS_FON || \
		FREETZ_TYPE_FON || \
		FREETZ_TYPE_FON_WLAN || \
		FREETZ_TYPE_FON_WLAN_7050 \
		)
	default n
	help
		Removes avalanche_usb.ko to save space.

config FREETZ_REMOVE_CDROM_ISO
	bool "Remove cdrom.iso"
	depends on \
			FREETZ_HAS_USB_CLIENT && \
			( \
			! FREETZ_TYPE_2170 && \
			! FREETZ_TYPE_FON_WLAN_7050 && \
			! FREETZ_TYPE_WLAN_3130 && \
			! FREETZ_TYPE_WLAN_3170 \
			)
	default n
	help
		Removes the file /lib/modules/cdrom.iso.

config FREETZ_PATCH_ATA
	bool "Patch ATA"
	depends on \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W900V
	default n
	help
		Patches the ATA mode configuration pages into the web menu.

config FREETZ_PATCH_DSL_EXPERT
        bool "Patch extended DSL-Settings"
        depends on \
					FREETZ_TYPE_LABOR_ALL
        default n
        help
                Patches the extended dsl-settings from labor-dsl into all-in-one-firmwares. 

config FREETZ_PATCH_ENUM
	bool "Patch enum"
	depends on FREETZ_HAS_PHONE
	default n
	help
		Patches the enum configuration pages into the web menu.

#config FREETZ_PATCH_INTERNATIONAL
#	bool "Patch international"
#	depends on FREETZ_HAS_PHONE && FREETZ_TYPE_LANG_DE && ! FREETZ_TYPE_SPEEDPORT_W900V
#	default y
#	help
#		Reveals some options from the international firmware in the web menu.

config FREETZ_PATCH_SIGNED
	bool "Patch web menu signed message"
	default n
	help
		Hides the "unsupported changes" message from the web interface.

config FREETZ_PATCH_USBSTORAGE
	bool "Patch USB storage names, make FAT filesystems world-writable, automount feature"
	depends on \
		FREETZ_HAS_USB_HOST #&& \
		#! FREETZ_TYPE_SPEEDPORT_W701V_7170
	default y
	help
		1. Change the name of USB storage dir to uStorXY

		2. Auto-mounted USB storage devices will be fully accessible, i.e. it
		is now possible to put user home directories for (e.g. for FTP) on a
		FAT32-formatted partition and permit shell and FTP users to actually
		write to their own home directories.

		3. Avoid deleting whole filesystem on usb devices.

		It is highly recommended to select this patch.

config FREETZ_USBSTORAGE_AUTOMOUNT
	bool "Automount filesystems"
	depends on FREETZ_PATCH_USBSTORAGE
	select FREETZ_PACKAGE_FSTYP
	default y
	help
		ext2, ext3, fat and ntfs filesystems are mounted automatically. Detection is done
		by fstyp utility (adds about 8KB uncompressed size). It depends on the original
		firmware wich of the following points you have to select.

config FREETZ_AUTOMOUNT_EXT2
	bool "ext2"
	depends on FREETZ_USBSTORAGE_AUTOMOUNT
	select FREETZ_MODULE_ext2
	default n
	help
		This adds ext2 module to your firmware.

config FREETZ_AUTOMOUNT_EXT3
	bool "ext3"
	depends on FREETZ_USBSTORAGE_AUTOMOUNT
	select FREETZ_MODULE_ext3
	default n
	help
		This adds ext3 module to your firmware.		

config FREETZ_AUTOMOUNT_NTFS
	bool "NTFS"
	depends on FREETZ_USBSTORAGE_AUTOMOUNT
	select FREETZ_PACKAGE_NTFS
	default n
	help
		This adds ntfs-3g mount helper to your firmware.

config FREETZ_AUTORUN_AUTOEND
	bool "Execute autorun.sh/autoend.sh script on (un)mount"
	depends on FREETZ_HAS_USB_HOST
	default n
	help
		Useful to start/terminate applications located on USB devices, eg apache,
		samba or even swapfiles.

config FREETZ_PATCH_MAXDEVCOUNT
	bool "Raise the count of connectable usb device to 9"
	depends on FREETZ_HAS_USB_HOST
	default n
	help
		Use this patch if you would connect more than 3 device to the box

config FREETZ_PATCH_GETCONS
	bool "Don't redirect console messages"
	default n
	help
		Patch /etc/profile so that console messages are not redirected to
		/dev/pts/0. These can sometimes be very anoying.

config FREETZ_REMOVE_WEBSRV
	bool "Replace AVM web server by httpd"
	depends on \
		! FREETZ_TYPE_2170 \
		&& ! FREETZ_TYPE_FON_5140 \
		&& ! ( FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN ) \
		&& ! ( FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_A_CH ) \
		&& ! ( FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN ) \
		&& ! ( FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN ) \
		&& ! ( FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN ) \
		&& ! FREETZ_TYPE_FON_WLAN_7141 \
		&& ! FREETZ_TYPE_FON_WLAN_7170 \
		&& ! FREETZ_TYPE_FON_WLAN_7270 \
		&& ! FREETZ_TYPE_WLAN_3131 \
		&& ! FREETZ_TYPE_WLAN_3170

	default n
	help
		Patch init scripts so BusyBox's httpd is used instead of AVM's websrv.
		The websrv binary will be removed from the firmware image.

		If "Remove UPnP daemon (igdd)" patch is also selected and "Integrate
		Media Server from USB Labor firmware" is not selected, 'libwebsrv.so'
		will also be removed, because only those three binaries use it.

config FREETZ_REMOVE_UPNP
	bool "Remove UPnP daemon (igdd)"
	select FREETZ_REMOVE_UPNP_LIBS if \
			( \
			! ( FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN ) \
			&& ! ( FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_A_CH ) \
			&& ! FREETZ_TYPE_FON_WLAN_7141 \
			&& ! FREETZ_TYPE_FON_WLAN_7170 \
			&& ! FREETZ_TYPE_FON_WLAN_7270 \
			&& ! FREETZ_TYPE_WLAN_3131 \
			&& ! FREETZ_TYPE_WLAN_3170 \
			)
	default n
	help
		Remove Universal Plug'n'Play daemon 'igdd' and some more files used by
		it from firmware. Patch init scripts so they can cope with the
		non-existent binary.

		ATTENTION: Fritz!Fax relies on UPnP.
		Make sure you deactivate all UPnP features in the web menu
		before updating the firmware with this option. It may not be harmful
		not to deactivate it, but there is no guarantee. You can find the
		settings in the German web UI under
		  Einstellungen
		    System
		      Netzwerkeinstellungen
		        Statusinformationen über UPnP übertragen (empfohlen)

config FREETZ_REMOVE_UPNP_LIBS
	bool 
	depends on FREETZ_REMOVE_UPNP
	default n

config FREETZ_REMOVE_USERMAN
	bool "Remove usermand and userman.ko - EXPERIMENTAL"
	depends on \
		! FREETZ_TYPE_FON_5140 \
		&& ! FREETZ_TYPE_FON_WLAN_7113 \
		&& ! FREETZ_TYPE_SPEEDPORT_W501V \
		&& ! FREETZ_TYPE_SPEEDPORT_W900V
	default n
	help
		Remove userman files (Kindersicherung)

config FREETZ_REMOVE_FTPD
	bool "Remove ftpd"
	depends on \
		FREETZ_SHOW_ADVANCED && \
		( \
			FREETZ_HAS_USB_HOST && \
			! FREETZ_TYPE_SPEEDPORT_W701V_7170 \\
		)
	default n
	help
		Remove FTP deamon (ftpd)
		This patch removes AVM's ftp daemon. The regular options in AVM's Webinterface
		are still present. If you select this item your USB drives won't be accessible 
		through ftp anymore. But you can use Freetz bftpd/vsftpd package to grant ftp
		access to the devices.

config FREETZ_REMOVE_MEDIASRV
	bool "Remove mediasrv"
	depends on \
	FREETZ_SHOW_ADVANCED && \
	! FREETZ_PATCH_MEDIASRV && \
	( \
		FREETZ_HAS_USB_HOST && \
		! FREETZ_TYPE_SPEEDPORT_W701V_7170 \
	)
	default n
	help
		Remove MediaServer daemon (mediasrv)
		This patch removes only the deamon. The regular options in AVM's webinterface 
		are still present.

config FREETZ_REMOVE_SMBD
	bool "Remove smbd"
	depends on \
		FREETZ_SHOW_ADVANCED && \
		! FREETZ_PACKAGE_SAMBA && \
		( \
		(FREETZ_HAS_USB_HOST && ! FREETZ_TYPE_FON_7150) && \
		! FREETZ_TYPE_SPEEDPORT_W701V_7170 \
		)
	default n
	help
		Remove Samba daemon (smbd)
		This patch removes only the daemon. The regular options in AVM's webinterface 
		are still present.

config FREETZ_REMOVE_MINID
	bool "Remove minid - EXPERIMENTAL"
	default n
	depends on \
		FREETZ_SHOW_ADVANCED && \
		( \
			FREETZ_TYPE_FON_WLAN_7141 || \
			FREETZ_TYPE_FON_WLAN_7170 || \
			FREETZ_TYPE_WLAN_3270 \
		) && \
		! FREETZ_TYPE_SPEEDPORT_W701V_7170
		
	help
		Remove the mini-daemon (minid) and some other related files.
		This patch removes Fritz!Mini support but only the files,
		not the settings in AVM's webinterface.

config FREETZ_REMOVE_AURA_USB
	bool "Remove aura usb - EXPERIMENTAL"
	default n
	depends on \
		FREETZ_SHOW_ADVANCED && \
		( \
			FREETZ_TYPE_2170 || \
			FREETZ_TYPE_FON_7150 || \
			FREETZ_TYPE_FON_WLAN_7141 || \
			FREETZ_TYPE_FON_WLAN_7170 || \
			FREETZ_TYPE_WLAN_3170 \
		) && \
		! FREETZ_TYPE_SPEEDPORT_W701V_7170

	help
		Remove the aura-usb-daemon (USB-Fernanschluss) and some related files. 
		This patch only removes the files, not the settings in AVM's webinterface

config FREETZ_REMOVE_AVM_VPN
	bool "Remove AVM vpn - EXPERIMENTAL"
	default n
	depends on \
		FREETZ_SHOW_ADVANCED && \
		( \
			FREETZ_TYPE_2170 || \
			(FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_DE) || \
			FREETZ_TYPE_FON_WLAN_7270 || \
			FREETZ_TYPE_WLAN_3170 \
		)

	help
		Remove AVM's vpn and some other related files
		This patch only removes the files, not the settings in AVM's webinterface

config FREETZ_REMOVE_DSLD
	bool "Remove dsld (for boxes in IP client mode) - EXPERIMENTAL"	
	default n
	depends on FREETZ_SHOW_ADVANCED
	select FREETZ_REMOVE_UPNP
	select FREETZ_REMOVE_USERMAN if ! (FREETZ_TYPE_FON_5140 || FREETZ_TYPE_FON_WLAN_7113 || FREETZ_TYPE_SPEEDPORT_W501V || FREETZ_TYPE_SPEEDPORT_W900V)
	help
		Remove DSL deamon (dsld), if you are planning to use your box as a simple
		IP client in ATA mode.

		ATTENTION: Do *not* use this option if your ATA mode box uses PPoE
		passthrough, because in this case dsld is still needed! Furthermore,
		selecting this patch also selects the UPnP patch, because UPnP must be
		deactivated anyway for IP clients, otherwise dsld will be used again.
		You can find the UPnP settings in the German web UI under
		  Einstellungen
		    System
		      Netzwerkeinstellungen
		        Statusinformationen über UPnP übertragen (empfohlen)
		Thirdly, the usermand patch will also be selected if you activate this option,
		because kernel module userman.ko always depends on kdsldmod.ko which is
		stripped by this patch.

		EXPERIMENTAL FEATURE, USE AT OWN RISK!

config FREETZ_REMOVE_CAPIOVERTCP
	bool "Remove CAPIoverTCP (used for Fritz!Fax) - EXPERIMENTAL"
	default n
	help
		Remove CAPIoverTCP (capiotcp_server). Use this if you don't wat to use
		Fritz!Fax or any other program that uses AVM's CAPIoverTCP. This is similar
		to rcapid, but independant.
		This will save about 15kB uncompressed size.

		EXPERIMENTAL FEATURE, USE AT OWN RISK!

config FREETZ_REMOVE_DECT 
	bool "Remove DECT files - EXPERIMENTAL"
	depends on \
		FREETZ_TYPE_FON_WLAN_7270 || FREETZ_TYPE_SPEEDPORT_W900V_7170
	default n
	help
		Remove dect files (modules, firmware and dect_manager an maybe Config-files).
		(saves roundabout 20K compressed size on W900V)


config FREETZ_REMOVE_DECT_UPDATE
	bool"Remove dect_update - EXPERIMENTAL"
	depends on \
		FREETZ_TYPE_FON_7150
	default n
	help
		Remove /usr/bin/dect_update. This utility is only needed to 
		update the dect firmware.
		This will save about 32kB uncompressed size.

		EXPERIMENTAL FEATURE, USE AT OWN RISK!

config FREETZ_REMOVE_VOIP_ISDN
	bool "Remove VoIP & ISDN files (for non-telephony boxes) - EXPERIMENTAL"
	depends on \
		FREETZ_SHOW_ADVANCED && \
		FREETZ_HAS_PHONE
	select FREETZ_REMOVE_DECT if FREETZ_TYPE_FON_WLAN_7270 
	default n
	help
		Radically remove a lot of telephony-related files. This patch saves about
		2.370 KB or 2.3 MB of uncompressed data size in the firmware image. This
		means savings of about 700 KB of compressed firmware size.

		ATTENTION: Currently there have not been a whole lot of tests concerning
		side effects. The patch was successfully tested on a W701V IP client with
		removed UPnP/dsld/userman. If it still works for boxes including those
		functionalities, is unknown. Feel free to test it.

		NOTE: Corresponding web UI files will also be removed, so you will
		encounter several empty web pages or submenus.

		EXPERIMENTAL FEATURE, USE AT OWN RISK!

config FREETZ_REMOVE_ANNEX_A_FIRMWARE
	bool "Remove Annex A firmware file"
	depends on FREETZ_TYPE_FON_WLAN_7270
	default n
	help
		Remove lib/modules/dsp_ur8/ur8-A-dsl.bin. This saves about 400 KB of
		uncompressed data size.

config FREETZ_REMOVE_ANNEX_B_FIRMWARE
	bool "Remove Annex B firmware file"
	depends on FREETZ_TYPE_FON_WLAN_7270
	default n
	help
		Remove lib/modules/dsp_ur8/ur8-B-dsl.bin. This saves about 400 KB of
		uncompressed data size.

comment "WARNING: Both Annex firmware files will be removed."
	depends on FREETZ_REMOVE_ANNEX_A_FIRMWARE && FREETZ_REMOVE_ANNEX_B_FIRMWARE

endmenu

menu "Package selection"

#config FREETZ_BUILD_DYNAMIC_PACKAGES
#	bool "Build dynamic packages (NOT SUPPORTED YET)"
#	default n
#	help
#		If this is selected, all packages, which are not
#		selected, will be build as dynamic packages.

source make/Config.in

endmenu

menu "Advanced options"

config FREETZ_DL_OVERRIDE
	bool "Override firmware source"
	default n
	help
		Enable this to override automatically generated entries.

config FREETZ_DL_SITE
	string "Firmware site"		if FREETZ_DL_OVERRIDE
	depends on ! FREETZ_TYPE_LABOR
	default "ftp://ftp.avm.de/fritz.box/fritzbox.2170/firmware/deutsch"						if FREETZ_TYPE_2170
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/deutsch"						if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_DE
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/english/annex_a"				if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/english/annex_b"				if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/deutsch"						if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_DE
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/english/annex_a"				if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon/firmware/english/annex_b"				if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_5010/firmware/deutsch_a-ch"			if FREETZ_TYPE_FON_5010 && FREETZ_TYPE_LANG_A_CH
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_5050/firmware"							if FREETZ_TYPE_FON_5050
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_5140/firmware"							if FREETZ_TYPE_FON_5140
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan/firmware/deutsch"					if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_DE
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan/firmware/english/annex_a"			if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan/firmware/english/annex_b"			if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7050/firmware"					if FREETZ_TYPE_FON_WLAN_7050
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7113/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7113
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7140/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_DE
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7140/firmware/deutsch_a-ch"		if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_A_CH
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7140/firmware/english/annex_a"	if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7140/firmware/english/annex_b"	if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7141/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7141
	default "ftp://ftp.avm.de/fritz.box/fritzfon.7150/firmware"								if FREETZ_TYPE_FON_7150
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_DE
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/deutsch_a-ch"		if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_A_CH
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/english/annex_a"	if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7170/firmware/english/annex_b"	if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7270/firmware/deutsch"			if FREETZ_TYPE_FON_WLAN_7270
	default "ftp://ftp.avm.de/fritz.box/fritzbox.sl_wlan/firmware"							if FREETZ_TYPE_WLAN_3020
	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3030/firmware"						if FREETZ_TYPE_WLAN_3030
	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3130/firmware"						if FREETZ_TYPE_WLAN_3130
	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3131/firmware/deutsch"				if FREETZ_TYPE_WLAN_3131
	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3170/firmware/deutsch"				if FREETZ_TYPE_WLAN_3170
	default "ftp://ftp.avm.de/fritz.box/fritzbox.wlan_3270/firmware/deutsch"				if FREETZ_TYPE_WLAN_3270
	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport_W501V" 				if FREETZ_TYPE_SPEEDPORT_W501V
	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport%20W%20701%20V"		if FREETZ_TYPE_SPEEDPORT_W701V
	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport%20W%20900V"			if FREETZ_TYPE_SPEEDPORT_W900V
	default "ftp://ftp.avm.de/fritz.box/..."												if FREETZ_TYPE_CUSTOM

config FREETZ_DL_SOURCE
	string "Firmware source"	if FREETZ_DL_OVERRIDE
	default "FRITZ.Box_2170.51.04.57.image"						if FREETZ_TYPE_2170 && ! FREETZ_TYPE_LABOR
	default "fritz.box_fon.06.04.33.image"						if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_DE
	default "fritz.box_fon.annexa.en.06.04.49.image"				if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "fritz.box_fon.en.06.04.49.image"					if FREETZ_TYPE_300IP_AS_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "fritz.box_fon.06.04.33.image"						if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_DE
	default "fritz.box_fon.annexa.en.06.04.49.image"				if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "fritz.box_fon.en.06.04.49.image"					if FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "fritz.box_fon_5010.annexa.48.04.43.image"				if FREETZ_TYPE_FON_5010 && FREETZ_TYPE_LANG_A_CH
	default "fritz.box_fon_5050.12.04.31.image"					if FREETZ_TYPE_FON_5050
	default "FRITZ.Box_Fon_5140.43.04.59.image"					if FREETZ_TYPE_FON_5140
	default "fritz.box_fon_wlan.08.04.34.image"					if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_DE
	default "FRITZ.Box_Fon_WLAN.AnnexA.en.08.04.49.image"				if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "FRITZ.Box_Fon_WLAN.AnnexB.en.08.04.49.image"				if FREETZ_TYPE_FON_WLAN && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "fritz.box_fon_wlan_7050.14.04.33.image"				if FREETZ_TYPE_FON_WLAN_7050
	default "FRITZ.Box_Fon_WLAN_7113.60.04.61.image"				if FREETZ_TYPE_FON_WLAN_7113
	default "fritz.box_fon_wlan_7140.annexb.30.04.33.image"				if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_DE
	default "FRITZ.Box_Fon_WLAN_7140.AnnexA.en.39.04.57.image"			if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "FRITZ.Box_Fon_WLAN_7140.AnnexB.en.30.04.57.image"			if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "FRITZ.Box_Fon_WLAN_7140.AnnexA.39.04.57.image"				if FREETZ_TYPE_FON_WLAN_7140 && FREETZ_TYPE_LANG_A_CH
	default "FRITZ.Box_Fon_WLAN_7141.40.04.59.image"				if FREETZ_TYPE_FON_WLAN_7141 && ! FREETZ_TYPE_LABOR
	default "fritz_box_40_04_59-11763M.image"						if FREETZ_TYPE_FON_WLAN_7141 && FREETZ_TYPE_LABOR_MINI
	default "FRITZ.Fon_7150.AnnexB.38.04.56.image"					if FREETZ_TYPE_FON_7150
	default "FRITZ.Box_Fon_WLAN_7170.29.04.59.image"				if FREETZ_TYPE_FON_WLAN_7170 && ! FREETZ_TYPE_LABOR && FREETZ_TYPE_LANG_DE
	default "FRITZ.Box_Fon_WLAN_7170.AnnexA.58.04.57.image"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_A_CH
	default "FRITZ.Box_Fon_WLAN_7170.AnnexA.en.58.04.57.image"			if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_A
	default "FRITZ.Box_Fon_WLAN_7170.AnnexB.en.29.04.57.image"			if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LANG_EN && FREETZ_TYPE_ANNEX_B
	default "fritz_box_7170-beta-10954.image"					if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_BETA
	default "FRITZ.Box_Fon_WLAN_7170.Labor.29.04.63-12537.image"				if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_ALL
	default "fritz_box-labor-12526.image"						if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_DSL
	default "Labor_FRITZ.Box_Fon_WLAN_7170_LabGAMING.AnnexB.29.04.93-11435.image"	if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_GAMING
	default "fritz_box_29_04_59-11763M.image"					if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_MINI
	default "FRITZ.Box_Fon_WLAN_7170_LabPHONE.AnnexB.29.04.97-10173.image"		if FREETZ_TYPE_FON_WLAN_7170 && FREETZ_TYPE_LABOR_PHONE
	default "FRITZ.Box_Fon_WLAN_7270.54.04.59.image"				if FREETZ_TYPE_FON_WLAN_7270 && ! FREETZ_TYPE_LABOR
	default "FRITZ_Box_Fon_WLAN_7270-beta-10576.image"				if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_BETA
	default "FRITZ.Box_Fon_WLAN_7270.Labor.54.04.63-12657.image"			if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_ALL
	default "fritz_box_54_04_59-11779M.image"					if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_MINI
	default "FRITZ.Box_Fon_WLAN_7270_LabPHONE.AnnexB.54.04.97-11197.image"		if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_PHONE
	default "FRITZ.Box_Fon_WLAN_7270_LabCORE.AnnexB.54.04.98-12028.image"		if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_WLAN
	default "FRITZ.Box_Fon_WLAN_7270_LabGAMING.AnnexB.54.04.93-11632.image"		if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_GAMING
	default "fritz_box-labor-12606.image"						if FREETZ_TYPE_FON_WLAN_7270 && FREETZ_TYPE_LABOR_DSL
	default "fritz.box_sl_wlan.09.04.34.image"					if FREETZ_TYPE_WLAN_3020
	default "fritz.box_wlan_3030.21.04.34.image"					if FREETZ_TYPE_WLAN_3030
	default "fritz.box_wlan_3130.44.04.34.image"					if FREETZ_TYPE_WLAN_3130
	default "fritz.box_wlan_3131.50.04.57.image"					if FREETZ_TYPE_WLAN_3131
	default "fritz.box_wlan_3170.49.04.58.image"					if FREETZ_TYPE_WLAN_3170
	default "fritz.box_wlan_3270.67.04.57.image"					if FREETZ_TYPE_WLAN_3270
	default "fw_Speedport_W501V_v_28.04.38.image"					if FREETZ_TYPE_SPEEDPORT_W501V
	default "fw_Speedport_W701V_v33.04.57.image"					if FREETZ_TYPE_SPEEDPORT_W701V
	default "fw_Speedport_W900V_v34.04.57.image"					if FREETZ_TYPE_SPEEDPORT_W900V
	default "fritz.box..."								if FREETZ_TYPE_CUSTOM

config FREETZ_DL_SITE2
	string "AVM web interface DL Site"		if FREETZ_DL_OVERRIDE
	depends on \
		FREETZ_TYPE_SINUS_W500V_7150 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W701V_7170 || \
		FREETZ_TYPE_SPEEDPORT_W900V || \
		FREETZ_TYPE_SPEEDPORT_W900V_7170
	default "http://www.t-home.de/dlp/eki/downloads/Sinus%20W%20500%20V"				if FREETZ_TYPE_SINUS_W500V_7150
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7141/firmware/deutsch"		if FREETZ_TYPE_SPEEDPORT_W501V
	default "ftp://ftp.avm.de/fritz.box/fritzbox.fon_wlan_7141/firmware/deutsch" 		if FREETZ_TYPE_SPEEDPORT_W701V
	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport%20W%20701%20V"	if FREETZ_TYPE_SPEEDPORT_W701V_7170
	default "ftp://ftp.avm.de/fritz.box/fritzfon.7150/firmware"							if FREETZ_TYPE_SPEEDPORT_W900V
	default "http://www.t-home.de/dlp/eki/downloads/Speedport/Speedport%20W%20900V"		if FREETZ_TYPE_SPEEDPORT_W900V_7170

config FREETZ_DL_SOURCE2
	string "AVM web interface firmware source"	if FREETZ_DL_OVERRIDE
	depends on \
		FREETZ_TYPE_SINUS_W500V_7150 || \
		FREETZ_TYPE_SPEEDPORT_W501V || \
		FREETZ_TYPE_SPEEDPORT_W701V || \
		FREETZ_TYPE_SPEEDPORT_W701V_7170 || \
		FREETZ_TYPE_SPEEDPORT_W900V || \
		FREETZ_TYPE_SPEEDPORT_W900V_7170
	default "fritz.box_fon_wlan_7141.40.04.37.image"	if FREETZ_TYPE_SPEEDPORT_W501V
	default "fritz.box_fon_wlan_7141.40.04.37.image"	if FREETZ_TYPE_SPEEDPORT_W701V
	default "fw_Speedport_W701V_v33.04.57.image"		if FREETZ_TYPE_SPEEDPORT_W701V_7170
	default "fritz.fon_7150.annexb.38.04.32.image"		if FREETZ_TYPE_SPEEDPORT_W900V
	default "fw_Speedport_W900V_v34.04.57.image"		if FREETZ_TYPE_SPEEDPORT_W900V_7170
	default "Sinus_W_500V.27.04.27.image"			if FREETZ_TYPE_SINUS_W500V_7150


config FREETZ_DL_SOURCE2_CONTAINER
	string
	depends on \
		FREETZ_TYPE_SINUS_W500V_7150
	default "fw_SinusW500V_27_04_27.zip"			if FREETZ_TYPE_SINUS_W500V_7150


menu "Freetz package download sites"

# This is a fixed entry, it is invisible and cannot be changed by the user
config FREETZ_MOD_DL_NUM_SITES
	string
	default "5"

comment "Download site #1 - default: http://freetz.3dfxatwork.de"

config FREETZ_MOD_DL_SITE_1
	string ""
	default "http://freetz.3dfxatwork.de"
	help
		Download site #1 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
		build process, all mirrors defined here are triggered on a random basis,
		so as not to always use a certain mirror first. This is a cheap kind of
		load balancing.

		Note: We recommend you to only set #5 to a user-defined value, if
		necessary. Necessary means that #1 - #4 are currently unavailable or
		the desired package cannot be found on either of them. In addition to
		the default servers #1 and #2, many packages have another server name
		in their make file, so a user-defined mirror should rarely be necessary.

comment "Download site #2 - default: http://freetz.wirsind.info"

config FREETZ_MOD_DL_SITE_2
	string ""
	default "http://freetz.wirsind.info"
	help
		Download site #2 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
		build process, all mirrors defined here are triggered on a random basis,
		so as not to always use a certain mirror first. This is a cheap kind of
		load balancing.

		Note: We recommend you to only set #5 to a user-defined value, if
		necessary. Necessary means that #1 - #4 are currently unavailable or
		the desired package cannot be found on either of them. In addition to
		the default servers #1 and #2, many packages have another server name
		in their make file, so a user-defined mirror should rarely be necessary.

comment "Download site #3 - default: http://freetz.magenbrot.net"

config FREETZ_MOD_DL_SITE_3
	string ""
	default "http://freetz.magenbrot.net"
	help
		Download site #3 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
		build process, all mirrors defined here are triggered on a random basis,
		so as not to always use a certain mirror first. This is a cheap kind of
		load balancing.

		Note: We recommend you to only set #5 to a user-defined value, if
		necessary. Necessary means that #1 - #4 are currently unavailable or
		the desired package cannot be found on either of them. In addition to
		the default servers #1 and #2, many packages have another server name
		in their make file, so a user-defined mirror should rarely be necessary.

comment "Download site #4 - default: empty (reserved for later use)"

config FREETZ_MOD_DL_SITE_4
	string ""
	help
		Download site #4 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
		build process, all mirrors defined here are triggered on a random basis,
		so as not to always use a certain mirror first. This is a cheap kind of
		load balancing.

		Note: We recommend you to only set #5 to a user-defined value, if
		necessary. Necessary means that #1 - #4 are currently unavailable or
		the desired package cannot be found on either of them. In addition to
		the default servers #1 and #2, many packages have another server name
		in their make file, so a user-defined mirror should rarely be necessary.

comment "Download site #5 - user-defined"

config FREETZ_MOD_DL_SITE_5
	string ""
	help
		Download site #5 for Freetz packages like 'mc-4.5.0-freetz-0.2.tar.bz2',
		*not* for original software packages like 'mc-4.5.0.tar.gz'. During the
		build process, all mirrors defined here are triggered on a random basis,
		so as not to always use a certain mirror first. This is a cheap kind of
		load balancing.

		Note: We recommend you to only set #5 to a user-defined value, if
		necessary. Necessary means that #1 - #4 are currently unavailable or
		the desired package cannot be found on either of them. In addition to
		the default servers #1 and #2, many packages have another server name
		in their make file, so a user-defined mirror should rarely be necessary.

endmenu

config FREETZ_VERBOSITY_LEVEL
	int "Verbosity level (0-2)"
	default 2
	help
		Verbosity level of the fwmod script and tar.
		0 is the least and 2 the most information.

choice

	prompt "Favicon"
	default FREETZ_FAVICON_NONE
	help
		Adds small favicons to the document root.

	config FREETZ_FAVICON_NONE
		bool "none"

	config FREETZ_FAVICON_DSL123
		bool "dsl123's favicons"

	config FREETZ_FAVICON_CUMA
		bool "cuma's favicons"

	config FREETZ_FAVICON_HANSOLO
		bool "han-solo's favicons"
endchoice

config FREETZ_FAVICON_STRING
	string
	default "none"			if FREETZ_FAVICON_NONE
	default "dsl123"		if FREETZ_FAVICON_DSL123
	default "cuma"			if FREETZ_FAVICON_CUMA
	default "hansolo"		if FREETZ_FAVICON_HANSOLO

config FREETZ_SUBVERSION_STRING
	bool "Add Freetz version to subversion string"
	default y
	help
		Add Freetz version to subversion string, e.g. -11945-freetz-devel-2417.
		Disable this if you have trouble with your isp or plugin downloads from
		AVM don't work. 
		
		Please only disable this option if you really need to!

config FREETZ_DEVELOPER_VERSION_STRING
	bool "Developer version string"
	depends on FREETZ_SUBVERSION_STRING
	default y 
	help
		Add SVN (Subversion) repository revision number to firmware image name
		and to /etc/.subversion, /etc/version within firmware itself.

		The revision number string is generated by the client command line tool
		svnversion and may include switch/modify flags and/or a range of
		version numbers, depending on the current state of the working
		directory at the time of generation. See 'svnversion --help' for
		details.

		ATTENTION! This option is for developers working on checked-out
		versions of the Freetz source code only and requires svnversion to be
		installed.

menu External
config EXTERNAL_ENABLED
	bool "Enable external processing"
	default n
	help
		Enable this to move (big) files out of the firmware-image onto
		an attached USB device or a mounted network share like SMB or NFS.

		-------------------------- WARNING ----------------------------------
		Move all the files from build/modified/external to your choosen
		directory on the box BEFORE you flash the reduced image!
		
		-------------------------- WARNING ----------------------------------
		Do NOT external files needed to boot up Freetz!
		
		------------------------- ADVANCED ----------------------------------
		You could external services (like Samba) too. First set the service
		startup to "manual". Then enable the autorun/autoend feature of
		Freetz and create these files in the root of your device:
		[autorun.sh]
		/etc/init.d/rc.XYZ start
		[autoend.sh]
		/etc/init.d/rc.XYZ stop

config EXTERNAL_DOWNLOADER
	bool "Prepare files for Downloader"
	default n
	depends on EXTERNAL_ENABLED && FREETZ_PACKAGE_DOWNLOADER
	help
		Prepare files for Downloader package. 
		Downloader loads usualy files from a http or ftp server into the RAM of the box.

config EXTERNAL_SUBDIRS
	bool "Keep subdirectories"
	default n if ! EXTERNAL_DOWNLOADER
	default y if EXTERNAL_DOWNLOADER
	depends on EXTERNAL_ENABLED
	help
		Keep the original directory structure

config EXTERNAL_CREATEPAK
	bool "Create file for upload" if ! EXTERNAL_DOWNLOADER
	default y
	depends on EXTERNAL_ENABLED && ! EXTERNAL_DOWNLOADER
	help
		Creates a file for upload with the webinterface

choice

	prompt "external directory"
	default EXTERNAL_DIR1 if ! EXTERNAL_DOWNLOADER
	default EXTERNAL_DIR3 if EXTERNAL_DOWNLOADER
	depends on EXTERNAL_ENABLED
	help
		The directory on the Freetz Box with the externald files

	config EXTERNAL_DIR1
		depends on ! EXTERNAL_DOWNLOADER
		bool "/var/media/ftp/uStor01/external/"

	config EXTERNAL_DIR2
		depends on ! EXTERNAL_DOWNLOADER
		bool "/var/media/ftp/uStor02/external/"

	config EXTERNAL_DIR3
		depends on EXTERNAL_DOWNLOADER
		bool "/mod/"

	config EXTERNAL_CUSTOM_DIR
		bool "custom directory"

endchoice

config EXTERNAL_CUSTOM_DIRNAME
	string "custom directory" if EXTERNAL_CUSTOM_DIR
	default "/var/media/ftp/uStor01/external/"
	depends on EXTERNAL_ENABLED && EXTERNAL_CUSTOM_DIR
	help
		Custom directory on the Freetz Box with the externald files

config EXTERNAL_DIRECTORY
	string
	default "/var/media/ftp/uStor01/external/" if EXTERNAL_DIR1
	default "/var/media/ftp/uStor02/external/" if EXTERNAL_DIR2
	default "/mod/" if EXTERNAL_DIR3
	default EXTERNAL_CUSTOM_DIRNAME if EXTERNAL_CUSTOM_DIR
	depends on EXTERNAL_ENABLED

config EXTERNAL_OWN_FILES
	string "own files"
	default ""
	depends on EXTERNAL_ENABLED && FREETZ_SHOW_ADVANCED
	help
		Put your own files/directorys here (space seperated)

source make/external.in

endmenu

choice

	prompt "SquashFS block size"
	default FREETZ_SQUASHFS_BLOCKSIZE_65536

	config FREETZ_SQUASHFS_BLOCKSIZE_ORIG
		bool "original (usually 64 KB)"
		help
			Block size of the root filesystem. SquashFS 2.x can use block sizes
			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
			compression ratios than smaller ones.

			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
			anything smaller because your firmware image will grow unnecessarily.

			Note: Currently anything above 128 KB will result in a kernel panic, thus
			we do not allow it.

	config FREETZ_SQUASHFS_BLOCKSIZE_16384
		bool "16 KB"
		help
			Block size of the root filesystem. SquashFS 2.x can use block sizes
			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
			compression ratios than smaller ones.

			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
			anything smaller because your firmware image will grow unnecessarily.

			Note: Currently anything above 128 KB will result in a kernel panic, thus
			we do not allow it.

	config FREETZ_SQUASHFS_BLOCKSIZE_32768
		bool "32 KB"
		help
			Block size of the root filesystem. SquashFS 2.x can use block sizes
			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
			compression ratios than smaller ones.

			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
			anything smaller because your firmware image will grow unnecessarily.

			Note: Currently anything above 128 KB will result in a kernel panic, thus
			we do not allow it.

	config FREETZ_SQUASHFS_BLOCKSIZE_65536
		bool "64 KB"
		help
			Block size of the root filesystem. SquashFS 2.x can use block sizes
			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
			compression ratios than smaller ones.

			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
			anything smaller because your firmware image will grow unnecessarily.

			Note: Currently anything above 128 KB will result in a kernel panic, thus
			we do not allow it.

	config FREETZ_SQUASHFS_BLOCKSIZE_131072
		bool "128 KB (EXPERIMENTAL)"
		depends on FREETZ_REPLACE_KERNEL
		help
			Block size of the root filesystem. SquashFS 2.x can use block sizes
			up to 64 KB, SquashFS 3.x (only available for 7270 firmware or with
			"replace kernel") up to 1024 KB. Bigger block sizes achieve better
			compression ratios than smaller ones.

			64 KB is the default for kernel 2.6 firmwares, we recommend not to use
			anything smaller because your firmware image will grow unnecessarily.

			Note: Currently anything above 128 KB will result in a kernel panic, thus
			we do not allow it.

#	config FREETZ_SQUASHFS_BLOCKSIZE_262144
#		bool "256 KB"
#		depends on FREETZ_REPLACE_KERNEL

#	config FREETZ_SQUASHFS_BLOCKSIZE_524288
#		bool "512 KB"
#		depends on FREETZ_REPLACE_KERNEL

#	config FREETZ_SQUASHFS_BLOCKSIZE_1048576
#		bool "1024 KB"
#		depends on FREETZ_REPLACE_KERNEL

endchoice

menu "BusyBox options"
	depends on FREETZ_REPLACE_BUSYBOX
	source make/busybox/Config.in
endmenu

menu "Kernel modules"
	source kernel/Config.in
endmenu

menu "Shared libraries"
	config FREETZ_STRIP_LIBRARIES
		bool "Run mklibs on the built root filesystem"
		default n
		help
			Recompiles all the shared libraries to only include the
			symbols actually needed to run the binaries on the target.

			EXPERIMENTAL FEATURE, USE AT OWN RISK!
	comment "Libraries -------------------------------"

	source make/libs/Config.in
endmenu

menu "Compiler options"

choice
	prompt "Toolchains"
	default FREETZ_DOWNLOAD_TOOLCHAIN
	help
		Download Toolchain, build toolchain

	config FREETZ_DOWNLOAD_TOOLCHAIN
		bool "Download and use precompiled toolchain"

	config FREETZ_BUILD_TOOLCHAIN
		bool "Build toolchain (requires 4GB diskspace)"
endchoice

config FREETZ_TARGET_CROSS
	string
	default "mipsel-linux-uclibc-"

config FREETZ_TARGET_MAKE_PATH
	string
	default "toolchain/target/bin"

config FREETZ_TARGET_CFLAGS
	string "Target compiler flags"
	default "-Os -pipe -march=4kc -Wa,--trap"

config FREETZ_JLEVEL
	int "Number of jobs to run simultaneously"
	default "2"
	help
		Number of jobs to run simultanesouly

config FREETZ_KERNEL_CROSS
	string
	default "mipsel-unknown-linux-gnu-"

config FREETZ_KERNEL_MAKE_PATH
	string
	default "toolchain/kernel/bin"

config FREETZ_HOSTCC
	string "Host compiler"
	default "gcc"
	help
		Set host compiler (default: gcc). To speed up compiling host
		binarys it can be reasonable to set "ccache gcc" instead of
		only "gcc".
		
source toolchain/Config.in

endmenu

endmenu

Auf das Freetz Webinf komme ich ohne Probleme drauf.......

hermann72pb · 26 Okt 2008

und wo ist deine .config? Warum schaut ihr nicht zunächst mal rein, was ihr hier postet?

Ich tippe mal, dass du bei 1und1 bist und tr069-Probleme hast.

MfG

henfri · 26 Okt 2008

Hallo,

ich habe das gleiche Problem.
Im Titel steht 'gelöst' aber sorry, ich sehe die Lösung nicht. Was muss ich machen?

Gruß,
Hendrik

hermann72pb · 26 Okt 2008

Wir können nicht hell sehen, Hendrik. Poste bitte hier mehr Angaben (Box, .config, Provider, Branding) oder leg dir eine Signatur zu.

MfG

chriwi · 5 Jun 2009

Ich habe schienbar ein ähnliches Problem:
- habe eine FB7170
- habe einen 1&1 Komplettanschluß und habe diesen irgendwann einmal mit Startercode eingerichtet
- vorher lief mit ner ca. 6 Monatte alten Firmware mit nem entsprechenden freetz alles einwandfrei
- jetzt habe ich mir einen neune Freetz-Trunk (29.04.70freetz-devel-3383) mit "remove assisant" gebaut und über AVM-Webinterface geflasht

danach läuft allessuper inclusive Freetz-Webinterface nur bei http://fritz.box kommt ne leere seite "telnet fritz.box" geht aber. Remote-Access über https:// ist auch eingerichtet bringt aber auch ne leere Seite aber zuindest über Proxy kein Timeout.

Woran kann das liegen?

hier mal der Quelltext der bei der augenscheinlich leeren Seite hinterlegt ist (bin mir aber nicht sicher ob der von der Fritzbox oder nur vom Proxy kommt)

Code:

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>XXXXXXXXXX Proxy Service: Error</title>
<style type="text/css">
<!--
body {
    margin-left: 2%;
    margin-right: 2%;
}
p {
    font-family: verdana, Arial, Helvetica, sans-serif;
    font-size: 12px;
    top: 0px;
    margin-top: 6px;
    margin-bottom: 6px;
}
td {
    font-family: verdana, Arial, Helvetica, sans-serif;
    font-size: 12px;
    top: 0px;
}
.code {
    font-family: courier;
    font-size: 12px;
    top: 0px;
}
h1 {
    font-family: verdana, Arial, Helvetica, sans-serif;
    font-size: 20px;
    margin-top: 24px;
    margin-bottom: 12px;
}
h2.error {
    font-family: verdana, Arial, H

Sieht aber irgendwie unvollständig aus
.

hermann72pb · 5 Jun 2009

Und wo ist das Problem es mit dem Assistenten und mit tr069 zu bauen? Wie gesagt, bei 1und1-Branding (und Nutzung) ist es anzuraten beide Sachen nicht rauszupatchen.
Wo ist deine .config? Wir haben die Glaskugel gerade nicht da.
Hast du irgendwas SSL-enthaltenes auf der Box?

MfG

chriwi · 6 Jun 2009

tr069 habe ich ja nicht rausgepatcht und ohne den nutzlosen Assistenten rauszuschmeissen reicht der Platz auf der FB7170 nichtmal für DNSMASQ + Callmonitor, von IPV6, Dropbear oder MC ganz zu schweigen.
Gibt es keine Lösung das auch bei 1&1 ohne den Assistenten zu machen?
.

colonia27 · 6 Jun 2009

Schau mal mit telnet/ssh mit ps ob der ctlmgr-Prozess läuft.
Bei mir tut er das seltsamerweise derzeit nach einem Reboot auch nicht mehr mit aktuellem trunk -3385 auf der aktuellen AIO-Labor an meiner enbrandeten 7270.
(Signatur ist nicht aktuell)
Nach manueller Eingabe von ctlmgr in der Konsole tuts alles wieder bis zum reboot

P.s. für alle die meine .config jetzt vermissen, die kann ich gerade nicht anhängen.

chriwi · 6 Jun 2009

Danke colonia,

der Prozeß lief definitiv nicht, wenn ich ihn von Hand starte beendet er sich nach kurzer Zeit wieder ohne jegliche message und auch mit -m wird kein Logfile angelegt, starte ich ihn dagegen im Fordergrund bekomme ich folgende Meldungen:

Code:

/var/mod/root # ctlmgr -f
1 samba users written to /var/samba/private/smbpasswd

*** 2009-06-06 10:11:36(1) [Segmentation fault] ctlmgr(3298) CRASHED at md5_block_data_order+0x48 (/usr/lib/libcrypto.so.0.9.8 at 000353cc) accessing _gp+0x29bd52e1 (/usr/share/ctlmgr/libtr069.so at 29c2dd81) ***
Segmentation fault
/var/mod/root #

olistudent · 6 Jun 2009

Du darfst die Openssl-Libs nicht auswählen/ersetzen.

MfG Oliver

chriwi · 6 Jun 2009

Danke Olistudent,

ich hatte die openssl libs zwar nicht mehr bewußt mit drin, sie waren auch in menuconfig nirgends mehr ausgewählt und ich habe vor dem letzten make ein dirclean gemacht nachdem ich früher mal openvpn und dropbaer mit ausgewählt hatte aber irgendwie müssen die wohl doch drin geblieben sein.
Jetzt habe ich Freetz-trunk nochmal komplett gelöscht und neu ausgecheckt (habe jetzt eine 3385) und nun funktioniert auch das AVM-Webinterface.
Keine Ahnung was da vorher falsch gelaufen ist.
.

hermann72pb · 6 Jun 2009

Die libs werden nicht automatisch abgewählt, die muss man schon entweder manuell abwählen oder "make config-clean-deps" machen.
Assistenten würde ich an deiner Stelle drin lassen. Hilfe könnte man rauspatchen. Damit gab es bisher keine Probleme. Vielleicht den ganzen MINI-Gedönst und Mediaserver. Das bringt wirklich viel Platz. Ansonsten kann man einige Sachen externalisieren. Das funktioniert hervorragend, wenn man nicht übertreibt.

MfG

colonia27 · 6 Jun 2009

So, hier dann auch meine .config wie in #8 versprochen.

Wie ich das sehe, gehts doch hier um die libssl, oder?
Wenn ja, brauch ich diese denn nicht für meine Pakete so wie ich sie lt. config habe?

Das Problem, kein AVM-Web-IF, hatte ich bis jetzt nie und die Pakete sind auch eigentlich immer die selben geblieben. Also ovpn, vsftpd, firewall, transmission und div. Kleinigkeiten.

[EDIT] anscheinend liegt es zumindest bei mir nich an irgend nem ssl-Kram. Hier ist ebenfalls ein Thread, der (zumindest) mein Problem genauer trifft.

sf3978 · 6 Jun 2009

# SSL ------------------------------------
#
# FREETZ_LIB_libcyassl is not set
# FREETZ_LIB_libmatrixssl is not set
# FREETZ_LIB_libxyssl is not set
FREETZ_LIB_libcrypto=y
FREETZ_LIB_libssl=y
# FREETZ_LIB_libavmhmac is not set

Evtl. wird hier die libcrypto benötigt:

FREETZ_PACKAGE_LIGHTTPD=y
FREETZ_PACKAGE_LIGHTTPD_WITH_SSL=y
FREETZ_PACKAGE_LIGHTTPD_WITH_ZLIB=y
FREETZ_PACKAGE_LIGHTTPD_LDD=y

Languages

Suche

Languages

Suche

[gelöst] Webinterface ab und an nicht mehr erreichbar wo liegt das Problem ?

BoxcarRacer

Guest

hermann72pb

IPPF-Promi

henfri

Mitglied

hermann72pb

IPPF-Promi

chriwi

Mitglied

hermann72pb

IPPF-Promi

chriwi

Mitglied

colonia27

Guest

chriwi

Mitglied

olistudent

IPPF-Urgestein

chriwi

Mitglied

hermann72pb

IPPF-Promi

colonia27

Guest

Anhänge

sf3978

IPPF-Promi

Zurzeit aktive Besucher

Neueste Beiträge

Statistik des Forums