Suchergebnisse

Hmm. I'm not sure what went wrong with your script. I've attached mine below. You should get an ifb0 as soon as you load the ifb.ko module. It won't be 'up'. Try ifconfig ifb0 before and after loading ifb.ko. One thing I noticed is that the AVM kernel has very limited memory for modules. If you...

in a rush atm: make menuconfig packages standard packages iproute2 My patches install it as 'tc2' (you need to normal 'tc' for the AVM stuff). EDIT: I just realized you will still need ifb+sch_mirrored. sch_egress is shit. Using ifb you can use ingress shaping on egress like I do in my...

When I say wireless I mean like using a laptop without a cable, not UMTS. You sure you don't need wireless? If you apply my patch the freetz trunk, you should be able to get a working tc in your firmware.

Yes. You need to recompile 'tc'. The one in the 7390 does not support the features you need, hence problem #1. You cannot shape the DSL link because it is somehow strange. At least I didn't succeed. My solution instead shapes the ethernet and wireless traffic that will go in/out of the DSL...

So happy, now. Got two downloads going and ping to google is 60ms average, 120ms max. :-) Finally the relatives won't ruin my guild wars 2 experience! ;) For reference, without downstream QoS, I had average 2.5s ping spiking to 4s. So this is around a 40* improvement. Makes web pages load nice...

Here is a patch that makes the necessary changes to freetz-trunk: Index: make/linux/Config.iks.7390_05.50 =================================================================== --- make/linux/Config.iks.7390_05.50 (revision 10304) +++ make/linux/Config.iks.7390_05.50 (working copy) @@ -1,7 +1,7...

So, I got it to work, finally. There are two problems: 1- The device 'adsl' is atm and doesn't play well with any normal tools 2- There is an AVM packet accelerator that hides packets from linux The solution to get working downstream qos: 1- Disable avm_pa: echo disable >...

Good evening! I recently bought a Fritz!Box 7390 to replace my aging Asus WL-500g (with openwrt). My DSL is very slow; 200kB/s downstream and 20kB/s upstream. Whenever downloading something, the massive buffers at the ISP fill up and I see upwards of 3s of latency to ping google. With the...

So, as I understand it, you had working: Horstbox ADSL modem connected to O2 (VPI/VCI=1/32) Openwrt router connected to Horstbox (using PPPoE) Linux box running Asterisk connected to Openwrt ... and the complete setup worked stable for you. You are only using a single PPPoE channel and...

Well, after more testing, I am fairly certain that it is NOT my asterisk configuration. Things work 100% perfectly for some time after setting up the PPPoE channel. Then I get the 'password wrong' messages on outgoing calls. Reset the PPPoE link and all will work again... for some...

I was hit recently by the change O2 put through that broke my asterisk. I've found settings that work after these changes. I can both place and receive calls, and the sound quality is good. However, after about an hour of having connected the router, out-going calls start failing with...